Monthly Archives: November 2023

Jurassic Park (1993)

by

2

Our first example is a single scene from Jurassic Park, set entirely in the control room of Isla Nublar. Apologies in advance for repeating some material already covered by the book and website, but it is necessary to focus on the aspects that are of interest to this study.

Drs. Sattler and Grant enter the control room along with Lex and Tim. Jurassic Park (1993)

The eponymous Jurassic Park is heavily automated, with the entire park designed to be controlled from the computer systems in this room. Villainous computer system designer Nedry took advantage of this to shut down systems across the entire park, releasing all the dinosaurs, to cover his industrial espionage. Most of the park staff had already been evacuated due to a storm warning, and the small team of core technical staff who remained have, by this point in the film, all been killed by dinosaurs. (Including Nedry—who, had he been given time for extrospection, would probably have rethought those aspects of his plan concerning the release of carnivorous dinosaurs.)

Four of the survivors have gathered in the control room after managing to restore the power, but must still restart the various computer systems. They have discovered that the computer control extends down to door locks, which are consequently not working and have suddenly become the number one priority due to the velociraptors trying to break in.

Our interface user is Lex, a teenage visitor, being given an advance tour of the park before its official opening. The others are Dr Grant, paleontologist; Dr Sattler, paleobotanist; and Lex’s younger brother Tim, dinosaur enthusiast. As a self -described computer hacker Lex is easily the best person qualified to work with the computers as everyone else in the room only has expertise in subjects more than sixty-six million years old.

Lex sitting before the computer and looking at the /usr directory in the 3D file browser. Jurassic Park (1993)

The computers were all rebooted when the power came back on but the programs that control Jurassic Park did not automatically restart. Dr. Sattler spent a moment in front of the computer with Lex, but all she seemed to do is deactivate the screen saver. It’s up to Lex to find and start whatever program runs the security systems for the control room.

Backworlding aside: Unix-savvy viewers might be wondering why these control programs, since they are critical to the park functionality, don’t automatically start when the computer is rebooted. I hazard that perhaps normally they would, but Nedry turned this off to ensure that no-one could undo his sabotage before he got back.
The file system of the computer is rendered as a tree, with directory names (/usr in the image above) shown as text labels, the contents of each directory shown as LEGO-like blocks, and lines linking directories to subdirectories.

The park directory, and two levels of subdirectories in the distance. Jurassic Park (1993)

Most of the information is drawn on a flat two-dimensional plane. The third dimension is used to present information about the number of, and perhaps sizes, of the files in each directory. Note in the image above that the different directories below the foremost park block have different sized heights and areas.

Rendering this plane in perspective, rather than as a conventional 2D window, means that areas closest to the viewpoint can be seen in detail, but there is still some information given about the directories further away. In the image above, the subdirectory of park on the right is clearly smaller than the others, even though we can’t make out the actual name, and also has a number of larger subdirectories.

Up close we can see that each file can have its own icon on top, presumably representing the type of file.

Individual blue files within one directory, and subdirectories beyond. Jurassic Park (1993)

The viewpoint stays at a constant height above the ground plane. Moving around is done with the mouse, using it as a game-style directional controller when the mouse button is held down rather than as an absolute pointing device. It is almost “walking” rather than “flying” but there is a slight banking effect when Lex changes direction.

Closeup of Lex’s hand on the mouse, pressing the left mouse button. Jurassic Park (1993)

Here Lex has browsed through the hierarchy and discovered a promising file. She selects it, but we don’t see how, and a spotlight or sunbeam indicates the selection.

The “Visitors Center” icon highlighted by a beam from above. Jurassic Park (1993)

This is the last of the 3D interactions. The 3D file browser is just a file browser, not an entire operating system or virtual environment, so opening a file or program will open a new interface.

Tagged: 3D, 3D rendering, blue, cathode ray tube, color, comparison, constant movement, control room, cyan, desk, direct manipulation, disambiguation, finger press, flight control, flying, green, icon, interaction design, light, lighting, map, missing information, motion cue, navigating, pink, point to select, projection rays, selection, sense making, stress, up is more

When Lex runs this program (again, we don’t see how) it is in fact the security system controller for the visitor centre, including the control room. This has a conventional 2D GUI interface and she immediately switches everything on.

The 2D GUI. Security window in green on left, boot progress screen in blue on right. Jurassic Park (1993)

Success! Well, it would be if the control room did not also have very large windows which are apparently not velociraptor-proof. But the subsequent events, and interfaces, are not our concern.

Analysis

This isn’t a report card, since those are given to complete films or properties, not individual interfaces. But we can ask the same questions.

How believable is the interface?

In this case, very believable. The 3D file browser seen in the film is a real program that was shipped with the computers used in the film. It was created by the manufacturer Silicon Graphics as a demonstration of 3D capabilities, not as an effect just for this film.

How well does the interface inform the narrative of the story?

It supports the narrative, but isn’t essential — there’s plenty of drama and tension due to the velociraptors at the door, and the scene would probably still work if the camera only showed Lex, not the interface. The major contribution of using the 3D file browser is to keep the technology of Jurassic Park seemingly a little more advanced than normal for the time. Apart from dinosaurs, both the book and the film try not to introduce obviously science fictional elements. A 2D file browser (they did exist for Unix computers at the time, including the SGI computers shown in the film) would have been recognisable but boring. The 3D file browser looks advanced while still being understandable.

How well does the interface equip the characters to achieve their goals?

The most interesting question, to which the answer is that it works very well. One problem, visible in the film, is that because the labels are rendered on the 2D ground plane, users have to navigate close to a file or a folder to read its name. Rotating the names to vertical and to always face the user (“billboarding”) would have made them recognisable from further away.

Both at the time of the film and today some computer people will argue that Lex can’t be a real computer hacker because she doesn’t use the command line interface. Graphical user interfaces are considered demeaning. I disagree.
Lex is in a situation familiar to many system administrators, having to restore computer functionality after an unexpected power loss. (Although the velociraptors at the door are a little more hostile than your typical user demanding to know when the system will be back up.) Earlier in the film we saw Ray Arnold, one of the technical staff, trying to restore the system and he was using the command line interface.

Ray Arnold sitting before SGI computer, typing into blue command line window. Jurassic Park (1993)

So why does Lex use the 3D file browser? Because, unlike Ray Arnold, she doesn’t know which programs to run. Rebooting the computers is not enough. The various programs that control Jurassic Park are all custom pieces of software developed by Nedry, and nothing we’ve seen indicates that he would have been considerate enough to write a user guide or reference manual or even descriptive file names. Everyone who might have known which programs do what is either dead or off the island.

Lex needs an interface that lets her quickly search through hundreds or even thousands of files without being able to specify precise search criteria. For a problem involving recognition, “you’ll know it when you see it”, a graphical user interface is superior to a command line.

Film making challenge: diegetic computers

Writing for SciFiInterfaces can be quite educational. Chris asked me to write about the “diegetic” aspects of rendering 3D graphics in film, and I agreed to do so without actually knowing what that meant. Fortunately for me it isn’t complicated. Diegetic images or sounds belong to what we see in the scene itself, for instance characters and their dialog or hearing the music a violinist who is on-screen is playing; while non-diegetic are those that are clearly artefacts of watching a film, such as subtitles, voice overs, or the creepy violin music that is playing as a character explores a haunted house—we don’t imagine there is some violinist in there with them.

So, SciFiinterfaces.com focuses on the diegetic computer interfaces used by characters within the film or TV show itself. We’ve just been discussing the 3D file browser in Jurassic Park. Which, since it was a real interactive program, just meant pointing a camera at the actor and the computer screen, right?

It’s not that easy. Our human eyes and brain do an enormous amount of interpolation and interpretation of what we actually see. There’s the persistence of vision effect that allows us to watch a film in a cinema and see it as fluid motion, even though for a significant percentage of the time we’re actually looking at a blank wall while the projector shutter is closed. Cameras, whether film or digital, take discrete snapshots and are not so easily fooled, leading to various odd effects. One example that’s been known since the early days of filmmaking is that at certain speeds spoked wheels can appear to be rotating far more slowly than expected, or even to be rotating backwards.

Jurassic Park was made in the days when television sets and computer monitors used Cathode Ray Tube (CRT) technology. A CRT cannot display an entire frame at once, instead starting at the top left and drawing pixels line by line (“scan lines”) to the bottom. Just as the top line of pixels fades out, the new frame begins. At 50 or 60 frames a second we see only continuous moving images thanks to our persistence of vision; but a camera, usually running at 24 frames a second, will capture a dark line moving slowly down the screen and the images themselves will flicker. This was a common sight in TV news reports and sometimes in films of the time, when computer monitors were in the background. Here’s a shot from the 1995 film The Net where the new frames have been half-drawn:

View from above of computer expo. The two stacked monitors center right are not genlocked, showing crawl lines. The Net (1995)

One technique that avoids this is to film the computer interface in isolation and composite the graphics into the footage afterwards. This is very easy in the 21st century with all digital processing but Jurassic Park was made in the days of optical compositing, which is more expensive and limits the number of images that can be combined before losing picture quality.

So to shoot CRT monitors with their graphics live, the camera shutter opening must be synchronised to the start of each frame. In TV studios and film sets this is done with genlocking, connecting all the monitors and cameras via cables to a single electronic timing signal. This was apparently the technique used in Jurassic Park, with impressive results. In one control room scene the camera pans across at least eight different monitors, and none of them are flickering.

Real World 3D Filing Systems

by

0

It helps to ground our critique if we consider speculative interfaces in light of real-world interfaces that support similar goals, so let’s look at some.

The two dimensional desktop metaphor developed at Xerox PARC in the 1970s and still present on personal computers today was explicitly based on the real world of offices, with desktops, sheets of paper, folders, and even trashcans. What familiar three dimensional storage systems in the real world could we use as a basis for comparison and inspiration?

The desktop GUI. Photo credit: Xerox PARC

At the small scale are kitchens and garages, which have cupboards and shelves and wall hooks. Just as some computer desktops are tidy and others are not, some people will scatter implements and ingredients in a seemingly random fashion that only makes sense to them while others insist on everything being in the right place. At the larger scale are office buildings and warehouses, with aisles and floors and rooms.

These all “work” through the use of containers for storage and spatial memory. They help the user by grouping a very large set of findable things into a smaller number of containers, and keeping those containers in a consistent physical location. In the kitchen example, you don’t have to remember where every plate or utensil is. You know they are on the upper right shelf where the plates go, or in the second drawer down where the utensils go. There is still an organization task for the containers, but it’s a smaller problem. 

There’s a more exotic candidate though, the memory palace.

For those who haven’t encountered the concept before, it is a mental discipline that improves memory recall by associating particular memories with rooms or other spatial locations in an imaginary building. As well as the “3rd floor, south corridor, room 43” coordinates, each room or memory is also associated with a particular visual design element as an additional recall cue. So, for example, if you had to remember the first elements in the Periodic Table in order, you might imagine a tiny dirigible, filled with hydrogen, flying around the front door of your home. Open the door and behind it you see helium-filled balloons welcoming you home, etc.  This is an old technology, in the sense that it has been known for at least a couple of thousand years. 

Fun aside: Memory palaces have been portrayed in some contemporary TV shows, for example Sherlock and The Tunnel. The shot below is just one small location in the wonderfully detailed interior mental landscape used by a character in season three of Sherlock. (I would love to expand on this particular memory palace, but doing so would massively spoil the episode for anyone who hasn’t seen it.)

A screen shot from the Sherlock episode, showing stacked folders and a bust on a desk in a room crammed with materials.
No description because I don’t want to spoil it. Sherlock, series 3 episode 3, “His Last Vow” (2014).

In fiction set in the present day, memory palaces are only used by characters with exceptional mental abilities for, as author John Crowley explains in the fantasy novel Little, Big (William Morrow Paperbacks, 2016): “The whole process was immensely complicated and tedious and was for the most part rendered obsolete by the invention of the filing-cabinet.”

A computer-based, three-dimensional file browser and storage system could have all the strengths of the memory palace without the disadvantages. Like a memory palace it would have the advantage over real world buildings of being infinitely extensible, unlimited by gravity or other physical considerations, and requiring no actual physical effort or materials to create. Unlike a memory palace it would retain the useful real world characteristic that if you forgot where something was you could still find it by just searching every single location.

Tagged: architecture, brain, cognitive effort, disambiguation, immersion, mapping, memory work, mental models, secret, spatial memory, wayfinding

So let’s keep these models in mind—the kitchen, the garage, and the memory palace—as we look at our fictional 3D file browsing examples, starting in the next post with Jurassic Park.

Browsing Files in 3D

by

0

Be forewarned—massive spoilers ahead. (The graphic shows the Millennium Falcon sporting a massive spoiler.)

What’s this all about?

The origin story here is that I wanted to review Hackers, a film I enjoy and Chris describes as “awesome/ly bad”. However, Hackers isn’t science fiction. Well, I could argue that it is set in an alternate reality where computer hackers are all physically attractive with fashionable tastes in music and clothing, but that isn’t enough. The film was set firmly in the present day (of 1995) and while the possibilities of computer hacking may be exaggerated for dramatic purposes, all the computers themselves are quite conventional for the time. (And therefore appear quaint and outdated today.)

With the glorious exception of the three dimensional file storage system on the “Gibson” mainframe. This fantastic combination of hardware and software was clearly science fiction then, and remains so today. While one futuristic element is not enough to justify a full review of Hackers, it did start us thinking. The film Jurassic Park also has a 3D file system navigator, which wasn’t covered in depth by either the book or the online review. And when Chris reached out to the website readers, they provided more examples of 3D file systems being added to otherwise mundane computer systems.

So what we have here is a review of a particular interface trope rather than an entire film or TV show: the three dimensional file browsing and navigation interface.

Scope

This review is specifically limited to interfaces that are recognisably file systems, where people search for and manipulate individual documents or programs. Cyberspace, a 3D representation of the Internet or World Wide Web, is too broad a topic, and better covered in individual reviews such as those for Ghost in the Shell and Johnny Mnemonic.

I also originally intended to only include non-science fiction films and shows but Jurassic Park is an exception. Jurassic Park has been reviewed, both in the book and on the website, but the 3D file system was a comparatively minor element. It is included here as a well known example for comparison.

The SciFiInterfaces readership also provided examples of research papers for 3D file system browsing and navigation—rather more numerous than actual production systems, even today. These will inform the reviews but not be discussed individually.

Because we are reviewing a topic, not a particular film or TV show, the usual plot summaries will be shortened to just those aspects that involve the 3D file system. As a bonus, we can also compare and contrast the different interfaces and how they are used. The worlds of Ghost in the Shell and Johnny Mnemonic are so different that it would be unfair to judge individual interfaces against each other, but for this review we are considering 3D file systems that have been grafted onto otherwise contemporary computer systems, and used by unaugmented human beings to perform tasks familiar to most computer users.

Sources

Having decided on our topic and scope, the properties for review are three films and one episode of a TV show.

Jurassic Park, 1993

“I know this!” and Jurassic Park is so well known that I assume that you do too. We will look specifically at the 3D file system that is used by Lex in the control room to reactivate the park systems.

Disclosure, 1994

This film about corporate infighting includes a virtual reality system, complete with headset, glove, laser trackers, and walking surface, which is used solely to look for particular files.

Hackers, 1995

As mentioned in the introduction this film revolves around the hacking of a Gibson mainframe, which has a file system that is both physically three dimensional and represented on computer screens as a 3D browser.

A bar chart. The x-axis is every year between and including 1902 to 2022. The y-axis, somewhat humorously, shows 2-place decimal values up to 1. Three bars at 1.00 appear at 1993, 1994, and 1995. One also appears in 2016, but has an arrow pointing back to the prior three with a label, “(But really, this one is referencing those.)”

All three of these films date from the 1990s, which seems to have been the high point for 3D file systems, both fictional and in real world research.

Community, season 6 episode 2, “Lawnmower Maintenance and Postnatal Care” (2016)

In this 21st century example, the Dean of a community college buys an elaborate virtual reality system. He spends some of his time within VR looking for, and then deleting, a particular file. 

Clockwise from top left: Jurassic Park (1993), Disclosure (1994), Hackers (1995), Community (2016)

And one that almost made it

File browsing in two dimensions is so well established in general-purpose computer interfaces that the metaphor can be used in other contexts. In the first Iron Man film, at around 52 minutes, Tony Stark is designing his new suit with an advanced 3D CAD system that uses volumetric projection and full body gesture recognition and tracking. When Tony wants to delete a part (the head) from the design, he picks it up and throws it into a trashcan.

Tony deletes a component from the design by dropping it into a trashcan. Iron Man (2008)

I’m familiar with a number of 2D and 3D design and drawing applications and in all of them a deleted part quietly vanishes. There’s no more need for visual effects than when we press the delete key while typing.

In the film, though, it is not Tony who needs to know that the part has been deleted, but the audience. We’ve already seen the design rendering moved from one computer to another with an arm swing, so if the head disappeared in response to a gesture, that could have been interpreted as it being emailed or otherwise sent somewhere else. The trashcan image and action makes it clear to the audience what is happening.

So, that’s the set of examples we’ll be using across this series of posts. But before we get into the fiction, in the next post we need to talk about how this same thing is handled in the real world.