Another excerpt from Breivik’s dairy, covering the preliminary phases, backdated to 2002:

Personal reflections and experiences during several preparation phases April/May 2002

I am the Norwegian delegate to the founding meeting in London, England and ordinated as the 8th Justiciar Knight for the PCCTS, Knights Templar Europe. I joined the session after visiting one of the initial facilitators, a Serbian Crusader Commander and war hero, in Monrovia, Liberia. Certain long term tasks are delegated and I am one of two who are asked to create a compendium based on the information I have acquired from the other founders during our sessions. Our primary objective is to develop PCCTS, Knights Templar into becoming the foremost conservative revolutionary movement in Western Europe the next few decades. This in relation to developing a new type of European nationalism referred to as Crusader Nationalism. This new political denomination of nationalism will become the foremost counterweight to National Socialism and other cultural conservative political denominations, on the cultural right wing. Everyone is using code names; mine is Sigurd (the Crusader) while my assigned mentor is referred to as Richard (the Lionhearted). I believe I’m the youngest one here.

I am going to discontinue my involvement in the Norwegian Progress Party as I have lost faith in the democratic struggle to save Europe from Islamification. After 65 years of harsh political oppression, demonization and ridicule from the communist-globalist cultural establishment, directed at any and all who opposes multiculturalism, there are still no indications that this communist-globalist hegemony will ever allow PP to take control. My party is systematically vilified and sabotaged by a united media before every single election. And even if they ever did manage to form a majority government with Høyre (the Conservative Party) their principles and party program would not be conservative enough to halt the ongoing Islamic demographic warfare OR increase the ethnic Norwegian fertility rate from 1.4 to 2.1. The only thing PP has achieved so far is to give false hope to Norwegians. They say that democratic struggle is the only solution, when it is clearly already lost. How can we democratically compete with a regime that is mass-importing hundreds of thousands of new voters? The PP is pacifying Norwegians by giving them false hope and I refuse to continue to have any involvement in this. Armed struggle appears futile at this point but it is the only way forward.

2002-2006
I am required to build a capital base in order to fund the creation of the compendium. I don’t know if I will ever proceed with a martyrdom operation at this point as it simply seems too radical.

My plan A is to attempt to acquire 3 million Euro, in which case I plan to establish a pan- European organizational platform that will attempt to grow organically as a support organization which will distribute a “legal version” of the compendium.

If I fail to generate the specified amount I will move forward with the operation, in order to market the compendium that way.

As of 2005 I have managed to generate 500,000 Euro, but I am still 2.5 million Euro short. I will attempt to generate the remaining amount through continued stock/options speculation. I can afford to lose up to 250,000 Euro without it compromising the completion of the compendium and the subsequent effectuation of the operation.

Stock/option speculation did not work out. I will need to cut my losses and proceed to plan B.

After cutting my losses, I now have a minimum of funds to complete my two tasks (in excess of 250,000 Euro).

2006-2008
Researching and writing the compendium: “A European Declaration of Independence”

Autumn – 2008
I attended a birthday party in Oscarsgate, Oslo. We were attending a birthday party organized by a good friend of Axels’ girlfriend, Synne. I noticed the woman who celebrated her birthday was working as a judge. A majority of the people at the party where jurists – judges and lawyers in the public sector. I chatted with most of the people at the party. It really struck me how incredibly politically correct everyone were, as if they were all members of the Norwegian Labour Party. I have never before experienced a group of people who are completely freaked out about discussing political issues relating to multiculturalism and Islamization. I noticed a majority of these people were Labour Party sympathizers. I guess they don’t really have a choice considering the fact that they are all climbing the public sector hierarchy. A thought occurred. The judges during WW2 who had party affiliations with the NS or any affiliation with the SS were prosecuted and imprisoned. Is it therefore only fair that judges of high rank with party affiliations to the Labour Party and the other parties who support multiculturalism (and therefore Islamization) are to be considered category B or C traitors? They obviously have a considerable responsibility and should be considered traitors of their people. I would imagine most of them would be considered category C though as their influence is considerably less prevalent than that of any parliamentarian, editor/journalist or university professor/lecturer. In any case, nice people though and we had a good time. If only they had any idea that one of their guests was a Justiciar Knight of an organization affiliated with the Norwegian and European Resistance Movement, I would be thrown out immediately most likely. It is completely understandable as their careers would be over if they had any affiliation with such organizations or individuals.

Autumn – 2009 – Birthday party
My best friend, Peters, 30th birthday. We are going to Budapest to party hard for 5 days. This is my second trip to Hungary. I really love that country and the people. Clubs in Buda are top notch. Excellent elektronica scene, among the best in the world. Hungarian girls are hot as hell, too bad I have to avoid relationships for the good of my mission. Doesn’t hurt having fun though 😀 I don’t think I’ve consumed this much alcohol for many years, totally awesome. My best friends, Martin, Axel, Marius and Peter went down and hooked up with another band of Norwegians we have known for some years. One of Martins best friends are Jon-Niclas, really cool guy. He’s a rather well known Norwegian comedian, together with his partner and friend Anders, and a few others. We had a lot of fun down there, the ten of us. Most of us know each other from Nissen High School in Oslo.

Autumn – 2009 – Phase shift
I’m in a phase shift with my project. The compendium is complete and I currently preparing for the next phase. I’m creating two different and “professional looking” prospectuses for “business ventures”. A mining company and a small farm operation. The reasoning for this decision is to create a credible cover in case I am arrested in regards to the purchase and smuggling of explosives or components to explosives – fertilizer. In this regard I created a new company called Geofarm, which might act as a credible cover for such activities. I spent about 2 weeks cannibalizing an existing Mining prospectus. In addition to the prospectus I have created I will create two websites and business cards. I also intend to contact suppliers of equipment related to these industries so that they may act as future witnesses, collaborating my story, should I ever need it. If I do get arrested in this “acquirement phase” I figure that they will have a hard time proving that my intention is to contribute and fight in the ongoing European civil war. Sure, they will attempt to charge me with terror but they will not have enough evidence to incarcerate me (due to my covers). Also considering the fact that I have never done anything illegal in the past. If I do get caught I will, however, be placed on every imaginable watch list for the rest of my life and will thus be unable to partake in any advance operation. In this case I will have to cancel the primary operation and instead go with my secondary operation of lesser significance. Such is the life of a resistance fighter.

November – 2009
I’ve spent a few weeks contributing to set up a cultural conservative newspaper with national distribution in Norway. The idea is to develop Document.no, a cultural conservative blog into a newspaper company with 12 publications per year. I’ve developed a relatively complex strategy and forwarded it to Hans, the editor and manager. I have made a few attempts to seek funding although my efforts haven’t materialized yet. I tried to formalize cooperation between the Progress Party and Document (both moderate cultural conservative entities), at least in an incubation period. However, after discussing this with both FrP and Hans it would appear as they do not want to take part in any form of cooperation with each other. I have spent approximately 50 hours developing potential strategies for Document.no, pro bono, but I will have to limit any further involvement due to my primary operation. Hans Rustad, the leader of Document.no, seems like an odd fellow. I’m usually excellent in psycho analyzing people but I haven’t figured him out at all. I know he has a Marxist background and I believe he is in fact something of a rarity – an actual national Bolshevik, and thus not a real nationalist. He likes to criticize the multiculturalist media hegemony in Norway but is completely unwilling to contribute to create any form of political platform or consolidation. He seems extremely paranoid and suspect of most people and he likes to attempt to ridicule and mock Fjordman, every time he writes a comment. Document.no has developed into a kind of moderate cultural conservative think tank where moderate cultural conservatives exchange thoughts and make comments on the articles posted. Hans likes to criticise cultural Marxist media (MSM) but is unwilling to present any solutions or to contribute to any form of consolidation of an “alternative”. Despite of that, I don’t mind contributing somewhat as it benefits our cause, regardless.

December – 2009
I’ve now worked with email farming for two months. God, I wouldn’t have imagined it was going to be this f…… boring 😀 I’m using Facebook to target various nationalist related groups and inviting every single member. I’ve managed to farm approximately 1,700 email addresses this way. I did generic swipes of various blogs and internet sites earlier this year as well. Total number of email addresses is approx 3,000-5,000, haven’t made an exact count yet <3 Ofc, it’s a quite tedious task due to the fact that Facebook has a 50 invitations cap per day. Even with my two accounts I’m limited to inviting a maximum of 100 per day, where an average of 40-50% accepts. Of these 40-50% around 90% have email addresses whereas approx only 50% are checked on a regular basis. So of 1,000 Facebook friends I will achieve a penetration rate of around 20-30%. Not optimal but then again, I can’t think of a more efficient way to get in direct touch with nationalists in all European countries. Christmas – 2009
Have been in a few Christmas parties with friends, fun although I’ve gained some extra kilos 😀 I’m currently 7 kg overweight up 3-4 kilos the last three months. I started the hardcore training program a few months ago but chose to end it in order to complete the book and email farming process. At this point I’ve extended the writing phase 4 times due to the urge to extend certain chapters. These delays are starting to severely affect my budget leaving me with less than 42k Euro in direct funds and another 25k in credit. I really need to finalize this compendium soon and move on to next phase (research into weaponry, armor and explosives followed by acquirement phase). Will have to destroy my old hard drives and buy new ones before the research phase, and then destroy these ones again before acquirement phase. It takes ages to farm quality email addresses from Facebook.

Anyways, moral is on an all time high but physically I’m at an all time low. I really need to start my training program soon… but still aprox 1-2 months before my time budget allows me to focus on this. Btw, I just read that an alleged Swedish neo-Nazi group, who allegedly planned to assassinate Swedish category A and B traitors, had been uncovered in connection with the theft of the “Arbeit macht Frei sign”. Hmm, I always wondered if these guys are actually National Socialists or if it’s just typical cultural Marxist propaganda. Perhaps it’s my fellow co-founder of PCCTS, my sister-cell??? I guess I won’t find out unless they publish the names. I doubt it though. They seem to be using the outdated, traditional and vulnerable hierarchical military cell-model which indicates that they are from an old school and un-related resistance fraction.

January 2010
I was out with Peter and Didrik today. We had some drinks at Peter’s bachelor pad near Bogstadveien, probably the most prestigious place to live for bachelors in Oslo and not far from where I used to live when I was still in the “game”. We then went on to a nearby restaurant, had an incredible meal, drank some more and met Peter’s girlfriend and her friends. We had a few beers and talked, very cosy <3 I remember telling Christine about my career as a writer, telling her that I wasn’t planning on actually selling the book but rather to distribute it freely in order to more efficiently propagate our cause to a broader audience (they were all cultural conservative btw). Christine told me that she believed I was driven by idealism, which is of course true, but that I actually lived my dream. While I didn’t want to start to argue that particular factor, as I don’t like appearing like a pooper or to risk blowing my cover, it got me thinking. Are, we, the reactionary revolutionary conservatives really living our dream or are we making a sacrifice? To be honest, if I felt that other people could do my job I would not do what I do, that I can guarantee you. I don’t want to do what I do, I would rather focus on starting a family and focus on my career again. But I can’t do that as long as I feel like a person caught in a burning spaceship with nowhere to go. If you see the ship is burning you don’t ignore it and start cooking noodles do you? You put out the fire even if it endangers your life. You don’t enjoy putting out the fire but it is your duty to yourself and your fellow crewmen. And let’s say your crewmen have been infected with a rare virus that shuts down their rational senses and they try to stop you from putting out the fire. You can’t really allow yourself to be stopped by any of them as it will lead to your collective death. You will do anything to put out that fire despite of the fact that they are trying to stop you. Anything else would be illogical. But sacrificing yourself for others who probably detest you for it doesn’t necessarily have to be a miserable experience. After all, we have the truth and logic on our side and we will learn to find rewards and comfort in our actions. After all, sometimes being uncompassionate is the most compassionate thing you can do. Anyway, back to email farming on Facebook, aaaaarrrrggh :/ It’s driving me nuts, lol. I’m currently working on French leads/FB groups. An extremely tedious and boring task – preparing quality contacts from scouring patriotic Facebook groups and sending out 100 select invitations per day (from 2 FB accounts). I’ve been doing this for 60 days straight now, 3-4 hours per day. FB networking isn’t all that bad though as you do meet a lot of interesting, like minded people. This is the main reason why my book has been delayed. I just feel that I must send my book to at least 10 000 primary nationalists in the European world and I’m currently at 6000 email addresses. Good vocal trance music makes this task a lot less boring ;). My funds are depleting gradually though; currently at 50,000 Euro + 30,000 Euro in credit limits (12 credit cards ftw), which will force me into the next phase of the operation soon. A usual day for me involves email farming, writing, sharing “moderate” resources from my book on debate groups to coach fellow cultural conservatives, smoking, eating chocolate lol, taking a daily 1 hour walk/motivational meditation and doing some occasional battlegrounds in WoW on my badass Horde resto druid. I just completed Dragon Age Origins not long ago. A brilliant game! 😀 It’s important to have fun a few hours every day. I regret to admit that I’ve become a notorious downloader of pirated movies, series and games etc. but have noticed that an increasing number of sites have been closed down lately. Stealing is bad, I admit, but then again, when you have devoted your entire life to a good cause you can allow yourself some naughtiness especially if it can contribute to conserve your funds, cough ;). Yes, yes, no one's perfect 😛 February 2010
I just bought Modern Warfare 2, the game. It is probably the best military simulator out there and it’s one of the hottest games this year. I played MW1 as well but I didn’t really like it as I’m generally more the fantasy RPG kind of person – Dragon Age Origins etc .and not so much into first person shooters. I see MW2 more as a part of my training-simulation than anything else. I’ve still learned to love it though and especially the multiplayer part is amazing. You can more or less completely simulate actual operations.

I’ve continued with email farming until now, on a daily basis. The email farming phase is coming towards its end and I will conclude it by at least attempting to acquire as many email addresses to members of parliament in Western European countries as possible. Because I think focusing solely on distributing the compendium to patriots would be a mistake as they have little to no political influence in the EUSSR/USASSR hegemony. It is important that our enemies know “how we see what they are doing”. The national intelligence agencies of Europe will do everything they can to limit its distribution. They will not allow the parliament members of any nation to read it, so we must send it directly to them.

It’s a shame I have to purge my 5,000 Facebook contacts. It took so much time and work to acquire all those contacts and I get the feeling I’m purging a little piece of my life, lol. But I did get what I came for after all; every individuals email address.

It is still too snowy and cold to initiate the acquirement phase (acquirement of weaponry and armor etc). My agenda the following months looks like the following:

1.
Conclude email farming

2.
Conclude the writing of 2083 and secure it. This post will be one of my last entries. I will have to secure the compendium at a safe location until the week before operation (today is Feb 7th btw).

3.
Change hard drives (phase shift), purge all evidence from other phase.

4.
Initiate the research phase: research the possibilities for the acquirement of weaponry and armor, the making of WMDs (explosives), acquirement of components of WMD, research of logistics and storage opportunities.

I have budgeted 2 weeks for the research phase, but it might take up to 6 weeks.

The research phase will be followed by the acquirement phase where I have budgeted 4-8 months. The acquirement phase will be followed by a one week only construction/preparation phase.

Btw, I just received what looks like a mass recruitment message from one of my 5000 Facebook contacts (he’s wearing a balaclava in his pic btw with a t-shirt with the SS skull insignia). The message goes like this:

Hails!

“help support are worldwide organization ATB Aryan Terror Brigade a branch Of blood and honour, if you are interested reply…..”

While I have to admire the young lad’s initiative and probably noble intention (he probably doesn’t have the faintest clue what National Socialism or constructive and meaningful resistance is) the lack of subtlety and discretion is unfortunately the current trademark of many European amateurish resistance groups. They probably want recruits in their Jew/immigrant bashing efforts… Many of these people are causing so much damage to the nationalist cause that I sometimes wonder if they are on the payroll of the cultural Marxists. Regardless, my hope is that this compendium will contribute to a significant “leap in evolution” of the current climate of cluelessness and incompetence.

March 2010
I have ended my “email acquisition phase” ending up with a grand total of 5,700 Facebook contacts (2 accounts) and a total of 8,000 high quality email addresses (representing all spheres of cultural conservative thought). I now have a direct way forwarding my compendium to a good portion of the most dedicated nationalist oriented individuals in all Western European countries, including the US, Australia, Canada, South Africa, certain Eastern European countries, Armenia, Israel and even India. This task has taken me several months and it pained me to purge all my FB contacts. I’ve talked and discussed with hundreds of patriotic individuals (many whom are nationalist oriented intellectuals fighting the good fight), many good people, which made the decision to purge the contacts even harder. I have now moderated by FB profile considerably and transformed it to a politically correct profile. I do fear sometimes that my endeavors relating to the research of the book, and acquisitions of these addresses has resulted in me being put on various watch lists. I know that at least a few of the profiles I invited are fake, and used for information gathering for various European and US intelligence agencies. The question is; have they flagged me? I guess I will find out eventually…

I went ahead and sold some of the last sets of items I possessed, from my former life, which had value. It was a complete 40 piece Versace-Rosenthal dinner set worth approximately 5,000 Euros. I bought it a few years ago for 2,000 Euros and just sold it for that price. I know I should sell my Breitling Crosswind (new price: 7,000 Euros), but sentimental value has thus far prevented me from doing that. Actually, I still have a corporate HP printer (new price 4,000 Euro). I may attempt to sell that later as it’s pointless for me to own one. I do have a quite large booze and wine collection which I have collected over the years. Several of the red wine flasks are from 1979, and therefore possibly worth a fortune. I do appreciate a glass of vintage red wine so I may actually drink it, prior to execution of operation. I have given away a few of my paintings to friends. I will keep the rest hanging, as I still appreciate the works.

The compendium is in its last phase. I have worked quite hard the last two months to complete it. I estimate that I will be able to complete it within 2 weeks.

Time is of the essence, and I really need to start the research phase (for the actual operation) and begin on the physical transformation phase. I have to wait until I have secured the compendium at multiple locations and purged and destroyed my hard drives.

Moral is peaking. I can’t wait to share the compendium with fellow brothers and sisters. This will be one of the last entries btw. I may or may not add more to this log prior to execution of operation.

July 2010
I recently successfully finished the “armor acquisition phase” and have created an armor cache by secured a full Pelican case underground. I basically dug it down somewhere deep in the Norwegian forest. It was my first experience with this type of assignment and I underestimated the planning needed to complete the job. A few days ago, I got up at 5.00 in the morning and spent a couple of hours packing for the trip. By using Google Earth I had selected a desolate location (approx), deep in the forests of Norway. I did not yet know the exact location when I set out on the trip, loaded with my cargo. The Pelican case contained a complete set of Lokis armor – shield included, caltrops, police insignias and various other equipment needed for the operation. I was unable to place the Damascus FX- 1 Flexforce riot suit and the Molle, pouch carrier in the Pelican case so I stashed it on the attic marking it as “air soft equipment”. That will have to do… The Pelican case was so full I had to physically sit on it to be able to lock it properly.

Anyway, after about a 3-4 hour drive I arrived at the area and I started to scout for small roads of the highway, as a car parked by the highway would cause unwanted attention. I found one potential location and drove my little Hyundai weenie car down a dirt road. These cheap urban cars are obviously not for off road use so I almost ended in the ditch. I parked the car and scouted the area on foot for an hour but with little success. An appropriate location involves finding an area with soil that you can actually dig in so it excludes areas close to rocks or near trees (all the roots will make it too hard to dig). I drove for half an hour and started scouting another location. I found what I thought could be an appropriate dig site and fetched the shovel and two big plastic covers for initial testing of the soil. I could tell by the topography that not many people had been here before. The forest was very compact with a lot of spider webs, and hundreds of flying bugs around. I have serious issues with spiders so I just had to block those thoughts out. Of course, it was a giant rock just 10 cm below the soil of my first attempt… Regardless, I continued digging close by and eventually found a suitable spot. When in the “identification process” you should expect a few unsuccessful attempts. You should at least dig 1.5-2 meters vertically and you obviously need a little bit of luck. I was considering getting an echo sensor gadget for this purpose, which can reveal whether there are obstructions below the ground etc. However, getting one would be a hassle, so I just decided to do it the old fashion way.

I started digging at 11:00 and continued for three hours straight. There were a lot of mosquitoes annoying the hell out of me despite of the fact that I was covered in anti-mosquito oil. Why oh why didn’t I bring a mosquito head-net… Due to the intensity of constantly digging, the heat and sweat forced me to remove everything except my boots and my Skins compression gear. The bugs had a field day for sure… Digging for hours is exhausting but I continued pushing my tolerance level as I really wanted to finish before dark. At around 16:00 I was out of water, I had emptied by 1.5 litre Camelbak pouch. I had been digging continuously for 5 hours and was completely exhausted, yet I hadn’t even finished digging the hole… I was getting increasingly frustrated as I couldn’t go on much longer without water. As I didn’t want another day of this hell (4-6 hours driving total + digging) I made the best out of the situation and went to prepare the cargo in my car for transportation to the dig site. I had originally planned to split the content of the case into four and carry it in my backpack to the site. The case was too heavy to transport in one go without problems. Unfortunately, with my water issue I really had no choice. I literally dragged the 70 kg case to the dig site. It was extremely exhaustive but it saved me approximately 30-60 minutes. At 18:00 I had secured the case underground and filled in all the dirt. I then spent around 40 minutes concealing the dig site by transporting branches and leaves from other parts of the forest. After one and a half hours drive I finally reached a gas station. I was quite dehydrated at the time. Needless to say; that was the best coke and hotdog I had consumed in ages…

I realize that I rushed the end process due to the fact that I had underestimated several aspects of “dig site management”. I will not make the same mistake when I’m securing my weapons after the “weapons acquirement phase”. Lesson learned.

August 2010, 1
Phase shift – armor phase to weapons phase; hard drive replaced with new one, and all evidence from former phase purged. I’m preparing for a car trip to Prague to establish a weapons connection for the acquisition of an assault rifle, a Glock, splint grenades and AP ammo (grenades and AP ammo is a bonus). Prague is known for being maybe the most important transit point for illicit drugs and weapons in Europe. I spent a couple of days planning the trip as it takes around 15-17 hours to drive and it involves the car ferry from Sweden to Denmark and another ferry from Denmark to Germany. I might just take a car ferry from Oslo to Germany. It will be hard to avoid using my visa during this trip but I will try. My mobile will be turned off during the entire duration and will only be turned on in an emergency. I have researched all relevant information; hostel info for Copenhagen, Berlin and Prague. If I fail to accomplish my objective in Prague my secondary attempt will be in Berlin. If that fails as well I will drive all the way to Serbia. My encounter with the criminal networks in Prague will not go without risk. I will have to try to establish a connection via Taxi drivers, and/or through the clubbing/prostitution scene. I just hope I make it out alive… I will at least avoid all ferries and electronic payments on the return trip and cross the northern border (it has minimal presence of custom officers), just in case I am somehow under surveillance. Better to be safe than sorry etc. When I return and secure the weapons I can finally initiate the “explosive phase”. More on that in another chapter.

August 2010, 2
As the “armor acquirement phase” has been successfully completed it is now time to move on to the “weapons research phase” followed by the “weapons acquirement phase”. I’m planning a road trip to Denmark and Germany as backup targets and Czech Republic as the primary destination with the intention of buying an AK-47 (7.62) and a Glock 17 or 19 (9 mm).I’ve spent the last two to three weeks researching clubs or similar places where medium-scale drug dealers frequent. Drug dealers are the best bet when looking to establish a weapons connection, after all. They, or their suppliers, have functional smuggler routes from other East bloc countries, the Balkans and from Turkey. While they prefer to trade drugs, due to the space efficient nature of narcotics, they are usually able to provide weapons as well. If they don’t have any weapons in stock, they are usually able to order arms from their couriers.

I can’t say I’m looking forward to this trip. I’ve heard that Prague is the most dangerous capital in Europe with a lot of very brutal and cynical criminals. There is a chance ill get killed down there by some desperate criminal individual. In any case; I’ve prepped by car, hollowed out the back seats of my Hyundai Atos and it should be room for weapons, a few frag grenades and AP ammo. The car is really crap so I hope it won’t break down in the middle of the autobahn. Several people on the Hyundai forum said I would never reach my destination and back in that car, lol. I guess we will see… The reason I chose it in the first place is that it looks like a pensioners car, so it not likely that I will be stopped in customs controls when I smuggle the arms back to Oslo.

Today is the day; I’m driving down to the ferry now. It will take me from Oslo to Kiel, whereas I need to drive approx 9 hours straight to Prague where I have booked a 6 day stay at a relatively cheap hostel. I have usually gone with hotels in the past but they are not great for socializing. Nothing beats a Hostel when it comes to partying and getting to know people etc. This trip is going to be a fascinating experience. I’m just trying not to think too much about what might happen when I approach drug dealers. I’ve decided I want to get most out of the trip so I have made a schedule including visits to all of Prague’s tourist attractions. I will do this during the day time, and go clubbing at night looking for a connection.

I’m been two days in Prague. I’ve sorted a few tasks I wanted to do. One involved professionally printing prospectuses which will serve to strengthen my cover stories in case I get apprehended pre-operation. The prospectus is basically a Mineral Extraction business plan explaining in detail why I would need to create explosives. The cover story involves the manufacturing of explosives without a permit. Everything is specified in the prospectus which should be enough to create a reasonable doubt regarding any potential terror charges, should I ever get caught. I also got several police ID badges and other related insignias professionally printed, paying cash of course. Printing these back in Norway would only result in the clerk notifying the authorities.

So only one thing remains; I need to find my weapons connection within 4 days…! I failed miserably yesterday; I went to two brothels and a couple of clubs. The people I approached got really nervous and thought I was either a cop or completely nuts, lol. I have had to refine my approach pitch. It started off really bad. Whatever you do when trying to establish a gun connection, never be too direct;

Hello there; I want to buy an AK-47, 4 frag grenades, 1 Glock and AP bullets. (Guy will run for the hills before you have completed the last sentence 🙂

This city doesn’t seem dangerous at all btw. I have no idea why that BBC documentary would present such incorrect information. In fact, I feel even safer here than back in Oslo. Probably because there is basically no Muslims living in this country. Most of the criminals here are Christian Gypsies and I have found out that most of them have been basically chased away from the capital, Prague, to other Czech cities. I can understand why the government would want to do this. Prague is like a giant Museum of ancient European historical sites and attracts millions of tourists annually. All the criminals that was here a few years ago was bad for business. I have never seen this many tourists in any other European city; Paris, London and Berlin included. Downtown Prague is packed with thousands and thousands of tourists, even now in September.

Day 5 in Prague. I’m getting desperate. This is the first major setback for me during my operation. I am so disappointed by myself. I realize now that Prague is far from the ideal city when looking to buy arms. Western European capitals are probably a more suitable location to establish a connection as that is the end destination of the arms that come through here. Prague may be a transit point but finding the actual couriers or sellers has proven to be a hard task. Also, I guess I wasn’t motivated enough, considering the fact that I could have just purchased a legal semi automatic rifle and a Glock in Norway. I have approached several shady looking individuals but I would have tried a lot harder if it weren’t for the fact that I could buy guns legally.

I have now decided to abort this sub-mission and rather focus on acquiring the weapons I need legally, back in Norway. Regardless of the outcome of this mission; I have had a great vacation and have experienced most of the historical sites and a lot of amazing architecture. I’ve also partied a lot with the people I met at the hostel. Time to go home…

The trip back was a bore. My Ipod batteries died halfway to Copenhagen. I stayed the night at a hostel and drove from Copenhagen to Oslo the next day.

September 2010
I originally wanted to try establishing a connection with Hells Angels in either Prague, Berlin or Copenhagen. However, I lost my motivation completely during my first few days in Prague. I now have to acquire a semi-automatic rifle and Glock legally. I don’t think the rifle will be a problem, as I have completed the 1 week duration hunter course, and I have had a Benelli Nova Pump-Action shot gun for 7 years without incident. I don’t have a criminal record so there is no reason why the police should reject my application.

I have now sent an application for a Ruger Mini 14 semi-automatic rifle (5.56). It is the most “army like” rifle allowed in Norway, although it is considered a “poor man’s” AR-15. I envy our European American brothers as the gun laws in Europe sucks ass in comparison. However, the EUSSR borders to Turkey and the Middle East so acquiring illegal arms isn’t exactly rocket science providing you are motivated enough. In any case; I would rather have preferred a Ruger Mini 30, but I already own a 7.62 bolt rifle and it is likely that the police wouldn’t grant me a similar caliber. On the application form I stated: “hunting deer”. It would have been tempting to just write the truth; “executing category A and B cultural Marxists/multiculturalist traitors” just to see their reaction 😛

Acquiring a pistol, legally, is more tricky. I have been a member of Oslo Pistol Club for a few years but it is required that you train regularly in order to be eligible. I will have to train more often this winter and ensure I build up a solid track record, which in turn should enable me to get a permit.
I have now changed my hard drive, again, and I’m now going to start the “explosives research phase”. I’ve been looking forward to this phase for a long time.

October-November 2010
I have just completed the “explosives research phase” and have summarized several new chapters for the compendium. My rifle application came through and I have now ordered a 800 Euro silencer specifically created for automatic and semi-automatic rifles. The Ruger Mini 14 costs about 1,400 Euro including a customized trigger job from the gun smith. I will have to buy a new stock with picatinny rails (400 Euro) and 30 bullet factory mags (60 Euro per mag) from a US supplier.

I have now cleared out all of the information (evidence) from the previous phase and changed my hard drive once again. I am now ready to start the chemical acquirement phase…! 🙂

I was at a party yesterday with a few friends from high school. One of them, Trond, who apparently had evolved into a relatively extreme Marxist, often joining ANTIFA (Blitz) demonstrations… We were both into hip hop back then and he had apparently continued down that road. We had some interesting debates that night while drinking… 🙂 Can you believe the hypocrisy of some people? The guy lives in a Norwegian only area in the middle of a Muslim ghetto at Tøyen in Oslo. I asked him; don’t you consider yourself to be a hypocrite considering the fact that you support mass Muslims immigration and at the same time refuse to actually live with them, and instead barricade yourself in a safe Norwegian area? Needless to say, he didn’t have a good answer… I went on about the fact that there is no such thing as a Palestinian. The concept known as Palestine and Palestinians is a Syrian effort to justify Jihad etc (this is a classic and awesome way to infuriate Marxists :-). We managed to push his buttons over and over again without him realizing that we were using him as a supplier for top notch entertainment :-). God, that was actually quite mean but I honestly think he will re-evaluate his Marxist world view after that night.

I’ve now ordered 50 ml, 99% pure liquid nicotine from a Chinese online supplier. 3-4 drops will be injected in hollow point rifle bullets, which will effectively turn it into a lethal chemical weapon. However, I am quite worried about any potential customs related issue as pure nicotine is considered an illegal substance. In a worst case scenario; a customs official will open the package, get a few drops on his skin and die, and I will have a full SWAT team serving me cock sandwiches at my door the next morning… However, I specifically instructed the Chinese supplier to send the package by courier to my company name, with extra wrapping and chemical labeling.

I have now made my first order for one of the chemicals required for my initiator from an online-based Polish supplier. I will have to order another 4-5 different ingredients online before I am done.

Needless to say; this is an extremely vulnerable phase. In fact, it is the most vulnerable phase of them all. If I get through this phase without trouble I will be very close to finalizing my operation. I am somewhat concerned but I have credible cover stories for each individual chemical (with the exception of one) should there be any complication.

It has been decided that the operation will be effectuated in Autumn, 2011. However, I cannot go into factors concerning why, at this point. My current funds are running low, and I have less than 15,000 Euro left with a 30,000 credit backup from my 10 different credit cards. My primary funds should cover all planned expenses without spending any of the credit.

So what do I do when I’m not working? I’m in the middle of another steroid cycle at the moment, training hard to exceed my 92 kg record from July. I’m currently at 90 kg and hope to reach at least 95 kg. Perhaps ill even reach 100 kg before I end the cycle in 4 week’s time! 🙂 I have a more or less perfect body at the moment and I’m as happy as I have ever been. My morale is at an all time high and I’m generally happy with how things are progressing. I may create an ideological Knights Templar Youtube movie this winter. I have some time to invest while I wait for my chemicals to arrive. My sister in Los Angeles invited me to spend Christmas with her, Kevin and my niece Kaia and nephew Tyler. I’m tempted to visit her for the fourth time but I don’t know if my budget will allow it. My sister supports the fundamental principles of the cause but she couldn’t care less about the struggle and politics in general. They are both career cynicisms and only really care about feeding their own egos. I understand that mentality though as I’ve been there myself. Still, such apathy is the root cause of both US and especially Western Europe’s problems.

I’ve been partying occasionally with my friends; Marius, Axel, Peter and a few others, since I came back from Prague. The cover story I used as justification towards everyone I know was that I was promoting my book.

I am happy to see that Axel is finally coming to his senses regarding his views on the Islamization of Europe. And I expect him to use his vote on the only anti-multiculturalist party during the election in a year’s time.

I am currently watching Dexter, the series about that forensic mass murderer. Quite hilarious. I’m also looking forward to watch the new movie-series about Carlos the Jackal (the Marxist-Islamist and Che wannabe scumbag). Hopefully, it will be as good as the Baader Meinhof Complex. I really enjoyed that one. Oh, and I’m also playing Fallout 3 – New Vegas atm after just finishing Bioshock 2. I’m also going to try the new World of Warcraft – Cataclysm when it is released in December. Time to dust off my image…

As for girlfriends; I do get the occasional lead, or the occasional girl making a move, especially now a day as I’m fit like hell and feel great. But I’m trying to avoid relationships as it would only complicate my plans and it may jeopardize my operation. And I don’t feel comfortable manipulating girls any more into one night stands. I am not that person any more. I did screw two girls in Prague though, but that was mainly because it was a realistic chance that I would end up dead during the process of establishing a weapons connection. I won’t make any effort to try to completely justify it though. Human males are imperfect by default as they are plagued by their biological needs. Nevertheless, screwing around outside of marriage is after all a relatively small sin compared to the huge amounts of grace I am about to generate with my martyrdom operation. And it is essential that you do what is required to keep moral and motivation at a high level; especially, just prior to operation critical moments. I have reserved 2000 Euro from my operations budget which I intend to spend on a high quality model escort girl 1 week prior to execution of the mission. I will probably arrange that just before or after I attend my final martyrs mass in Frogner Church. It will contribute to ease my mind as I imagine I will get tense and very nervous. It is easier to face death if you know you are biologically, mentally and spiritually at ease.

I received the 50 ml of 99% pure liquid nicotine shipment from China today. I’m relieved to see that there were no complications whatsoever.

I thought I’d add a little comment about general expenditure during the pre-operational phases. It is essential to maintain a low budget to conserve your limited budget. The importance of this cannot be stressed enough as having sufficient funds for the operation is everything! Approximately 4 years ago, in 2006, just before I started writing this compendium, I decided to move from my apartment in Frogner, one of the most priciest areas in Oslo, home to my mother. She accepted as she knew I would have to conserve my funds while I was writing the compendium. The cost of renting my old apartment was 1,250 Euro. My current accommodation expenditure (food included) is 450 Euro, a sum I transfer to my mother monthly for renting a room and for food. This wouldn’t have worked in my old life, when I was an egotistical career cynic as it would devastate my social image. However, individuals who choose to become a Justiciar Knight cares little about image (the pursuit to project a desirable façade to impress friends and potential mating partners). Sure, some people will think you are a freak for living with your parents at the age of 31 but this is irrelevant for a Justiciar Knight. The only thing that matters is to ensure that you have enough funds and free time to complete the objectives necessary to execute your individual mission. As for keeping secrecy while living with another person; sure, you need many cover stories and you need access to the loft and/or basement storage areas. As long as you ensure that there is no possibility that the person you are living with will find out what you are really working on, living with others shouldn’t pose a big problem until you initiate your manufacturing phase. My armor is dug down in the wilderness somewhere and I will soon dig down another pelican crate with my weapons, once I get them. I have a large Pelican chest in my room where I have secured items that might raise questions. Besides that, everything is on my PC and individual storage pins which I keep stored safe in the attic (they are 3 very small USB pins which are stored inside walls and properly concealed). They contain the required information for each of the coming phases. As soon as I have completed one phase I extract the information for the next phase from my pin, after I destroy my old hard drive. This has worked flawlessly so far. However, when I will start the actual manufacturing phase in a few months time, I will have no choice but to rent a cottage and/or small farm as I will require total anonymity while manufacturing and storing tons of materials.

I will not be able to update this log for a couple of months as I have to purge my old hard drive and store this information on a chip, externally. When this is done I will initiate the most critical of all phases; the “chemicals acquisition phase”. If I succeed with this phase I will have everything needed except the AN.

December, January and February 2011
When initiating the “chemical acquirement phase”, in end November/early December, I must admit I was filled with some angst. This was after all a critical phase, perhaps the most dangerous of all phases. If I messed this phase up, by being flagged, reported to the authorities etc. I would be neutralized before I could finalize my operation. Even when taking all possible precautions; I estimate it is a 30% chance of being reported to the system protectors at the national intelligence agency during this phase.

My concerns and angst relating to this phase impacted my motivation, to a point where I had to initiate specific counter-measures to reverse the loss of morale and motivation. I decided that the correct approach to reversing it was to initiate another DBOL steroid cycle and intensify my strength training. I also spent some time locating and downloading some new inspirational music. A lot of new vocal trance tracks and some inspirational music by Helene Bøksle. In addition; I decided I would allow myself to play the newly launched expansion: World of Warcraft – Cataclysm. The combination of these three counter measures, in addition to my 3 weekly indoctrination/ meditation walks, resulted in my morale and motivation again peaking.

I would now initiate the most critical of all phases; the “chemical acquirement phase” I will include a list of some of the items/components acquired during this period:

…

Continuation December log
As already mentioned; I initiated a second steroid test cycle: 3 first weeks on DBOL tabs (40 mg per day). Weight increased from 86 kg to 90 kg. No side effects. Cycle cancelled after three weeks because I felt I had to prioritize other tasks.

Pistol training November, December and January
Pistol training was initiated in order to fulfill the government requirement for purchase. 15 training sessions in November, December and January was completed and documented. The application for a Glock 17 was sent in mid January. Documentation and activity requirement was met. I joined my local pistol club back in 2005 for the first time but have only sporadically attended training until November 2010. The fact that I joined the club as early as 2005 was a planned move to increase my chances for obtaining a Glock, legally.

Rifle training December and January
3 rifle training sessions was completed during this period. The intention was to acquire a minimum of experience with, Gungnir, my semi automatic Ruger Mini 14, .223 caliber and to calibrate my Eotech sights properly at 100 meter distance.

December and January –
Rifle/gun accessories purchased –
10 x 30 round magazines –
.223 cal at 34 USD per mag. Had to buy through a smaller US supplier (who again ordered from other suppliers) as most suppliers have export limitations. An alternative supplier was located in Sweden but it would have cost 1.5 times more. Another possibility would have been to use Jetcarrier (or similar freight forwarder which allows you to order from a US address) but some companies have no- sale policies to New Jersey for this reason. Total cost: 550 USD

From Midway
– GG&G Picatinny Style Scope Base Ruger Mini-14, Ranch only: 95 Euro

– Aimshot Laser Sight and Flashlight Tri-Rail Barrel Mount: 30 Euro (3x picatinny/weaver rail)

– Allen Buttstock Shotshell Ammunition Carrier, 5 round Nylon (mounted on shotgun): 10 euro

– Loctite Blue Aluminum Threadlocker, cost 10 USD on Ebay, excellent for tightening screws on the alu rails used for fastening the holographic sight and 3 x sight.

From other suppliers
– LaserLyte Pistol Bayonet Quick Detachable – a picatinny/weaver rail bayonet purchased from Ebay using VISA/Paypal, cost: 62 USD.

– 4 x 30 round magazines for Glock 9mm from a national supplier, Capsicum Solutions, using VISA, cost: 230 Euro.

– Cammenga Easyloader for AR15/Mini14 from a national supplier, Capsicum solutions, cost: 70 Euro

– Hollow point ammo for .223 from a national supplier, 500 Euro. Had to research and use a cover when buying; bird hunting ftw.

– Slugs ammo for shotgun, 100 Euro, cover when buying; deer hunting ammo.

Equipment needed for creating chemical/biological ammo-

DREMEL Universal tool 200 series (the drill) –

DREMEL Workstation (used for stabilizing the drill in a stable 90 degree position) –

DREMEL Multichuck (allows you to use conventional drill bits on your dremel tool)
Total cost for these three items: 140 Euro from Pixmania.com

– 65mm Drill Press Vice (Quick Release) from Lathe Mill, ordered from Ebay via Paypal, cost: 33 USD (Anchortools.com). This item will hold the cartridge in place while I drill a portion of the lead core out of the bullet.

Note; I have concluded that .223 ammo is not suitable for creating bio rounds. The bullet simply lacks the size required to fit a deadly doze. 7.62 ammo would be preferable as it is more than double the size. 9 mm bullets are ok for this purpose, but I have to wait for my Glock license before I get access to 9 mm ammunition.

Other items bought from Clas Ohlson, general store:

– Manual filing set – Super glue, used for plugging the bullet after injection – De-isolation thong that lets you cut of the tip of bullets (looks like a wirecutter)

Other items ordered:

Marketing related
Casio EXZ 330 SR digital camera, for marketing purposes, from Expert, cost: 80 Euro. This would allow me to complete a photo session, without the need to use a professional photographer. I have used a professional in the past but it is obvious that the regalia I intend to use in the photo session will generate suspicion and threaten the security of the operation. Lack of professional digital equipment, green sheet background and other related and expensive photo gear can be compensated by my Photoshop skills.

Operational gear, components and accessories

– Latex tubing/surgical tubing 10” 1?4 1/32 wall latex tubing from Ebay 50 USD, used as the outer layer on a fuse to prevent early detonation.

– Ruger Mini 14 from national supplier, cost: 1100 Euro

– Trigger job on Ruger Mini 14, 100 Euro (bought in October I believe), to make the trigger lighter to press for rapid fire,

– Training ammo: 200 Euro – Barley Crusher MaltMill with 7 kg hopper, from barleycrusher.com, cost 250 USD incl shipping.

Received the Barley Crusher in January. I haven’t yet tested if it works but according to my calculation it should enable me pulverize fertilizer prills at record speed. When you attach a drill using a 3/8 drill motor at 500 RPM it should give you a crush rate of 3 kg per minute making the pulverization process of 2 tons of fertilizer fast and easy. The crusher rollers are adjustable at both ends so they can be adjusted according to prill size to ensure proper pulverization.

Fitness/muscle supplements

– 100% Whey Protein 9kg, cost: 250 Euro, for increasing muscle mass, 100 g per day in combination with training, top ranked protein supplement, short protein

– 100% Casein Protein 2 kg, cost: 70 Euro, for increasing muscle mass, 25 g per day before you go to bed in combination with training, top ranked protein supplement, long protein

– No-Xplode, cost: 50 Euro, pre-workout energy booster, this should also be used 10 min prior to mission

– Milk Thistle Herbal Supplement , 3 boxes, cost: 45 USD, Ebay, needed to strengthen the liver when using steroid tabs (Winstrol/DBOL). As steroid tabs are toxic for your liver you should use this liver supplement (3 tabs per day during a steroid cycle).

Logistic failures
I ordered an ASE Utra CQB-QM silencer (cost was 800 Euro) for my semi automatic rifle in September 2010 and the supplier, Intersport Bogstadveien, told me it would arrive in early January 2011. In January, the supplier told me ASE had suddenly cancelled all private orders due to the fact that they had just received a large military order… I’m not going to take the chance with a regular non-auto silencer because it might overheat and explode during rapid fire, with the risk of destroying Gungnir. I was not able to find another supplier of semi automatic silencers that could be sent to my country directly from the supplier or by jetcarrier. The only bonus I guess is that by eliminating the silencer aspect allows me to order and equip a bayonet instead. So I guess; “Marxist on a stick” will soon become an exclusive Knights Templar Europe trademark :D.

February
Initiated third steroid test cycle: 3 first weeks on winstrol tabs (40 mg per day) followed by 3 weeks of DBOL tabs (40 mg per day). Weight increased from 86 kg to 93 kg. No side effects. Cycle completed with great success. I have never in my life been more physically fit than I am today. Strength increased by 30-50% which will prove useful.

Creation of marketing movie trailer
Feb 15th to Feb 26th: created a 12.5 minute movie trailer (slideshow trailer) promoting the compendium: “2083 – A European Declaration of Independence”. All the slides were created in Photoshop. After 12 days of hard work I can say I am somewhat satisfied with the end result. I would love to make it even better but I really can’t afford to invest any more time into this trailer which might never see the light of day… Not happy with end resolution but higher res would just make the AVI file too large for efficient distribution. Was planning to hire a low cost Asian movie guy through scriptlance.com but I have to conserve my funds.

Other social related matters
After 5 years in the Freemasons I was finally accepted for rank 4-5 (it’s a combined rank). However, due to lack of time I decided to decline the offer. I told them I would be unavailable until Autumn 2011, due to extensive traveling.

Purchase of containers – primary, secondary and tertiary

To calculate the required size for cylinders (for primary, secondary, tertiary charge housings)

Google for an online Density Mass & Volume Calculator, like the following:
http://www.1728.com/density.htm

Mass: 12 gram (DDNP detonator content) You now need to find the volume and density Density: example density of water is 915 kg/m3 so density of the primer is approximately 700 Now, with the density and mass (700, 12) you can now calculate the volume

To calculate cylinder volume:
http://www.online-calculators.co.uk/volumetric/cylindervolume.php

With these calculations you now know the size of cylinder required for 12 gram primary, 500g secondary and 50 kg tertiary charge.

Cylinder housings purchased
Primary container (small, fits 12-20 grams) I bought the primary containers (detonator housing) from a general supply store. It was actually a long alu pipe which I intend to cut into three detonator housings. I also bought screws so that I may create lockable “ends” by using appropriate sized coins (placing two screws above and two below the coin. I was uncertain whether to select alu, copper or steel for the primary container but eventually decided to go with alu. Cost: 50 Euro Size: 10 x 1,6 cm (12g)

Secondary container (medium, fits 500-800 grams) I bought the secondary container (x 3) from IKEA, a metal toilet brush housing, the most expensive and robust alternative they had. I had reviewed various suppliers prior to concluding this transaction. Cost: 80 Euro. Size: 30 x 7 cm (692g), alternatively: 30 x 6,5 cm (597g)

Tertiary container (large, fits 50-60 kg) Ordered 3 x 61L barrels with a removable end cap(tertiary container) from a national supplier (Greif). Due to a minimum quantity policy I was allowed to leech on a main order placed by another company. After 3 weeks the order was ready for pickup. Cost: 90 Euro Size: 60 x 30 cm (52,8kg), alternatively: 75 x 45 (71,57 kg)

Fertilizer PP woven bags purchased
I was unable to find a supplier of this product in my country. I therefore ordered 60 units of large plastic bags able to contain 50 kg content (woven polypropylene, waterproof and robust fertilizer type bags, excellent for storage and transportation of chems). Chinese supplier found through Alibaba.com, cost: 50 USD for bags + 290 USD for EMS shipping courier. Paid by Western Union.

Cover story; I contacted 30 companies, a majority of them located in China and explained that I was planning to order 200 000 units per year with intent for distribution in Scandinavia. In this context I wanted to order 60 units for testing.

I don’t like lying, but I know from experience that you need a story like this if you want to prevent being ignored. These companies usually just ignore small purchases/inquiries.

I received the 60 units shortly after and they are optimal for their intended use.

Social life and continuation of cover
My best friends; Peter, 31, Marius, 31, Axel, 32, and Martin, 32, are now all in the process of settling down. Peter’s girlfriend Pia has a daughter, Mina, from another relationship. They are about to buy an apartment together. He’s currently in the process of selling his apartment close to Bogstadveien (not far from where I used to live), probably the best and most exclusive place to live as a bachelor in Oslo. Peter works as a co-captain on a supply ship outside the coast of southern US. He works 4 weeks on, and then has 4 weeks off etc. Although he and his parents fled from Soviet Hungary, they are unwilling to condemn the current cultural Marxist regime in Norway, possibly because they feel gratitude to the regime for welcoming them in the past. Peter loves to discuss politics but he’s not willing to take a clear stand on multiculturalism, possibly because he fears a future regime change, in our favor, may jeopardize his legal status. I have tried to convince him that it will not affect Christian Europeans, but he remains somewhat unconvinced. Regardless, he’s my closest friend and has been since I was 19. I have influenced him considerably the last few years, and vice versa, but I don’t consider him to be a fellow nationalist, as he doesn’t really care about anyone except the interests of himself, his family and his friends. This code, or rather lack of code, applies to the large majority of people though, so I don’t hold it against him.

Marius lives only 5 minutes away from my home. He’s been dating a very cute and nice girl named Christine for a couple of years now. She wants to settle down but he’s trying to delay it for as long as possible. He works as a fireman, quite ironic as I will soon ensure he gets his hands full… He has helped me out with my training regime as he is a die-hard fitness/bodybuilding person who has kept a very strict diet for several years. He’s a good friend (we’ve been “on-off” best friends since we were 11 years old – 21 years now)) and I often drop by his house. I guess Marius is the least ambitious of our group as he has traditionally focused all his energy on optimizing his physical and social image in relation to fitness for the purpose of hooking up with as many new girls as humanly possible, often at the same time. I think he has been with close to 1K atm including a Swedish midget :D. When it comes to partying, he’s a demi-god and I guess I can call him a master at what he does. His whole lifestyle revolves around having an optimal bad boy Playboy’ish image which includes multiple tattoos, perfectly toned muscles and endless partying etc. That lifestyle appeals’ to a lot of guys but few get to live it so fully. From my own experience, such a lifestyle does get very repetitive after a while though and you eventually just feel lonely and empty inside as everyone except yourself settles down. Regardless, he’s a great standup guy, and very fun to be around. Just ensure that you keep him at a miles distance away from your girlfriend when he’s drunk and it’s no problem at all :))

Axel works as a contract lawyer in the Norwegian Defense Department, quite ironically, with the acquisition of military equipment on behalf of the military forces pledged to defend the multiculturalist Kingdom of Norway. He’s currently the most career oriented of my friends. He and his girlfriend Synne has just purchased a new 650 000 Euro apartment. Everyone expects her to get pregnant soon as she is 35, he being 32. Axel is a really standup guy and is considerably more interested in high culture and discussing politics in general. Despite of the fact that he knows everything about the current Islamisation process and the indirect genocide of Europeans, he still says he supports “Venstre” (a multiculturalist party known for harsh demonization and vilification of cultural conservatives) but I now suspect he’s just saying that to tease me :))

Martin works for one of the more prestigious real estate brokers/developers in Oslo, Selvaag, and has just moved to Drammen with his girlfriend where they bought a house together, not long ago. She’s only 22 but has a son from another relationship. I haven’t seen Martin much the last few years as he has focused most of his energy on career advancement and his girlfriend.

Me, Peter, Marius and Axel (and a few other common friends) have seen a lot more of each other the last few months as I’ve had the opportunity to take some time off from the project. Traditionally, I have been the “glue/social administrator” of the gang, but in my absence, Peter has stepped up and has taken initiatives the last years. I still enjoy considerable respect and admiration from them in relation to my past achievements (establishing my company with 7 employees and making my first million at 24 and 4 million at 25-26). I believe, less than 5 self made individuals have accomplished more at that young age in my country. However, they just can’t comprehend why I halted my career at that point, which is understandable. It’s not like I can tell them that the only reason I generated those funds in the first place was to fund my current operation…

They, along with my sister Elisabeth, are constantly bugging me about getting a girlfriend as I’m the only one who is still single. I told them I will be dating again from August 2011, as I told them I will be moving to my own place then. I guess it’s the easiest way to avoid the social pressure. I also told them that I’m in the end phase of completing the research phase of 4 different business plans, one of which, I said, I will initiate from August. I’ve told them that one plan involves farming, one involves the design, creation and distribution of body armour with intent to become a supplier for the Norwegian Defense Department, one involves distribution of survival, gun accessories and other security related gear and I have also made hints about the mining project. Controlled distribution of information regarding these projects will potentially help me in the future, should one of them ever manage to stumble across sensitive information. Up until now, there has been absolutely no suspicion from them whatsoever as far as I can tell. I also told them that I’m in the end phase of my book project, which will be concluded by a final publishing tour visiting cultural conservative organizations in Western Europe followed by email distribution to 10 000 cultural conservatives around the European world.

I’ve also scheduled to meet my stepmom, Tove Øvermo, in March. She used to work as a director in Norwegian UDI (the foremost government organization tasked with approving applications and granting foreigners (mostly Muslims) legal permits). Ironically, UDI is a highly valued target for Knights Templar in Norway as it is an essential tool and facilitator for the Norwegian multiculturalist regime. However, I think she’s retired now, so she is currently not in danger of any KT attacks. Although I care for her a great deal, I wouldn’t hold it against the KT if she was executed during an attack against UDI, as she used to be a primary tool and category B traitor for the multiculturalist regime of Norway, high treason she should be familiar with. Tove, being very intelligent and committed in the advancement of her own career under the multiculturalist regime, is fully aware that she is a willing and participating subject/tool for the Multiculturalist Alliance in the indirect genocide of Norwegians through the continued Islamisation of Norway. People in her position are just unwilling to make any meaningful sacrifices as her career would be immediately terminated by the regime if she criticized them. Career termination followed by blacklisting and harsh vilification and character assassination is not a price most people of her position are willing to pay. Just like essential NS tools were guilty of facilitating the NSDAP, people in her position are guilty of facilitating the Multiculturalist Alliance. Regime sub-leaders such as her are on auto pilot though, and partly disconnected from reality and thus partly unaware of their own war crimes, since the multiculturalist media is ensuring that the public remain disconnected from reality and the truth. So when I meet her I will probably just end up talking about the usual social BS, to prevent raising any red flags. During our last meeting, I remember we discussed the central aspects of Wahhabism, and I was really impressed with her knowledge on the matter.

I have been storing three bottles of Château Kirwan 1979 (French red wine) which I purchased at an auction 10 years ago with the intention of enjoying them at a very special occasion. Considering the fact that my martyrdom operation draws ever closer I decided to bring one to enjoy with my extended family at our annual Christmas party in December. I brought the other flask to Marius` party a few days later and shared it with my friends. It was an absolutely exquisite experience that will not be forgotten. My thought was to save the last flask for my last martyrdom celebration and enjoy it with the two high class model whores I intend to rent prior to the mission. My interpretation of being a “Perfect Knight” does not and should not include celibacy, although some of my KT peers might disagree with me on this point. I believe that in order to strengthen the resolve, morale and motivation prior to a martyrdom operation, the Justiciar Knight should be encouraged to embrace and take advantage of a significant reward system designed to increase focus and remove any last doubts. A pragmatic approach, which involves acknowledging the primal aspects of man for the purpose of preparing him for a martyrdom operation, should always take precedence over misguided piety, which only increases the chance of jeopardizing the execution of the operation. And I believe the majority of war strategy analysts will agree with me on this.

Continued philosophizing about the future cultural conservative political model, when we, the cultural conservatives, again seize political and military power at one point between 2025-2083

I have been thinking about my post-operational situation, in case I survive a successful mission and live to stand a multiculturalist trial. When I wake up at the hospital, after surviving the gunshot wounds inflicted on me, I realize at least for me personally, I will be waking up to a world of shit, a living nightmare. Not only will all my friends and family detest me and call me a monster; the united global multiculturalist media will have their hands full figuring out multiple ways to character assassinate, vilify and demonize. They will possibly do everything they can to distort the truth about me, KT and our true objectives, and attempt to make even revolutionary conservatives detest me. They will label me as a racist, fascist, Nazi-monster as they usually do with everyone who opposes multiculturalism/cultural Marxism. However, since I manifest their worst nightmare (systematical and organized executions of multiculturalist traitors), they will probably just give me the full propaganda rape package and propagate the following accusations: pedophile, engaged in incest activities, homosexual, psycho, ADHD, thief, non-educated, inbred, maniac, insane, monster etc. I will be labeled as the biggest (Nazi-)monster ever witnessed since WW2.

I have an extremely strong psyche (stronger than anyone I have ever known) but I am seriously contemplating that it is perhaps biologically impossible to survive the mental, perhaps coupled with physical torture, I will be facing without completely breaking down on a psychological level. I guess I will have to wait and find out.

Regardless of the above cultural Marxist propaganda; I will always know that I am perhaps the biggest champion of cultural conservatism, Europe has ever witnessed since 1950. I am one of many destroyers of cultural Marxism and as such; a hero of Europe, a savior of our people and of European Christendom – by default. A perfect example which should be copied, applauded and celebrated. The Perfect Knight I have always strived to be. A Justiciar Knight is a destroyer of multiculturalism, and as such; a destroyer of evil and a bringer of light. I will know that I did everything I could to stop and reverse the European cultural and demographical genocide and end and reverse the Islamization of Europe.

I guess it is tempting for the many who have endured years of vilification, to just start believing the propaganda and embrace NS fully. However, I remain a staunch anti-Nazi and I blame NSDAP for the situation we are in. Hadn’t it been for the actions of the cultural right wing extremists known as the NSDAP our Western European countries would not be dominated by the cultural Marxist extremist regimes we witness today. If the NSDAP had been isolationistic instead of imperialistic(expansionist) and just deported the Jews (to a liberated and Muslim free Zion) instead of massacring them, the anti-European hate ideology known as multiculturalism would have never been institutionalized in Western Europe, because the Marxists would never have been so radicalized to begin with. The cultural conservatives would have been in a very strong and dominant situation today. Western European countries would have had cultural conservative doctrines similar to what we see in Japan and South Korea.

We must keep this lesson in mind. When we seize political and military power in the future; while tempting to unleash hell to avenge all our ravaged and dead brothers and sisters, we must keep in mind that replacing a cultural Marxist extremist regime with a cultural conservative extremist regime will only fail to break the cycle where history always repeats itself. So instead of replacing this tyrannical and extremist multiculturalist regime with an equivalent right wing one, we must think and act pragmatically with a long term objective. We must manage to break the historical “Marxist vs. Conservative” cycle or we risk that the cultural Marxists will emerge as a dominating force again after 20-100 years. As such, we should limit the executions of category A and B traitors to 200 000 in Western Europe. A better alternative than execution of the remaining, the category C traitors, would be to establish a large multiculturalist zone in southern/eastern Europe, perhaps Anatolia, or on other territories which has been invaded and occupied by Muslims. In these newly created zones; the cultural Marxists category C traitors and those of the non-Europeans considered as politically disloyal will be deported to and allowed to live and create their imaginary utopia. A cultural Marxist or a so called “internationalist” does not feel much love for his ancestral country as he believes we are all citizens in a global community. So they should recover easily from the process of being deported to another country.

Norwegian Intelligence Agency (PST) annual estimates – 2011
Feb 28th: The Norwegian Intelligence Agency (PST) just released its annual report on terror estimates in Norway. I have been waiting for this report for several weeks now. Apparently, it’s the same expectations as usual when it comes to Islamic terror; imminent danger. However, they then specify that the largest right wing threat in Norway is that a subsidiary of English Defense League (EDL); Norwegian Defense League (NDL) is in the process of gaining strength. They also state, between the lines, that both EDL and the NDL are dangerous and violent right wing extremists that adhere to racism, fascism and Nazism.

They conclude that they will ensure that any attempt to further develop NDL in Norway will be harshly suppressed.

I am not surprised that PST makes statements like this as the report has been designed by the Norwegian Labour Party, and does not reflect the views of actual PST operatives. The head of PST, Janne Kristiansen has never even worked as an intelligence officer, and is nothing more than a planted Labour Party agent, placed to lead the PST, against the will of most PST employees.

I know that the above description is nothing more than vile lies, a part of their psychological propaganda warfare against all cultural conservatives. I know this for a fact as I used to have more than 600 EDL members as Facebook friends and have spoken with tens of EDL members and leaders. In fact; I was one of the individuals who supplied them with processed ideological material (including rhetorical strategies) in the very beginning. The EDL are in fact anti-racist, anti-fascist and anti-Nazi. They even have many members and leaders with non-European background (African and Asian). They have worked so hard, and continue to work hard, to keep National Socialists out of the organization, but yet they are strategically labeled as racist-fascist-Nazi-monsters by the multiculturalist authorities. The EDL, although having noble intentions are in fact dangerously naïve. EDL and KT principles can never be reconciled as we are miles apart ideologically AND organizationally. The EDL even rejects taking a stand against multiculturalism which proves that they are even more naïve than Sarkozy, Merkel and Cameron who have all admitted that multiculturalism has been a failure and a disaster for Europe.

KT was formed back in 2002 as a revolutionary conservative movement because we had lost hope that the democratic framework can solve Europe’s current problems. The EDL, on the other hand, IS a democratic movement. They STILL believe that the democratic system can solve Britain’s problems… This is why the EDL harshly condemns any and all revolutionary conservative movements that employ terror as a tool, such as the KT. And this is why, we, the KT view the EDL as naïve fools, wasting all their energy monkey- screaming to deaf ears while they should instead have focused on means and methods that are meaningful in regards to achieving true political change, in regards to tearing down the multiculturalist regime known as Britain. Unfortunately, the only meaningful resistance at this point in time is to use military force. So instead of monkey-screaming, they should instead focus on strategically demolishing one of the many British nuclear power plants, which effectively would completely cripple the British economy, contributing to creating an optimal climate for significant political change.

Regardless; it is so obvious that the Multiculturalist Alliance feels it is important to label anyone who criticizes multiculturalism as racist, fascist, Nazi-monsters. It makes their job easier, as they can justify harsh suppression methods of all cultural conservatives. The truth of the matter is that the Multiculturalist Alliance and their tools are about to lose this propaganda war. The peoples of Western Europe are not stupid, and they know that less than half of the targets of character assassination are not what is claimed. I’m optimistic about the fact that the MA appears to have managed to paint themselves into a corner, and their false and desperate propaganda outbursts appears, for an increasing number of Europeans, to be stuck on auto pilot (similar to what was witnessed in the Soviet Union in the 70s and 80s). People are in the process of learning the truth about what is going on and the continued desperate propaganda outbursts only makes our job easier. It is not the cultural conservatives of Europe that are the monsters. It is in fact the Multiculturalist Alliance that are the true racist, fascist, Nazi-monsters. It is possible to avoid reality for up to several decades. The Soviet Union is proof of this. But eventually, the truth will be known as you cannot avoid the consequences of avoiding reality.

It is no longer a question IF the MA will crumble but WHEN the MA will crumble. They will lose when the Western European economy shatters, in combination with further Islamic colonization. And when this happens; the majority of the 340 000+ nationalist militants in Western Europe must be ready to strike hard and without mercy with the objective of seizing political and military power. We still have 14 years (2025) to arm ourselves, so let us continue to prepare for the coming coup d’état. Guns and ammo alone is not enough, you will need quality body armor, com/radio devices, rations and certain survival accessories as well. Chop-chop<3 For those of you who does not want to wait this long, should immediately ordinate yourself as a Justiciar Knight for the KT. Economic status (as of March 1st)
I decided to sell my dear Breitling Crosswind and my Montblanc Meisterstück pen in January in order to strengthen my operational budget. I was able to sell my Crosswind for 1800 Euro and my pen for 200 Euro.

My remaining budget is now:
In bank: 3750 Euro In cash: 3750 Euro Value of car: 4500 Euro Credit (9 credit cards): 28 750 Euro

Logistical plans ahead (as of March 1st)
I will shortly convert the public listing/definition of my company from regular to agricultural. This will allow me to acquire (rent) and register a farm with accompanying fields. The fields, registered through my company, will give me a specific “farming ID number” which is a requirement for ordering large amounts of fertilizer from the national supplier.

The cover I am using is; test production of sugar beet. I have created a 10 page “business plan” for this purpose, and have familiarized myself with the related terminology. As such, I am soon ready to place “rent adds” in agricultural newspapers, with intent to rent the farm/fields.

As soon as I rent the farm; I plan to move all my equipment to the farm house and initiate the “explosive manufacturing phase”. The operation will be executed shortly after the manufacturing phase is completed. Will attempt to initiate contact with cell 8b and 8c in late March.

Remaining items/components to buy:

• Plastic sheeting: 30 Euro

• Alu/wood ramp for loading/unloading truck: 30 Euro

• Fertilizer – large 500 kg bag: 1 x CAN, 1 x N34, 1 x 0-5-17 (for show), repeat after a couple of weeks: 2000 Euro

• Sementmixer – rent or buy: 100 Euro

• Ethanol 96%, x 6L: 30 Euro

• Blue Police – flashing LED light – for one of the trucks: 150 Euro

• Face – splash proof face mask: 30 Euro

• Fork jack – for 600 kg sacks: 200 Euro

• Plastic base for 600 kg sacks (used with above): 200 Euro

• Refrigerator: 100 Euro)

• Freezer: 100 Euro)

• Fume hood: 1,000 Euro, not yet decided

• Microballoons, 20 kg

• Glock 17: 700 Euro

• More ammo: 1,000 Euro

• Dunnage air-bag for transport load securing (centerload.com), bought from Ebay: 100 Euro

• Straps/net for securing large load in truck, may use alu/metal profiles with screws to support

Manufacturing of Picric Acid/DDNP
Foreword – why the manufacturing of picric acid as a secondary/booster and DDNP as a primary is the most rational approach:

As of 2011; the most popular primary explosive seems to be AP also referred to as Satan’s Mother. AP, although quite easy to manufacture, is an EXTREMELY dangerous substance which is likely to cause you great injury or even death. In the guides I have read about DDNP it is stated that this primary is very often disregarded since it is so difficult to make. This is deliberate misinformation as it is simply incorrect (If a chemistry amateur like myself can make Picric Acid AND DDNP on the first try then ANYONE can make it!!!). After merging 4 DDNP guides, I – who has no chemistry experience whatsoever, managed to synthesize DDNP on the first try. I tested the batch, and I confirmed the result myself. I even managed to create the first batch of DDNP with relatively impure picric acid. DDNP is more than 10 times as stable as AP and has more or less equal VOD (velocity of detonation). I even think that synthesizing DDNP was easier than manufacturing picric acid (which is considered to be perhaps the easiest secondary/booster to manufacture). In other words, the only reason you would not want to create DDNP as a primary is because you for some reason can’t get access to the materials required. So let’s review these materials and some of the equipment needed;

The following should be easy to acquire unless you’re called Abdullah Rashid Muhammad…:

Generic lab glassware
(EASILY OBTAINABLE): beakers, conical flasks, glass temperature rods etc.

Fume hood and fan
(EASILY OBTAINABLE): fume hood can easily be purchased or created using improvisation by using PVC plastic plates, screws, duct tape etc. You can use a 100 euro dust blower as a fan (I did and it worked perfectly).

Sulfuric acid
(EASILY OBTAINABLE): PA and DDNP – if you are having trouble buying this in bulk containers then simply buy 15 car batteries (new or used) which should contain approximately 2L of 28-37% sulfuric acid each. Just drill a hole in it (using protective gear) and pour it in a larger container. If you don’t need 1,5kg of PA booster and just want to create DDNP primary the required amount of sulfuric acid is less than 3L (which is boiled down to 1L of 90%+)!

Acetylsalicylic acid
(EASILY OBTAINABLE): PA – just buy aspirin at any drugstore. There are several brands of Acetylsalicylic acid (aspirin equivalents).

Sodium Nitrate
(MODERATELY OBTAINABLE): PA – you can order this at any drugstore as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria). You can also synthesize sodium nitrate quite easily (as long as you do it outdoors) by using ammonium nitrate (you get this from ice packs) and caustic soda (or was it acetone) if I remember correctly.

Sodium Nitrite
(MODERATELY OBTAINABLE): DDNP – you can order this at many drugstores as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria).

Sulfur powder
(EASILY OBTAINABLE): DDNP – you can easily acquire this from aquarium filters or by ordering online. It is an essential ingredient in Wiccan culture/religion so they can’t ban it for religious reasons.

Caustic Soda – powdered
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Acetone – liquid
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Ethanol (95%)
(EASILY OBTAINABLE): PA – you can easily buy this over the desk in all countries. Just buy concentrated sprinkler fluid (blue) used to clean windshields on cars. There are many names for the appropriate compound: isopropanol and butanol are other names. Go for ethanol or isopropanol if possible. I’m not sure about bio-ethanol sold at gas stations (from pumps) but that may work as well.

Detonator
(EASILY OBTAINABLE): there is no reason to make this more complicated than it has to be… by using mobile phone detonators etc. As DDNP is easily detonated by fuse; just order a few meters of regular visco fuse in December during the fireworks season. There are thousands of pyrotechnic enthusiasts doing this all over Europe and most of the shipments get through with little consequence if detected. Just order from a couple of suppliers so that you will get at least one of the shipments. You can also create your own fuses, in which case; just visit online pyrotechnic forums (every country has at least one) for instructions. When creating the detonator skeleton cylinder you can also add a couple of grams of gunpowder (the flaked gunpowder used in shotgun shells are good) layered above the DDNP in the detonator. For most fuses; 1 cm equals 1 second, so if you want 2 minutes delay just use 120 cm of fuse. Visco fuses are excellent for this purpose but there are even better ones at some sites.

General pyrowares:
much of the above can also be ordered online from pyro-chem sites. The best are located in Eastern Europe since regulations are less tight.

Conclusion:
there is absolutely NO GOOD REASON why anyone (unless flagged by the intelligence agency) shouldn’t be able to acquire the above materials and gear WITHOUT detection. The only thing that is holding you back is unfounded fear or laziness! Your fear for detection cannot be justified, unless you have an Islamic name <3 Ingredients needed for 1,5kg of Picric Acid secondary/booster

1. 10 liters of 90%+ sulfuric acid (requires 2 days of labour, cost: approx 200 euro)

2. 1.6 kg of Acetylsalicylic acid (requires 4 days + 2 days of labour, cost: approx 1500 euro)

3. 3 kg of Sodium Nitrate (pre-ordered at apothecary, 1 week delivery time, cost: approx 500 euro). This can also be synthesized relatively easily if you are having trouble buying it.

4. 80 liters of distilled water/distilled ice cubes (cost: approx 440 euro)

1.
10 liters of 90%+ sulfuric acid
Estimated time required: 1-3 days to purchase the product (28-37%) and it requires 2-3 days of labor to concentrate it to 90%+.

Boiling down 35 liters of un-concentrated sulfuric acid (28-37%) to 10 liters of 90%+ concentration

In order to concentrate sulfuric Acid bought from stores (containing 28-37%) you will have to boil down the liquid. In order to get 10 liters of 90%+ sulfuric acid you need approximately 30 liters containing 28-37%.

I bought a container of 25 liters (28%) from one supplier (supplies car shops etc) and I bought 5 bottles from 3 other retailers each containing 1 liter. I also bought 4 car batteries in case I needed more.

I was uncertain how I should approach the “boiling down process” at first. The guides I had reviewed suggested you use specialty hot-temperature porcelain plates, use of specialty lab beakers, use of cooking stones to prevent sprouting and to use all necessary protection gear. As such; I assumed you needed specialty cooking plates that could reach very high temperatures and that I would need boiling stones and specialty laboratory glassware that could sustain extreme temperatures. Needless to say; the guide was wrong on all accounts! You don’t need any of this to concentrate sulfuric acid! Not hot-temperature porcelain plates (any plates will do), not specialty lab beakers (any regular Duran lab beakers will do) and not boiling stones (I tried with boiling stones and it made it harder).

I initially bought 3 induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I used standard inexpensive lab beakers made from Duran glass btw. I also broke two other beakers made from Duran glass (crushed them to small pieces with a hammer under a towel) in order to use it as boiling stones (to prevent the liquid from sprouting).

As the induction plates didn’t work for me I purchased 2 regular single cooking plates; the more expensive ones with iron plates retailing for 140 euro a piece. I had a very cheap single plate from before. Using the boiling stones was a failure for me so I reduced the amount of stones until I decided to remove them all and try without. I was also unsure how to store the concentrated sulfuric acid once I was done boiling. Some sources said glass was required while other said you needed specialty plastic. This was incorrect, as I stored my 90-95% acid in regular plastic bottles, in both 1 liter bottles (the bottles which were intended for 28% sulfuric acid) and 4 liter bottles (bottles produced for distilled water). I encountered absolutely no problems doing this whatsoever ( I had them in these bottles for up to 6 weeks).

Boiling procedure
I did the boiling outside using a 10 meter electrical extension cord and I placed the cooking plate on a wooden TV rack I had carried outside. I wore a lab coat with apron with standard nitril washing-up gloves and a 3M half mask with 3M acid filter (nr. 60923 – multifilter). Skipping the stones made wonders and it quickly started boiling (set it on the highest temperature from the start). After 1,5 hours of boiling (concentration at about 70-80%) the more or less unnoticeable water damp developed into thick smoke (NOx gas). After around 2 hours of boiling the smoke was so thick I got really worried that my neighbors would notice it so I quickly cut the power. Even after turning it of it generated insane amounts of white smoke (NOx gas) for 20 more minutes. I then decided I had to do the rest during nighttime, not to attract any attention.

That night, I started the next boiling session with 3 boiling plates at around 21:30 since it got dark at 23:00 when the heavy smoke would begin to generate. I started with 1.8L of un-concentrated sulfuric acid in each of my 2 x 2L beakers and 600ml in my 1 x 1L beaker which was used on my “weaker” plate. I worked from 21:30 to 07:00 in the morning for three consecutive days before I finally was done. End note: I tried to extend the working day past 07:00 on day two which almost ended in disaster. At around 09:00 AM, I was about to put on my hazmat suit and 3M gas mask to start another boiling session when I noticed the neighbor just outside the house entrance. Had I not noticed this in time I would have to explain to him why I was wearing the protective gear, and that wouldn’t end well… So if possible, even when on an isolated farm; do the boiling between 23:00-07:00 if possible. No use taking unnecessary risks. I spent 5-6 days on this process considering the fact that I had to combat false information, misconceptions and work out efficient procedures . If I had access to this guide before I started I would have been able to shorten down this process to 2 days.

Additional boiling tips:

a. Consider buying 5 or even 6 single cooking plates to reduce the boiling time drastically. Cutting the boiling time in two will drastically reduce your vulnerability to detection considering the fact that you are forced to work outdoors.

b. You will quickly learn your “progress” (purity level of sulfuric acid) by evaluating the thickness of the smoke and how many ML has been boiled away. If you start at 1.8L of 28% purity just boil it until it reaches 550ml or so to be sure you have 90%+.

c. Unless you are using identical cooking plates you will want to adjust the amount of ML per cooking plate so that you have maximum uptime and so that the concentration reaches 90% on all plates at the exact same time. You will learn this after the first session.

d. Let the acid stand for 30-40 minutes after you cut power to the plates by unplugging the electrical cord extender.

e. You can store 90-95% sulfuric acid in plastic bottles.

f. Concentrated sulfuric acid does not fume or evaporate.

g. You don’t need to go overboard with protection. It will take 10-20 seconds for 90%+ sulfuric acid to burn through regular nitril gloves (medium thickness washing-up-gloves) and several seconds for it to burn through clothing. Just be rested and careful and you’ll be fine. I got several drops on my gloves on several occasions and I just wiped it off with a napkin (napkin quickly turns black) before it could burn through. Avoid the “one-time-use” super thin gloves, even if its nitril. The most important things to wear are regular nitril gloves, an apron and some kind of full face visor. 3M masks are excellent since they prevent fogging on the visor.

2.
1,6 kg of Acetylsalicylic acid
Purifying the aspirin to pure acetylsalicylic acid. All the guides I reviewed, around 8, had flawed or even dysfunctional methods. I had to locate an entirely different method from YouTube which proved to work excellently.

Estimated time required: 4 days to purchase the product in a secure manner (assuming each apothecary has a 2 box cap). You would need to set up an “apothecary route” visiting 20-30 apothecaries in one day, then wait 1-2 weeks for safety and repeat 3 more times the next 4-8 weeks. As soon as you have all the aspirin it will require 10 minutes to pulverize it with a regular stationary or handheld blender and approximately 2 days to synthesize.

Other reagents needed: distilled water, mineral and distilled ice cubes: around 40-50 liters

You will need purified aspirin equivalent to 2.5kg of aspirin tabs/270 boxes of 20 tabs (mostly containing 440mg (producer: Nycomed, brand name: Globoid) but about 1/6th was a different brand containing 500mg tabs (producer: Bayer, brand name: Aspirin). You will be synthesizing 1.6 kg or more of pure acetylsalicylic acid from 2.5 kg of impure aspirin tablets. The reason you need to purify the aspirin is to remove the 17% of so called “fillers”, stark etc. The maximum yield of pure acetylsalicylic acid you can extract from aspirin is 83%, if I remember correctly. I managed to extract aprox 67% (1.68kg out of 2.5kg) which is a good yield. It’s worth noting that all the guides I could locate online were either incorrect or significantly flawed. All the guides I read failed to inform me that if you heat the aspirin to more than 70ºC it will destroy the acetyl and convert it to salicylic acid which is worthless for our purpose.

Of course, I had to learn it the hard way and managed to create a lot of worthless goo… Fortunately, I eventually managed to locate a method that worked optimally and I only ruined the first batch.

a. Grinding the aspirin;
some retarded guides suggested I use a mortar and pestle… Needless to say, after a few hours, my wrists hurt like hell, and I realized this was an extremely poor method for the quantities I was working with. There must be a better way? I ended up experimenting and I found a very nice method. I put out a large plastic sheet on the floor and poured approx 1000 tabs on it, spreading it evenly. I then used a 20kg dumbbell (single hand weight used for weight training) and crushed the tabs with even strokes by using gravity. It took me less than 4 hours to crush all the tabs. In retrospect I realize that using a blender would be even better. Providing you use a blender (I prefer stationary, but I guess handheld works as well) which assures a good and even spread/circulation as you grind them (same principle as when grinding AN prills) it should only take you 10 minutes to grind up 2.5kg of aspirin tabs. It’s worth buying several brands of blenders to find out which offers the best circulation. Basically; only 1 out of 5 blenders offers appropriate circulation. Handheld blenders are probably the exception here since your motion determine the circulation, providing you grind it in an appropriately shaped container. With circulation I mean that as the lower part of the tabs get ground to fine dust, the heavy pieces of the tabs rise to the top until they are “sucked” down the “downward whirling current” – providing optimal grinding. I bought a total of 8 different blenders and only 2 of them worked efficiently for this purpose (at least for AN prill grinding). When completed; you now have 2.5kg of fine aspirin powder.

b. Manufacturing method

• 2.5kg of aspirin powder

• 5L of 95% ethanol (you can use the concentrated blue ethanol used for cleaning the windshield of cars for example, other types of alcohol works as well like isopropanol or butanol)

• Distilled water, distilled ice cubes: 40-50L
You will need 1ml of 95% ethanol for every tablet. This means that for 50g of aspirin (114 tabs x 440mg) you will need 114ml ethanol. Since you have larger quantities of materials you should use higher ratios as an effective way to save time:

I used the following ratios when manufacturing (these ratios are optimal!):

• 1040ml ethanol (I used primarily Isopropanol, 80-95% concentrated blue sprinkler fluid)

• 400g aspirin powder

• 6L distilled ice water

Alcohol note: I believe I used 95% concentrated sprinkler fluid: ethanol-Isopropanol (the liquid used for cleaning car windshields) but it might have been lower grade (80%?). I can’t know for sure since it wasn’t specified on the bottle. I performed a fire test and it burned, that’s all I know… 😛 I also made a batch with butanol (concentrated red spirits used as a fuel for some apparatuses). Since this batch was successful as well, I assume a large range of alcohols will do the job. However, I have read that methanol is not suitable.

1. In a 2L beaker, heat up 1040ml of 95% ethanol on a hot plate stirrer. Drop a spin bar in the beaker and start mixing in 400g of acetylsalicylic acid powder, under stirring, f example as the temperature reaches 50ºC. Very important; keep the heat between 60-70ºC. Do NOT let the heat surpass 70ºC as it will start to break down the acetyl and convert the compound into salicylic acid, which is useless for our purpose! The acetylsalicylic acid should be dissolved within 5-10 minutes if it is powdered, 10 more minutes if it is clumped, and up to 45 minutes if you are using whole tablets.

2. Filter hot, for regular gravity filtration you should use 4-6 funnels with 1-2 coffee filters in each (I used 1 but you should probably use 2) over f example 4-6 x 600ml beakers. Wash the 2L beaker with a small amount of ethanol and pour it through the filter to collect any residues. Then you may wash the filter 1-2 times with a small amount of ethanol to collect any residues. The compound left in the filter will be the aspirin fillers. Discard the filters and its content.

3. As you now have approximately 1.4L of ethanol-acetylsalicylic acid in your 2L beaker; pour 350ml into 4 x 2L beakers.

4. Place the first 2L beaker with hot 350ml of ethanol-acetylsalicylic acid mix into an ice bath. As an ice bath container; you may for example use a regular 10 liter plastic bucket (a 2L beaker fits this type of bucket perfectly with enough space for ice) filled with 0.5 liter of cold spring water and 3-4 plastic-pocket-sheets of distilled ice-cubes. You must use a weight of some sort to keep the 2L beaker submerged in the ice-water mix or it will float to the surface and fail to properly chill. You must now measure out approximately 5 times the volume of your ethanol-acid mix in ice cold distilled water that you cooled earlier. So for 350ml you will need 1750ml of distilled ice-water (very important; ensure that the distilled water is as cold as possible or you will not achieve maximum yield!). Add the ice cold water to the ice cold ethanol mix. This should more or less completely fill up your 2L beaker. The addition of the distilled ice-water will cause the acetylsalicylic acid to precipitate as it is insoluble in ice cold water.

5. Now filter the white slurry by gravity filtration using 6-10 funnels/filters/ 500ml beakers. You will obtain a white slurry-like compound in the filters. Remove the filters and its content, by wrapping them (so that the contents doesn’t fall out) and temporarily store them in a large plastic box. Empty the beakers (just pour the liquid in the sink) and get ready to repeat this process as soon as possible with your 3 other 2L beakers filled with 350ml of hot ethanol-acid mix. Try to complete the batch while the ethanol-acid mix is still hot as it might impact the yield if the hot ethanol-acid mix is allowed to chill to room temperature. I used more than an hour from start until I completed the last beaker and I didn’t notice any difference regarding the end result though.

Note:

• If you follow the above “aggressive” manufacturing method you should be able to complete all the batches (1.68kg total) within one single day of laboring.

• I managed to achieve a 67% yield (1.68 kg out of 2.5kg aspirin) because I was a bit sloppy when chilling the ethanol-acid mix (did not use weight to keep container submerged, and I could probably have chilled the ice water even more). If it hadn’t been for that I would have managed to increase my yield.

• The guide further suggest that you purify the acetylsalicylic acid a second time. I did not purify the acetylsalicylic acid. I do not know how this would impact PA production. Will the picric acid yield achieved be lower or even significantly lower if the acetylsalicylic acid isn’t purified a second time?

• Alternatively; you may use vacuum filtration for speed if you have the equipment.

Source:
http://www.youtube.com/watch?v=xHg1hx7Rf64

This method – further discussed:

Q1: Can you use cheap 70% isopropanol or methanol?

A: The extra water in 70% IPA would reduce the solubility of ASA and increase the amount of water required to precipitate most of the ASA. As for methanol, you have a lower BP and higher vapor pressure to deal with. You have to prevent loss of solvent (round bottom flask + condenser) and deal with the fire hazard (methanol is significantly more flammable, vapors even more so; and the flames in a well lit lab aren’t visible).

A: I used the 70% IPA and it worked fine. Just used a little more distilled water…

A: You don’t want to use too much alcohol otherwise you will dissolve other impurities such as triacetin. The ratio mentioned is the best ratio that has worked for me.

Q2: Is there any way to check if what I got is ASA?

A: An absolute way to test would be using FTIR spectroscopy or NMR spec. which may tell you what else is in the precipitate. If you want to test *only* for the ASA/SA in the precipitate, you could add sodium carbonate (CO2 = positive for ASA or SA), test melting point, etc. The easiest way though would be to add some metal cation that would selectively precipitate the ASA such as Cu+2, Ni+2

c. Gathering and drying
I chose to store wrap up the coffee filters containing the wet acetylsalicylic acid in a large plastic container until I was ready to process it.

I placed the filled filter papers on a super absorbent rag 5 times to get out most of the water. Afterwards I gently squeezed another rag on top of the papers absorbing even more liquid. I then used a plastic board, opened the seaming on the coffee filters and flattened them out like a pancake scraping off the content using a rubber scraper (the item used to evenly distribute cream on cakes is optimal).

After I had scraped out all the acid from the filter papers I spread the substance out evenly on the plastic board and placed the board in a room with an oven set to max. The temperature rose to around 30 degrees in the room. The day after much of the water had evaporated. I then semi ground the acid clumps and again spread it out evenly. After three to four days the acid was completely dry. Note: I’m not sure whether this is optimal way of drying as it takes several days for the acid to dry this way.

It would probably be a better idea to dry the acid in a large glass Pyrex dish in the oven at around 50-70ºC. 1.6kg would be too much for one dish so you would in this case have to divide it into 400g batches. However; I do not know for sure how this will impact acid, which is why I chose the hard way. It is definitely worth testing though as you will save several days drying it in the oven versus my other method.

You now have 1.6kg of acetylsalicylic acid and you have just completed the second most tedious task of PA manufacturing.

3.
Sodium nitrate
Sodium nitrate can be purchased from specialty chem stores, online or at an apothecary. It is commonly used to prevent bacteria growth in meat so many hunters buy it to prepare meat before freezing. Half a teaspoon is mixed with salt and other herbs and rubbed into 25kg of moose meat for example.

Alternatively; you may synthesize sodium nitrate relatively easily. However, I will not add the guide for this manufacturing method here.

4.
Distilled water
Always use distilled water when preparing and manufacturing acetylsalicylic acid and picric acid. You may buy it in car-stores as it is used as battery water. I ended up buying a total of 170L for creating 1.5kg of picric acid.

Practical tips – preparing large quantities of ice cubes: acquire a big freezer where you can store a lot of distilled ice (you fill the plastic “pocket sheets” with distilled water and squeeze the frozen cubes out of the plastic as your need arises). I converted 40-50L of distilled water into ice cubes this way (took me about 10 hours) and I filled up a large freezer for this purpose. You can only prepare smaller batches of ice cubes at a time though as you can only stack 2 layers of plastic ice- cube sheets at a time. Then you will need to wait 30-60 mins for it to freeze or the weight of the water will cause leakage in the lower levels of ice cube sheets. I also prepared ice cubes made from spring water. Just mark the plastic sheets of mineralized water with a large black X, from a permanent marker, on each side, prior to filling, so you know which sheet contains distilled and which contains mineralized water.

Producing Picric Acid
Now that you have prepared 1.6kg of acetylsalicylic acid and 9-10L of 90%+ sulfuric acid you are halfway into manufacturing picric acid.

See guide
I used the following measurement for creating PA. I had a negatively disproportionate amount of sulfuric acid so I used a little more acetylsalicylic acid and sodium nitrate.

In a 1L conical flask I heated 600ml (700 is optimal) of 90%+ sulfuric acid in a 1L conical flask up to 60ºC. I then, over the next 2-4 minutes mixed in 112g of acetylsalicylic acid under stirring (using a hotplate magnetic stirrer). I then turned off the heat as the nitration would ensure enough heating.

I then started the nitration process (adding 190g of sodium nitrate slowly the next 140 minutes. I added 0.3g each 15 seconds for a total of 1.2g per second making sure to keep the temperature between 60-70ºC. I kept the temperature at around 66ºC to be precisely. Keeping the temperature stable at around this heat is essential. After about an hour I had to turn up the stirring power to max as the liquid thickened.

After 140 minutes the solution was fully saturated (even though I had 24g of sodium nitrate left) and it “bloomed”. Blooming is like a reversed melting process in which the solution solidifies and no amount of stirring can stop it. I do not know for sure if this is correct as I have never seen a guide describing it. Regardless, I kept on stirring every 5 minutes for the next 30 minutes, and then every 10 minutes for the next 30 minutes to prevent the increasingly “growing” substance from overflowing. This was one of my “successful” batches which contained approximately 40-50% pure PA crystals. 80% of my batches “bloomed” in this manner. It took around 4-5 hours for the container with the unpurified PA to reach room temperature. The 1L conical flask was 800ml full. At this point, I could continue the process by slowly scraping out 400 ml of semi-clumps of PA into a 2L beaker with 500ml of distilled water and the rest distilled ice cubes (filled up to 1400 ml). After proper precipitation I poured it into 6 x 500ml beakers with the same amount of funnels/filter papers, saving the filtrate and pouring out the liquid into a 100L plastic bucket (which was later to be dumped near a death-sentenced-bush, outside 🙂

Corrections to previous guide based on my own experiences and research while producing 10 batches of unpurified PA. When I first started this production process I assumed I would end up with a relatively pure end product, perhaps 70-80% pure after washing a couple of times. Needless to say; it was significantly more time consuming than I thought and I had to learn the hard way due to significantly lacking and even misleading guides. The positive surprise though, was that handling PA was significantly safer than I thought. I started out as overly careful as regards to PA and metal. Although you have to be careful, know that PA is perhaps the most safe booster you can work with. Unpurified PA isn’t, in most cases, even flammable. So you don’t need an exceptional fume hood and fan. An improvised version will work just as well for this purpose. After I had bought a fume hood I invested in two fans, one cheap version (it was actually just a dust collector suction fan) retailing for 140 euro. I also invested in a much more expensive fan (especially manufactured to prevent explosion) retailing for 950 euro. It would seem I was way too paranoid as the only dangerous gas you ever need to worry about when manufacturing PA or DDNP is the NOx gas during nitration and also H2S and SO2 during DDNP manufacture when acidifying the sodium picramate solution but these gasses aren’t explosive at all. I was somehow worried that the anti-metallic nature of PA would prevent me from using a metallic fan-tube. However, using one is not a problem at all as all the PA remains in the beakers. So don’t worry at all about explosive gasses cause there aren’t any. And you don’t need a hazmat suit either. Just use regular nitril washing-up-gloves and a good 3M face mask with visor and acid filter/vapor gas filter (nr. 60923 – multifilter) and you’re more than fine.

A few guides states: after you mix in the acetylsalicylic acid with the 90%+ pure sulfuric acid, slowly mix in the sodium nitrite. A few guides did not even specify in more detail than this.

1. What many guides failed to mention and which I had to learn the hard way after ruining several batches; it is ESSENTIAL that you do the nitration (mix in the sodium nitrite) between 60-70ºC. I found out that if you mix in the sodium nitrite below 60ºC some of it turns into a layer at the bottom of the conical flask which grows ever thicker. This layer can potentially sabotage and ruin your whole batch. If the temperature suddenly rises this layer may suddenly “melt/loosen” and cause a nitration “overdose” as it mixes with the rest of the content which may increase the temperature with up to 20ºC within minutes and severely deteriorate the yield of the batch. This layer may also affect the magnetic stir bar and cause it to not stir properly. So make sure you prevent this from happening by keeping the temperature around 65ºC and never let it drop below 60ºC.

2. What ALL the guides failed to mention was the fact that the addition of the sodium nitrate increases the temperature of the content. So basically; as you start the nitration just after you add the acetylsalicylic acid at around 50-60ºC, you don’t need any heat at all during the process as you can keep the heat between 60-70ºC by adding sodium nitrite (or potassium nitrate). Rapid heat fluctuations is the most severe threat to your batch and temperatures above 70ºC (not exactly sure about 70ºC perhaps 75ºC) will deteriorate your batch and cause a significantly lower yield. By deteriorating I mean lowering your yield of pure PA crystals from an optimal 50% down to 10% in a worst case scenario.

3. What all except one guide failed to mention was the importance of the glassware you are using. I used 2 x 1L beakers and 1 x 1L conical flask. All of my beaker batches ended up with a very low yield for the following reason; the magnetic stir bar works significantly better in a conical flask. I had problems in the beaker as the stirring was significantly reduces (even at max power) due to the shape of the container and the fact that I had a glass temperature rod which very presence significantly reduced the stirring output created by the stir bar. In any case; use a conical flask instead of a beaker if possible.

4. On my most successful batch I used a 1L conical flask with 600ml of sulfuric acid (90-95%). On average; I added 1.2g of sodium nitrate per minute (for my two most successful batches). Instead of dropping 1.2g in one go each 60 sec, I added aprox 0.3g every 15 sec (in other words 4 times x 0.3g per minute). I sat there for 2 hours and 15 minutes doing that on my most successful batch (with 2 x 5 minute breaks). You can imagine the agony of sitting there with a 3M gas mask on a rotten chair with your back hurting adding 0.3g every 15 sec. Its repetitive, extremely boring and frustrating. You will start to curse the fact that you didn’t set up a TV nearby, or the fact that you only bought one hot plate stirrer instead of three. The prospect of doing this 10 times can be psychologically challenging. So take all measures to make your time more efficient. I managed to barely survive with my sanity intact thanks to my iPod <3 5. Acquire 3 x hot plate stirrers if possible. The nitration process is an extremely tedious and frustrating process. With three hot plate stirrers you can add 0.3g in three separate conical flasks speeding up this bitch of a task 300%. A hot plate stirrer retails for 300-500 euro so its affordable. Also, it's less suspicious to buy 1 than 3 🙂 as three mostly indicates that you are going to resell them <3 6. Creating PA proved to be a very unforgiving manufacturing method. Several things can go wrong, and most of these things relate to impatience -> too much sodium added per minute -> temperature rising to fast f example; I took a break a couple of mins too long and came back to see the thermostat at 59ºC. I tried to compensate with a little extra sodium nitrite, which didn’t seem to have any effect on the temp. I added more and suddenly the temperature exploded and ended at 81ºC. A couple of other times I got too impatient and added too much per minute (although at the time I believed that a temperature above 70ºC wouldn’t make a difference – I eventually learned that it makes all the difference). You need to be rested and focused before you begin this process (I was exhausted on several occasions which made me lose focus a few times and thus ruin the batch). As long as you focus and add the sodium nitrite 2-4 times per minute x 0.2-0.4g you should be fine.

Prepare mentally for the nitration process. Don’t start if you are physically tired or if you need to eat any time soon. Just prepare and if possible have a radio, TV or iPod at your disposal.

7. Don’t assume that the precipitate you end up with will be above 60% purity. Consider the precipitate you end up with grapes, whereas the actual pure PA crystals are the seeds in the grapes. If you do the process flawlessly the seeds will be large, but if you make mistakes, they will be significantly smaller. This will save you the disappointment I encountered:-). Out of 1.2kg of unpurified PA substance I ended up with only 200-300g of pure PA crystals. Had I done everything optimally I would have ended up with 1.5kg of unpurified PA substance and perhaps 0.8-1kg of pure PA crystals.

8. You can mix in the acetylsalicylic acid quickly. I never spent more than 5 minutes mixing it in, in the beginning of the process. As soon as you have mixed it in and it has fully dissolved you can start the nitration process. I usually mixed it in at around 60ºC and started the nitration process at around 60-65ºC.

Washing
It says in most guides that you need to wash with ice cold water 2-10 times. Basically, if you want to do this; just pour water over the filter to clean away sulfates. However, as you need to purify your yellow PA substance anyway, it is pointless to wash it! As I didn’t know this at that time I washed the PA-substance 2 times, and the batch intended to create DDNP; 4 times.

How to find out whether your yellow unpurified PA substance is pure

Fire test:
Purified (<80%) PA burns, unpurified PA (>60%) does not! I would imagine it would burn faster and more consistent the purer it is. I tried the fire test on all my batches of un-purified PA substance and none ignited, not even my best batch, even though I heated it until completely dry in the oven. I would therefore assume that you need a certain % of pureness for the substance to ignite – perhaps 50-60%+

Eyesight:
I found this out myself by observation of substance and comparing to the yield achieved by the purification process. The more pure your PA substance is the more it will “sparkle”. It is the pure PA crystals that make it sparkle. Needless to say; the more crystals, the more sparkles. Usually, an optimal produced batch of unpurified PA substance is pale yellow that “sparkles”. It’s worth noting though that one of my pale yellow batches had a very low yield so color isn’t everything and 100g of pale yellow PA substance can in fact prove to yield less than 20% of pure PA crystals.

IMPORTANT: DO NOT assume that your unpurified PA substance is suitable as a high explosive booster! On my test blast I used 3g DDNP with 50g unpurified PA substance as a booster. At this point in time I believed it was potent but wanted to test for sure. Needless to say, the completely dry impure PA substance did not detonate and was just spread all over after the blast. I later (when I purified the rest of the same batch) found out the yield in that batch was a lousy 10%, so no wonder it didn’t detonate.

Purification
Time required: 3-4 days for 1.5kg of unpurified PA substance.

Purification of the yellow unpurified PA substance is required as you need to be sure that the substance is potent. You will need approximately 40-50 liter of distilled water to purify 1kg of unpurified PA substance. You also need a 2L beaker for boiling/mixing and 20-40 other glass containers for chilling the liquid after the boiling/mixing. The chilling process will take up to 1-2 days so unless you have enough time, you should get A LOT of glass containers, to do everything in 1-2 batches.

Boil up 1.3 L of distilled water (70-80ºC) in a 2 L beaker. You don’t need a hotplate-magnetic stirrer for this as a limited amount of stirring is needed. In fact a regular plate would go considerably faster since it heats up faster.

Start to dump in the unpurified yellow PA powder (powdered or clumps – around 50 g, exact weight isn’t important). If the amount doesn’t saturate the liquid you can put more in, until it is no longer soluble and bits of PA floats around. Just ensure everything dissolved before you go to the next step. Have a container of 500 ml additional water nearby and add it once you need to dissolve the insoluble PA. You can regulate the temperature somewhat with adding additional water to ensure the temp doesn’t exceed 80ºC. I don’t know for sure whether temps exceeding 80ºC will deteriorate the PA but I read from another source to keep temp between 70-80ºC so no harm following that advice. It said another place to remove the brown oil droplets. I tried this in the beginning with a plastic spoon but noticed that it impacted the yield of pure PA as I also removed some pure PA floating around with the droplets. I only noticed the brown droplets in my first batch which was very poorly made, but not in the other batches. There will hardly be any so just ignore this altogether.

1 L of liquid is saturated with 15 g of pure PA so this fact allows you to measure the yield of your yellow PA powder and the number of grams you can expect to purify. 50g of yellow PA powder in my case yielded from 10-50% of pure PA crystals. My poorest yield was my first batch. 300 g of PA powder was almost inert and yielded only 30g of pure PA crystals. The other batches of PA powder was a better yield ranging from 15-50%.

When the liquid is saturated (you should have 1.8L of PA liquid), filter hot into glass containers. Filtering hot is not very important unless your PA powder is very unclean, like my batches (it was everything from bugs to other small impurities like pieces of plastic). I filtered 1.8 L into 4 x 500 ml beakers but since I only had 10 of these beakers I eventually started using all types of glassware. Since the crystals (when cooling slowly) “grow” slowly like bacteria I assumed using items which they use to boost bacteria growth would work in these cases as well. I experimented with various glass containers, different shapes and sizes. I used flat, long (long drink glasses), small, with everything from glass rods and plastic sucking straws in.

My findings were not 100% conclusive, in fact I’m still very uncertain, but I got the impression that certain shapes and sizes will allow for a greater yield. Smaller containers seemed better than large containers and adding plastic sucking straws so the crystals got more “surfaces” to grow from was a slight bonus. Beakers larger than 600ml yielded a lower result. I ended up buying 18 long drink glasses (each 300ml) which yielded an ok result. I was surprised to learn that the best yield was from a large circular glass bowl (5 liters) which I placed 1 liter of liquid in. It was an unclean bowl I had previously used to store my bananas in (in a plastic bag). In any case; the yield of pure PA crystals was 100-200% better than in other containers. I do not exactly know why; perhaps it was the dust particles in the bowl or possibly bacteria that promoted the increased growth. In any case; it indicates that the described purification method is flawed and the issue is worth investigating further. For obvious reasons, I don’t have time for more research into this issue. Also keep in mind that larger glass containers uses considerably longer to cool (several extra hours).

Cool the two 600 ml beakers to room temp. For a 500 ml beaker this took 4.5 hours and a few hours extra for the 2L beakers. I notices, however, that when I let the beakers sit overnight (for a total of 12 hours) there was considerably more PA crystals generated. However, I do not know for sure if this will impact the total of crystals generated after you have further cooled it down in the fridge. When the beakers and other glassware you might have used are at room temp (don’t hesitate to let it stand for several extra hours, perhaps up to a day or two, after it has hit room temp) – then, put the beakers in the fridge. It said in another guide that I was to put it in the fridge for one hour but I’m pretty sure he meant that I chill the liquid down to 4ºC. Considering that I was purifying 1kg of unpurified PA powder and I had A LOT of beakers and other glass containers, it took 12 hours in the fridge for the beakers to reach 4ºC (since the room temped containers raised the refrigerator temperature from 4ºC to 12ºC within the first hour…:-) So, if you have a small fridge, like I did, consider chilling the containers in a “transit location”, if possible, in order to shorten the “fridge time”. I used the cellar floor which holds 8ºC. This saved me a total of 36 hours of “fridge time”. Filter once the liquid hits 4-5ºC (perhaps we can even increase generation rate if we let stand even longer. I am really not sure about this but it is worth investigating further.

The other guide said: scoop the crystals out of the filter. However, I like to save the crystals in the filter until I have a large enough batch to process as it maintains the moisture well and keeps it cool. I also like to process the filter papers all at once by using a 2m x 1m plastic board. I open the “seam” on the coffee filter papers and flatten it out like a pancake. Then I use a plastic/rubber spoon like object (the item used to smear cream on cakes) to get all of the content out.

Storage
When you have taken out all the crystals from the filters, put them in a plastic box and keep them with at least 20% water content (no problem if you take them out of the moist filters – newly moist filters = approx 100% water content).

These should be used within 2-3 weeks or they may start to deteriorate and/or may increase sensitivity and thus become more dangerous to transport (according to another guide). If you store them saturated with alcohol in a sealed glass container, you can basically store them safely for 100 years +.put in oven for an hour.

Drying before use
Dry in oven for 30 mins to 4 hours based on water content between 50-80ºC before use. I dried the unpurified PA substance in the oven (no problem) but haven’t yet confirmed with pure PA crystals. It should be safe because I dried DDNP in the oven the same way, which should be considerably more sensitive.

Preparing 1,800kg of AN prills (CAN 27-0-0)
There are large 300-600L diesel tanks in most farms (for fueling the tractor) so just call the supply company and order the required amount of diesel. My 300L tank was almost half full so I ordered an additional 150L this way. I also bought 5 x 20L gas tanks to transport the diesel from the equipment building (where the diesel tank was) to the barn cellar (where I was going to manufacture the ANFO). Since a 20L plastic tank is too heavy to handle efficiently I poured the content into 5 x 4L plastic bottles which I had leftover from all the distilled water used previously.

When you make the order at your local farming supplier (the supplier near the farm you are renting) you should order twice as many “dummy fertilizer). Obviously, before you can make an order in the first place you need to register a “farming company” and acquire a “producing number” from your government. In other words, you have to register as an “official farmer” or you will not be able to make an order from the farming supplier. You should also have enough farming land to justify the order you are placing. 50-90 decares (5-9 hectares) should allow you to easily justify the purchase of 4-5 tons of fertilizer whereas half being CAN 27-0-0. If you do not take these precautions there is a chance you may not pass the scrutiny of the farming supplier as red flags will arise. Also. f example when you order 3 x 600kg bags of CAN27 you should also order at least 3 x bags of the two other types of fertilizer. I ordered 5 x 600kg bags of CAN27 and 5 x of 600kg “dummy bags” which proved to be too much for one person to process.

I then told the office to place the CAN inside of the equipment building and the rest outside. The supply truck uses a “hook” that can place the bag in a 3m radius of the truck. The positive thing about this is that I could close the building sliding door (3 x 3m) and further process the AN without anyone outside noticing.

I then brought 14 x 50kg fertilizer bags (previously ordered from a Chinese company, the bag has two layers, a carry layer and an inner plastic bag that prevents moisture getting in or out) and filled up the bags, transporting them to the barn basement by car (the barn basement is 100m away from the equipment building). When I had emptied 3 x 600kg bags I had around 36 x 50kg bags which I had transferred to the barn basement. Don’t worry about water absorption at this point as the prills have a layer that prevents the prills from absorbing liquid.

I bought several different blenders (both stationary and handheld) and found a suitable machine, which I bought 8 of. This blender, a stationary Electrolux machine with an ice crushing function offered optimal circulation of ground material vs. prills which allowed me to grind 1kg every 30 seconds. I set up 4 of these blenders 5cm from each other on a work bench with an empty 50kg fertilizer bag next to a bag filled with 45kg of AN prills (placed just below the 4 blenders so you can empty the blender glass containers quickly and pour it into the empty bag). You fill up each blender and put it on the lowest strength grinding (you don’t really need more grinding power than this and higher power will most likely wear out the blenders considerably faster). I made a nice rotation ensuring that the uptime of the 4 blenders. I then prepared 12 x 4L containers of diesel close by. Although ANFO requires 7% diesel for optimal detonation you should add 10% or perhaps even 13% like I did to account for any evaporation etc.

As you crush the prills to fine powder it will immediately start to absorb water from the air, so as soon as you have ground a portion you must hurry to pour the content in the empty bag. Once I had filled up 1/4 of the bag I added 1.7L of diesel, before continuing. You add approximately 1.7L at as you fill up the bag with 1/4, 2/4, 3/4 and 4/4. When completed I wrapped the inner bag (like the way you make a pig tail on hair) and closed it with 10 cm of duct tape. Then continuing to wrap, I left 2 cm of empty space before doing the same again. I then bent the upper wrapping down on the lower wrapping and closed it with more duct tape. I then wrapped the outer bag with two portions of 20cm duct tape. I don’t know for sure if this is optimal, but I couldn’t think of a more efficient way to seal the bag properly. After I had grinding 600kg of prills the first blender broke down (the knife handle broke). The second machine broke down shortly after. I replaced these with the backup blenders and continued until I was done preparing 34 bags x 50kg ANFO. By that Time 3 blenders had completely broken down and one more was partly dysfunctional.

Time required to prepare 1 x 50kg bag of ANFO using the above method
It took around 30-40 minutes to prepare each 50kg bag of ANFO. So I spent around 3-4 nights (from 23.00 to 8.00) working this way until I was completely done. I chose to work at nighttime because I wanted to do everything I could to prevent detection. I covered the windows and closed the door on the inside (I had to install a closing mechanism on the door). Due to the loud noise made from the 4 blenders you can’t really hear anyone approaching so I wrote a note on the door of the main building which encouraged them to call my mobile if they needed my presence (add a smiley <3). This work is very tedious so I had my iPod on for most of the time at max volume. I took a 5 minute break for every 2 bags I completed (so basically every 120 minutes). Occasionally, I would have to drive to the equipment building and fill up my 20L diesel containers. I originally planned to process 2 more 600kg bags of AN prills but I was so exhausted that I decided 1800kg would have to do. Mixing in aluminium powder and micro balloons in the ANFO
Adding 10% (by weight) of aluminium powder and 2-3% (by weight) of micro balloons will increase the sensitivity and power of your ANFO substantially. Considering the fact that we do not have access to 34-0-0 (much purer AN) I assumed adding at least the micro balloons would be required to ensure detonation.

Considering the fact that AN powder will absorb water so quickly I concluded that it would be appropriate to add the AL and MB after I had saturated the AN powder with diesel.

You now have around 36 x 50kg bags packed with ANFO

Adding aluminium powder and micro balloons
Commercial ANFO contains approximately 2-3% of micro balloons according to a couple of sources, which makes the ANFO more sensitive and thus requires only a standard blasting cap to detonate. However, commercial ANFO is much purer than the 27-0-0 CAN available to farmers.

I’m now going to mix in the AL and MB using:

45kg of ANFO 5kg of AL (I’m using 400 mesh(62 microns) leafed AL 1,2kg of micro balloons

For a total of 51.2kg per bag

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it was not going to be easy to open them without extreme risk (I thought). According to the warnings; contact with oxygen will risk detonation of the AL, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc can cause detonation.

At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I only managed to produce 200- 300g of booster I had no choice than to continue the AL addition.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosure, even if it involved high risk. Eventually, I manage to file open the enclosure. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of an abundance of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was approx 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

I plan to mix up 1.2kg of micro balloons per 45kg ANFO. I have a total of 40kg of MB in 5 large bags. It is a powder-like substance and inert. But according to the sources; when mixed with ANFO or ANALFO it will generate hot spots and thus making the ANFO or ANALFO more sensitive. I just hope I have the correct type of micro balloons… I assumed that the micro balloons were 2 mm in diameter but these seems to be 0.2 mm or so.