Oslo bomber was less Christian Jihadist than Dexter, Arrested Development

Nike Swoosh logo adapted for Dexter serial killer tv series, pattern for Oslo bomber Anders Behring Breivik

Another excerpt from Breivik’s dairy, covering the preliminary phases, backdated to 2002:

Personal reflections and experiences during several preparation phases April/May 2002

I am the Norwegian delegate to the founding meeting in London, England and ordinated as the 8th Justiciar Knight for the PCCTS, Knights Templar Europe. I joined the session after visiting one of the initial facilitators, a Serbian Crusader Commander and war hero, in Monrovia, Liberia. Certain long term tasks are delegated and I am one of two who are asked to create a compendium based on the information I have acquired from the other founders during our sessions. Our primary objective is to develop PCCTS, Knights Templar into becoming the foremost conservative revolutionary movement in Western Europe the next few decades. This in relation to developing a new type of European nationalism referred to as Crusader Nationalism. This new political denomination of nationalism will become the foremost counterweight to National Socialism and other cultural conservative political denominations, on the cultural right wing. Everyone is using code names; mine is Sigurd (the Crusader) while my assigned mentor is referred to as Richard (the Lionhearted). I believe I’m the youngest one here.

I am going to discontinue my involvement in the Norwegian Progress Party as I have lost faith in the democratic struggle to save Europe from Islamification. After 65 years of harsh political oppression, demonization and ridicule from the communist-globalist cultural establishment, directed at any and all who opposes multiculturalism, there are still no indications that this communist-globalist hegemony will ever allow PP to take control. My party is systematically vilified and sabotaged by a united media before every single election. And even if they ever did manage to form a majority government with Høyre (the Conservative Party) their principles and party program would not be conservative enough to halt the ongoing Islamic demographic warfare OR increase the ethnic Norwegian fertility rate from 1.4 to 2.1. The only thing PP has achieved so far is to give false hope to Norwegians. They say that democratic struggle is the only solution, when it is clearly already lost. How can we democratically compete with a regime that is mass-importing hundreds of thousands of new voters? The PP is pacifying Norwegians by giving them false hope and I refuse to continue to have any involvement in this. Armed struggle appears futile at this point but it is the only way forward.

2002-2006
I am required to build a capital base in order to fund the creation of the compendium. I don’t know if I will ever proceed with a martyrdom operation at this point as it simply seems too radical.

My plan A is to attempt to acquire 3 million Euro, in which case I plan to establish a pan- European organizational platform that will attempt to grow organically as a support organization which will distribute a “legal version” of the compendium.

If I fail to generate the specified amount I will move forward with the operation, in order to market the compendium that way.

As of 2005 I have managed to generate 500,000 Euro, but I am still 2.5 million Euro short. I will attempt to generate the remaining amount through continued stock/options speculation. I can afford to lose up to 250,000 Euro without it compromising the completion of the compendium and the subsequent effectuation of the operation.

Stock/option speculation did not work out. I will need to cut my losses and proceed to plan B.

After cutting my losses, I now have a minimum of funds to complete my two tasks (in excess of 250,000 Euro).

2006-2008
Researching and writing the compendium: “A European Declaration of Independence”

Autumn – 2008
I attended a birthday party in Oscarsgate, Oslo. We were attending a birthday party organized by a good friend of Axels’ girlfriend, Synne. I noticed the woman who celebrated her birthday was working as a judge. A majority of the people at the party where jurists – judges and lawyers in the public sector. I chatted with most of the people at the party. It really struck me how incredibly politically correct everyone were, as if they were all members of the Norwegian Labour Party. I have never before experienced a group of people who are completely freaked out about discussing political issues relating to multiculturalism and Islamization. I noticed a majority of these people were Labour Party sympathizers. I guess they don’t really have a choice considering the fact that they are all climbing the public sector hierarchy. A thought occurred. The judges during WW2 who had party affiliations with the NS or any affiliation with the SS were prosecuted and imprisoned. Is it therefore only fair that judges of high rank with party affiliations to the Labour Party and the other parties who support multiculturalism (and therefore Islamization) are to be considered category B or C traitors? They obviously have a considerable responsibility and should be considered traitors of their people. I would imagine most of them would be considered category C though as their influence is considerably less prevalent than that of any parliamentarian, editor/journalist or university professor/lecturer. In any case, nice people though and we had a good time. If only they had any idea that one of their guests was a Justiciar Knight of an organization affiliated with the Norwegian and European Resistance Movement, I would be thrown out immediately most likely. It is completely understandable as their careers would be over if they had any affiliation with such organizations or individuals.

Autumn – 2009 – Birthday party
My best friend, Peters, 30th birthday. We are going to Budapest to party hard for 5 days. This is my second trip to Hungary. I really love that country and the people. Clubs in Buda are top notch. Excellent elektronica scene, among the best in the world. Hungarian girls are hot as hell, too bad I have to avoid relationships for the good of my mission. Doesn’t hurt having fun though 😀 I don’t think I’ve consumed this much alcohol for many years, totally awesome. My best friends, Martin, Axel, Marius and Peter went down and hooked up with another band of Norwegians we have known for some years. One of Martins best friends are Jon-Niclas, really cool guy. He’s a rather well known Norwegian comedian, together with his partner and friend Anders, and a few others. We had a lot of fun down there, the ten of us. Most of us know each other from Nissen High School in Oslo.

Autumn – 2009 – Phase shift
I’m in a phase shift with my project. The compendium is complete and I currently preparing for the next phase. I’m creating two different and “professional looking” prospectuses for “business ventures”. A mining company and a small farm operation. The reasoning for this decision is to create a credible cover in case I am arrested in regards to the purchase and smuggling of explosives or components to explosives – fertilizer. In this regard I created a new company called Geofarm, which might act as a credible cover for such activities. I spent about 2 weeks cannibalizing an existing Mining prospectus. In addition to the prospectus I have created I will create two websites and business cards. I also intend to contact suppliers of equipment related to these industries so that they may act as future witnesses, collaborating my story, should I ever need it. If I do get arrested in this “acquirement phase” I figure that they will have a hard time proving that my intention is to contribute and fight in the ongoing European civil war. Sure, they will attempt to charge me with terror but they will not have enough evidence to incarcerate me (due to my covers). Also considering the fact that I have never done anything illegal in the past. If I do get caught I will, however, be placed on every imaginable watch list for the rest of my life and will thus be unable to partake in any advance operation. In this case I will have to cancel the primary operation and instead go with my secondary operation of lesser significance. Such is the life of a resistance fighter.

November – 2009
I’ve spent a few weeks contributing to set up a cultural conservative newspaper with national distribution in Norway. The idea is to develop Document.no, a cultural conservative blog into a newspaper company with 12 publications per year. I’ve developed a relatively complex strategy and forwarded it to Hans, the editor and manager. I have made a few attempts to seek funding although my efforts haven’t materialized yet. I tried to formalize cooperation between the Progress Party and Document (both moderate cultural conservative entities), at least in an incubation period. However, after discussing this with both FrP and Hans it would appear as they do not want to take part in any form of cooperation with each other. I have spent approximately 50 hours developing potential strategies for Document.no, pro bono, but I will have to limit any further involvement due to my primary operation. Hans Rustad, the leader of Document.no, seems like an odd fellow. I’m usually excellent in psycho analyzing people but I haven’t figured him out at all. I know he has a Marxist background and I believe he is in fact something of a rarity – an actual national Bolshevik, and thus not a real nationalist. He likes to criticize the multiculturalist media hegemony in Norway but is completely unwilling to contribute to create any form of political platform or consolidation. He seems extremely paranoid and suspect of most people and he likes to attempt to ridicule and mock Fjordman, every time he writes a comment. Document.no has developed into a kind of moderate cultural conservative think tank where moderate cultural conservatives exchange thoughts and make comments on the articles posted. Hans likes to criticise cultural Marxist media (MSM) but is unwilling to present any solutions or to contribute to any form of consolidation of an “alternative”. Despite of that, I don’t mind contributing somewhat as it benefits our cause, regardless.

December – 2009
I’ve now worked with email farming for two months. God, I wouldn’t have imagined it was going to be this f…… boring 😀 I’m using Facebook to target various nationalist related groups and inviting every single member. I’ve managed to farm approximately 1,700 email addresses this way. I did generic swipes of various blogs and internet sites earlier this year as well. Total number of email addresses is approx 3,000-5,000, haven’t made an exact count yet <3 Ofc, it’s a quite tedious task due to the fact that Facebook has a 50 invitations cap per day. Even with my two accounts I’m limited to inviting a maximum of 100 per day, where an average of 40-50% accepts. Of these 40-50% around 90% have email addresses whereas approx only 50% are checked on a regular basis. So of 1,000 Facebook friends I will achieve a penetration rate of around 20-30%. Not optimal but then again, I can’t think of a more efficient way to get in direct touch with nationalists in all European countries. Christmas – 2009
Have been in a few Christmas parties with friends, fun although I’ve gained some extra kilos 😀 I’m currently 7 kg overweight up 3-4 kilos the last three months. I started the hardcore training program a few months ago but chose to end it in order to complete the book and email farming process. At this point I’ve extended the writing phase 4 times due to the urge to extend certain chapters. These delays are starting to severely affect my budget leaving me with less than 42k Euro in direct funds and another 25k in credit. I really need to finalize this compendium soon and move on to next phase (research into weaponry, armor and explosives followed by acquirement phase). Will have to destroy my old hard drives and buy new ones before the research phase, and then destroy these ones again before acquirement phase. It takes ages to farm quality email addresses from Facebook.

Anyways, moral is on an all time high but physically I’m at an all time low. I really need to start my training program soon… but still aprox 1-2 months before my time budget allows me to focus on this. Btw, I just read that an alleged Swedish neo-Nazi group, who allegedly planned to assassinate Swedish category A and B traitors, had been uncovered in connection with the theft of the “Arbeit macht Frei sign”. Hmm, I always wondered if these guys are actually National Socialists or if it’s just typical cultural Marxist propaganda. Perhaps it’s my fellow co-founder of PCCTS, my sister-cell??? I guess I won’t find out unless they publish the names. I doubt it though. They seem to be using the outdated, traditional and vulnerable hierarchical military cell-model which indicates that they are from an old school and un-related resistance fraction.

January 2010
I was out with Peter and Didrik today. We had some drinks at Peter’s bachelor pad near Bogstadveien, probably the most prestigious place to live for bachelors in Oslo and not far from where I used to live when I was still in the “game”. We then went on to a nearby restaurant, had an incredible meal, drank some more and met Peter’s girlfriend and her friends. We had a few beers and talked, very cosy <3 I remember telling Christine about my career as a writer, telling her that I wasn’t planning on actually selling the book but rather to distribute it freely in order to more efficiently propagate our cause to a broader audience (they were all cultural conservative btw). Christine told me that she believed I was driven by idealism, which is of course true, but that I actually lived my dream. While I didn’t want to start to argue that particular factor, as I don’t like appearing like a pooper or to risk blowing my cover, it got me thinking. Are, we, the reactionary revolutionary conservatives really living our dream or are we making a sacrifice? To be honest, if I felt that other people could do my job I would not do what I do, that I can guarantee you. I don’t want to do what I do, I would rather focus on starting a family and focus on my career again. But I can’t do that as long as I feel like a person caught in a burning spaceship with nowhere to go. If you see the ship is burning you don’t ignore it and start cooking noodles do you? You put out the fire even if it endangers your life. You don’t enjoy putting out the fire but it is your duty to yourself and your fellow crewmen. And let’s say your crewmen have been infected with a rare virus that shuts down their rational senses and they try to stop you from putting out the fire. You can’t really allow yourself to be stopped by any of them as it will lead to your collective death. You will do anything to put out that fire despite of the fact that they are trying to stop you. Anything else would be illogical. But sacrificing yourself for others who probably detest you for it doesn’t necessarily have to be a miserable experience. After all, we have the truth and logic on our side and we will learn to find rewards and comfort in our actions. After all, sometimes being uncompassionate is the most compassionate thing you can do. Anyway, back to email farming on Facebook, aaaaarrrrggh :/ It’s driving me nuts, lol. I’m currently working on French leads/FB groups. An extremely tedious and boring task – preparing quality contacts from scouring patriotic Facebook groups and sending out 100 select invitations per day (from 2 FB accounts). I’ve been doing this for 60 days straight now, 3-4 hours per day. FB networking isn’t all that bad though as you do meet a lot of interesting, like minded people. This is the main reason why my book has been delayed. I just feel that I must send my book to at least 10 000 primary nationalists in the European world and I’m currently at 6000 email addresses. Good vocal trance music makes this task a lot less boring ;). My funds are depleting gradually though; currently at 50,000 Euro + 30,000 Euro in credit limits (12 credit cards ftw), which will force me into the next phase of the operation soon. A usual day for me involves email farming, writing, sharing “moderate” resources from my book on debate groups to coach fellow cultural conservatives, smoking, eating chocolate lol, taking a daily 1 hour walk/motivational meditation and doing some occasional battlegrounds in WoW on my badass Horde resto druid. I just completed Dragon Age Origins not long ago. A brilliant game! 😀 It’s important to have fun a few hours every day. I regret to admit that I’ve become a notorious downloader of pirated movies, series and games etc. but have noticed that an increasing number of sites have been closed down lately. Stealing is bad, I admit, but then again, when you have devoted your entire life to a good cause you can allow yourself some naughtiness especially if it can contribute to conserve your funds, cough ;). Yes, yes, no one's perfect 😛 February 2010
I just bought Modern Warfare 2, the game. It is probably the best military simulator out there and it’s one of the hottest games this year. I played MW1 as well but I didn’t really like it as I’m generally more the fantasy RPG kind of person – Dragon Age Origins etc .and not so much into first person shooters. I see MW2 more as a part of my training-simulation than anything else. I’ve still learned to love it though and especially the multiplayer part is amazing. You can more or less completely simulate actual operations.

I’ve continued with email farming until now, on a daily basis. The email farming phase is coming towards its end and I will conclude it by at least attempting to acquire as many email addresses to members of parliament in Western European countries as possible. Because I think focusing solely on distributing the compendium to patriots would be a mistake as they have little to no political influence in the EUSSR/USASSR hegemony. It is important that our enemies know “how we see what they are doing”. The national intelligence agencies of Europe will do everything they can to limit its distribution. They will not allow the parliament members of any nation to read it, so we must send it directly to them.

It’s a shame I have to purge my 5,000 Facebook contacts. It took so much time and work to acquire all those contacts and I get the feeling I’m purging a little piece of my life, lol. But I did get what I came for after all; every individuals email address.

It is still too snowy and cold to initiate the acquirement phase (acquirement of weaponry and armor etc). My agenda the following months looks like the following:

1.
Conclude email farming

2.
Conclude the writing of 2083 and secure it. This post will be one of my last entries. I will have to secure the compendium at a safe location until the week before operation (today is Feb 7th btw).

3.
Change hard drives (phase shift), purge all evidence from other phase.

4.
Initiate the research phase: research the possibilities for the acquirement of weaponry and armor, the making of WMDs (explosives), acquirement of components of WMD, research of logistics and storage opportunities.

I have budgeted 2 weeks for the research phase, but it might take up to 6 weeks.

The research phase will be followed by the acquirement phase where I have budgeted 4-8 months. The acquirement phase will be followed by a one week only construction/preparation phase.

Btw, I just received what looks like a mass recruitment message from one of my 5000 Facebook contacts (he’s wearing a balaclava in his pic btw with a t-shirt with the SS skull insignia). The message goes like this:

Hails!

“help support are worldwide organization ATB Aryan Terror Brigade a branch Of blood and honour, if you are interested reply…..”

While I have to admire the young lad’s initiative and probably noble intention (he probably doesn’t have the faintest clue what National Socialism or constructive and meaningful resistance is) the lack of subtlety and discretion is unfortunately the current trademark of many European amateurish resistance groups. They probably want recruits in their Jew/immigrant bashing efforts… Many of these people are causing so much damage to the nationalist cause that I sometimes wonder if they are on the payroll of the cultural Marxists. Regardless, my hope is that this compendium will contribute to a significant “leap in evolution” of the current climate of cluelessness and incompetence.

March 2010
I have ended my “email acquisition phase” ending up with a grand total of 5,700 Facebook contacts (2 accounts) and a total of 8,000 high quality email addresses (representing all spheres of cultural conservative thought). I now have a direct way forwarding my compendium to a good portion of the most dedicated nationalist oriented individuals in all Western European countries, including the US, Australia, Canada, South Africa, certain Eastern European countries, Armenia, Israel and even India. This task has taken me several months and it pained me to purge all my FB contacts. I’ve talked and discussed with hundreds of patriotic individuals (many whom are nationalist oriented intellectuals fighting the good fight), many good people, which made the decision to purge the contacts even harder. I have now moderated by FB profile considerably and transformed it to a politically correct profile. I do fear sometimes that my endeavors relating to the research of the book, and acquisitions of these addresses has resulted in me being put on various watch lists. I know that at least a few of the profiles I invited are fake, and used for information gathering for various European and US intelligence agencies. The question is; have they flagged me? I guess I will find out eventually…

I went ahead and sold some of the last sets of items I possessed, from my former life, which had value. It was a complete 40 piece Versace-Rosenthal dinner set worth approximately 5,000 Euros. I bought it a few years ago for 2,000 Euros and just sold it for that price. I know I should sell my Breitling Crosswind (new price: 7,000 Euros), but sentimental value has thus far prevented me from doing that. Actually, I still have a corporate HP printer (new price 4,000 Euro). I may attempt to sell that later as it’s pointless for me to own one. I do have a quite large booze and wine collection which I have collected over the years. Several of the red wine flasks are from 1979, and therefore possibly worth a fortune. I do appreciate a glass of vintage red wine so I may actually drink it, prior to execution of operation. I have given away a few of my paintings to friends. I will keep the rest hanging, as I still appreciate the works.

The compendium is in its last phase. I have worked quite hard the last two months to complete it. I estimate that I will be able to complete it within 2 weeks.

Time is of the essence, and I really need to start the research phase (for the actual operation) and begin on the physical transformation phase. I have to wait until I have secured the compendium at multiple locations and purged and destroyed my hard drives.

Moral is peaking. I can’t wait to share the compendium with fellow brothers and sisters. This will be one of the last entries btw. I may or may not add more to this log prior to execution of operation.

July 2010
I recently successfully finished the “armor acquisition phase” and have created an armor cache by secured a full Pelican case underground. I basically dug it down somewhere deep in the Norwegian forest. It was my first experience with this type of assignment and I underestimated the planning needed to complete the job. A few days ago, I got up at 5.00 in the morning and spent a couple of hours packing for the trip. By using Google Earth I had selected a desolate location (approx), deep in the forests of Norway. I did not yet know the exact location when I set out on the trip, loaded with my cargo. The Pelican case contained a complete set of Lokis armor – shield included, caltrops, police insignias and various other equipment needed for the operation. I was unable to place the Damascus FX- 1 Flexforce riot suit and the Molle, pouch carrier in the Pelican case so I stashed it on the attic marking it as “air soft equipment”. That will have to do… The Pelican case was so full I had to physically sit on it to be able to lock it properly.

Anyway, after about a 3-4 hour drive I arrived at the area and I started to scout for small roads of the highway, as a car parked by the highway would cause unwanted attention. I found one potential location and drove my little Hyundai weenie car down a dirt road. These cheap urban cars are obviously not for off road use so I almost ended in the ditch. I parked the car and scouted the area on foot for an hour but with little success. An appropriate location involves finding an area with soil that you can actually dig in so it excludes areas close to rocks or near trees (all the roots will make it too hard to dig). I drove for half an hour and started scouting another location. I found what I thought could be an appropriate dig site and fetched the shovel and two big plastic covers for initial testing of the soil. I could tell by the topography that not many people had been here before. The forest was very compact with a lot of spider webs, and hundreds of flying bugs around. I have serious issues with spiders so I just had to block those thoughts out. Of course, it was a giant rock just 10 cm below the soil of my first attempt… Regardless, I continued digging close by and eventually found a suitable spot. When in the “identification process” you should expect a few unsuccessful attempts. You should at least dig 1.5-2 meters vertically and you obviously need a little bit of luck. I was considering getting an echo sensor gadget for this purpose, which can reveal whether there are obstructions below the ground etc. However, getting one would be a hassle, so I just decided to do it the old fashion way.

I started digging at 11:00 and continued for three hours straight. There were a lot of mosquitoes annoying the hell out of me despite of the fact that I was covered in anti-mosquito oil. Why oh why didn’t I bring a mosquito head-net… Due to the intensity of constantly digging, the heat and sweat forced me to remove everything except my boots and my Skins compression gear. The bugs had a field day for sure… Digging for hours is exhausting but I continued pushing my tolerance level as I really wanted to finish before dark. At around 16:00 I was out of water, I had emptied by 1.5 litre Camelbak pouch. I had been digging continuously for 5 hours and was completely exhausted, yet I hadn’t even finished digging the hole… I was getting increasingly frustrated as I couldn’t go on much longer without water. As I didn’t want another day of this hell (4-6 hours driving total + digging) I made the best out of the situation and went to prepare the cargo in my car for transportation to the dig site. I had originally planned to split the content of the case into four and carry it in my backpack to the site. The case was too heavy to transport in one go without problems. Unfortunately, with my water issue I really had no choice. I literally dragged the 70 kg case to the dig site. It was extremely exhaustive but it saved me approximately 30-60 minutes. At 18:00 I had secured the case underground and filled in all the dirt. I then spent around 40 minutes concealing the dig site by transporting branches and leaves from other parts of the forest. After one and a half hours drive I finally reached a gas station. I was quite dehydrated at the time. Needless to say; that was the best coke and hotdog I had consumed in ages…

I realize that I rushed the end process due to the fact that I had underestimated several aspects of “dig site management”. I will not make the same mistake when I’m securing my weapons after the “weapons acquirement phase”. Lesson learned.

August 2010, 1
Phase shift – armor phase to weapons phase; hard drive replaced with new one, and all evidence from former phase purged. I’m preparing for a car trip to Prague to establish a weapons connection for the acquisition of an assault rifle, a Glock, splint grenades and AP ammo (grenades and AP ammo is a bonus). Prague is known for being maybe the most important transit point for illicit drugs and weapons in Europe. I spent a couple of days planning the trip as it takes around 15-17 hours to drive and it involves the car ferry from Sweden to Denmark and another ferry from Denmark to Germany. I might just take a car ferry from Oslo to Germany. It will be hard to avoid using my visa during this trip but I will try. My mobile will be turned off during the entire duration and will only be turned on in an emergency. I have researched all relevant information; hostel info for Copenhagen, Berlin and Prague. If I fail to accomplish my objective in Prague my secondary attempt will be in Berlin. If that fails as well I will drive all the way to Serbia. My encounter with the criminal networks in Prague will not go without risk. I will have to try to establish a connection via Taxi drivers, and/or through the clubbing/prostitution scene. I just hope I make it out alive… I will at least avoid all ferries and electronic payments on the return trip and cross the northern border (it has minimal presence of custom officers), just in case I am somehow under surveillance. Better to be safe than sorry etc. When I return and secure the weapons I can finally initiate the “explosive phase”. More on that in another chapter.

August 2010, 2
As the “armor acquirement phase” has been successfully completed it is now time to move on to the “weapons research phase” followed by the “weapons acquirement phase”. I’m planning a road trip to Denmark and Germany as backup targets and Czech Republic as the primary destination with the intention of buying an AK-47 (7.62) and a Glock 17 or 19 (9 mm).I’ve spent the last two to three weeks researching clubs or similar places where medium-scale drug dealers frequent. Drug dealers are the best bet when looking to establish a weapons connection, after all. They, or their suppliers, have functional smuggler routes from other East bloc countries, the Balkans and from Turkey. While they prefer to trade drugs, due to the space efficient nature of narcotics, they are usually able to provide weapons as well. If they don’t have any weapons in stock, they are usually able to order arms from their couriers.

I can’t say I’m looking forward to this trip. I’ve heard that Prague is the most dangerous capital in Europe with a lot of very brutal and cynical criminals. There is a chance ill get killed down there by some desperate criminal individual. In any case; I’ve prepped by car, hollowed out the back seats of my Hyundai Atos and it should be room for weapons, a few frag grenades and AP ammo. The car is really crap so I hope it won’t break down in the middle of the autobahn. Several people on the Hyundai forum said I would never reach my destination and back in that car, lol. I guess we will see… The reason I chose it in the first place is that it looks like a pensioners car, so it not likely that I will be stopped in customs controls when I smuggle the arms back to Oslo.

Today is the day; I’m driving down to the ferry now. It will take me from Oslo to Kiel, whereas I need to drive approx 9 hours straight to Prague where I have booked a 6 day stay at a relatively cheap hostel. I have usually gone with hotels in the past but they are not great for socializing. Nothing beats a Hostel when it comes to partying and getting to know people etc. This trip is going to be a fascinating experience. I’m just trying not to think too much about what might happen when I approach drug dealers. I’ve decided I want to get most out of the trip so I have made a schedule including visits to all of Prague’s tourist attractions. I will do this during the day time, and go clubbing at night looking for a connection.

I’m been two days in Prague. I’ve sorted a few tasks I wanted to do. One involved professionally printing prospectuses which will serve to strengthen my cover stories in case I get apprehended pre-operation. The prospectus is basically a Mineral Extraction business plan explaining in detail why I would need to create explosives. The cover story involves the manufacturing of explosives without a permit. Everything is specified in the prospectus which should be enough to create a reasonable doubt regarding any potential terror charges, should I ever get caught. I also got several police ID badges and other related insignias professionally printed, paying cash of course. Printing these back in Norway would only result in the clerk notifying the authorities.

So only one thing remains; I need to find my weapons connection within 4 days…! I failed miserably yesterday; I went to two brothels and a couple of clubs. The people I approached got really nervous and thought I was either a cop or completely nuts, lol. I have had to refine my approach pitch. It started off really bad. Whatever you do when trying to establish a gun connection, never be too direct;

Hello there; I want to buy an AK-47, 4 frag grenades, 1 Glock and AP bullets. (Guy will run for the hills before you have completed the last sentence 🙂

This city doesn’t seem dangerous at all btw. I have no idea why that BBC documentary would present such incorrect information. In fact, I feel even safer here than back in Oslo. Probably because there is basically no Muslims living in this country. Most of the criminals here are Christian Gypsies and I have found out that most of them have been basically chased away from the capital, Prague, to other Czech cities. I can understand why the government would want to do this. Prague is like a giant Museum of ancient European historical sites and attracts millions of tourists annually. All the criminals that was here a few years ago was bad for business. I have never seen this many tourists in any other European city; Paris, London and Berlin included. Downtown Prague is packed with thousands and thousands of tourists, even now in September.

Day 5 in Prague. I’m getting desperate. This is the first major setback for me during my operation. I am so disappointed by myself. I realize now that Prague is far from the ideal city when looking to buy arms. Western European capitals are probably a more suitable location to establish a connection as that is the end destination of the arms that come through here. Prague may be a transit point but finding the actual couriers or sellers has proven to be a hard task. Also, I guess I wasn’t motivated enough, considering the fact that I could have just purchased a legal semi automatic rifle and a Glock in Norway. I have approached several shady looking individuals but I would have tried a lot harder if it weren’t for the fact that I could buy guns legally.

I have now decided to abort this sub-mission and rather focus on acquiring the weapons I need legally, back in Norway. Regardless of the outcome of this mission; I have had a great vacation and have experienced most of the historical sites and a lot of amazing architecture. I’ve also partied a lot with the people I met at the hostel. Time to go home…

The trip back was a bore. My Ipod batteries died halfway to Copenhagen. I stayed the night at a hostel and drove from Copenhagen to Oslo the next day.

September 2010
I originally wanted to try establishing a connection with Hells Angels in either Prague, Berlin or Copenhagen. However, I lost my motivation completely during my first few days in Prague. I now have to acquire a semi-automatic rifle and Glock legally. I don’t think the rifle will be a problem, as I have completed the 1 week duration hunter course, and I have had a Benelli Nova Pump-Action shot gun for 7 years without incident. I don’t have a criminal record so there is no reason why the police should reject my application.

I have now sent an application for a Ruger Mini 14 semi-automatic rifle (5.56). It is the most “army like” rifle allowed in Norway, although it is considered a “poor man’s” AR-15. I envy our European American brothers as the gun laws in Europe sucks ass in comparison. However, the EUSSR borders to Turkey and the Middle East so acquiring illegal arms isn’t exactly rocket science providing you are motivated enough. In any case; I would rather have preferred a Ruger Mini 30, but I already own a 7.62 bolt rifle and it is likely that the police wouldn’t grant me a similar caliber. On the application form I stated: “hunting deer”. It would have been tempting to just write the truth; “executing category A and B cultural Marxists/multiculturalist traitors” just to see their reaction 😛

Acquiring a pistol, legally, is more tricky. I have been a member of Oslo Pistol Club for a few years but it is required that you train regularly in order to be eligible. I will have to train more often this winter and ensure I build up a solid track record, which in turn should enable me to get a permit.
I have now changed my hard drive, again, and I’m now going to start the “explosives research phase”. I’ve been looking forward to this phase for a long time.

October-November 2010
I have just completed the “explosives research phase” and have summarized several new chapters for the compendium. My rifle application came through and I have now ordered a 800 Euro silencer specifically created for automatic and semi-automatic rifles. The Ruger Mini 14 costs about 1,400 Euro including a customized trigger job from the gun smith. I will have to buy a new stock with picatinny rails (400 Euro) and 30 bullet factory mags (60 Euro per mag) from a US supplier.

I have now cleared out all of the information (evidence) from the previous phase and changed my hard drive once again. I am now ready to start the chemical acquirement phase…! 🙂

I was at a party yesterday with a few friends from high school. One of them, Trond, who apparently had evolved into a relatively extreme Marxist, often joining ANTIFA (Blitz) demonstrations… We were both into hip hop back then and he had apparently continued down that road. We had some interesting debates that night while drinking… 🙂 Can you believe the hypocrisy of some people? The guy lives in a Norwegian only area in the middle of a Muslim ghetto at Tøyen in Oslo. I asked him; don’t you consider yourself to be a hypocrite considering the fact that you support mass Muslims immigration and at the same time refuse to actually live with them, and instead barricade yourself in a safe Norwegian area? Needless to say, he didn’t have a good answer… I went on about the fact that there is no such thing as a Palestinian. The concept known as Palestine and Palestinians is a Syrian effort to justify Jihad etc (this is a classic and awesome way to infuriate Marxists :-). We managed to push his buttons over and over again without him realizing that we were using him as a supplier for top notch entertainment :-). God, that was actually quite mean but I honestly think he will re-evaluate his Marxist world view after that night.

I’ve now ordered 50 ml, 99% pure liquid nicotine from a Chinese online supplier. 3-4 drops will be injected in hollow point rifle bullets, which will effectively turn it into a lethal chemical weapon. However, I am quite worried about any potential customs related issue as pure nicotine is considered an illegal substance. In a worst case scenario; a customs official will open the package, get a few drops on his skin and die, and I will have a full SWAT team serving me cock sandwiches at my door the next morning… However, I specifically instructed the Chinese supplier to send the package by courier to my company name, with extra wrapping and chemical labeling.

I have now made my first order for one of the chemicals required for my initiator from an online-based Polish supplier. I will have to order another 4-5 different ingredients online before I am done.

Needless to say; this is an extremely vulnerable phase. In fact, it is the most vulnerable phase of them all. If I get through this phase without trouble I will be very close to finalizing my operation. I am somewhat concerned but I have credible cover stories for each individual chemical (with the exception of one) should there be any complication.

It has been decided that the operation will be effectuated in Autumn, 2011. However, I cannot go into factors concerning why, at this point. My current funds are running low, and I have less than 15,000 Euro left with a 30,000 credit backup from my 10 different credit cards. My primary funds should cover all planned expenses without spending any of the credit.

So what do I do when I’m not working? I’m in the middle of another steroid cycle at the moment, training hard to exceed my 92 kg record from July. I’m currently at 90 kg and hope to reach at least 95 kg. Perhaps ill even reach 100 kg before I end the cycle in 4 week’s time! 🙂 I have a more or less perfect body at the moment and I’m as happy as I have ever been. My morale is at an all time high and I’m generally happy with how things are progressing. I may create an ideological Knights Templar Youtube movie this winter. I have some time to invest while I wait for my chemicals to arrive. My sister in Los Angeles invited me to spend Christmas with her, Kevin and my niece Kaia and nephew Tyler. I’m tempted to visit her for the fourth time but I don’t know if my budget will allow it. My sister supports the fundamental principles of the cause but she couldn’t care less about the struggle and politics in general. They are both career cynicisms and only really care about feeding their own egos. I understand that mentality though as I’ve been there myself. Still, such apathy is the root cause of both US and especially Western Europe’s problems.

I’ve been partying occasionally with my friends; Marius, Axel, Peter and a few others, since I came back from Prague. The cover story I used as justification towards everyone I know was that I was promoting my book.

I am happy to see that Axel is finally coming to his senses regarding his views on the Islamization of Europe. And I expect him to use his vote on the only anti-multiculturalist party during the election in a year’s time.

I am currently watching Dexter, the series about that forensic mass murderer. Quite hilarious. I’m also looking forward to watch the new movie-series about Carlos the Jackal (the Marxist-Islamist and Che wannabe scumbag). Hopefully, it will be as good as the Baader Meinhof Complex. I really enjoyed that one. Oh, and I’m also playing Fallout 3 – New Vegas atm after just finishing Bioshock 2. I’m also going to try the new World of Warcraft – Cataclysm when it is released in December. Time to dust off my image…

As for girlfriends; I do get the occasional lead, or the occasional girl making a move, especially now a day as I’m fit like hell and feel great. But I’m trying to avoid relationships as it would only complicate my plans and it may jeopardize my operation. And I don’t feel comfortable manipulating girls any more into one night stands. I am not that person any more. I did screw two girls in Prague though, but that was mainly because it was a realistic chance that I would end up dead during the process of establishing a weapons connection. I won’t make any effort to try to completely justify it though. Human males are imperfect by default as they are plagued by their biological needs. Nevertheless, screwing around outside of marriage is after all a relatively small sin compared to the huge amounts of grace I am about to generate with my martyrdom operation. And it is essential that you do what is required to keep moral and motivation at a high level; especially, just prior to operation critical moments. I have reserved 2000 Euro from my operations budget which I intend to spend on a high quality model escort girl 1 week prior to execution of the mission. I will probably arrange that just before or after I attend my final martyrs mass in Frogner Church. It will contribute to ease my mind as I imagine I will get tense and very nervous. It is easier to face death if you know you are biologically, mentally and spiritually at ease.

I received the 50 ml of 99% pure liquid nicotine shipment from China today. I’m relieved to see that there were no complications whatsoever.

I thought I’d add a little comment about general expenditure during the pre-operational phases. It is essential to maintain a low budget to conserve your limited budget. The importance of this cannot be stressed enough as having sufficient funds for the operation is everything! Approximately 4 years ago, in 2006, just before I started writing this compendium, I decided to move from my apartment in Frogner, one of the most priciest areas in Oslo, home to my mother. She accepted as she knew I would have to conserve my funds while I was writing the compendium. The cost of renting my old apartment was 1,250 Euro. My current accommodation expenditure (food included) is 450 Euro, a sum I transfer to my mother monthly for renting a room and for food. This wouldn’t have worked in my old life, when I was an egotistical career cynic as it would devastate my social image. However, individuals who choose to become a Justiciar Knight cares little about image (the pursuit to project a desirable façade to impress friends and potential mating partners). Sure, some people will think you are a freak for living with your parents at the age of 31 but this is irrelevant for a Justiciar Knight. The only thing that matters is to ensure that you have enough funds and free time to complete the objectives necessary to execute your individual mission. As for keeping secrecy while living with another person; sure, you need many cover stories and you need access to the loft and/or basement storage areas. As long as you ensure that there is no possibility that the person you are living with will find out what you are really working on, living with others shouldn’t pose a big problem until you initiate your manufacturing phase. My armor is dug down in the wilderness somewhere and I will soon dig down another pelican crate with my weapons, once I get them. I have a large Pelican chest in my room where I have secured items that might raise questions. Besides that, everything is on my PC and individual storage pins which I keep stored safe in the attic (they are 3 very small USB pins which are stored inside walls and properly concealed). They contain the required information for each of the coming phases. As soon as I have completed one phase I extract the information for the next phase from my pin, after I destroy my old hard drive. This has worked flawlessly so far. However, when I will start the actual manufacturing phase in a few months time, I will have no choice but to rent a cottage and/or small farm as I will require total anonymity while manufacturing and storing tons of materials.

I will not be able to update this log for a couple of months as I have to purge my old hard drive and store this information on a chip, externally. When this is done I will initiate the most critical of all phases; the “chemicals acquisition phase”. If I succeed with this phase I will have everything needed except the AN.

December, January and February 2011
When initiating the “chemical acquirement phase”, in end November/early December, I must admit I was filled with some angst. This was after all a critical phase, perhaps the most dangerous of all phases. If I messed this phase up, by being flagged, reported to the authorities etc. I would be neutralized before I could finalize my operation. Even when taking all possible precautions; I estimate it is a 30% chance of being reported to the system protectors at the national intelligence agency during this phase.

My concerns and angst relating to this phase impacted my motivation, to a point where I had to initiate specific counter-measures to reverse the loss of morale and motivation. I decided that the correct approach to reversing it was to initiate another DBOL steroid cycle and intensify my strength training. I also spent some time locating and downloading some new inspirational music. A lot of new vocal trance tracks and some inspirational music by Helene Bøksle. In addition; I decided I would allow myself to play the newly launched expansion: World of Warcraft – Cataclysm. The combination of these three counter measures, in addition to my 3 weekly indoctrination/ meditation walks, resulted in my morale and motivation again peaking.

I would now initiate the most critical of all phases; the “chemical acquirement phase” I will include a list of some of the items/components acquired during this period:

Continuation December log
As already mentioned; I initiated a second steroid test cycle: 3 first weeks on DBOL tabs (40 mg per day). Weight increased from 86 kg to 90 kg. No side effects. Cycle cancelled after three weeks because I felt I had to prioritize other tasks.

Pistol training November, December and January
Pistol training was initiated in order to fulfill the government requirement for purchase. 15 training sessions in November, December and January was completed and documented. The application for a Glock 17 was sent in mid January. Documentation and activity requirement was met. I joined my local pistol club back in 2005 for the first time but have only sporadically attended training until November 2010. The fact that I joined the club as early as 2005 was a planned move to increase my chances for obtaining a Glock, legally.

Rifle training December and January
3 rifle training sessions was completed during this period. The intention was to acquire a minimum of experience with, Gungnir, my semi automatic Ruger Mini 14, .223 caliber and to calibrate my Eotech sights properly at 100 meter distance.

December and January –
Rifle/gun accessories purchased –
10 x 30 round magazines –
.223 cal at 34 USD per mag. Had to buy through a smaller US supplier (who again ordered from other suppliers) as most suppliers have export limitations. An alternative supplier was located in Sweden but it would have cost 1.5 times more. Another possibility would have been to use Jetcarrier (or similar freight forwarder which allows you to order from a US address) but some companies have no- sale policies to New Jersey for this reason. Total cost: 550 USD

From Midway
– GG&G Picatinny Style Scope Base Ruger Mini-14, Ranch only: 95 Euro

– Aimshot Laser Sight and Flashlight Tri-Rail Barrel Mount: 30 Euro (3x picatinny/weaver rail)

– Allen Buttstock Shotshell Ammunition Carrier, 5 round Nylon (mounted on shotgun): 10 euro

– Loctite Blue Aluminum Threadlocker, cost 10 USD on Ebay, excellent for tightening screws on the alu rails used for fastening the holographic sight and 3 x sight.

From other suppliers
– LaserLyte Pistol Bayonet Quick Detachable – a picatinny/weaver rail bayonet purchased from Ebay using VISA/Paypal, cost: 62 USD.

– 4 x 30 round magazines for Glock 9mm from a national supplier, Capsicum Solutions, using VISA, cost: 230 Euro.

– Cammenga Easyloader for AR15/Mini14 from a national supplier, Capsicum solutions, cost: 70 Euro

– Hollow point ammo for .223 from a national supplier, 500 Euro. Had to research and use a cover when buying; bird hunting ftw.

– Slugs ammo for shotgun, 100 Euro, cover when buying; deer hunting ammo.

Equipment needed for creating chemical/biological ammo-

DREMEL Universal tool 200 series (the drill) –

DREMEL Workstation (used for stabilizing the drill in a stable 90 degree position) –

DREMEL Multichuck (allows you to use conventional drill bits on your dremel tool)
Total cost for these three items: 140 Euro from Pixmania.com

– 65mm Drill Press Vice (Quick Release) from Lathe Mill, ordered from Ebay via Paypal, cost: 33 USD (Anchortools.com). This item will hold the cartridge in place while I drill a portion of the lead core out of the bullet.

Note; I have concluded that .223 ammo is not suitable for creating bio rounds. The bullet simply lacks the size required to fit a deadly doze. 7.62 ammo would be preferable as it is more than double the size. 9 mm bullets are ok for this purpose, but I have to wait for my Glock license before I get access to 9 mm ammunition.

Other items bought from Clas Ohlson, general store:

– Manual filing set – Super glue, used for plugging the bullet after injection – De-isolation thong that lets you cut of the tip of bullets (looks like a wirecutter)

Other items ordered:

Marketing related
Casio EXZ 330 SR digital camera, for marketing purposes, from Expert, cost: 80 Euro. This would allow me to complete a photo session, without the need to use a professional photographer. I have used a professional in the past but it is obvious that the regalia I intend to use in the photo session will generate suspicion and threaten the security of the operation. Lack of professional digital equipment, green sheet background and other related and expensive photo gear can be compensated by my Photoshop skills.

Operational gear, components and accessories

– Latex tubing/surgical tubing 10” 1?4 1/32 wall latex tubing from Ebay 50 USD, used as the outer layer on a fuse to prevent early detonation.

– Ruger Mini 14 from national supplier, cost: 1100 Euro

– Trigger job on Ruger Mini 14, 100 Euro (bought in October I believe), to make the trigger lighter to press for rapid fire,

– Training ammo: 200 Euro – Barley Crusher MaltMill with 7 kg hopper, from barleycrusher.com, cost 250 USD incl shipping.

Received the Barley Crusher in January. I haven’t yet tested if it works but according to my calculation it should enable me pulverize fertilizer prills at record speed. When you attach a drill using a 3/8 drill motor at 500 RPM it should give you a crush rate of 3 kg per minute making the pulverization process of 2 tons of fertilizer fast and easy. The crusher rollers are adjustable at both ends so they can be adjusted according to prill size to ensure proper pulverization.

Fitness/muscle supplements

– 100% Whey Protein 9kg, cost: 250 Euro, for increasing muscle mass, 100 g per day in combination with training, top ranked protein supplement, short protein

– 100% Casein Protein 2 kg, cost: 70 Euro, for increasing muscle mass, 25 g per day before you go to bed in combination with training, top ranked protein supplement, long protein

– No-Xplode, cost: 50 Euro, pre-workout energy booster, this should also be used 10 min prior to mission

– Milk Thistle Herbal Supplement , 3 boxes, cost: 45 USD, Ebay, needed to strengthen the liver when using steroid tabs (Winstrol/DBOL). As steroid tabs are toxic for your liver you should use this liver supplement (3 tabs per day during a steroid cycle).

Logistic failures
I ordered an ASE Utra CQB-QM silencer (cost was 800 Euro) for my semi automatic rifle in September 2010 and the supplier, Intersport Bogstadveien, told me it would arrive in early January 2011. In January, the supplier told me ASE had suddenly cancelled all private orders due to the fact that they had just received a large military order… I’m not going to take the chance with a regular non-auto silencer because it might overheat and explode during rapid fire, with the risk of destroying Gungnir. I was not able to find another supplier of semi automatic silencers that could be sent to my country directly from the supplier or by jetcarrier. The only bonus I guess is that by eliminating the silencer aspect allows me to order and equip a bayonet instead. So I guess; “Marxist on a stick” will soon become an exclusive Knights Templar Europe trademark :D.

February
Initiated third steroid test cycle: 3 first weeks on winstrol tabs (40 mg per day) followed by 3 weeks of DBOL tabs (40 mg per day). Weight increased from 86 kg to 93 kg. No side effects. Cycle completed with great success. I have never in my life been more physically fit than I am today. Strength increased by 30-50% which will prove useful.

Creation of marketing movie trailer
Feb 15th to Feb 26th: created a 12.5 minute movie trailer (slideshow trailer) promoting the compendium: “2083 – A European Declaration of Independence”. All the slides were created in Photoshop. After 12 days of hard work I can say I am somewhat satisfied with the end result. I would love to make it even better but I really can’t afford to invest any more time into this trailer which might never see the light of day… Not happy with end resolution but higher res would just make the AVI file too large for efficient distribution. Was planning to hire a low cost Asian movie guy through scriptlance.com but I have to conserve my funds.

Other social related matters
After 5 years in the Freemasons I was finally accepted for rank 4-5 (it’s a combined rank). However, due to lack of time I decided to decline the offer. I told them I would be unavailable until Autumn 2011, due to extensive traveling.

Purchase of containers – primary, secondary and tertiary

To calculate the required size for cylinders (for primary, secondary, tertiary charge housings)

Google for an online Density Mass & Volume Calculator, like the following:
http://www.1728.com/density.htm

Mass: 12 gram (DDNP detonator content) You now need to find the volume and density Density: example density of water is 915 kg/m3 so density of the primer is approximately 700 Now, with the density and mass (700, 12) you can now calculate the volume

To calculate cylinder volume:
http://www.online-calculators.co.uk/volumetric/cylindervolume.php

With these calculations you now know the size of cylinder required for 12 gram primary, 500g secondary and 50 kg tertiary charge.

Cylinder housings purchased
Primary container (small, fits 12-20 grams) I bought the primary containers (detonator housing) from a general supply store. It was actually a long alu pipe which I intend to cut into three detonator housings. I also bought screws so that I may create lockable “ends” by using appropriate sized coins (placing two screws above and two below the coin. I was uncertain whether to select alu, copper or steel for the primary container but eventually decided to go with alu. Cost: 50 Euro Size: 10 x 1,6 cm (12g)

Secondary container (medium, fits 500-800 grams) I bought the secondary container (x 3) from IKEA, a metal toilet brush housing, the most expensive and robust alternative they had. I had reviewed various suppliers prior to concluding this transaction. Cost: 80 Euro. Size: 30 x 7 cm (692g), alternatively: 30 x 6,5 cm (597g)

Tertiary container (large, fits 50-60 kg) Ordered 3 x 61L barrels with a removable end cap(tertiary container) from a national supplier (Greif). Due to a minimum quantity policy I was allowed to leech on a main order placed by another company. After 3 weeks the order was ready for pickup. Cost: 90 Euro Size: 60 x 30 cm (52,8kg), alternatively: 75 x 45 (71,57 kg)

Fertilizer PP woven bags purchased
I was unable to find a supplier of this product in my country. I therefore ordered 60 units of large plastic bags able to contain 50 kg content (woven polypropylene, waterproof and robust fertilizer type bags, excellent for storage and transportation of chems). Chinese supplier found through Alibaba.com, cost: 50 USD for bags + 290 USD for EMS shipping courier. Paid by Western Union.

Cover story; I contacted 30 companies, a majority of them located in China and explained that I was planning to order 200 000 units per year with intent for distribution in Scandinavia. In this context I wanted to order 60 units for testing.

I don’t like lying, but I know from experience that you need a story like this if you want to prevent being ignored. These companies usually just ignore small purchases/inquiries.

I received the 60 units shortly after and they are optimal for their intended use.

Social life and continuation of cover
My best friends; Peter, 31, Marius, 31, Axel, 32, and Martin, 32, are now all in the process of settling down. Peter’s girlfriend Pia has a daughter, Mina, from another relationship. They are about to buy an apartment together. He’s currently in the process of selling his apartment close to Bogstadveien (not far from where I used to live), probably the best and most exclusive place to live as a bachelor in Oslo. Peter works as a co-captain on a supply ship outside the coast of southern US. He works 4 weeks on, and then has 4 weeks off etc. Although he and his parents fled from Soviet Hungary, they are unwilling to condemn the current cultural Marxist regime in Norway, possibly because they feel gratitude to the regime for welcoming them in the past. Peter loves to discuss politics but he’s not willing to take a clear stand on multiculturalism, possibly because he fears a future regime change, in our favor, may jeopardize his legal status. I have tried to convince him that it will not affect Christian Europeans, but he remains somewhat unconvinced. Regardless, he’s my closest friend and has been since I was 19. I have influenced him considerably the last few years, and vice versa, but I don’t consider him to be a fellow nationalist, as he doesn’t really care about anyone except the interests of himself, his family and his friends. This code, or rather lack of code, applies to the large majority of people though, so I don’t hold it against him.

Marius lives only 5 minutes away from my home. He’s been dating a very cute and nice girl named Christine for a couple of years now. She wants to settle down but he’s trying to delay it for as long as possible. He works as a fireman, quite ironic as I will soon ensure he gets his hands full… He has helped me out with my training regime as he is a die-hard fitness/bodybuilding person who has kept a very strict diet for several years. He’s a good friend (we’ve been “on-off” best friends since we were 11 years old – 21 years now)) and I often drop by his house. I guess Marius is the least ambitious of our group as he has traditionally focused all his energy on optimizing his physical and social image in relation to fitness for the purpose of hooking up with as many new girls as humanly possible, often at the same time. I think he has been with close to 1K atm including a Swedish midget :D. When it comes to partying, he’s a demi-god and I guess I can call him a master at what he does. His whole lifestyle revolves around having an optimal bad boy Playboy’ish image which includes multiple tattoos, perfectly toned muscles and endless partying etc. That lifestyle appeals’ to a lot of guys but few get to live it so fully. From my own experience, such a lifestyle does get very repetitive after a while though and you eventually just feel lonely and empty inside as everyone except yourself settles down. Regardless, he’s a great standup guy, and very fun to be around. Just ensure that you keep him at a miles distance away from your girlfriend when he’s drunk and it’s no problem at all :))

Axel works as a contract lawyer in the Norwegian Defense Department, quite ironically, with the acquisition of military equipment on behalf of the military forces pledged to defend the multiculturalist Kingdom of Norway. He’s currently the most career oriented of my friends. He and his girlfriend Synne has just purchased a new 650 000 Euro apartment. Everyone expects her to get pregnant soon as she is 35, he being 32. Axel is a really standup guy and is considerably more interested in high culture and discussing politics in general. Despite of the fact that he knows everything about the current Islamisation process and the indirect genocide of Europeans, he still says he supports “Venstre” (a multiculturalist party known for harsh demonization and vilification of cultural conservatives) but I now suspect he’s just saying that to tease me :))

Martin works for one of the more prestigious real estate brokers/developers in Oslo, Selvaag, and has just moved to Drammen with his girlfriend where they bought a house together, not long ago. She’s only 22 but has a son from another relationship. I haven’t seen Martin much the last few years as he has focused most of his energy on career advancement and his girlfriend.

Me, Peter, Marius and Axel (and a few other common friends) have seen a lot more of each other the last few months as I’ve had the opportunity to take some time off from the project. Traditionally, I have been the “glue/social administrator” of the gang, but in my absence, Peter has stepped up and has taken initiatives the last years. I still enjoy considerable respect and admiration from them in relation to my past achievements (establishing my company with 7 employees and making my first million at 24 and 4 million at 25-26). I believe, less than 5 self made individuals have accomplished more at that young age in my country. However, they just can’t comprehend why I halted my career at that point, which is understandable. It’s not like I can tell them that the only reason I generated those funds in the first place was to fund my current operation…

They, along with my sister Elisabeth, are constantly bugging me about getting a girlfriend as I’m the only one who is still single. I told them I will be dating again from August 2011, as I told them I will be moving to my own place then. I guess it’s the easiest way to avoid the social pressure. I also told them that I’m in the end phase of completing the research phase of 4 different business plans, one of which, I said, I will initiate from August. I’ve told them that one plan involves farming, one involves the design, creation and distribution of body armour with intent to become a supplier for the Norwegian Defense Department, one involves distribution of survival, gun accessories and other security related gear and I have also made hints about the mining project. Controlled distribution of information regarding these projects will potentially help me in the future, should one of them ever manage to stumble across sensitive information. Up until now, there has been absolutely no suspicion from them whatsoever as far as I can tell. I also told them that I’m in the end phase of my book project, which will be concluded by a final publishing tour visiting cultural conservative organizations in Western Europe followed by email distribution to 10 000 cultural conservatives around the European world.

I’ve also scheduled to meet my stepmom, Tove Øvermo, in March. She used to work as a director in Norwegian UDI (the foremost government organization tasked with approving applications and granting foreigners (mostly Muslims) legal permits). Ironically, UDI is a highly valued target for Knights Templar in Norway as it is an essential tool and facilitator for the Norwegian multiculturalist regime. However, I think she’s retired now, so she is currently not in danger of any KT attacks. Although I care for her a great deal, I wouldn’t hold it against the KT if she was executed during an attack against UDI, as she used to be a primary tool and category B traitor for the multiculturalist regime of Norway, high treason she should be familiar with. Tove, being very intelligent and committed in the advancement of her own career under the multiculturalist regime, is fully aware that she is a willing and participating subject/tool for the Multiculturalist Alliance in the indirect genocide of Norwegians through the continued Islamisation of Norway. People in her position are just unwilling to make any meaningful sacrifices as her career would be immediately terminated by the regime if she criticized them. Career termination followed by blacklisting and harsh vilification and character assassination is not a price most people of her position are willing to pay. Just like essential NS tools were guilty of facilitating the NSDAP, people in her position are guilty of facilitating the Multiculturalist Alliance. Regime sub-leaders such as her are on auto pilot though, and partly disconnected from reality and thus partly unaware of their own war crimes, since the multiculturalist media is ensuring that the public remain disconnected from reality and the truth. So when I meet her I will probably just end up talking about the usual social BS, to prevent raising any red flags. During our last meeting, I remember we discussed the central aspects of Wahhabism, and I was really impressed with her knowledge on the matter.

I have been storing three bottles of Château Kirwan 1979 (French red wine) which I purchased at an auction 10 years ago with the intention of enjoying them at a very special occasion. Considering the fact that my martyrdom operation draws ever closer I decided to bring one to enjoy with my extended family at our annual Christmas party in December. I brought the other flask to Marius` party a few days later and shared it with my friends. It was an absolutely exquisite experience that will not be forgotten. My thought was to save the last flask for my last martyrdom celebration and enjoy it with the two high class model whores I intend to rent prior to the mission. My interpretation of being a “Perfect Knight” does not and should not include celibacy, although some of my KT peers might disagree with me on this point. I believe that in order to strengthen the resolve, morale and motivation prior to a martyrdom operation, the Justiciar Knight should be encouraged to embrace and take advantage of a significant reward system designed to increase focus and remove any last doubts. A pragmatic approach, which involves acknowledging the primal aspects of man for the purpose of preparing him for a martyrdom operation, should always take precedence over misguided piety, which only increases the chance of jeopardizing the execution of the operation. And I believe the majority of war strategy analysts will agree with me on this.

Continued philosophizing about the future cultural conservative political model, when we, the cultural conservatives, again seize political and military power at one point between 2025-2083

I have been thinking about my post-operational situation, in case I survive a successful mission and live to stand a multiculturalist trial. When I wake up at the hospital, after surviving the gunshot wounds inflicted on me, I realize at least for me personally, I will be waking up to a world of shit, a living nightmare. Not only will all my friends and family detest me and call me a monster; the united global multiculturalist media will have their hands full figuring out multiple ways to character assassinate, vilify and demonize. They will possibly do everything they can to distort the truth about me, KT and our true objectives, and attempt to make even revolutionary conservatives detest me. They will label me as a racist, fascist, Nazi-monster as they usually do with everyone who opposes multiculturalism/cultural Marxism. However, since I manifest their worst nightmare (systematical and organized executions of multiculturalist traitors), they will probably just give me the full propaganda rape package and propagate the following accusations: pedophile, engaged in incest activities, homosexual, psycho, ADHD, thief, non-educated, inbred, maniac, insane, monster etc. I will be labeled as the biggest (Nazi-)monster ever witnessed since WW2.

I have an extremely strong psyche (stronger than anyone I have ever known) but I am seriously contemplating that it is perhaps biologically impossible to survive the mental, perhaps coupled with physical torture, I will be facing without completely breaking down on a psychological level. I guess I will have to wait and find out.

Regardless of the above cultural Marxist propaganda; I will always know that I am perhaps the biggest champion of cultural conservatism, Europe has ever witnessed since 1950. I am one of many destroyers of cultural Marxism and as such; a hero of Europe, a savior of our people and of European Christendom – by default. A perfect example which should be copied, applauded and celebrated. The Perfect Knight I have always strived to be. A Justiciar Knight is a destroyer of multiculturalism, and as such; a destroyer of evil and a bringer of light. I will know that I did everything I could to stop and reverse the European cultural and demographical genocide and end and reverse the Islamization of Europe.

I guess it is tempting for the many who have endured years of vilification, to just start believing the propaganda and embrace NS fully. However, I remain a staunch anti-Nazi and I blame NSDAP for the situation we are in. Hadn’t it been for the actions of the cultural right wing extremists known as the NSDAP our Western European countries would not be dominated by the cultural Marxist extremist regimes we witness today. If the NSDAP had been isolationistic instead of imperialistic(expansionist) and just deported the Jews (to a liberated and Muslim free Zion) instead of massacring them, the anti-European hate ideology known as multiculturalism would have never been institutionalized in Western Europe, because the Marxists would never have been so radicalized to begin with. The cultural conservatives would have been in a very strong and dominant situation today. Western European countries would have had cultural conservative doctrines similar to what we see in Japan and South Korea.

We must keep this lesson in mind. When we seize political and military power in the future; while tempting to unleash hell to avenge all our ravaged and dead brothers and sisters, we must keep in mind that replacing a cultural Marxist extremist regime with a cultural conservative extremist regime will only fail to break the cycle where history always repeats itself. So instead of replacing this tyrannical and extremist multiculturalist regime with an equivalent right wing one, we must think and act pragmatically with a long term objective. We must manage to break the historical “Marxist vs. Conservative” cycle or we risk that the cultural Marxists will emerge as a dominating force again after 20-100 years. As such, we should limit the executions of category A and B traitors to 200 000 in Western Europe. A better alternative than execution of the remaining, the category C traitors, would be to establish a large multiculturalist zone in southern/eastern Europe, perhaps Anatolia, or on other territories which has been invaded and occupied by Muslims. In these newly created zones; the cultural Marxists category C traitors and those of the non-Europeans considered as politically disloyal will be deported to and allowed to live and create their imaginary utopia. A cultural Marxist or a so called “internationalist” does not feel much love for his ancestral country as he believes we are all citizens in a global community. So they should recover easily from the process of being deported to another country.

Norwegian Intelligence Agency (PST) annual estimates – 2011
Feb 28th: The Norwegian Intelligence Agency (PST) just released its annual report on terror estimates in Norway. I have been waiting for this report for several weeks now. Apparently, it’s the same expectations as usual when it comes to Islamic terror; imminent danger. However, they then specify that the largest right wing threat in Norway is that a subsidiary of English Defense League (EDL); Norwegian Defense League (NDL) is in the process of gaining strength. They also state, between the lines, that both EDL and the NDL are dangerous and violent right wing extremists that adhere to racism, fascism and Nazism.

They conclude that they will ensure that any attempt to further develop NDL in Norway will be harshly suppressed.

I am not surprised that PST makes statements like this as the report has been designed by the Norwegian Labour Party, and does not reflect the views of actual PST operatives. The head of PST, Janne Kristiansen has never even worked as an intelligence officer, and is nothing more than a planted Labour Party agent, placed to lead the PST, against the will of most PST employees.

I know that the above description is nothing more than vile lies, a part of their psychological propaganda warfare against all cultural conservatives. I know this for a fact as I used to have more than 600 EDL members as Facebook friends and have spoken with tens of EDL members and leaders. In fact; I was one of the individuals who supplied them with processed ideological material (including rhetorical strategies) in the very beginning. The EDL are in fact anti-racist, anti-fascist and anti-Nazi. They even have many members and leaders with non-European background (African and Asian). They have worked so hard, and continue to work hard, to keep National Socialists out of the organization, but yet they are strategically labeled as racist-fascist-Nazi-monsters by the multiculturalist authorities. The EDL, although having noble intentions are in fact dangerously naïve. EDL and KT principles can never be reconciled as we are miles apart ideologically AND organizationally. The EDL even rejects taking a stand against multiculturalism which proves that they are even more naïve than Sarkozy, Merkel and Cameron who have all admitted that multiculturalism has been a failure and a disaster for Europe.

KT was formed back in 2002 as a revolutionary conservative movement because we had lost hope that the democratic framework can solve Europe’s current problems. The EDL, on the other hand, IS a democratic movement. They STILL believe that the democratic system can solve Britain’s problems… This is why the EDL harshly condemns any and all revolutionary conservative movements that employ terror as a tool, such as the KT. And this is why, we, the KT view the EDL as naïve fools, wasting all their energy monkey- screaming to deaf ears while they should instead have focused on means and methods that are meaningful in regards to achieving true political change, in regards to tearing down the multiculturalist regime known as Britain. Unfortunately, the only meaningful resistance at this point in time is to use military force. So instead of monkey-screaming, they should instead focus on strategically demolishing one of the many British nuclear power plants, which effectively would completely cripple the British economy, contributing to creating an optimal climate for significant political change.

Regardless; it is so obvious that the Multiculturalist Alliance feels it is important to label anyone who criticizes multiculturalism as racist, fascist, Nazi-monsters. It makes their job easier, as they can justify harsh suppression methods of all cultural conservatives. The truth of the matter is that the Multiculturalist Alliance and their tools are about to lose this propaganda war. The peoples of Western Europe are not stupid, and they know that less than half of the targets of character assassination are not what is claimed. I’m optimistic about the fact that the MA appears to have managed to paint themselves into a corner, and their false and desperate propaganda outbursts appears, for an increasing number of Europeans, to be stuck on auto pilot (similar to what was witnessed in the Soviet Union in the 70s and 80s). People are in the process of learning the truth about what is going on and the continued desperate propaganda outbursts only makes our job easier. It is not the cultural conservatives of Europe that are the monsters. It is in fact the Multiculturalist Alliance that are the true racist, fascist, Nazi-monsters. It is possible to avoid reality for up to several decades. The Soviet Union is proof of this. But eventually, the truth will be known as you cannot avoid the consequences of avoiding reality.

It is no longer a question IF the MA will crumble but WHEN the MA will crumble. They will lose when the Western European economy shatters, in combination with further Islamic colonization. And when this happens; the majority of the 340 000+ nationalist militants in Western Europe must be ready to strike hard and without mercy with the objective of seizing political and military power. We still have 14 years (2025) to arm ourselves, so let us continue to prepare for the coming coup d’état. Guns and ammo alone is not enough, you will need quality body armor, com/radio devices, rations and certain survival accessories as well. Chop-chop<3 For those of you who does not want to wait this long, should immediately ordinate yourself as a Justiciar Knight for the KT. Economic status (as of March 1st)
I decided to sell my dear Breitling Crosswind and my Montblanc Meisterstück pen in January in order to strengthen my operational budget. I was able to sell my Crosswind for 1800 Euro and my pen for 200 Euro.

My remaining budget is now:
In bank: 3750 Euro In cash: 3750 Euro Value of car: 4500 Euro Credit (9 credit cards): 28 750 Euro

Logistical plans ahead (as of March 1st)
I will shortly convert the public listing/definition of my company from regular to agricultural. This will allow me to acquire (rent) and register a farm with accompanying fields. The fields, registered through my company, will give me a specific “farming ID number” which is a requirement for ordering large amounts of fertilizer from the national supplier.

The cover I am using is; test production of sugar beet. I have created a 10 page “business plan” for this purpose, and have familiarized myself with the related terminology. As such, I am soon ready to place “rent adds” in agricultural newspapers, with intent to rent the farm/fields.

As soon as I rent the farm; I plan to move all my equipment to the farm house and initiate the “explosive manufacturing phase”. The operation will be executed shortly after the manufacturing phase is completed. Will attempt to initiate contact with cell 8b and 8c in late March.

Remaining items/components to buy:

• Plastic sheeting: 30 Euro

• Alu/wood ramp for loading/unloading truck: 30 Euro

• Fertilizer – large 500 kg bag: 1 x CAN, 1 x N34, 1 x 0-5-17 (for show), repeat after a couple of weeks: 2000 Euro

• Sementmixer – rent or buy: 100 Euro

• Ethanol 96%, x 6L: 30 Euro

• Blue Police – flashing LED light – for one of the trucks: 150 Euro

• Face – splash proof face mask: 30 Euro

• Fork jack – for 600 kg sacks: 200 Euro

• Plastic base for 600 kg sacks (used with above): 200 Euro

• Refrigerator: 100 Euro)

• Freezer: 100 Euro)

• Fume hood: 1,000 Euro, not yet decided

• Microballoons, 20 kg

• Glock 17: 700 Euro

• More ammo: 1,000 Euro

• Dunnage air-bag for transport load securing (centerload.com), bought from Ebay: 100 Euro

• Straps/net for securing large load in truck, may use alu/metal profiles with screws to support

Manufacturing of Picric Acid/DDNP
Foreword – why the manufacturing of picric acid as a secondary/booster and DDNP as a primary is the most rational approach:

As of 2011; the most popular primary explosive seems to be AP also referred to as Satan’s Mother. AP, although quite easy to manufacture, is an EXTREMELY dangerous substance which is likely to cause you great injury or even death. In the guides I have read about DDNP it is stated that this primary is very often disregarded since it is so difficult to make. This is deliberate misinformation as it is simply incorrect (If a chemistry amateur like myself can make Picric Acid AND DDNP on the first try then ANYONE can make it!!!). After merging 4 DDNP guides, I – who has no chemistry experience whatsoever, managed to synthesize DDNP on the first try. I tested the batch, and I confirmed the result myself. I even managed to create the first batch of DDNP with relatively impure picric acid. DDNP is more than 10 times as stable as AP and has more or less equal VOD (velocity of detonation). I even think that synthesizing DDNP was easier than manufacturing picric acid (which is considered to be perhaps the easiest secondary/booster to manufacture). In other words, the only reason you would not want to create DDNP as a primary is because you for some reason can’t get access to the materials required. So let’s review these materials and some of the equipment needed;

The following should be easy to acquire unless you’re called Abdullah Rashid Muhammad…:

Generic lab glassware
(EASILY OBTAINABLE): beakers, conical flasks, glass temperature rods etc.

Fume hood and fan
(EASILY OBTAINABLE): fume hood can easily be purchased or created using improvisation by using PVC plastic plates, screws, duct tape etc. You can use a 100 euro dust blower as a fan (I did and it worked perfectly).

Sulfuric acid
(EASILY OBTAINABLE): PA and DDNP – if you are having trouble buying this in bulk containers then simply buy 15 car batteries (new or used) which should contain approximately 2L of 28-37% sulfuric acid each. Just drill a hole in it (using protective gear) and pour it in a larger container. If you don’t need 1,5kg of PA booster and just want to create DDNP primary the required amount of sulfuric acid is less than 3L (which is boiled down to 1L of 90%+)!

Acetylsalicylic acid
(EASILY OBTAINABLE): PA – just buy aspirin at any drugstore. There are several brands of Acetylsalicylic acid (aspirin equivalents).

Sodium Nitrate
(MODERATELY OBTAINABLE): PA – you can order this at any drugstore as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria). You can also synthesize sodium nitrate quite easily (as long as you do it outdoors) by using ammonium nitrate (you get this from ice packs) and caustic soda (or was it acetone) if I remember correctly.

Sodium Nitrite
(MODERATELY OBTAINABLE): DDNP – you can order this at many drugstores as it is an essential substance for tanning/preserving meat. Hunters that needs to process hundreds of kilograms of meat before freezing it needs Sodium Nitrate (1 teaspoon for every 25kg of meat to prevent the growth of bacteria).

Sulfur powder
(EASILY OBTAINABLE): DDNP – you can easily acquire this from aquarium filters or by ordering online. It is an essential ingredient in Wiccan culture/religion so they can’t ban it for religious reasons.

Caustic Soda – powdered
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Acetone – liquid
(EASILY OBTAINABLE): DDNP – you can easily buy this over the desk in all countries.

Ethanol (95%)
(EASILY OBTAINABLE): PA – you can easily buy this over the desk in all countries. Just buy concentrated sprinkler fluid (blue) used to clean windshields on cars. There are many names for the appropriate compound: isopropanol and butanol are other names. Go for ethanol or isopropanol if possible. I’m not sure about bio-ethanol sold at gas stations (from pumps) but that may work as well.

Detonator
(EASILY OBTAINABLE): there is no reason to make this more complicated than it has to be… by using mobile phone detonators etc. As DDNP is easily detonated by fuse; just order a few meters of regular visco fuse in December during the fireworks season. There are thousands of pyrotechnic enthusiasts doing this all over Europe and most of the shipments get through with little consequence if detected. Just order from a couple of suppliers so that you will get at least one of the shipments. You can also create your own fuses, in which case; just visit online pyrotechnic forums (every country has at least one) for instructions. When creating the detonator skeleton cylinder you can also add a couple of grams of gunpowder (the flaked gunpowder used in shotgun shells are good) layered above the DDNP in the detonator. For most fuses; 1 cm equals 1 second, so if you want 2 minutes delay just use 120 cm of fuse. Visco fuses are excellent for this purpose but there are even better ones at some sites.

General pyrowares:
much of the above can also be ordered online from pyro-chem sites. The best are located in Eastern Europe since regulations are less tight.

Conclusion:
there is absolutely NO GOOD REASON why anyone (unless flagged by the intelligence agency) shouldn’t be able to acquire the above materials and gear WITHOUT detection. The only thing that is holding you back is unfounded fear or laziness! Your fear for detection cannot be justified, unless you have an Islamic name <3 Ingredients needed for 1,5kg of Picric Acid secondary/booster

1. 10 liters of 90%+ sulfuric acid (requires 2 days of labour, cost: approx 200 euro)

2. 1.6 kg of Acetylsalicylic acid (requires 4 days + 2 days of labour, cost: approx 1500 euro)

3. 3 kg of Sodium Nitrate (pre-ordered at apothecary, 1 week delivery time, cost: approx 500 euro). This can also be synthesized relatively easily if you are having trouble buying it.

4. 80 liters of distilled water/distilled ice cubes (cost: approx 440 euro)

1.
10 liters of 90%+ sulfuric acid

Estimated time required: 1-3 days to purchase the product (28-37%) and it requires 2-3 days of labor to concentrate it to 90%+.

Boiling down 35 liters of un-concentrated sulfuric acid (28-37%) to 10 liters of 90%+ concentration

In order to concentrate sulfuric Acid bought from stores (containing 28-37%) you will have to boil down the liquid. In order to get 10 liters of 90%+ sulfuric acid you need approximately 30 liters containing 28-37%.

I bought a container of 25 liters (28%) from one supplier (supplies car shops etc) and I bought 5 bottles from 3 other retailers each containing 1 liter. I also bought 4 car batteries in case I needed more.

I was uncertain how I should approach the “boiling down process” at first. The guides I had reviewed suggested you use specialty hot-temperature porcelain plates, use of specialty lab beakers, use of cooking stones to prevent sprouting and to use all necessary protection gear. As such; I assumed you needed specialty cooking plates that could reach very high temperatures and that I would need boiling stones and specialty laboratory glassware that could sustain extreme temperatures. Needless to say; the guide was wrong on all accounts! You don’t need any of this to concentrate sulfuric acid! Not hot-temperature porcelain plates (any plates will do), not specialty lab beakers (any regular Duran lab beakers will do) and not boiling stones (I tried with boiling stones and it made it harder).

I initially bought 3 induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I used standard inexpensive lab beakers made from Duran glass btw. I also broke two other beakers made from Duran glass (crushed them to small pieces with a hammer under a towel) in order to use it as boiling stones (to prevent the liquid from sprouting).

As the induction plates didn’t work for me I purchased 2 regular single cooking plates; the more expensive ones with iron plates retailing for 140 euro a piece. I had a very cheap single plate from before. Using the boiling stones was a failure for me so I reduced the amount of stones until I decided to remove them all and try without. I was also unsure how to store the concentrated sulfuric acid once I was done boiling. Some sources said glass was required while other said you needed specialty plastic. This was incorrect, as I stored my 90-95% acid in regular plastic bottles, in both 1 liter bottles (the bottles which were intended for 28% sulfuric acid) and 4 liter bottles (bottles produced for distilled water). I encountered absolutely no problems doing this whatsoever ( I had them in these bottles for up to 6 weeks).

Boiling procedure
I did the boiling outside using a 10 meter electrical extension cord and I placed the cooking plate on a wooden TV rack I had carried outside. I wore a lab coat with apron with standard nitril washing-up gloves and a 3M half mask with 3M acid filter (nr. 60923 – multifilter). Skipping the stones made wonders and it quickly started boiling (set it on the highest temperature from the start). After 1,5 hours of boiling (concentration at about 70-80%) the more or less unnoticeable water damp developed into thick smoke (NOx gas). After around 2 hours of boiling the smoke was so thick I got really worried that my neighbors would notice it so I quickly cut the power. Even after turning it of it generated insane amounts of white smoke (NOx gas) for 20 more minutes. I then decided I had to do the rest during nighttime, not to attract any attention.

That night, I started the next boiling session with 3 boiling plates at around 21:30 since it got dark at 23:00 when the heavy smoke would begin to generate. I started with 1.8L of un-concentrated sulfuric acid in each of my 2 x 2L beakers and 600ml in my 1 x 1L beaker which was used on my “weaker” plate. I worked from 21:30 to 07:00 in the morning for three consecutive days before I finally was done. End note: I tried to extend the working day past 07:00 on day two which almost ended in disaster. At around 09:00 AM, I was about to put on my hazmat suit and 3M gas mask to start another boiling session when I noticed the neighbor just outside the house entrance. Had I not noticed this in time I would have to explain to him why I was wearing the protective gear, and that wouldn’t end well… So if possible, even when on an isolated farm; do the boiling between 23:00-07:00 if possible. No use taking unnecessary risks. I spent 5-6 days on this process considering the fact that I had to combat false information, misconceptions and work out efficient procedures . If I had access to this guide before I started I would have been able to shorten down this process to 2 days.

Additional boiling tips:

a. Consider buying 5 or even 6 single cooking plates to reduce the boiling time drastically. Cutting the boiling time in two will drastically reduce your vulnerability to detection considering the fact that you are forced to work outdoors.

b. You will quickly learn your “progress” (purity level of sulfuric acid) by evaluating the thickness of the smoke and how many ML has been boiled away. If you start at 1.8L of 28% purity just boil it until it reaches 550ml or so to be sure you have 90%+.

c. Unless you are using identical cooking plates you will want to adjust the amount of ML per cooking plate so that you have maximum uptime and so that the concentration reaches 90% on all plates at the exact same time. You will learn this after the first session.

d. Let the acid stand for 30-40 minutes after you cut power to the plates by unplugging the electrical cord extender.

e. You can store 90-95% sulfuric acid in plastic bottles.

f. Concentrated sulfuric acid does not fume or evaporate.

g. You don’t need to go overboard with protection. It will take 10-20 seconds for 90%+ sulfuric acid to burn through regular nitril gloves (medium thickness washing-up-gloves) and several seconds for it to burn through clothing. Just be rested and careful and you’ll be fine. I got several drops on my gloves on several occasions and I just wiped it off with a napkin (napkin quickly turns black) before it could burn through. Avoid the “one-time-use” super thin gloves, even if its nitril. The most important things to wear are regular nitril gloves, an apron and some kind of full face visor. 3M masks are excellent since they prevent fogging on the visor.

2.
1,6 kg of Acetylsalicylic acid

Purifying the aspirin to pure acetylsalicylic acid. All the guides I reviewed, around 8, had flawed or even dysfunctional methods. I had to locate an entirely different method from YouTube which proved to work excellently.

Estimated time required: 4 days to purchase the product in a secure manner (assuming each apothecary has a 2 box cap). You would need to set up an “apothecary route” visiting 20-30 apothecaries in one day, then wait 1-2 weeks for safety and repeat 3 more times the next 4-8 weeks. As soon as you have all the aspirin it will require 10 minutes to pulverize it with a regular stationary or handheld blender and approximately 2 days to synthesize.

Other reagents needed: distilled water, mineral and distilled ice cubes: around 40-50 liters

You will need purified aspirin equivalent to 2.5kg of aspirin tabs/270 boxes of 20 tabs (mostly containing 440mg (producer: Nycomed, brand name: Globoid) but about 1/6th was a different brand containing 500mg tabs (producer: Bayer, brand name: Aspirin). You will be synthesizing 1.6 kg or more of pure acetylsalicylic acid from 2.5 kg of impure aspirin tablets. The reason you need to purify the aspirin is to remove the 17% of so called “fillers”, stark etc. The maximum yield of pure acetylsalicylic acid you can extract from aspirin is 83%, if I remember correctly. I managed to extract aprox 67% (1.68kg out of 2.5kg) which is a good yield. It’s worth noting that all the guides I could locate online were either incorrect or significantly flawed. All the guides I read failed to inform me that if you heat the aspirin to more than 70ºC it will destroy the acetyl and convert it to salicylic acid which is worthless for our purpose.

Of course, I had to learn it the hard way and managed to create a lot of worthless goo… Fortunately, I eventually managed to locate a method that worked optimally and I only ruined the first batch.

a. Grinding the aspirin;
some retarded guides suggested I use a mortar and pestle… Needless to say, after a few hours, my wrists hurt like hell, and I realized this was an extremely poor method for the quantities I was working with. There must be a better way? I ended up experimenting and I found a very nice method. I put out a large plastic sheet on the floor and poured approx 1000 tabs on it, spreading it evenly. I then used a 20kg dumbbell (single hand weight used for weight training) and crushed the tabs with even strokes by using gravity. It took me less than 4 hours to crush all the tabs. In retrospect I realize that using a blender would be even better. Providing you use a blender (I prefer stationary, but I guess handheld works as well) which assures a good and even spread/circulation as you grind them (same principle as when grinding AN prills) it should only take you 10 minutes to grind up 2.5kg of aspirin tabs. It’s worth buying several brands of blenders to find out which offers the best circulation. Basically; only 1 out of 5 blenders offers appropriate circulation. Handheld blenders are probably the exception here since your motion determine the circulation, providing you grind it in an appropriately shaped container. With circulation I mean that as the lower part of the tabs get ground to fine dust, the heavy pieces of the tabs rise to the top until they are “sucked” down the “downward whirling current” – providing optimal grinding. I bought a total of 8 different blenders and only 2 of them worked efficiently for this purpose (at least for AN prill grinding). When completed; you now have 2.5kg of fine aspirin powder.

b. Manufacturing method

• 2.5kg of aspirin powder

• 5L of 95% ethanol (you can use the concentrated blue ethanol used for cleaning the windshield of cars for example, other types of alcohol works as well like isopropanol or butanol)

• Distilled water, distilled ice cubes: 40-50L
You will need 1ml of 95% ethanol for every tablet. This means that for 50g of aspirin (114 tabs x 440mg) you will need 114ml ethanol. Since you have larger quantities of materials you should use higher ratios as an effective way to save time:

I used the following ratios when manufacturing (these ratios are optimal!):

• 1040ml ethanol (I used primarily Isopropanol, 80-95% concentrated blue sprinkler fluid)

• 400g aspirin powder

• 6L distilled ice water

Alcohol note: I believe I used 95% concentrated sprinkler fluid: ethanol-Isopropanol (the liquid used for cleaning car windshields) but it might have been lower grade (80%?). I can’t know for sure since it wasn’t specified on the bottle. I performed a fire test and it burned, that’s all I know… 😛 I also made a batch with butanol (concentrated red spirits used as a fuel for some apparatuses). Since this batch was successful as well, I assume a large range of alcohols will do the job. However, I have read that methanol is not suitable.

1. In a 2L beaker, heat up 1040ml of 95% ethanol on a hot plate stirrer. Drop a spin bar in the beaker and start mixing in 400g of acetylsalicylic acid powder, under stirring, f example as the temperature reaches 50ºC. Very important; keep the heat between 60-70ºC. Do NOT let the heat surpass 70ºC as it will start to break down the acetyl and convert the compound into salicylic acid, which is useless for our purpose! The acetylsalicylic acid should be dissolved within 5-10 minutes if it is powdered, 10 more minutes if it is clumped, and up to 45 minutes if you are using whole tablets.

2. Filter hot, for regular gravity filtration you should use 4-6 funnels with 1-2 coffee filters in each (I used 1 but you should probably use 2) over f example 4-6 x 600ml beakers. Wash the 2L beaker with a small amount of ethanol and pour it through the filter to collect any residues. Then you may wash the filter 1-2 times with a small amount of ethanol to collect any residues. The compound left in the filter will be the aspirin fillers. Discard the filters and its content.

3. As you now have approximately 1.4L of ethanol-acetylsalicylic acid in your 2L beaker; pour 350ml into 4 x 2L beakers.

4. Place the first 2L beaker with hot 350ml of ethanol-acetylsalicylic acid mix into an ice bath. As an ice bath container; you may for example use a regular 10 liter plastic bucket (a 2L beaker fits this type of bucket perfectly with enough space for ice) filled with 0.5 liter of cold spring water and 3-4 plastic-pocket-sheets of distilled ice-cubes. You must use a weight of some sort to keep the 2L beaker submerged in the ice-water mix or it will float to the surface and fail to properly chill. You must now measure out approximately 5 times the volume of your ethanol-acid mix in ice cold distilled water that you cooled earlier. So for 350ml you will need 1750ml of distilled ice-water (very important; ensure that the distilled water is as cold as possible or you will not achieve maximum yield!). Add the ice cold water to the ice cold ethanol mix. This should more or less completely fill up your 2L beaker. The addition of the distilled ice-water will cause the acetylsalicylic acid to precipitate as it is insoluble in ice cold water.

5. Now filter the white slurry by gravity filtration using 6-10 funnels/filters/ 500ml beakers. You will obtain a white slurry-like compound in the filters. Remove the filters and its content, by wrapping them (so that the contents doesn’t fall out) and temporarily store them in a large plastic box. Empty the beakers (just pour the liquid in the sink) and get ready to repeat this process as soon as possible with your 3 other 2L beakers filled with 350ml of hot ethanol-acid mix. Try to complete the batch while the ethanol-acid mix is still hot as it might impact the yield if the hot ethanol-acid mix is allowed to chill to room temperature. I used more than an hour from start until I completed the last beaker and I didn’t notice any difference regarding the end result though.

Note:

• If you follow the above “aggressive” manufacturing method you should be able to complete all the batches (1.68kg total) within one single day of laboring.

• I managed to achieve a 67% yield (1.68 kg out of 2.5kg aspirin) because I was a bit sloppy when chilling the ethanol-acid mix (did not use weight to keep container submerged, and I could probably have chilled the ice water even more). If it hadn’t been for that I would have managed to increase my yield.

• The guide further suggest that you purify the acetylsalicylic acid a second time. I did not purify the acetylsalicylic acid. I do not know how this would impact PA production. Will the picric acid yield achieved be lower or even significantly lower if the acetylsalicylic acid isn’t purified a second time?

• Alternatively; you may use vacuum filtration for speed if you have the equipment.

Source:
http://www.youtube.com/watch?v=xHg1hx7Rf64

This method – further discussed:

Q1: Can you use cheap 70% isopropanol or methanol?

A: The extra water in 70% IPA would reduce the solubility of ASA and increase the amount of water required to precipitate most of the ASA. As for methanol, you have a lower BP and higher vapor pressure to deal with. You have to prevent loss of solvent (round bottom flask + condenser) and deal with the fire hazard (methanol is significantly more flammable, vapors even more so; and the flames in a well lit lab aren’t visible).

A: I used the 70% IPA and it worked fine. Just used a little more distilled water…

A: You don’t want to use too much alcohol otherwise you will dissolve other impurities such as triacetin. The ratio mentioned is the best ratio that has worked for me.

Q2: Is there any way to check if what I got is ASA?

A: An absolute way to test would be using FTIR spectroscopy or NMR spec. which may tell you what else is in the precipitate. If you want to test *only* for the ASA/SA in the precipitate, you could add sodium carbonate (CO2 = positive for ASA or SA), test melting point, etc. The easiest way though would be to add some metal cation that would selectively precipitate the ASA such as Cu+2, Ni+2

c. Gathering and drying
I chose to store wrap up the coffee filters containing the wet acetylsalicylic acid in a large plastic container until I was ready to process it.

I placed the filled filter papers on a super absorbent rag 5 times to get out most of the water. Afterwards I gently squeezed another rag on top of the papers absorbing even more liquid. I then used a plastic board, opened the seaming on the coffee filters and flattened them out like a pancake scraping off the content using a rubber scraper (the item used to evenly distribute cream on cakes is optimal).

After I had scraped out all the acid from the filter papers I spread the substance out evenly on the plastic board and placed the board in a room with an oven set to max. The temperature rose to around 30 degrees in the room. The day after much of the water had evaporated. I then semi ground the acid clumps and again spread it out evenly. After three to four days the acid was completely dry. Note: I’m not sure whether this is optimal way of drying as it takes several days for the acid to dry this way.

It would probably be a better idea to dry the acid in a large glass Pyrex dish in the oven at around 50-70ºC. 1.6kg would be too much for one dish so you would in this case have to divide it into 400g batches. However; I do not know for sure how this will impact acid, which is why I chose the hard way. It is definitely worth testing though as you will save several days drying it in the oven versus my other method.

You now have 1.6kg of acetylsalicylic acid and you have just completed the second most tedious task of PA manufacturing.

3.
Sodium nitrate

Sodium nitrate can be purchased from specialty chem stores, online or at an apothecary. It is commonly used to prevent bacteria growth in meat so many hunters buy it to prepare meat before freezing. Half a teaspoon is mixed with salt and other herbs and rubbed into 25kg of moose meat for example.

Alternatively; you may synthesize sodium nitrate relatively easily. However, I will not add the guide for this manufacturing method here.

4.
Distilled water

Always use distilled water when preparing and manufacturing acetylsalicylic acid and picric acid. You may buy it in car-stores as it is used as battery water. I ended up buying a total of 170L for creating 1.5kg of picric acid.

Practical tips – preparing large quantities of ice cubes: acquire a big freezer where you can store a lot of distilled ice (you fill the plastic “pocket sheets” with distilled water and squeeze the frozen cubes out of the plastic as your need arises). I converted 40-50L of distilled water into ice cubes this way (took me about 10 hours) and I filled up a large freezer for this purpose. You can only prepare smaller batches of ice cubes at a time though as you can only stack 2 layers of plastic ice- cube sheets at a time. Then you will need to wait 30-60 mins for it to freeze or the weight of the water will cause leakage in the lower levels of ice cube sheets. I also prepared ice cubes made from spring water. Just mark the plastic sheets of mineralized water with a large black X, from a permanent marker, on each side, prior to filling, so you know which sheet contains distilled and which contains mineralized water.

Producing Picric Acid
Now that you have prepared 1.6kg of acetylsalicylic acid and 9-10L of 90%+ sulfuric acid you are halfway into manufacturing picric acid.

See guide
I used the following measurement for creating PA. I had a negatively disproportionate amount of sulfuric acid so I used a little more acetylsalicylic acid and sodium nitrate.

In a 1L conical flask I heated 600ml (700 is optimal) of 90%+ sulfuric acid in a 1L conical flask up to 60ºC. I then, over the next 2-4 minutes mixed in 112g of acetylsalicylic acid under stirring (using a hotplate magnetic stirrer). I then turned off the heat as the nitration would ensure enough heating.

I then started the nitration process (adding 190g of sodium nitrate slowly the next 140 minutes. I added 0.3g each 15 seconds for a total of 1.2g per second making sure to keep the temperature between 60-70ºC. I kept the temperature at around 66ºC to be precisely. Keeping the temperature stable at around this heat is essential. After about an hour I had to turn up the stirring power to max as the liquid thickened.

After 140 minutes the solution was fully saturated (even though I had 24g of sodium nitrate left) and it “bloomed”. Blooming is like a reversed melting process in which the solution solidifies and no amount of stirring can stop it. I do not know for sure if this is correct as I have never seen a guide describing it. Regardless, I kept on stirring every 5 minutes for the next 30 minutes, and then every 10 minutes for the next 30 minutes to prevent the increasingly “growing” substance from overflowing. This was one of my “successful” batches which contained approximately 40-50% pure PA crystals. 80% of my batches “bloomed” in this manner. It took around 4-5 hours for the container with the unpurified PA to reach room temperature. The 1L conical flask was 800ml full. At this point, I could continue the process by slowly scraping out 400 ml of semi-clumps of PA into a 2L beaker with 500ml of distilled water and the rest distilled ice cubes (filled up to 1400 ml). After proper precipitation I poured it into 6 x 500ml beakers with the same amount of funnels/filter papers, saving the filtrate and pouring out the liquid into a 100L plastic bucket (which was later to be dumped near a death-sentenced-bush, outside 🙂

Corrections to previous guide based on my own experiences and research while producing 10 batches of unpurified PA. When I first started this production process I assumed I would end up with a relatively pure end product, perhaps 70-80% pure after washing a couple of times. Needless to say; it was significantly more time consuming than I thought and I had to learn the hard way due to significantly lacking and even misleading guides. The positive surprise though, was that handling PA was significantly safer than I thought. I started out as overly careful as regards to PA and metal. Although you have to be careful, know that PA is perhaps the most safe booster you can work with. Unpurified PA isn’t, in most cases, even flammable. So you don’t need an exceptional fume hood and fan. An improvised version will work just as well for this purpose. After I had bought a fume hood I invested in two fans, one cheap version (it was actually just a dust collector suction fan) retailing for 140 euro. I also invested in a much more expensive fan (especially manufactured to prevent explosion) retailing for 950 euro. It would seem I was way too paranoid as the only dangerous gas you ever need to worry about when manufacturing PA or DDNP is the NOx gas during nitration and also H2S and SO2 during DDNP manufacture when acidifying the sodium picramate solution but these gasses aren’t explosive at all. I was somehow worried that the anti-metallic nature of PA would prevent me from using a metallic fan-tube. However, using one is not a problem at all as all the PA remains in the beakers. So don’t worry at all about explosive gasses cause there aren’t any. And you don’t need a hazmat suit either. Just use regular nitril washing-up-gloves and a good 3M face mask with visor and acid filter/vapor gas filter (nr. 60923 – multifilter) and you’re more than fine.

A few guides states: after you mix in the acetylsalicylic acid with the 90%+ pure sulfuric acid, slowly mix in the sodium nitrite. A few guides did not even specify in more detail than this.

1. What many guides failed to mention and which I had to learn the hard way after ruining several batches; it is ESSENTIAL that you do the nitration (mix in the sodium nitrite) between 60-70ºC. I found out that if you mix in the sodium nitrite below 60ºC some of it turns into a layer at the bottom of the conical flask which grows ever thicker. This layer can potentially sabotage and ruin your whole batch. If the temperature suddenly rises this layer may suddenly “melt/loosen” and cause a nitration “overdose” as it mixes with the rest of the content which may increase the temperature with up to 20ºC within minutes and severely deteriorate the yield of the batch. This layer may also affect the magnetic stir bar and cause it to not stir properly. So make sure you prevent this from happening by keeping the temperature around 65ºC and never let it drop below 60ºC.

2. What ALL the guides failed to mention was the fact that the addition of the sodium nitrate increases the temperature of the content. So basically; as you start the nitration just after you add the acetylsalicylic acid at around 50-60ºC, you don’t need any heat at all during the process as you can keep the heat between 60-70ºC by adding sodium nitrite (or potassium nitrate). Rapid heat fluctuations is the most severe threat to your batch and temperatures above 70ºC (not exactly sure about 70ºC perhaps 75ºC) will deteriorate your batch and cause a significantly lower yield. By deteriorating I mean lowering your yield of pure PA crystals from an optimal 50% down to 10% in a worst case scenario.

3. What all except one guide failed to mention was the importance of the glassware you are using. I used 2 x 1L beakers and 1 x 1L conical flask. All of my beaker batches ended up with a very low yield for the following reason; the magnetic stir bar works significantly better in a conical flask. I had problems in the beaker as the stirring was significantly reduces (even at max power) due to the shape of the container and the fact that I had a glass temperature rod which very presence significantly reduced the stirring output created by the stir bar. In any case; use a conical flask instead of a beaker if possible.

4. On my most successful batch I used a 1L conical flask with 600ml of sulfuric acid (90-95%). On average; I added 1.2g of sodium nitrate per minute (for my two most successful batches). Instead of dropping 1.2g in one go each 60 sec, I added aprox 0.3g every 15 sec (in other words 4 times x 0.3g per minute). I sat there for 2 hours and 15 minutes doing that on my most successful batch (with 2 x 5 minute breaks). You can imagine the agony of sitting there with a 3M gas mask on a rotten chair with your back hurting adding 0.3g every 15 sec. Its repetitive, extremely boring and frustrating. You will start to curse the fact that you didn’t set up a TV nearby, or the fact that you only bought one hot plate stirrer instead of three. The prospect of doing this 10 times can be psychologically challenging. So take all measures to make your time more efficient. I managed to barely survive with my sanity intact thanks to my iPod <3 5. Acquire 3 x hot plate stirrers if possible. The nitration process is an extremely tedious and frustrating process. With three hot plate stirrers you can add 0.3g in three separate conical flasks speeding up this bitch of a task 300%. A hot plate stirrer retails for 300-500 euro so its affordable. Also, it's less suspicious to buy 1 than 3 🙂 as three mostly indicates that you are going to resell them <3 6. Creating PA proved to be a very unforgiving manufacturing method. Several things can go wrong, and most of these things relate to impatience -> too much sodium added per minute -> temperature rising to fast f example; I took a break a couple of mins too long and came back to see the thermostat at 59ºC. I tried to compensate with a little extra sodium nitrite, which didn’t seem to have any effect on the temp. I added more and suddenly the temperature exploded and ended at 81ºC. A couple of other times I got too impatient and added too much per minute (although at the time I believed that a temperature above 70ºC wouldn’t make a difference – I eventually learned that it makes all the difference). You need to be rested and focused before you begin this process (I was exhausted on several occasions which made me lose focus a few times and thus ruin the batch). As long as you focus and add the sodium nitrite 2-4 times per minute x 0.2-0.4g you should be fine.

Prepare mentally for the nitration process. Don’t start if you are physically tired or if you need to eat any time soon. Just prepare and if possible have a radio, TV or iPod at your disposal.

7. Don’t assume that the precipitate you end up with will be above 60% purity. Consider the precipitate you end up with grapes, whereas the actual pure PA crystals are the seeds in the grapes. If you do the process flawlessly the seeds will be large, but if you make mistakes, they will be significantly smaller. This will save you the disappointment I encountered:-). Out of 1.2kg of unpurified PA substance I ended up with only 200-300g of pure PA crystals. Had I done everything optimally I would have ended up with 1.5kg of unpurified PA substance and perhaps 0.8-1kg of pure PA crystals.

8. You can mix in the acetylsalicylic acid quickly. I never spent more than 5 minutes mixing it in, in the beginning of the process. As soon as you have mixed it in and it has fully dissolved you can start the nitration process. I usually mixed it in at around 60ºC and started the nitration process at around 60-65ºC.

Washing
It says in most guides that you need to wash with ice cold water 2-10 times. Basically, if you want to do this; just pour water over the filter to clean away sulfates. However, as you need to purify your yellow PA substance anyway, it is pointless to wash it! As I didn’t know this at that time I washed the PA-substance 2 times, and the batch intended to create DDNP; 4 times.

How to find out whether your yellow unpurified PA substance is pure

Fire test:
Purified (<80%) PA burns, unpurified PA (>60%) does not! I would imagine it would burn faster and more consistent the purer it is. I tried the fire test on all my batches of un-purified PA substance and none ignited, not even my best batch, even though I heated it until completely dry in the oven. I would therefore assume that you need a certain % of pureness for the substance to ignite – perhaps 50-60%+

Eyesight:
I found this out myself by observation of substance and comparing to the yield achieved by the purification process. The more pure your PA substance is the more it will “sparkle”. It is the pure PA crystals that make it sparkle. Needless to say; the more crystals, the more sparkles. Usually, an optimal produced batch of unpurified PA substance is pale yellow that “sparkles”. It’s worth noting though that one of my pale yellow batches had a very low yield so color isn’t everything and 100g of pale yellow PA substance can in fact prove to yield less than 20% of pure PA crystals.

IMPORTANT: DO NOT assume that your unpurified PA substance is suitable as a high explosive booster! On my test blast I used 3g DDNP with 50g unpurified PA substance as a booster. At this point in time I believed it was potent but wanted to test for sure. Needless to say, the completely dry impure PA substance did not detonate and was just spread all over after the blast. I later (when I purified the rest of the same batch) found out the yield in that batch was a lousy 10%, so no wonder it didn’t detonate.

Purification
Time required: 3-4 days for 1.5kg of unpurified PA substance.

Purification of the yellow unpurified PA substance is required as you need to be sure that the substance is potent. You will need approximately 40-50 liter of distilled water to purify 1kg of unpurified PA substance. You also need a 2L beaker for boiling/mixing and 20-40 other glass containers for chilling the liquid after the boiling/mixing. The chilling process will take up to 1-2 days so unless you have enough time, you should get A LOT of glass containers, to do everything in 1-2 batches.

Boil up 1.3 L of distilled water (70-80ºC) in a 2 L beaker. You don’t need a hotplate-magnetic stirrer for this as a limited amount of stirring is needed. In fact a regular plate would go considerably faster since it heats up faster.

Start to dump in the unpurified yellow PA powder (powdered or clumps – around 50 g, exact weight isn’t important). If the amount doesn’t saturate the liquid you can put more in, until it is no longer soluble and bits of PA floats around. Just ensure everything dissolved before you go to the next step. Have a container of 500 ml additional water nearby and add it once you need to dissolve the insoluble PA. You can regulate the temperature somewhat with adding additional water to ensure the temp doesn’t exceed 80ºC. I don’t know for sure whether temps exceeding 80ºC will deteriorate the PA but I read from another source to keep temp between 70-80ºC so no harm following that advice. It said another place to remove the brown oil droplets. I tried this in the beginning with a plastic spoon but noticed that it impacted the yield of pure PA as I also removed some pure PA floating around with the droplets. I only noticed the brown droplets in my first batch which was very poorly made, but not in the other batches. There will hardly be any so just ignore this altogether.

1 L of liquid is saturated with 15 g of pure PA so this fact allows you to measure the yield of your yellow PA powder and the number of grams you can expect to purify. 50g of yellow PA powder in my case yielded from 10-50% of pure PA crystals. My poorest yield was my first batch. 300 g of PA powder was almost inert and yielded only 30g of pure PA crystals. The other batches of PA powder was a better yield ranging from 15-50%.

When the liquid is saturated (you should have 1.8L of PA liquid), filter hot into glass containers. Filtering hot is not very important unless your PA powder is very unclean, like my batches (it was everything from bugs to other small impurities like pieces of plastic). I filtered 1.8 L into 4 x 500 ml beakers but since I only had 10 of these beakers I eventually started using all types of glassware. Since the crystals (when cooling slowly) “grow” slowly like bacteria I assumed using items which they use to boost bacteria growth would work in these cases as well. I experimented with various glass containers, different shapes and sizes. I used flat, long (long drink glasses), small, with everything from glass rods and plastic sucking straws in.

My findings were not 100% conclusive, in fact I’m still very uncertain, but I got the impression that certain shapes and sizes will allow for a greater yield. Smaller containers seemed better than large containers and adding plastic sucking straws so the crystals got more “surfaces” to grow from was a slight bonus. Beakers larger than 600ml yielded a lower result. I ended up buying 18 long drink glasses (each 300ml) which yielded an ok result. I was surprised to learn that the best yield was from a large circular glass bowl (5 liters) which I placed 1 liter of liquid in. It was an unclean bowl I had previously used to store my bananas in (in a plastic bag). In any case; the yield of pure PA crystals was 100-200% better than in other containers. I do not exactly know why; perhaps it was the dust particles in the bowl or possibly bacteria that promoted the increased growth. In any case; it indicates that the described purification method is flawed and the issue is worth investigating further. For obvious reasons, I don’t have time for more research into this issue. Also keep in mind that larger glass containers uses considerably longer to cool (several extra hours).

Cool the two 600 ml beakers to room temp. For a 500 ml beaker this took 4.5 hours and a few hours extra for the 2L beakers. I notices, however, that when I let the beakers sit overnight (for a total of 12 hours) there was considerably more PA crystals generated. However, I do not know for sure if this will impact the total of crystals generated after you have further cooled it down in the fridge. When the beakers and other glassware you might have used are at room temp (don’t hesitate to let it stand for several extra hours, perhaps up to a day or two, after it has hit room temp) – then, put the beakers in the fridge. It said in another guide that I was to put it in the fridge for one hour but I’m pretty sure he meant that I chill the liquid down to 4ºC. Considering that I was purifying 1kg of unpurified PA powder and I had A LOT of beakers and other glass containers, it took 12 hours in the fridge for the beakers to reach 4ºC (since the room temped containers raised the refrigerator temperature from 4ºC to 12ºC within the first hour…:-) So, if you have a small fridge, like I did, consider chilling the containers in a “transit location”, if possible, in order to shorten the “fridge time”. I used the cellar floor which holds 8ºC. This saved me a total of 36 hours of “fridge time”. Filter once the liquid hits 4-5ºC (perhaps we can even increase generation rate if we let stand even longer. I am really not sure about this but it is worth investigating further.

The other guide said: scoop the crystals out of the filter. However, I like to save the crystals in the filter until I have a large enough batch to process as it maintains the moisture well and keeps it cool. I also like to process the filter papers all at once by using a 2m x 1m plastic board. I open the “seam” on the coffee filter papers and flatten it out like a pancake. Then I use a plastic/rubber spoon like object (the item used to smear cream on cakes) to get all of the content out.

Storage
When you have taken out all the crystals from the filters, put them in a plastic box and keep them with at least 20% water content (no problem if you take them out of the moist filters – newly moist filters = approx 100% water content).

These should be used within 2-3 weeks or they may start to deteriorate and/or may increase sensitivity and thus become more dangerous to transport (according to another guide). If you store them saturated with alcohol in a sealed glass container, you can basically store them safely for 100 years +.put in oven for an hour.

Drying before use
Dry in oven for 30 mins to 4 hours based on water content between 50-80ºC before use. I dried the unpurified PA substance in the oven (no problem) but haven’t yet confirmed with pure PA crystals. It should be safe because I dried DDNP in the oven the same way, which should be considerably more sensitive.

Preparing 1,800kg of AN prills (CAN 27-0-0)
There are large 300-600L diesel tanks in most farms (for fueling the tractor) so just call the supply company and order the required amount of diesel. My 300L tank was almost half full so I ordered an additional 150L this way. I also bought 5 x 20L gas tanks to transport the diesel from the equipment building (where the diesel tank was) to the barn cellar (where I was going to manufacture the ANFO). Since a 20L plastic tank is too heavy to handle efficiently I poured the content into 5 x 4L plastic bottles which I had leftover from all the distilled water used previously.

When you make the order at your local farming supplier (the supplier near the farm you are renting) you should order twice as many “dummy fertilizer). Obviously, before you can make an order in the first place you need to register a “farming company” and acquire a “producing number” from your government. In other words, you have to register as an “official farmer” or you will not be able to make an order from the farming supplier. You should also have enough farming land to justify the order you are placing. 50-90 decares (5-9 hectares) should allow you to easily justify the purchase of 4-5 tons of fertilizer whereas half being CAN 27-0-0. If you do not take these precautions there is a chance you may not pass the scrutiny of the farming supplier as red flags will arise. Also. f example when you order 3 x 600kg bags of CAN27 you should also order at least 3 x bags of the two other types of fertilizer. I ordered 5 x 600kg bags of CAN27 and 5 x of 600kg “dummy bags” which proved to be too much for one person to process.

I then told the office to place the CAN inside of the equipment building and the rest outside. The supply truck uses a “hook” that can place the bag in a 3m radius of the truck. The positive thing about this is that I could close the building sliding door (3 x 3m) and further process the AN without anyone outside noticing.

I then brought 14 x 50kg fertilizer bags (previously ordered from a Chinese company, the bag has two layers, a carry layer and an inner plastic bag that prevents moisture getting in or out) and filled up the bags, transporting them to the barn basement by car (the barn basement is 100m away from the equipment building). When I had emptied 3 x 600kg bags I had around 36 x 50kg bags which I had transferred to the barn basement. Don’t worry about water absorption at this point as the prills have a layer that prevents the prills from absorbing liquid.

I bought several different blenders (both stationary and handheld) and found a suitable machine, which I bought 8 of. This blender, a stationary Electrolux machine with an ice crushing function offered optimal circulation of ground material vs. prills which allowed me to grind 1kg every 30 seconds. I set up 4 of these blenders 5cm from each other on a work bench with an empty 50kg fertilizer bag next to a bag filled with 45kg of AN prills (placed just below the 4 blenders so you can empty the blender glass containers quickly and pour it into the empty bag). You fill up each blender and put it on the lowest strength grinding (you don’t really need more grinding power than this and higher power will most likely wear out the blenders considerably faster). I made a nice rotation ensuring that the uptime of the 4 blenders. I then prepared 12 x 4L containers of diesel close by. Although ANFO requires 7% diesel for optimal detonation you should add 10% or perhaps even 13% like I did to account for any evaporation etc.

As you crush the prills to fine powder it will immediately start to absorb water from the air, so as soon as you have ground a portion you must hurry to pour the content in the empty bag. Once I had filled up 1/4 of the bag I added 1.7L of diesel, before continuing. You add approximately 1.7L at as you fill up the bag with 1/4, 2/4, 3/4 and 4/4. When completed I wrapped the inner bag (like the way you make a pig tail on hair) and closed it with 10 cm of duct tape. Then continuing to wrap, I left 2 cm of empty space before doing the same again. I then bent the upper wrapping down on the lower wrapping and closed it with more duct tape. I then wrapped the outer bag with two portions of 20cm duct tape. I don’t know for sure if this is optimal, but I couldn’t think of a more efficient way to seal the bag properly. After I had grinding 600kg of prills the first blender broke down (the knife handle broke). The second machine broke down shortly after. I replaced these with the backup blenders and continued until I was done preparing 34 bags x 50kg ANFO. By that Time 3 blenders had completely broken down and one more was partly dysfunctional.

Time required to prepare 1 x 50kg bag of ANFO using the above method
It took around 30-40 minutes to prepare each 50kg bag of ANFO. So I spent around 3-4 nights (from 23.00 to 8.00) working this way until I was completely done. I chose to work at nighttime because I wanted to do everything I could to prevent detection. I covered the windows and closed the door on the inside (I had to install a closing mechanism on the door). Due to the loud noise made from the 4 blenders you can’t really hear anyone approaching so I wrote a note on the door of the main building which encouraged them to call my mobile if they needed my presence (add a smiley <3). This work is very tedious so I had my iPod on for most of the time at max volume. I took a 5 minute break for every 2 bags I completed (so basically every 120 minutes). Occasionally, I would have to drive to the equipment building and fill up my 20L diesel containers. I originally planned to process 2 more 600kg bags of AN prills but I was so exhausted that I decided 1800kg would have to do. Mixing in aluminium powder and micro balloons in the ANFO
Adding 10% (by weight) of aluminium powder and 2-3% (by weight) of micro balloons will increase the sensitivity and power of your ANFO substantially. Considering the fact that we do not have access to 34-0-0 (much purer AN) I assumed adding at least the micro balloons would be required to ensure detonation.

Considering the fact that AN powder will absorb water so quickly I concluded that it would be appropriate to add the AL and MB after I had saturated the AN powder with diesel.

You now have around 36 x 50kg bags packed with ANFO

Adding aluminium powder and micro balloons
Commercial ANFO contains approximately 2-3% of micro balloons according to a couple of sources, which makes the ANFO more sensitive and thus requires only a standard blasting cap to detonate. However, commercial ANFO is much purer than the 27-0-0 CAN available to farmers.

I’m now going to mix in the AL and MB using:

45kg of ANFO 5kg of AL (I’m using 400 mesh(62 microns) leafed AL 1,2kg of micro balloons

For a total of 51.2kg per bag

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it was not going to be easy to open them without extreme risk (I thought). According to the warnings; contact with oxygen will risk detonation of the AL, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc can cause detonation.

At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I only managed to produce 200- 300g of booster I had no choice than to continue the AL addition.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosure, even if it involved high risk. Eventually, I manage to file open the enclosure. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of an abundance of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was approx 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

I plan to mix up 1.2kg of micro balloons per 45kg ANFO. I have a total of 40kg of MB in 5 large bags. It is a powder-like substance and inert. But according to the sources; when mixed with ANFO or ANALFO it will generate hot spots and thus making the ANFO or ANALFO more sensitive. I just hope I have the correct type of micro balloons… I assumed that the micro balloons were 2 mm in diameter but these seems to be 0.2 mm or so.

Are you there God? it’s me Anders. The impersonal diary of Oslo Bomber and Mass murderer Anders Behring Breivik.

De Laude Novae Militiae, Pauperes commilitones Christi Templique SolomoniciSo there’s a Mexican vigilante drug ring declared itself a law-keeping fraternity of the Knights Templar, now the Oslo gunman/bomber claims accreditation. The “2083” manifesto which Anders Behring Breivik released through a carefully harvested email list includes a curious diary/progress log, including this passage after a technical setback on day 42:
“I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail.”
 
That’s about as much as God, spirituality, or conscience make an appearance. Breivik’s candid musings share the desensitized voice of his favorite TV show. And he may be the first real serial killer to use emoticons.


I think that Breivik’s affable, sometimes self-deprecating, mostly aggrandizing voice comes straight out of DEXTER, obviously not by chance his favorite show. Though the television character means to depict a loner, there’s a discordant charm which Breivik, probably like a typical Dexter fan, doesn’t have any idea is a horribly ironic incongruity.

Most relevant perhaps is that Breivik is a veteran of the occupation of Iraq. You wonder if Norway will now think hard about its role in the continuing occupation. Maybe sending its mercenary-mentality personalities to sow their oats in a war zone contaminates more than their young men’s consciences.


Breivik’s favorite computer game, a first person shooter, involves racially-variated combatants.

What the media is calling Breivik’s “manifesto” is mostly copy-and-pasted information he gathered from the net: the history of the Knights Templar and lots of how-to for aspiring allies. We’ve bypassed the explosives how-to to present the account of his day to day travails, including this gem, Day 70:

it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done.

However psychologists will choose to describe him, Breivik isn’t stupid, or religious. We’ve annotated this excerpt by highlighting some of the cultural supplements with which Breivik was augmenting his diet, with intentional consequences and perhaps not.

De Laude Novae Militiae, Pauperes commilitones Christi Templique SolomoniciApril – 2011
On April 6th I leased a car (short term lease), from AVIS; a silver grey Fiat Doblo van with 735kg of carrying capacity. They would charge my credit card with 810 euro per month. I needed this car as I had an introduction meeting with a farm owner the next day. I removed all the AVIS insignias so the car would pass as my own.

I had previously made initial contact with the owner of an appropriate farm through an online real estate forum for farms etc. At this point in time I had regularly searched for farms with 30-100 decare of farmland the past 6 months and had around 10 potential leads, all within 4.5 hours driving from the capitol [Oslo].

I had an introduction meeting with the owner, Petter and his girlfriend Tonje, around April 7th. They were around 37 years old and it turned out Petter was renting out the farm for the next 2.5 years due to the fact that he was going to jail for the specified period. He was reluctant to state exactly what he was being incarcerated for but he mentioned something about renting the place to someone who had used it as a marijuana farm. So I assumed that he was somehow implicated. I presented myself in an optimal way and it paid off; the couple seemed to love me, considering me to be the ideal candidate. It is times like these that your acquired experience/competence in sales will pay off. A good salesperson is also a very talented psycho-analyst. So it’s all about identifying the persons pains/problems/worries and saying what the individual wants to hear.

I wanted to move in as fast as possible, for example from April 1st, but as he was scheduled to leave for prison on April 19th and Tonje wanted to live there until May 1st, this wasn’t a possibility. Petter came to Oslo on April 10th and we signed the contract. I was now significantly closer to initiating the manufacturing phase…!

At this point in time I lived with my mom, in order to conserve as much of my funds as possible.

On April 9th, I was inflicted with a virus by my mother and I came down with something that later appeared to be a very resilient throat infection. FFS, this is what happens when you live with people hanging out with hypochondriacs…! It was the third time she had infected me the last two years and I was very pissed off and frustrated. The manufacturing phase was SO close, in only 20 days and now I’m potentially neutralized for the next three weeks… I decided to ride the illness out as I thought it would pass within the week, but it proved to be very resilient. My energy levels dropped by more than 50% and I eventually ended up with an antibiotics treatment.

Video game, first person shooterIt was now April 25th and I was finally back to normal. I had spent the past couple of weeks playing through Dragon Age II and a couple of other newly released games. Awesome! The good news was also that I would be practically immune to any bacterias and viruses for the next 3 months, in the most critical of all phases, as my immunity system had been boosted and rejuvenated significantly by the virus. My training regime had suffered and I had lost a couple of kilograms of muscle mass but most if not all other practical things were now in place for the manufacturing phase.

On April 27th I made the order for the fertilizer which were to be delivered a week later. Prior to making this order I had officially registered my company as an agricultural entity, with emphasis on the growing of specific crops, and I had gotten my official production number (a farming number) allowing me to make orders from the national farming supplier. If they were to screen me they would see that my company was linked to a farm that had 90 decares of fertile land so all was well.

The last week in the capital I spent a lot of time with friends, partying and attending various social events. I knew that it would be the last chance, for a very long time, I would enjoy their presence.

I had somewhat of a liquidity problem though, as I had to transfer a deposit equivalent to three months rent – 3,750 euro in addition to the rent for May; 1,250 euro.

This payment ate up a great deal of my remaining liquidity so I would shortly solely rely on my 10 credit cards with a total of 29,000 credit… As the weekly cap on all credit cards are capped at around 800 euro, I started withdrawal of funds from 3 cards.

Events on the farm from May 2nd 2011 to June 23rd 2011

This log contains a lot of what can appear as “wining” but it serves to reflect my mental state during the stay, a relatively detailed log of events and how I overcame the obstacles that arose. It can also serve as an educational guide or a blueprint for which the goal is to create a more efficient time budget. Learning from other people’s mistakes is always preferable to making them all yourself. It should be possible to drastically reduce the time spent on preparation, assembly and manufacturing based on the experiences shared in this log.
Silver commercial cargo vehicle 

Monday May 2 – Day 1:
I drove up to the farm (2-2.5 hours from the capitol) with my newly leased Fiat Doblo with all the equipment and gear/clothing I needed. I spent most of the day moving and getting my equipment and gear into place.

Tuesday May 3 – Day 2:
I built the fume hood from the PVC plates and screws that was enclosed in the box. It was like an IKEA set and after a few hours I had completed it. Despite of the suppliers assurances they had forgotten to include the 10 cm diameter plastic fume hood tube so I wasn’t able to plug in the dust collector fan. I placed the hood on a regular 50 cm wooden living room table. I placed the 25kg heavy fan on a 1.5 meter high shoe shelf that I just flipped over. I placed it next to one of the living room windows so that I could cut out a plastic sheet using the same measurements as the window. I opened up one of the windows and taped the plastic sheet with duct tape on the window frame and cut a 10cm diameter hole where the tube was supposed to come out. This is the optimal way of doing it as you won’t have to cut in the wall or other surfaces.I would have to pick up a bendable vent tube tomorrow. I also covered the rest of the windows with curtains to block anyone trying to peek through. The fume hood was a very simple construction so if I had more time I would probably just build one myself and save 500 euro in the process.

Wednesday May 4 – Day 3:
Finished creating the metal skeletons for the blast devices and completing other practical issues relating to gear and equipment.

Thursday May 5 – Day 4:
I started to grind the aspirin tablets today, at first using a mortar and pestle. After a few hours my hands hurt and I realized this method wasn’t going to work out for this quantity. I decided I wanted to try an untraditional method by pouring the tabs on a large plastic sheet on the floor, using gravity to crush them with my 20kg dumbbell. This method worked excellently and I was done in about 4 hours. Tonje, the owners girlfriend, called me that evening. Apparently she was taking a 2 week vacation to Gabon and she was leaving this Monday. What a blessing! She said she would come and pick up some equipment from their storage room in the barn once she came back. I reckon I can manage to complete everything within the next two weeks, providing I work hard and efficient!

Friday May 6 – Day 5:
Started to synthesize acetylsalicylic acid from aspirin. Failed badly and ended up with converting the acetylsalicylic acid to worthless salicylic acid goo (at this point in time I didn’t know it was salicylic acid but It seemed very difficult to dry the substance). The guide I was using was significantly lacking. I realized I didn’t have any other contingency plan and I began to somewhat panic. As I was unable to find any solution online the next two hours I began to lose heart. As I had discarded my digital library of explosives guides I tried to locate guides, searching online with anonymizer software, for a completely different booster compound. As I realized that this task could take a week or maybe two my motivation and morale at plummeted. If I couldn’t even synthesize the first phase of the easiest booster how on earth would I manage to synthesize DDNP?! My world crashed that day and I tried to develop an alternative plan. violent tv series I went to a restaurant in the northern town that evening and enjoyed a three course meal. I later watched a few episodes of “the Shield”.

Saturday May 7 – Day 6:
The only rational approach to this problem is to search online until I find a proper guide to synthesize aspirin powder into pure acetylsalicylic acid. After several hours of research my findings were extremely discouraging. All the guides I had found; mainly university level chemistry projects, required a suction filter pump and a chemistry air dryer. The even more discouraging news was that even with this equipment none of the university students managed to get a better yield than 30%! Omfg, this would mean that even with the equipment I would never acquire, my total yield would not surpass 30% which would severely cripple the overall plan… I went to another restaurant that evening (I find it an effective method for getting my morale up) to create a new plan. In any case; I appear to be fundamentally fucked If I cannot manage to find a solution soon.

Sunday May 8 – Day 7:
Failure is not an option for me. I continued my search on methods for the purification of salicylic acid online. After many hours of searching the net, using various search phrases, I managed to locate a single YouTube clip, with very few hits, which explained in detail an unconventional method for synthesizing acetylsalicylic acid from aspirin. However, the guy was using a suction filter pump and a laboratory air dryer but I figured I could bypass this requirement by using more funnel filters and by using an air drying method. According to the guy on the movie, he managed to achieve a 70-80% yield! This method seemed to be viable and I would try to create a batch the next day.

Monday May 9 – Day 8:
I tried the unconventional method for synthesizing acetylsalicylic acid with a promising result. I couldn’t actually confirm that the product I had was in fact purified acetylsalicylic acid so should I take a chance and manufacture it all using this method? Considering the fact that I had wasted so much time, I decided that I had no other choice than to initiate mass production even though I risked ruining all my aspirin. Because if I were to wait for a small batch, It would simply take too long, so I had no other choice than to take this calculated risk.

Tuesday May 10 – Day 9:
Considering the fact that I had wasted so many days and literally been at a standstill I felt a sudden need to create an evacuation plan as I didn’t have any. What would I do if the owner’s wife caught me, or the neighbor or anyone else? I needed to work out a plan for this potential scenario. The evacuation plan involved a 10 minute evacuation. I would have to pack my largest backpack with survival gear and related equipment, including survival rations, 10L of water, weapons, ammo and suitable clothing. I started to prepare the above.

Wednesday May 11 – Day 10:
I completed packing an evacuation kit. I felt a lot more safe and prepared for any emergency once I was done. When I returned from the southern town later that day, I saw two military 12 man teams, armed to the teeth, just 2,000m south of my farm. The largest military base in the country is located just a few kilometers north-east of my farm and their territory extends almost all the way down to my property. They have notified all their neighbors, me included, that they are conducting a large military training session as to prepare a new division of soldiers for the war against the Taliban and al-Qaida in Afghanistan. It’s quite ironic being situated practically on top of the largest military base in the country. It would have saved me a lot of hassle if I could just “borrow” a cup of sugar and 3kg of C4 from my dear neighbor 🙂

Thursday May 12 – Day 11:
As the acetylsalicylic acid purification and the rest of the picric acid production required a substantial amount of mineral and distilled ice cubes I spent the whole day converting water to ice cubes; a total of 50L converted whereas 20% of it was from mineral water. I ended up completely filling up a very large freezer with ice-cube-plastic-pocket-sheets.

Friday May 13 – Day 12:
As the acid manufacturing went too slow I bought more funnels at the local store, to up the production rate. I continued to synthesize acetylsalicylic acid from aspirin that day.

Saturday May 14 – Day 13:
I continued to synthesize acetylsalicylic acid from aspirin.

It’s the Eurovision finale today. I just love Eurovision…! 🙂 It’s a lot of crap music but I think it’s a great show all in all. I’ve seen all the semi finals and will take the time of to watch it later today, online. My country has a crap, politically correct contribution as always. An asylum seeker from Kenya, performing a bongo song, very representative of Europe and my country… In any case; I hope Germany wins!

Sunday May 15 – Day 14:
At the last batch of preparing pure acetylsalicylic acid my hot plate stirrer broke down. The magnetic mechanism stopped working. Fuck, Chinese piece of shit equipment, I should have rather paid more to get good European quality machinery…! What should I do now? Creating picric acid and DDNP without a magnetic hotplate stirrer would be very labor intensive and difficult and ordering a new product from a national supplier would take at least two weeks… I really don’t have much choice in the matter. I’m ordering a new plate today and I can focus on the non-chemistry tasks until I receive it.

I managed to completed to synthesize the last batch of acetylsalicylic acid from aspirin without my hot plate stirrer. I now had to dry it. After scraping out all the content from the filter papers I spread the content evenly on several plastic boards. At first I put the boards in normal room temperature, but as this proved to be a very slow method I ended up placing the boards in a small room with a oven at maximum temperature (around 30ªC). In retrospect I realize I would have saved several days by just drying the purified acetylsalicylic acid in a Pyrex dish in the oven at 50-70ªC, but even now I am not sure what effect heat above 30ªC would have on the acid. I am 70% certain it would be the optimal method though as this oven method works (confirmed) on drying both PA and DDNP.

Monday May 16 – Day 15:
Mixing up and further drying all the acetylsalicylic acid on the plastic boards.

Tuesday May 17 – Day 16:
Since I cannot continue on the chemistry phase, due to the lack of a hot plate stirrer, I started boiling my sulfuric acid outside. I initially bought 3 specialty induction plates (flat porcelain) but they didn’t function as my 2L beakers didn’t cover the minimum diameter required for the induction plates to function. I began with one hot plate and created boiling stones by crushing a few small lab beakers. The boiling stones only made the boiling more difficult and complicated so ended up without the use of boiling stones.

Wednesday May 18 – Day 17:
Continued boiling, now with three regular plates for maximum efficiency. Boiled after dark as the smoke generated as the acid surpassed 70% was so thick and compact that it would surely alert neighbors even several miles away.

Thursday May 19 – Day 18:
Wanted to set on a plate, boiling sulfuric acid, while I did some shopping in the northern town. I noticed someone lurking outside the door and saw the neighbor. There was a BMW in the upper barn area he was going to fix up for the owner. As I was about to go outside in full protective suit, he almost saw me before I saw him. I helped him push out the car and gave him the gasoline required to drive it to his place. I’m going to stick to nighttime boiling from now on to reduce my exposure to any unwanted surprises. I was very lucky today, something I cannot take for granted in the future.

It’s essential to create as much goodwill you can from the neighbors. Use any opportunity to generate goodwill from them. This goodwill will be returned indirectly by them not probing and investigating. If you get a visit from neighbors, be polite and friendly, offer them sandwiches and coffee, unless it will jeopardize the operation. The goodwill generated is likely to be to your benefit later on.

Friday May 20 – Day 19:
Finished boiling sulfuric acid

Saturday May 21 – Day 20:
Went to the capital to pick up a few parcels; 5 large packages of micro balloons and 50 more liters of distilled water. I also purchased a 50kg weight dumbbell set for fertilizer grinding, costing 700 euro, as it would most likely be the best way to crush the fertilizer prills using this method.

On my way home to the farm I noticed what I believed to be a civilian police vehicle south of the southern town (30km from the farm). At this point in time I remembered I had forgotten to turn on the lights on the car since I tested out my blue LED lights the day before. Hmm, they should have stopped me for this violation. Very weird. As I came closer to the farm I noticed what I believed to be another civilian police car. Damn, I got a really bad feeling about this and my instincts told me I was about to be apprehended. Too many red flags were lit. I stopped 500 meters before the farm entrance and had a smoke, preparing mentally for a potential welcoming party at the farm. What should I do if I was about to be SWAT raped by a 6 or 12 man team? I didn’t have any weapons available as they were all inside the main house. Should I make a run for it, if so, where would I go? Would I have time to fetch my evacuation kit, and should I try to get it and shoot my way out?

After the break I approached the farm, and turned on the fog lights on the car so that I could have an advantage should they approach me from the front. I stopped 50 meters north of the main house and I was shocked at the sight that awaited me…! The barn door was wide open!!! Someone was here! They were probably circling me right now or waiting for me inside the main house! I waited 20 minutes with the fog light aimed straight at the direction I expected them to come from. Perhaps they are not here, maybe they just installed monitoring equipment like they often do? I entered the house, pistol picked up the glock and searched the house and the barn. Nothing. I began searching for monitoring equipment, nothing…

Paranoia can be a good thing, or it can be a curse. The barn door had probably been opened by the wind. I decided then and there that I would not allow paranoia to get the best of me again. If they were to come for me one day, there was really nothing I could do about it, so it would not be constructive to worry about it.

Sunday May 22 – Day 21:
Started relocation of fertilizer. Broke down a 600kg bag into 13-14 x 50kg bags, loaded in the truck, drove 100 meters and carried them with a “carry trolley” into the barn. Did a full 600kg bag. Was exhausted.

Monday May 23 – Day 22:
Initiated the fertilizer grinding phase. I was unsure whether I had to pulverize the fertilizer or not. Most guides said it was a positive thing as some fertilizer prills are coated with an anti-absorbing layer. I crushing a small batch, placed it in a plastic bag and soaking it in diesel, I also prepared another small bag of prills and soaked that in fuel to see whether it would absorb any liquid. Updated log

Tuesday May 24 – Day 23:
The prills had not absorbed any diesel at all, during the last 24 hours, so I concluded that the only approach is to pulverize the 5 x 600 bags of 27-0-0 AN fertilizer. I cleaned the concrete floor in the barn thoroughly and poured 50kg of fertilizer prills on it, spreading it evenly so that I could roll the 50kg dumbbell back and forth to crush it, and then use a broom and spade to gather up the pulverized AN before it had absorbed a lot of moisture from the air. I was sure that this method would work as I managed to semi-crush the prills with my 20kg dumbbell. If a 20kg dumbbell almost could do it, then surely, a 50kg dumbbell would ensure excellent grinding. I estimated that I could grind 50kg within 20 minutes, 3 times faster than any other method I had heard of.

To my great disappointment, crushing the prills with the dumbbell failed miserably. The prills were only partially crushed and rolling the dumbbell proved to be an especially labor intensive experience. Also, the crushed prills absorbed moisture much faster than anticipated so the time required for me to crush 50kg (2 hours) would result in more or less AN powder fully saturated with water moisture… Fuck, why can’t anything go as planned???? And the dumbbell set cost me a total of 750 euro and now it has proven to be worthless… What do I do now?

Wednesday May 25 – Day 24:
As this was a big setback, I decided to seek comfort and attempting to erect my morale, which was currently in the toilet, at the restaurant in the northern town, ordering a three course meal while readjusting the plan. I had previously heard of a Marxist terrorist traitor in the early 70s. I believe he was called Baader or could it have been Meinhof, terror prostitutes for the Soviets and loyal dhimmi whores of the Islamic Ummah. Anyway; I remember reading about him using electrical mixers to crush AN prills in his apartment. Apparently, he had purchases several crates of these mixers and used several simultaneously for efficiency. I’m going to test this out shortly. If electrical mixers/blenders from the 70s could do it then surely; new modern blenders can!

Thursday May 26 – Day 25:
Shopping for blenders. Bought around 12 – stationary and handheld, different brands for testing.

Friday May 27 – Day 26:
heavy duty mixerStarted crushing fert prills, testing out the various blenders. More than half of them where completely useless as the shape of the container prevented proper circulation of the prills after crushing them. A suitable blender will ensure flawless circulation and result in a fully crushed batch within a reasonable time frame. Found a perfect blender; Electrolux. which was able to fully crush 95% of the prills, in portions of 0.5-0.7kg within 20-35 seconds.

Saturday May 28 – Day 27:
They had the Electrolux stationary blender in limited supply so I had to drive all day to purchase 6 from three different cities.

Sunday May 29 – Day 28:
Continued relocation of the fertilizer. Did another 600kg bag.

Monday May 30 – Day 29:
Completed the third 600kg bag. I could hardly move my fingers and I was certain that I had damaged them permanently. I decided to limit the process to three bags as the work required to process 5 bags (3000kg) would simply be too exhausting for one person…

Tuesday May 31 – Day 30:
I had to rest the whole day as I was completely exhausted…

Wednesday June 1 – Day 31:
Updating log

Thursday June 2 – Day 32:
I saw a car driving through the property while I was surfing the net. As I went to greet him I noticed he was taking pictures of the farm. He, around 50-60, said he was a tourist wanting to take landscape pictures. His actions and body language indicated however that he was lying. My instinct told me that he was a police officer. I offered him coffee and suggested he should go down to the river bank as it was the optimal place for taking photos. I noticed that he continued to take pictures of the farm. When he approached the house I chatted with him again. From what I understood, reading his body language and between the lines, he worked for the police and he was following up on the “marijuana farm” case. He disclosed that his daughter was a drug-sniffer-dog trainer. He was probably taking pictures in relation to this case. I told him that some people had set up a marijuana farm here a few years back. He seemed surprise, although he probably knew that already. This encounter was a concern for me for a few days, but I decided to just forget it as it wasn’t anything to do about it if he was to return. I’m just glad I gave him a good impression.

I decided to begin crushing the fertilizer using four Electrolux blenders simultaneously. However, it made a lot of noise so I decided to do this work from 23:00 to 07:00. I managed to complete 5 x 50kg bags, mixing in diesel 4 times per bag to distribute it evenly, then closing both the inner and outer bags properly using 5 individual pieces of duct tape. It is essential to hurry to place the crushed AN into the bag as it will begin to draw moisture from the air immediately after it is crushed, even while being inside the blender container.

Friday June 3 – Day 33:
Continued crushing prills and mixing with diesel. I got into a good routine and managed to complete 10 bags. Very exhausting. I spent around 1 hour for each of the first few bags the day before, but managed to increase efficiency so that I completed 1 bag every 40 minutes (optimal achievement was 1 bag per 32 minutes). 20 bags to go… 2 of the blenders broke after processing 12 bags, even though I used it on the lowest power alternative. Replaced them with new ones.

Saturday June 4 – Day 34:
Completed 6 bags.

Sunday June 5 – Day 35:
Completed 4 bags. 2 more blenders broke down. I have to buy a couple of new ones tomorrow.

Monday June 6 – Day 36:
Bought two more blenders. Completed crushing 1,600kg of fertilizer prills and mixing with diesel. I’m going to save the last 200kg and possibly use it as an “inner charge” mixed with purified RC fuel (nitro methane). I will most likely only have enough nitro for 1 x inner charge though. After completion of the grinding, it was prills and AN dust all over the place :)) My green AN-crushing clothing were now grey… Surely, I’m going to die from cancer within 12 months as I must have gotten a lot of this crap into my lungs even though I used a 3M mask… It took a while to clean it all up to prepare for the next phase.

Watching “The Shield”, a couple of episodes each day on average. I downloaded all 7 seasons in the start of May.

Tuesday June 7 – Day 37:
Went to the capitol and picked up the new hot plate stirrer that had arrived.

Wednesday June 8 – Day 38:
Started synthesizing picric acid, completed 1 out of 10 batches.

Thursday June 9 – Day 39:
I heard someone parking their car outside the house today. It was one of the neighbors wanting to buy the current crop as animal food. As I hadn’t had the time to plant a crop of my own, the current one was primarily timotei [Timothy Grass] and clover – used for food to cows and sheep. We discussed the issue for a while and I explained my situation to him. We agreed that he could harvest the current crop. He would return within 14 days to initiate the harvesting. I offered him a good price. As we strolled down to the field I was somewhat concerned that he would notice the fume hood fan pipe sticking out of the living room window…

Continued synthesizing 2 and 3 of 10 batches of picric acid and placing the finished compound to dry. It took a long time to complete the nitration of the acid due to the fact that I only had 1 hot plate stirrer. If I had 3 I would be able to complete all the PA within 2-3 days. Damn, something went wrong with these two batches. The solution was red and it failed to nitrate properly. I concluded that I must have used a bottle containing 37% sulfuric acid, instead of the required 90% +…

Friday June 10 – Day 40:
Continued synthesizing 4 and 5 of 10 batches picric acid and placing the finished compound to dry. I placed 50g of my best batch in the oven to prepare for testing and to use it for DDNP manufacturing. Potent PA should burn when lit with flame.

To my great disappointment, nothing happened when I did the fire test…! What the hell, how is that possible, it was completely dry and that particular batch was manufactured perfectly according to specifications!? I did everything according to specifications… Could the compound I have manufactured be inert???? Unfortunate circumstances rams cock in arse once again…! I started to have serious doubts and my morale and motivation started to shatter…

I concluded that given the recent events, I would now have to move forward with operation B, at least continue to complete all preparations for this as the primary operation seemed to wither away.

Saturday June 11 – Day 41:
As I was doing research on the net, a thunder storm approached, but it was still very far away. I have never had any problems with electrical overcharges the last 15 years because I always use specialty electrical outputs with gas cylinder electrical overcharge protection. Suddenly my PC made a relatively large bang, and the electricity went out. Once electricity was back on I noticed that my PC was dead. FFS, not again… As it was in the evening, I couldn’t fix it until Monday…

I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail. He must ensure that I succeed with my mission and as such; contribute to inspire thousands of other revolutionary conservatives/nationalists; anti- Communists and anti-Islamists throughout the European world.

Sunday June 12 – Day 42:
Although highly demoralized, I decided to do one last test of the PA compound. I decided to create a batch of DDNP using my best batch of picric acid. This was to be my last attempt to move ahead with operation A. I didn’t have much faith in creating such a difficult compound as DDNP when I couldn’t even manage to create a decent batch of PA… I spent most of the day preparing that batch of DDNP, then drying it in the oven for 4 hours.

Monday June 13 – Day 43:
I prepared a test device today and drove off to a very isolated site. The test bomb was composed of a 3g DDNP primary and a 30g PA secondary. If this test would fail, I would abandon operation A and move forward with the non-spectacular operation B.

I lit the fuse, went out of range and waited. It was probably the longest 10 seconds I have ever endured…

BOOM! The detonation was successful!!! 🙂 I quickly drove away to avoid any potential unwanted attention, from people in the vicinity. I would have to come back a few hours later to investigate the blast hole, to see if both compounds had detonated.

A few hours later, after returning from a restaurant in the southern town to celebrate this success, I went back to the blast site to evaluate the detonation. The DDNP primary detonated successfully but the dry picric acid booster did not detonate at all. So I confirmed that the PA was not inert, just of a very low purity grade. This could be sorted as I would now move forward with purification after completion of the last PA batches. Today was a very good day as I really needed this success.

Tuesday June 14 – Day 44:
Continued synthesizing picric acid and placing the finished compound to dry.

Wednesday June 15 – Day 45:
Continued synthesizing picric acid and placing the finished compound to dry.

Thursday June 16 – Day 46:
Began purification of the PA compound.

Friday June 17 – Day 47:
At this point in time, considering that this project has taken much longer than anticipated, I was in a serious liquidity squeeze. The fertilizer invoice on 4,500 euro should have been paid on May 19th. I had called to the company and asked for an increase grace period and they said it was ok as long as I paid before June 8th. This was almost 10 days ago and I received a follow up notice today stating that they would forward the invoice to the credit collection company on June 22nd. In addition to this; the farm rent for July, 1,250 euro, was due on June 25th and the invoice for the fume hood, the hot plate stirrer and my secondary fan, which I wasn’t even going to use, 2,800 euro, was due on June 26th. This would mean that I would officially default on the payment and receive a credit warning, which would basically blacklist me and thus preventing me from renting a car, as the car rental companies always perform a credit check. Needless to say; this problem could sabotage the whole operation and I needed to sort this out asap or the operation would be over before it had even started… I needed to acquire 8,550 euro within a week! As I had 1,500 in cash and in my primary account, I decided my only choice was to aggressively withdraw funds from all my 10 credit cards but even that wouldn’t be enough because of the weekly capacity limit. I called the farming supplier and made an agreement where I would pay half the amount now and the rest in July. They agreed. After aggressive cash withdrawal I managed to acquire the necessary funds, which allowed me to keep my head above the water until mid July.

At first, I thought I would manage to create enough picric acid booster material (1.5kg in total) to disregard the addition of AL powder. But considering the fact that I would only manage to produce aprox 200-300g of booster I had no choice than to continue to prepare my 150kg of aluminium powder for addition in the ANFO.

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the “security precautions”, however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it would be difficult to open them without taking extreme risk. The warnings stated; contact with oxygen will risk detonation of the AL powder, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc. can cause detonation.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosement, even if it involved high risk. At this point in time I was very concerned for a potential detonation. If the barrel of AL powder was to detonate and I somehow survived, I would probably lose both arms instantly severely. The blast wave/flame would probably cauterize my wounds resulting in an extended and extremely painful death. The most pragmatical approach to solving this potential problem was to place my loaded glock 34 close to the work area. And if I survived a detonation, losing both my arms, I could still fire a round to my head, in order to prevent un-necessary suffering using my toe to trigger.

Eventually, I manage to file open the enclosement. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of high levels of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was aprox 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It’s also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

Since I had solved the AL problem, I continued the purification of the PA.

Saturday June 18 – Day 48:
I woke up at 11:00 and checked my phone. There was an SMS sent 09:30 from Tonje, the owners girlfriend. She said she was ON HER WAY UP to pick up some equipment from the barn!!! Omfg; considering the fact that it’s a 2-2.5 hour’s drive from the capitol she would be here in about half an hour!!! I’m so fucked! She has a large storage room in the back of the barn and she would need to pass all my ANFO bags to get there. I would need 12 hours minimum to relocate the 1.2 tons of ANFO, not to mention de-construct my chemistry rig, fume hood, fan and clean up all the beakers etc spread all around. And the living room is full of yellow stains. It seems I will be left no choice than to use my glock and initiate the evacuation plan!

I called her up. Luckily she hadn’t left yet. Thank God! I fed her a story which resulted in us agreeing that she would come on Monday around 20:00. That was a real close one… I spent the rest of the day on purifying another batch of picric acid and relocating 1.2 tons of ANFO bags, storing them in the storage area between the corn silo and another room. I refer to this area as the spider cave or the spider room as there is no lighting there and it is spider webs all over the place. It is a lot of old junk in this room covered with spider webs.

Sunday June 19 – Day 49:
I spent much of the day relocating equipment and storing them in the second floor of the house. I covered all the stains on the floor with a rug and covered the living room table with a blanket.

Monday June 20 – Day 50:
I spent the day purifying a batch of PA and cleaning all the beakers for storage. I went all over the property to ensure that it would be presentable for today’s visit. There was a 37kg pile of aluminium powder on plastic sheet I was unable to move so I covered it up as best as I could. There was also a lot of stains on the work bench in the barn I was unable to do anything about. Then there was the 1.8 tons of ANFO bags and equipment stashed in the spider cave. I covered it up properly but she would easily notice the diesel smell from the bags and uncover it if she went in there… The fate of the whole operation relies on her not noticing. She came to the farm around 20:30. We talked for a while and she said she wanted to stay the night, sleeping in one of the outhouses. It was late in the evening so she wanted to spend the next day getting things from her storage room. I said it was fine and I fed her a story about me having to salvage much of the fertilizer for long term storage, seeing that I would not be able to sow the planned crop (sugar beets) due to too much rocks in the soil. I needed her to be prepared in case she went into the spider room. I just hope she would let me know if she got suspicious the next day so I could take necessary action…

Tuesday June 21 – Day 51:
I woke up earlier that day to ensure that she didn’t start sniffing around in the house without me being there. At this point in time I figured it was a 50% chance she would get suspicious enough to contact the authorities. I made her some sandwiches and coffee later that day and we chatted for a couple of hours in the living room of the main house. It would seem as she hadn’t noticed anything, at least this is how I interpreted her tone, body language and judging from the topics we discussed. She went off later that day, and I figured that I would very shortly get a visit from the authorities if she forwarded her potential suspicions. In any case; there was nothing I could do if it came down to that…

Wednesday June 22 – Day 52:
I reinstalled Windows 7 on my PC hoping that it would solve my network problems. It didn’t work and I figured it had to be the network card or the phone line itself. I drove to the PC-repair guy in the local town and delivered it. It should be ready by tomorrow. I continued to prepare the chemistry equipment for getting ready to manufacture all DDNP batches. When I was done I completed the last purification batch of the unpurified picric acid and ended up with several liters of PA liquid that had to be chilled. I then drove to the local town and bought three portions of Chinese takeaway. Beef with noodles and fried rice, yummy!. I took an early night as I didn’t have any PC.

Thursday June 23 – Day 53:
I went to the PC-repair guy in the local town today and he brought very good news. Apparently, it was only the network card that had short circuited so he had replaced it with a new one and I should now finally be able to get online. Once back at the farm I got online and paid the outstanding on the remaining of my 9 credit cards so I wouldn’t default on any of the outstanding amounts. When I was about to log into the site of the 10th and last credit card provider my PC went poof and the power went down in the house! Seconds later I heard a large thunder. What the hell, not again!!! And it isn’t even raining ffs. I was able to get the PC running again without problems but my DSL-modem short circuited from the lightning strike as an electrical surge went through the phone line again. How is it possible to be this unlucky?! Only two hours after I’ve had my PC fixed nature comes and rapes me again… Thank god it was only my DSL-modem was destroyed as I have two extra DSL-modems left… ;P Nevertheless, my morale took a small dent and I decided to get it back up by watching two episodes of Rome and enjoying nice Chinese takeaway. Later that day set up the fume hood and fan, carrying it down from the second floor, carried down the PA liquid in all the beakers down to the cold cellar, awaiting further chilling in the refrigerator. I then prepared for the first large batch of DDNP, halfway completing it before putting the semi finished product in the fridge.

Friday June 24 – Day 54:
I continued on the second stage of the first large DDNP batch today, relocated some of the containers with PA liquid from the cellar to the fridge and updated the log. I couldn’t start another badge due to the fact that I only have two 2 liter beakers, very annoying. The worst part about synthesizing formulas with a lacking amount of equipment is the downtime due to waiting for natural heating or chilling of compounds. The whole house is stinking of chems now. DDNP liquid smells like fresh egg fart… <3 And I had to close all the windows to contribute for the liquid to reach room temp faster. All these chemical fumes can't possible be very healthy... I would have probably died from cancer within the next 12 months ;P Saturday June 25 – Day 55:
Finished first large batch of the DDNP today. The result, after drying should be approximately 5-12g after purification. As the first half of the PA liquid had been chilled in the fridge for 18 hours I went ahead and funnel filtered out the crystals. As this was supposed to be the best batch of PA I was extremely disappointed to see that there had been minimal precipitation of crystals in the liquid. It should have been 15g of crystals for each liter but it turned out to be 2g per liter. The only rational explanation is that the purification method I am using is significantly flawed. However, considering the fact that I tried putting ice in the beakers and even putting them in the freezer with poor results, I really do not know what has gone wrong. The only alternative reason would be that I used a flawed manufacturing method of PA or that I should have purified the acetylsalicylic acid prior to initiating the PA manufacturing. As I can’t really do anything at this point regardless, I would like to think it’s the purification method and not the manufacturing method.

After I had scraped out the yellow PA crystals and the brown DDNP crystals putting them in plastic boxes and placing them in the cold cellar I went to do some shopping in the northern town. There is a festival and there was a lot of things happening, a fair, various food stands, concerts etc. Since this town has a limited variety of fast food I decided to drive down to the southern town, eat and pick up some Chinese takeaway. There was a relatively hot girl on the restaurant today checking me out. Refined individuals like myself is a rare commodity here so I notice I do get a lot of attention in both the southern and the northern town. It’s the way I dress and look. There are mostly unrefined/un-cultivated people living here. I wear mostly the best pieces from my former life, which consists of very expensive brand clothing, LaCoste sweaters, piques etc. People can see from a mile away that I’m not from around here.

Later that day I initiated a new batch of DDNP. As I completed the first phase I noticed one of my two 2L beakers had a large crack in the bottom and drops of liquid was coming out. I was very lucky the beaker hadn’t completely cracked open as it would have destroyed my hot plate stirrer for sure. I remember there was a tiny crack that appeared during sulfuric acid purification when I was boiling as a madman outside. Now the beaker is ruined. To be honest; I’m surprised this hasn’t happened earlier as I’ve abused these two beakers excessively. I made a mistake by buying only two 2L beakers instead of 4-5. That mistake has cost me at least 3-4 days in total. The loss of this beaker poses a significant problem as I relied on these two beakers to take me through the whole manufacturing process. If I go down a size and use the last 1L beaker I have left (I managed to break one during washing after boiling all the sulfuric acid outside. it will take me an extra day to complete the DDNP manufacturing. I’ll see what I’ll do later today.

While waiting for the liquid to reach 4ªC in the fridge I went to train for the second time since I came to the farm. I used two backpacks, one in front and one on the back, with a total weight of 27kg. In addition I filled a container with 5L of liquid and held it with my left and then right arm partly stretched out in front of me. I took a 20 minute walk with these weights and it was a great exercise. As always I take protein powder + creatine before and after the exercise to maximize the outcome. I’m almost out of my steroid/winstrol tabs now as this project has taken significantly longer than expected. I only have a few days left worth of tabs so I have to sort this out in the coming days. I was thinking of traveling back to the capitol and restock after I complete the DDNP production. Damn, the most annoying thing about synthesizing DDNP is that you have to wait 12 hours for the liquid to reach 4ªC in the fridge, later on you have to wait 3-5 hours for the compound to chill from boiling to room temperature and at the last phase you need to wait 12-18 hours for the liquid to go from 4ªC to room temperature. In other words, one batch of DDNP takes approximately 40 hours. If I had 6 x 2L beakers instead of 2, it would allow me to complete 3 batches in less than 2 days (45 hours), instead of having to spend more than 5 days (120 hours) due to lack equipment…

Sunday June 26 – Day 56:
Completed the second and third phase of the second batch of DDNP. I moved the last batch of PA liquid from the cellar to the fridge. Updating log.

I am noticing increased pressure from my friends and family to come visit me at the farm. I am countering by saying I will be done with this seasons work within x weeks, and that they are more than welcome to visit me then. This has worked for 2 months now, but this pressure will increase progressively as I delay.

Monday June 27 – Day 57:
Filtered out the pure PA crystals from the last batch of PA water after chilling it in the fridge for 12+ hours. Cleaned out all the beakers. Completed the last stage of the second batch of DDNP. Initiated the first stage of the last batch of DDNP. As I have now re-initiated my training I did a workout later that evening.

Tuesday June 28 – Day 58:
Continued on the last DDNP batch. Went to the northern town to do some errands. Updating log. Later when searching online for efficient DDNP purification methods; I just learned that when acidifying the sodium picramate solution during DDNP manufacture, H2S and SO2 is released, which is potentially deadly. Crap, and I’ve been inhaling that diarrhea gas for three days now! I didn’t even bother turning on the fan in the fume hood on a couple of occasions during that stage…

Wednesday June 29 – Day 59:
television seriesCompleted last batch of DDNP. I was now facing the task of purifying it, but was uncertain how to approach this. Was it necessary to purify it at all? How much would the VOD (velocity of detonation) suffer from not purifying it? Would it cut the VOD in half? My whole operation depended on the VOD from my primary being able to detonate the secondary explosive. After a few hours of research online I found that mixing the unpurified DDNP in acetone, then filtering it to another beaker with a lab filter or alternatively two coffee filters and then boiling the acetone away over a hot water bath, would be the optimal approach as the precipitation method with ice cold water method apparently didn’t work for those that tried it. The problem now was that I only had one conical flask and one porcelain boiling dish (100ml) suitable for this type of purification method. I feared that this method would take a very long time with the lack of equipment. As I didn’t have much choice I began the purification process. I managed to purify 1/3 of a batch (I had three batches) in 3 hours. As I got the hang of it I managed to reduce the time spent to 2 hours. Watching Spartacus – Blood & Sand, a brilliant series :-). It’s my favorite one, in addition to Rome, Battlestar Galactica, Caprica and Stargate Universe! <3. television series The Shield, Dexter, Sleeper Cell, Vampire Diaries and True Blood are good as well. All the series adhere to the multiculti ideology but such is life for the time being.

Thursday June 30 – Day 60:
This house is infested with beetles. Just now I was about to reach for a chocolate in my goodie bag and a beetle had crawled in, ffs. And an hour ago, when I was putting on my nitril gloves to do another DDNP purification cycle, something was crawling in one of the fingers 🙁 Needless to say, I freaked out… After that I started killing every little insect in view. And I’m up to 18 just in the last hour… Parts of this house is from 1750 so it’s probably several bug colonies in the walls.

I haven’t slept at all since yesterday, trying to complete the last DDNP purification. That will complete the chemistry phase and I can move on to the last ANFO –>ANALFO phase. Addition of aluminium and micro balloons to the 1.8 tons of ANFO. But before I start the last phase, I need to travel to the capitol for resupply.

When I went inside the barn yesterday, a window had loosened and laid smashed on the floor. There are several signs of noticeable wear outside as well. Three large trees has blown down and two panels on the side of the barn has blown off. Anyone seeing this must think I don’t give a damn… I haven’t had the time or energy to sort that out yet. Perhaps when I’m done with the chemistry phase…

As I’ve now completed the purification process of 25g of DDNP (I will save an additional batch of unpurified 12g as backup), it’s time for me to wrap up the chemistry phase. I do have 50L of impure nitro methane (30% RC fuel) in the barn but it’s a bit tricky to purify it. I will see what I can do about it tonight. If I can’t find an appropriate purification method I’ll just skip the NM altogether. In any case; I can now dismantle the lab, again…

I talked to my friend, Peter, after missing one of his inc. calls earlier. He is visiting his girlfriend in a nearby town and wanted to stop by the farm… I fed him a story about me going to the capitol and it worked, for now… However, it would not be suitable to receive visitors here as anyone stopping by would eventually understand that things are not what they seemed. I have to be careful not to answer his calls while he is so close to the farm. Manipulation and deceit can quickly turn around and act in your disfavor, if you are not careful. I guess I have been somewhat reckless in regards to maintaining my social network. Choosing complete isolation and asocial behavior, in phases like these, would probably be a more pragmatical approach for ensuring secrecy. However, complete isolation and asocial behavior can also defeat the whole purpose if you end up losing the love for the people you have sworn to protect. Because, why would you bless your people with the ultimate gift of love if every single person hates you?

Friday July 1 – Day 61:
Ok, I have now completely dismantled the lab and stored all the equipment in boxes on the second floor. Removed all the glass from the broken window near the work bench in the barn and fastened a plastic sheet with duct tape.

It is now 8 days since I was forced to drastically reduce my winstrol intake and 2 days since I ran out of both winstrol and DBOL tabs. I’m noticing slight symptoms of withdrawal resulting in loss of muscle mass (down 3kg from my peak at 96kg). I’m also low on no-Xplode and protein powder. I need to restock in the capitol. Damn, Peter is visiting his girlfriends sister in central Norway and Marius is unavailable due to work.

Saturday July 2 – Day 62:
Going over the travel route for both plan A and B for the upcoming event, familiarizing myself with the driving routes and plotting in destinations in my Garmin GPS. I went to the gym and did a really hard workout. I was surprised I managed to lift as more or less as much as I could when I was at my best, in late April. However, I had to cancel the program half way because I was getting dizzy. Damn, just too long since I properly worked out.

Nice, I have enough winstrol for 20 more days (10mg x 100 tabs). I should have ended this cycle after 6-7 weeks though and I am now on my 9th week… Not healthy at all and I’m concerned about my liver values.

I took my mom out to dinner this evening, then hooked up with Axel for a coffee afterwards, discussing politics. Oh, how I missed these discussions… 🙂 Went back to the farm late in the evening.

Sunday July 3 – Day 63:
Raining again… I planned to extract the armor cache today (the Pelican 1620 case I buried July 2010) or initiate evaporation purification of my 50ish liters of nitro methane, RC fuel. But I will have to wait for the first sunny day. Will have to begin the final phase shortly, the mixing of AL and micro balloons in the ANFO. I think I’ll take a day off prior to the upcoming phase shift and just download some new trance tunes. Lange feat. Sarah Howells (amazing voice) has three songs I haven’t yet downloaded;

Lange Ft. Sarah Howells – Fireworks (Club Mix),
Lange Ft. Sarah Howells – Out of the Sky (Original Mix) and
Lange feat. Sarah Howells “Let It All Out” (Lange)

Noticing that the testo withdrawal is contributing to increased aggressiveness. As I’m now continuing with 50mg it will most likely pass. I wish it would be possible to somehow manipulate this effect to my advantage later on when it is needed. Because the state seems to very efficiently suppress fear. I wonder if it is possible to acquire specialized “aggressiveness” pills on the market. It would probably be extremely useful in select military operations, especially when combined with steroids and ECA stack…! It would turn you into a superhuman one-man-army for 2 hours! <3 storage caseMonday July 4 – Day 64:
Updated log for a few hours. I then began the preparations for a trip to extract the armor cache, I had dug down a year ago in July 2010. I am really concerned that someone has somehow found the cache. It would be a significant setback if that was to be the case. Or what if moisture had somehow penetrated the pelican case I used. It would be possible considering the fact that the area where the cache is located has permafrost during winter.

I did not look forward to this extraction trip as I had nightmarish memories from digging down the case in the first place, 12 months ago. The location is in a mosquito infested area and combined with the labor intensive nature of this sub mission, I remember it as a painfully exhausting and dreadful experience.

After packing the necessary supplies for the trip, I went by a hunting store and purchased upgraded ammunition (200 SP rounds, costing 300 euro) for my .223 Ruger Mini 14.

Semi-automatic assault rifle he called Gungnir

After a few hours driving I reached the destination. It took me around 30 minutes to locate the grave as I had camouflaged the dig sight very thoroughly, covering it with tree stumps etc. As expected, there was a big welcoming party waiting for me… Oh my, apparently, due to their great feast a year ago the mosquito population had seemed to triple for that particular spot… To counter this, I wore a raincoat which served to protect me from insect bites. However, laboring intensively in an air tight raincoat is extremely painful, even dangerous. I generated at least 2L of sweat by the time I was done so I had to constantly hydrate from my camel back. After two and a half painful hours I had extracted the armor crate and its content. Considering the fact that I do not have a secondary pistol, I disregarded filling up the crate with survival gear which was the original plan.

As for the content of the crate, it was in perfect condition. Not a single drop of liquid had penetrated the crate and no moisture had entered the rubber seal whatsoever. This means that one can bury electronic devices as well without it being affected at all!!! 🙂 These Pelican cases are simply amazing for this purpose. I’m sure you can bury it for several years, even below permafrost, perhaps up to 10 years, before the rubber seal rots away. I’m very impressed!

I arrived at the farm late in the evening. My neighbor had started harvesting my crops, as was the agreement made earlier.

Tuesday July 5 – Day 65:
Spent a few hours on ammunition administration. Replaced most of the .223 HP (hollow point) rounds with SP rounds. According to my research; HP rounds for .223 tend, 80-90% of the time, to not mushroom as intended, which defeats much of their purpose. SP (soft point) on the other hand, at least for the .223 caliber, are more suitable for the purpose of inflicting maximum damage to vermin. I did other practical tasks this day including coloring some of my equipment black with permanent markers of various sizes. Emptied the armor case. Lol, I forgot I had put a batch of DBOL, winstrol and ECA stack in the case :-). Nice, now I don’t have to make more ECA stack tabs from scratch.

I realize that if I am apprehended with all this equipment I will have serious problems trying to explain its intended usage…

Wednesday July 6 – Day 66:
Changed the tertiary charge setup, and planned the last manufacturing phase accordingly in regards to ANALFO mixing. I will be creating 19 x 50kg bags containing 43kg of ANFO, 6.45kg of AL (15%) and 1.2kg of micro balloons (2.7%). After that I will create 13 x 50kg bags containing 46kg of ANFO, 2.3kg of AL (5%) and 1.2kg of MB (2-3%). Re-located most of the ANFO from the spider cave to the processing bench.

Thursday July 7 – Day 67:
Re-distributed the micro balloons from the 16kg bags into 13 individual plastic bags each containing 1.2kg. Prepared 35 such bags – equivalent to 2.5% of the 50kg fertilizer bags. Started to do the same with the aluminium powder, re-distributing them from the 36kg metal drums to individual plastic bags each containing 6kg. Finished 6 such bags, but after further consideration I will use 5kg instead of 6. I realize now that many of the warnings concerning aluminum powder is nothing more than scare mongering, probably to limit the legal liability of the producer. It is much safer to handle than people might expect, even in the micro fine 400 mesh (63 microns) powder I have. I have generated multiple clouds of aluminium and nothing has gone wrong. Just be very careful and you’ll be fine.

As I was working on weighing the micro balloons on my gram weight, using my 3M full face mask, I noticed an itch on my nose. That’s when I saw a large black beetle on the inside of the mask…FFS. Freaked me out. I usually check for insects every time I wear gloves or the mask, but I must have missed it this time.

The neighbor is still harvesting my field outside. He originally told me it would only take 6 hours total but it’s the third day now… As long as he is lurking around on my property he is going to slow me down significantly as I have to take extra security precautions. Not to mention I have to delay the nitro methane evaporation outside until he’s done. I could probably have done it inside, but considering the fact that methane forms potentially explosive/flammable vapors I’m not readily keen on evaporating the RC fuel inside.

Friday July 8 – Day 68:
I opened the remaining two aluminium drums and re-distributed the content in plastic bags (regular shopping bags). I then completed to weigh the content of the bags on a gram weight resulting in 18 bags a 5kg (10-12%), 10 bags a 2.35kg (5-6%) and finally two bags a 6.5 kg for the inner drum charge.

Saturday July 9 – Day 69:
I started mixing the ANFO with the micro balloons and the aluminium powder. I completed 2 bags a 50kg. It was very labor intensive, much more than I imagined as I had to first open the ANFO bags, then distribute 12.5kg of the content into a plastic 50L masonry bucket. I then poured the content into a plastic 100L masonry bucket. As much of the ANFO was packed into hard lumps I had to crush them with a rubber hammer. I then started to crush the smaller lumps with my hands until the ANFO was powdered. I then poured 25% of the micro balloon bag inside the bucket and mixed it (it will create clouds of micro balloon dust as you mix it), following by doing the same with the aluminium powder. Clouds of aluminum powder will be generated and the whole area will be covered in AL dust including your clothing, your hair, and every item you might have in a 5m radius. This is problematic as you end up spread AL dust everywhere as you walk around. I ended up assigning “mixing clothing and shoes” which I took off every time I left the room. It’s the only thing you can do to prevent spreading it somewhat but you will still get stained by AL. I considered using a hazmat suit or my different kind of lightweight dust suit but the problem is that it gets too hot when combined with intensive labor like mixing.

As the ANALFO mix was complete I then poured the mix into an empty 50kg fertilizer bag. This took 30 minutes so processing a full 50kg bag of ANFO creating ANALFO took 2 hours. After I had prepared 2.5 bags of ANALFO I was exhausted and decided to take a break. Mixing ANALFO is very messy and it’s especially annoying that you get aluminium dust everywhere.

Later that day while I was enjoying a meal, the neighbor stopped by. As I had just completed the mixing session I still had AL stains in my face and powder in my hair. I tried the best I could to quickly wash it off but my hair still had a silver tone and it looked very weird. The neighbor asked if he could fertilize my fields and remove some rocks as this would increase the yield of animal fodder by 100% (the current crop). As this meant that he would get several people to work on my property for a week’s time I declined telling him that I had plans of my own.

Later that day, while I was watching an episode of True Blood, I saw a large van driving by the house and parking next to my car. There were at least 4 people inside. Nice, I thought; it’s probably a SWAT team coming to skull-fuck me. The farmer must have tipped them off… Thank God, it was only 4 Polacks looking for worked and I sent them on their way. It would have been tempting to hire them to mix my ANALFO… <3, hadn't it been for the fact that they would have understood what was up 🙂 Later that evening I put a large plastic container box with 8L of 30% nitro methane/18% oil/52% methanol outside to test the evaporation method. Theoretically; the methanol should evaporate before the nitromethane starts to evaporate. As such; you just let the mix evaporate down from 8L to aproximately 4L. This should leave you with aprox 60% nitro and 36% oil which is, according to my sources, 100% more efficient as an oxidizer as diesel when mixed with ANFO or ANALFO. According to my source; 25-40% nitro is as efficient as diesel, so anything higher purity is better. Sunday July 10 – Day 70:
I mixed one more bag of ANALFO manually. There must be a better way than this… One single bag in 2 hours!? I will try to use my electrical concrete mixer instead. I bought it second hand for 150 euro. I am just very worried about three things when using a concrete mixer; the friction caused by the electrical stirrer, ANALFO/ANFO/AL in direct contact with metal, a spark from the electrical system. As these three factors can cause a detonation, I will keep my glock 34 close by in case I somehow survive an explosion… I feel I don’t have a choice as mixing manually is just too fatiguing and time consuming. I need a method that allows me to mix at least 1 x 50kg bag every hour or faster. In any case; let me die another day…

The use of my electrical concrete mixer to blend the ANALFO went without much complication. As usual, I worry too much about safety… <3 I poured in 46kg of ANFO and activated the mixer. The large and small lumps would not be crushed so I had to crush them with my hands manually. I then went on to mixing in the 1.2 kg of micro balloons and the 5kg of aluminium powder (400 mesh/63 microns, leafed). It generated significant AL dust clouds and it didn't mix optimally. However, I was able to complete one bag of ANALFO in 90 minutes so I was able to improve my blending per bag by 30 minutes compared to the manual method. Also, using the concrete mixer is much less fatiguing. Perhaps with time, I will be able to reduce this to 60 minutes per bag. In any case; it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done. My RC fuel (30% nitro methane, 18% oil, 52% methanol) has been allowed to evaporate for 26 hours now (average 20-25C daytime, 10-15C nighttime) and the mix has now reduced its mass by 50%, from 7.8 liters to 3.9 liters. I poured the liquid into a 4L container. I noticed that the evaporation took considerable longer during the night. I'm a bit concerned regarding the exothermic nature of methanol. Methanol absorbs moisture from the air and the water it absorbs has the same evaporation temperature as nitro methane. I have been unable to research exactly how much the absorption ratio is compared to the evaporation ratio as little information is found online regarding this purification method. If my assumptions are grossly incorrect, and the research I found was false, I will end up with an inert goo which will ruin the detonation completely. If I'm right, however, the oxidizer I will end up with will be more than twice as powerful than diesel and will reduce the need for a booster to detonate the ANFO/ANALFO. The inner charge I will end up with will be 50kg of ANALNM (Ammonium Nitrate ALuminium Nitro Methane). Regarding the purification of RC fuel; I did however find dozens of distillation methods from advanced to less advanced but the problem is that you need a decent distillation rig and even if you have the equipment, it is quite complicated and very dangerous to isolate the nitro methane that way. According to my overall research regarding nitro methane purification the most pragmatical approach, given my limited resources, is to just do an evaporation purification. I have a total of 72 liters of RC fuel with an average nitro methane percentage of 28%. In any case; I feel I've been really slacking the last week and I really need to step up the pace now. At least now, everything is set so I don't have to research any more techniques and methods. Monday July 11 – Day 71:
Mixing 3 bags (alr done 4)

I reserved a rental car today, from AVIS, the same company I’m already renting my primary car from. There was not enough credit on the card for a deposit so I had to go to the northern town and transfer 2000 euro to it.

energy drinkConsidering the fact that I am currently working on the most dreadful task, I bought a lot of exquisite food and candy today. I really need to recharge my batteries and increase my morale before initiating the ANALFO mixing. Good food and candy is a central aspect of my reward system which keeps me going. It has proven efficient so far. Occasionally, if I’m really not keen on doing a specific sub task, I take a red bull, a shake of noXplode or an ECA stack – to get a jump start before jumping into something I’m not looking forward to – f example extremely lame or labor intensive tasks or tasks involving great risk of injury or death.

I continued to purify, through evaporation, the RC fuel today, pouring 32L into four different plastic containers. I had marked the containers with a permanent marker for 2L, 4L and 8L which allows me to see how many percent it has evaporated. I put one in the outhouse, to test whether inside evap would be better, and three outside. I placed them all in the outhouse before I went to bed to prevent the batches from being ruined in case of rain during the night. I noticed the batch I left in the outhouse (at around 15C) had only evaporated by 1L, in comparison to the others (20-25C) which had evaporated by 3L, which indicates that outside evap is preferable.

The mixing of AL powder and micro balloons with the ANFO is a truly dreadful task. Not only is it extremely messy; it is very labor intensive as well, not to mention that you have to work using the 3M gas mask. I hate this task. It’s the most dreadful job I’ve encountered during the whole operation… However, I’ve finally managed to find a good mixing routine for the ANALFO. Basically; considering the fact that the whole process with mixing is extremely messy, I could not take any smoking breaks or leave the work bench area at all. As soon as I initiate the mixing I literally turn into the tin man…, with a layer of AL dust all over me. As it is really difficult to remove this dust from the surfaces it touches, I end up smearing the stuff on my face (it gets on the inside of my mask when it touches the rubber straps) and on my fingers etc. To keep an acceptable pace I am therefore forced to work without a break for 5 hours (or until I complete 4 x 50kg bags). I’ve managed to reduce the work needed to complete one bag from 1.5 hours to 1.2 hours. The most time consuming aspect are all the ANFO lumps I have to crush manually with my fingers. The electrical cement mixer is really helpful though, and not dangerous to use at all, and will reduce the amount of time spent on each bag by 40 minutes (from 2 hours manually, to 1.2 hours with a cement mixer). I realize this is a vulnerable phase though, as it will be hard to conceal AL dust and hard to clean surfaces with AL smearing.

Tuesday July 12 – Day 72:
Evaporated RC fuel outside and mixed 4 bags (200kg) of ANALFO.

Found a good method to determine nitromethane vs. methanol content:

The boiling point of methanol is aprox 63ªC while the BP of nitromethane is aprox 100ªC. However, there is an even easier way to determine NM content. Just weigh it! Methanol is extremely light and nitromethane extremely heavy.

Methanol = 800g per liter
Motor oil = 875g per liter (might be wrong)
Nitromethane = 1195g per liter
(Water = 1000g per liter)

A gallon of Methanol = 3.78L * 800 = 3024g
A gallon of Motor Oil = 3.78L * 875 = 3307.5g
A gallon of Nitromethane = 3.78L * 1195 = 4517g
(A gallon of water = 3.78L * 1000 = 3780g)

I added water just in case due to the exothermic nature of methanol (it absorbs water/moisture from the air). In any case; it will now be easier to figure out which of my completed 8 batches of purified RC fuel has the highest NM content, simply by using a gram weight.

Wednesday July 13 – Day 73:
I cleaned my 3M gas mask today. It was full of AL powder/smearing and the multifilter were full of AL dust. Unfortunately; these are my last multifilters (particle and vapor filter combined) so I can’t replace them. I do have a couple of sets of particle filters but I believe they won’t be of much use to filter the diesel fumes when mixing ANALFO.

Continued to evaporate RC fuel outside and mixed 2 bags of ANALFO. After mixing the second bag I began to experience dizziness, blood pressure elevation and nausea, classical symptoms of excessive short-term exposure of diesel. Diesel is a vicious substance as it is absorbed even through most glove material. Nitrile gloves are best, neoprene somewhat good but vinyl gloves provide little or no protection. At this point in time, the clothing I am using to mix ANALFO are more or less soaked in diesel and I knew it was not healthy. But the problem is that using a hazmat suit for mixing is problematic as it will be very hard to labor while wearing it. I have another chemical suit that are more comfortable than the hazmat suit so I will try using that for the last batch. Diesel poisoning isn’t lethal, but will weaken your body over time. However, excessive exposure over a long period of time can shut down your kidneys, which will obviously be lethal. To somewhat counter all the crap I’ve been exposed to the last two months I’m using anti-toxin tabs (herbal supplements strengthening the liver and kidneys), protein supplements, creatine and a multitude of mineral/vitamin supplements.

Thursday July 14 – Day 74:
I’m not feeling so hot today. I’m in a weakened state atm. most likely due to diesel poisoning. It shouldn’t take more than 24 hours before my immune system has defeated the negative effects of this exposure. I hope I haven’t been overexposed as it may lead to acute kidney shutdown. Needless to say; I’m going to use my protective suit to mix the last 4 bags today. Finished the last 4 bags. Using the protective suit (fertilizer sprayer suit, used by farmers) proved to be better than expected, except the fact that I completely soaked my t-shirt and boxer with sweat by the time I was done.

Rental vanPlanning a train trip to the capitol tomorrow. I have to get up at around 06:00 tomorrow. Will do some errands while I’m there including picking up a van from AVIS car rental company (carrying cap 1340kg).

Damn, I was hoping the last 4 batches of RC fuel would be finished before the trip tomorrow.

Total weight of ANALFO, 18 bags = 900kg + 50kg ANALNM (inner charge) + 130kg (1 person + gear) + 80kg (mini MC) = 1160kg. The max carrying capacity of Volkswagen Crafter is 1340kg but it’s safer to leave a certain safety margin, just in case.

Friday July 15 – Day 75:
I took the train to the capitol today to pick up the car I had reserved. Took a taxi from the train station to the car rental company. Came back to the farm late in the evening.

Saturday July 16 – Day 76:
Took a taxi to the train station in the northern town to pick up the car. Did some errands and went back to the farm. Started removing the car rental sticker with the rubber-eraser-drill-bit. I had bought 4 of these specialty drill erasers which are designed to remove decor from cars. I used one and a half bit before I was done but there were significant traces left on the car. I treated the surface with a spray on de-greasing chemical three times but there were still some quite noticeable traces left. Will try a couple of more times tomorrow. Finished the last evaporation-purification of the RC fuel.

Sunday July 17 – Day 77:
Continued removing traces of the decor on the rental car. Washed twice with acetone then another round of degreasing. There are still significant traces but at this point I do not have time to take additional measures.

An unknown car drove in to the front yard today. As I went out to greet them I noticed it was just two women who had taken a wrong turn.

The neighbor started collecting the animal-fodder-balls from the field today. His activities delayed my work for several hours.

I weighed the 9 batches of purified RC fuel. I have a lot more than I need so I will just use two of the best batches.

Weighing 1.8L in a 2L beaker on a gram weight:

Batches 1-4 were evaporated from: 25% nitro, 12% oil, 63% methanol from 7.8L to 3L

Batches 5-9 were evaporated from 30% nitro, 18% oil, 52% methanol, from 7.8L to 3.9L

All the batches have an unknown water content (exothermic properties of methanol ftl.)

Batch 1: 1759g
Batch 2: 1753g
Batch 3: 1738g
Batch 4: 1730g
Batch 5: 1786g
Batch 6: 1779g
Batch 7: 1784g
Batch 8: 1771g
Batch 9: 1770g

Weight tests were somewhat inconclusive so decided to do an additional fire test, taking 20ml from the best batches and using a stop watch to see how long the flame burns.

Batch 1: 1:49 min Batch 5: 1:53 min

Fire test proved somewhat inconclusive but my gut feeling tells me that I should go for batch 5 and batch 7. It should be more than 50% nitromethane in the two batches.

Will create secondary detonator to be detonated from ANALFO, without booster in addition to the detonator with booster from the ANALNM inner charges). Will add a delay fuse of +30 sec for the secondary detonator. I feel this is the safest option if somehow the ANALNM mix proves to be a disaster.

Needless to say, I’m really not sure about the potency of the RC nitro oxidizer. My calculations indicate that the nitro content can be as low as 30% but I cannot confirm this as my weight estimate for the oil might be incorrect. In addition; I cannot verify the water content of the mix.

In any case; for the ANALNM material I will go for:

38kg AN 6L RC/nitro oxidizer 6kg AL 1.2kg MB

Total: 51.2kg of material

Monday July 18 – Day 78:
I completed the inner charge. However, the drum only had enough space for approximately 40kg of ANALNM. I poured the finished product into 2 x double plastic bags, the inner bags of the 50kg fertilizer bags. There were no problems at all mixing everything together in the concrete mixer. However, since I only made one inner charge I wish I had purchased pure AN (98%) from ice packs as it would be more potent than the 27-0-0 (85%ish) – farmer (C)AN.

Will have less time to update log from now on…

That night, after dark, I loaded in everything in the van. Still need to strap it properly in place though.

Tested gear.

Exhausted!!! Good workout though. I’m drinking 4 x protein shakes per day now to maximize muscle generation. At this point in time I should be fearful, but I’m just too exhausted to think much about it.

Placed PA to dry during the night.

Tuesday July 19 – Day 79:
Dried 1 out of 4 batches of PA/DDNP in the oven at 50-70ª C. First batch took 9 hours, wtf!! This is going to delay everything… Created anti-friction/shock stuffing by cutting up a madras and placing it in three layers in a card board box. I’ll use these to transport the booster and detonators separate from the main cargo.

Started packing down gear, filled diesel/gasoline on cars and mini-MC. Tested mini-MC. Treaded a fuse inside a surgical tube and tested it. There were 75 cm of fuse so it should burn for 75 seconds.

Due to the lack of oxygen in the tube it burnt in less than 2 sec!! Damn, I’m glad I checked this beforehand… No surgical tube then…

ephedrineWent to a higher quality restaurant in the southern town and feasted. Yummy! Ive been working extremely hard the last few days and I’m completely exhausted. I have been using ECA stack to help keep this pace. Looks like I will have to take one more today…

Currently drying batch 2 out of 4. Hopefully I will complete it before I go to bed.

Dry PA etc. Test PA. Pack and load gear during day, Go to sleep at 22:00

06:30 – drive 1 Small, there 10:00 train back (11:00), there 14:00, taxi, there 14:30 drive 2. (there 17:00) Check area. Go to bed 18:30

Wednesday July 20 – Day 80:
Wake up at 02:30. Start downloading movie at 02:30, 05:30 Eat + pack, start seeding at 06:00. Done 08:30. Leave 08:30 Drive 1, Back 09:30 Drive 2 There 10:00 Leave There 10:45

Thursday July 21 – Day 81:
Drive 11 hours straight to Kautokeino, sort out cheap hotel

Friday July 22 – Day 82:
Initiate blasting sequences at pre-determined sites. Test dirt for gram of gold per kg. Have enough material for at least 20 blasts. Start capitalization of project as soon as I have results. Time is running out, liquidity squeeze inc. Call/email all my investor contacts with updated online prospectus/pdf.

This is going to be an all-or-nothing scenario. If I fail to generate acceptable precious metals yields, in combination with swift initiation of the capitalization for securing the areas I will be heavily indebted. I must complete capitalization of the mineral extraction project within August at latest! When I have the required seed capital I will have enough funds to employ the services of professional blasting engineers.

If all fails, I will initiate my career with a private security firm in conflict zones to acquire maximum funds in the shortest period of time to repay the debts.

First coming costume party this autumn, dress up as a police officer. Arrive with insignias 🙂 Will be awesome as people will be very astonished 🙂

Side note; imagine if law enforcement would visit me the next days. They would probably get the wrong idea and think I was a terrorist, lol :o)

Optimal time budget, one person –
ANFO: 3 x 600kg, PA: 3 x 0,5kg, DDNP: 3 x 10g

If I had known then, what I know today, by following this guide, I would have managed to complete the operation within 30 days instead of using almost 80 days. By following my guide, anyone can create the foundation for a spectacular operation with only 1 person in less than a month even if adding 2 “resting” days! 🙂

Day 1: Moving and getting your equipment and gear into place.
Day 2: Installing all equipment – fume hood, fan etc.
Day 3: Finishing the metal skeletons/cylinders for the blast devices and completing other practical issues relating to gear and equipment.
Day 4: Creating an evacuation/emergency strategy, packing an evacuation kit (survival gear etc.)
Day 5: Grinding 2.5kg of aspirin: 30 minutes with blender, manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 6: Manufacture of acetylsalicylic acid from aspirin (4 hours) + drying in oven (4 hours per batch x 3)
Day 7: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 8: Boiling sulfuric acid using 4 cooking plates outside, from 23:00-07:00, 15-18L->5L of 90% +
Day 9: Creating Picric Acid (6 out of 12 batches using 3 x hot plate stirrers)
Day 10: Creating Picric Acid (12 out of 12 batches using 3 x hot plate stirrers). Completed
Day 11: Purification of Picric Acid
Day 12: Purification of Picric Acid
Day 13: Purification of Picric Acid. Completed
Day 14: Creating DDNP
Day 15: Creating DDNP. Completed
Day 16: Relocation of 27-0-0 fertilizer. Break down a 600kg bag into 13-14 x 50kg bags, load in the truck, drive to location where you are going to crush them if needed.
Day 17: Relocation of fertilizer. Break down another 600kg bag into 13-14 x 50kg bags.
Day 18: Relocation of fertilizer. Break down the last 600kg bag into 13-14 x 50kg bags.
Day 19: Initiate fertilizer grinding phase using 4 stationary blenders simultaneously. It will take aprox. 30-40 minutes to complete a full 50kg bag of ANFO, including the addition of the diesel and sealing the inner and outer bag with pieces of duct tape. It should be done nighttime between 23:00-07:00 as it’s quite noisy. The task also includes filling 20L plastic containers with diesel, and then breaking each 20L container down to 4L containers (empty distilled water containers) Complete 9 x 50kg bags of ANFO.
Day 20: Complete 9 x 50kg bags of ANFO.
Day 21: Complete 9 x 50kg bags of ANFO.
Day 22: Complete 9 x 50kg bags of ANFO. Completed.
Day 23: Mix in 2.5% (by weight) micro balloons and 10-15% (by weight) aluminium powder into the now hardened ANFO.
Day 24: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 25: Mix in 2.5% micro balloons and 10-15% aluminium powder into the now hardened ANFO.
Day 26: Prepare trucks for transportation.
Day 27: Prepare trucks for transportation.
Day 28: Prepare trucks for transportation.
Day 29: Completed

The following chart illustrates labor required vs. risk of apprehension for individuals who are NOT already on any watch list.

Risk vs. Labor Time required to complete Risk of apprehension
1 person 30 days 30%
2 person 20 days 60%
3 person 16 days 80%
4 person 13 days 90%
5 person 12 days 90-95%

 
 
The old saying; “if you want something done, then do it yourself” is as relevant now as it was then. More than one “chef” does not mean that you will do tasks twice as fast. In many cases; you could do it all yourself, it will just take a little more time. AND, without taking unacceptable risks. The conclusion is undeniable.

I believe this will be my last entry. It is now Fri July 22nd, 12:51.

Sincere regards,

Andrew Berwick
Justiciar Knight Commander
Knights Templar Europe
Knights Templar Norway

In another section, Breivik anticipated the aftermath of his deed:

I have been thinking about my post-operational situation, in case I survive a successful mission and live to stand a multiculturalist trial. When I wake up at the hospital, after surviving the gunshot wounds inflicted on me, I realize at least for me personally, I will be waking up to a world of shit, a living nightmare. Not only will all my friends and family detest me and call me a monster; the united global multiculturalist media will have their hands full figuring out multiple ways to character assassinate, vilify and demonize. They will possibly do everything they can to distort the truth about me, KT and our true objectives, and attempt to make even revolutionary conservatives detest me. They will label me as a racist, fascist, Nazi-monster as they usually do with everyone who opposesmulticulturalism/cultural Marxism. However, since I manifest their worst nightmare (systematical and organized executions of multiculturalist traitors), they will probably just give me the full propaganda rape package and propagate the following accusations: pedophile, engaged in incest activities, homosexual, psycho, ADHD, thief, non-educated, inbred, maniac, insane, monster etc. I will be labeled as the biggest (Nazi-)monster ever witnessed since WW2.

I have an extremely strong psyche (stronger than anyone I have ever known) but I am seriously contemplating that it is perhaps biologically impossible to survive the mental, perhaps coupled with physical torture, I will be facing without completely breaking down on a psychological level. I guess I will have to wait and find out.

Homophobic violence in Mexico threatens a youth culture sub-group- The Emos

There is a wave of homophobic violence currently rolling across Mexico against a youth sub-culture group called ‘Emos’, short for ‘Emotionals’. A quick look at youtube.com shows video after video in Spanish threatening these young teenagers with violence, usually for being considered effiminate and weak. You tube should be ashamed to allow this hate material to clog up its network as it is currently allowing.

Several violent attacks have occurred against EMO teenagers across Mexico and the Mexican federal government has had to step in. One gets the idea though that it is more to protect their tourism industry than for any other reason. This government is not known for its promotion of tolerance and multi-culturalism, with the ruling party, the PAN itself, having a long history of homophobic rhetoric employed in its political campaigns.

One notable feature of this wave of homophobic violence in Mexico, was the encouragement by the semi official Mexican TV network, Televisa, in the initial attacks against Emos, but now the realization that this wave of Nazi like behavior might actually hurt Mexico’s international image has braked their zeal for abusing young teenagers. What a cowardly media Mexico has! It reminds one of Fox News right here in the US.

See Mexico’s Emo-Bashing Problem for some reportage in the US of this situation.

Industrial Society and Its Future

Theodore Kaczynski the UnabomberUnabomber Ted Kaczynski on how to get published (paragraph 96):
 
“If we had never done anything violent and had submitted the present writings to a publisher, they probably would not have been accepted. … In order to get our message before the public with some chance of making a lasting impression, we’ve had to kill people.”

On technology delivering mankind from menial labor:

“It has been suggested, for example, that a great development of the service industries might provide work for human beings. Thus people will spend their time shining each others shoes, driving each other around in taxicabs, making handicrafts for one another, waiting on each other’s tables, etc. “ (para. 176)

On genetic engineering:

“If you think that big government interferes in your life too much now, just wait till the government starts regulating the genetic constitution of your children. Such regulation will inevitably follow the introduction of genetic engineering of human beings, because the consequences of unregulated genetic engineering would be disastrous. … Just think—an irresponsible genetic engineer might create a lot of terrorists.” (para. 123, note 19)

For archival purposes, here is the 1995 “UNABOMBER MANIFESTO.”

Industrial Society and Its Future

Introduction

1.
The Industrial Revolution and its consequences have been a disaster for the human race. They have greatly increased the life-expectancy of those of us who live in “advanced” countries, but they have destabilized society, have made life unfulfilling, have subjected human beings to indignities, have led to widespread psychological suffering (in the Third World to physical suffering as well) and have inflicted severe damage on the natural world. The continued development of technology will worsen the situation. It will certainly subject human beings to greater indignities and inflict greater damage on the natural world, it will probably lead to greater social disruption and psychological suffering, and it may lead to increased physical suffering—even in “advanced” countries.

2.
The industrial-technological system may survive or it may break down. If it survives, it may eventually achieve a low level of physical and psychological suffering, but only after passing through a long and very painful period of adjustment and only at the cost of permanently reducing human beings and many other living organisms to engineered products and mere cogs in the social machine. Furthermore, if the system survives, the consequences will be inevitable: there is no way of reforming or modifying the system so as to prevent it from depriving people of dignity and autonomy.

3.
If the system breaks down the consequences will still be very painful. But the bigger the system grows the more disastrous the results of its breakdown will be, so if it is to break down it had best break down sooner rather than later.

4.
We therefore advocate a revolution against the industrial system. This revolution may or may not make use of violence: it may be sudden or it may be a relatively gradual process spanning a few decades. We can’t predict any of that. But we do outline in a very general way the measures that those who hate the industrial system should take in order to prepare the way for a revolution against that form of society. This is not to be a political revolution. Its object will be to overthrow not governments but the economic and technological basis of the present society.

5.
In this article we give attention to only some of the negative developments that have grown out of the industrial-technological system. Other such developments we mention only briefly or ignore altogether. This does not mean that we regard these other developments as unimportant. For practical reasons we have to confine our discussion to areas that have received insufficient public attention or in which we have something new to say. For example, since there are well-developed environmental and wilderness movements, we have written very little about environmental degradation or the destruction of wild nature, even though we consider these to be highly important.

The psychology of modern leftism

6.
Almost everyone will agree that we live in a deeply troubled society. One of the most widespread manifestations of the craziness of our world is leftism, so a discussion of the psychology of leftism can serve as an introduction to the discussion of the problems of modern society in general.

7.
But what is leftism? During the first half of the 20th century leftism could have been practically identified with socialism. Today the movement is fragmented and it is not clear who can properly be called a leftist. When we speak of leftists in this article we have in mind mainly socialists, collectivists, “politically correct” types, feminists, gay and disability activists, animal rights activists and the like. But not everyone who is associated with one of these movements is a leftist. What we are trying to get at in discussing leftism is not so much a movement or an ideology as a psychological type, or rather a collection of related types. Thus, what we mean by “leftism” will emerge more clearly in the course of our discussion of leftist psychology. (Also, see paragraphs 227-230.)

8.
Even so, our conception of leftism will remain a good deal less clear than we would wish, but there doesn’t seem to be any remedy for this. All we are trying to do is indicate in a rough and approximate way the two psychological tendencies that we believe are the main driving force of modern leftism. We by no means claim to be telling the whole truth about leftist psychology. Also, our discussion is meant to apply to modern leftism only. We leave open the question of the extent to which our discussion could be applied to the leftists of the 19th and early 20th century.

9.
The two psychological tendencies that underlie modern leftism we call “feelings of inferiority” and “oversocialization.” Feelings of inferiority are characteristic of modern leftism as a whole, while oversocialization is characteristic only of a certain segment of modern leftism; but this segment is highly influential.

Feelings of inferiority

10.
By “feelings of inferiority” we mean not only inferiority feelings in the strict sense but a whole spectrum of related traits; low self-esteem, feelings of powerlessness, depressive tendencies, defeatism, guilt, self-hatred, etc. We argue that modern leftists tend to have some such feelings (possibly more or less repressed) and that these feelings are decisive in determining the direction of modern leftism.

11.
When someone interprets as derogatory almost anything that is said about him (or about groups with whom he identifies) we conclude that he has inferiority feelings or low self-esteem. This tendency is pronounced among minority rights activists, whether or not they belong to the minority groups whose rights they defend. They are hypersensitive about the words used to designate minorities and about anything that is said concerning minorities. The terms “negro,” “oriental,” “handicapped” or “chick” for an African, an Asian, a disabled person or a woman originally had no derogatory connotation. “Broad” and “chick” were merely the feminine equivalents of “guy,” “dude” or “fellow.” The negative connotations have been attached to these terms by the activists themselves. Some animal rights activists have gone so far as to reject the word “pet” and insist on its replacement by “animal companion.” Leftish anthropologists go to great lengths to avoid saying anything about primitive peoples that could conceivably be interpreted as negative. They want to replace the world “primitive” by “nonliterate.” They seem almost paranoid about anything that might suggest that any primitive culture is inferior to our own. (We do not mean to imply that primitive cultures are inferior to ours. We merely point out the hypersensitivity of leftish anthropologists.)

12.
Those who are most sensitive about “politically incorrect” terminology are not the average black ghetto-dweller, Asian immigrant, abused woman or disabled person, but a minority of activists, many of whom do not even belong to any “oppressed” group but come from privileged strata of society. Political correctness has its stronghold among university professors, who have secure employment with comfortable salaries, and the majority of whom are heterosexual white males from middle- to upper-middle-class families.

13.
Many leftists have an intense identification with the problems of groups that have an image of being weak (women), defeated (American Indians), repellent (homosexuals) or otherwise inferior. The leftists themselves feel that these groups are inferior. They would never admit to themselves that they have such feelings, but it is precisely because they do see these groups as inferior that they identify with their problems. (We do not mean to suggest that women, Indians, etc. are inferior; we are only making a point about leftist psychology.)

14.
Feminists are desperately anxious to prove that women are as strong and as capable as men. Clearly they are nagged by a fear that women may not be as strong and as capable as men.

15.
Leftists tend to hate anything that has an image of being strong, good and successful. They hate America, they hate Western civilization, they hate white males, they hate rationality. The reasons that leftists give for hating the West, etc. clearly do not correspond with their real motives. They say they hate the West because it is warlike, imperialistic, sexist, ethnocentric and so forth, but where these same faults appear in socialist countries or in primitive cultures, the leftist finds excuses for them, or at best he grudgingly admits that they exist; whereas he enthusiastically points out (and often greatly exaggerates) these faults where they appear in Western civilization. Thus it is clear that these faults are not the leftist’s real motive for hating America and the West. He hates America and the West because they are strong and successful.

16.
Words like “self-confidence,” “self-reliance,” “initiative,” “enterprise,” “optimism,” etc., play little role in the liberal and leftist vocabulary. The leftist is anti-individualistic, pro-collectivist. He wants society to solve everyone’s problems for them, satisfy everyone’s needs for them, take care of them. He is not the sort of person who has an inner sense of confidence in his ability to solve his own problems and satisfy his own needs. The leftist is antagonistic to the concept of competition because, deep inside, he feels like a loser.

17.
Art forms that appeal to modern leftish intellectuals tend to focus on sordidness, defeat and despair, or else they take an orgiastic tone, throwing off rational control as if there were no hope of accomplishing anything through rational calculation and all that was left was to immerse oneself in the sensations of the moment.

18.
Modern leftish philosophers tend to dismiss reason, science, objective reality and to insist that everything is culturally relative. It is true that one can ask serious questions about the foundations of scientific knowledge and about how, if at all, the concept of objective reality can be defined. But it is obvious that modern leftish philosophers are not simply cool-headed logicians systematically analyzing the foundations of knowledge. They are deeply involved emotionally in their attack on truth and reality. They attack these concepts because of their own psychological needs. For one thing, their attack is an outlet for hostility, and, to the extent that it is successful, it satisfies the drive for power. More importantly, the leftist hates science and rationality because they classify certain beliefs as true (i.e., successful, superior) and other beliefs as false (i.e., failed, inferior). The leftist’s feelings of inferiority run so deep that he cannot tolerate any classification of some things as successful or superior and other things as failed or inferior. This also underlies the rejection by many leftists of the concept of mental illness and of the utility of IQ tests. Leftists are antagonistic to genetic explanations of human abilities or behavior because such explanations tend to make some persons appear superior or inferior to others. Leftists prefer to give society the credit or blame for an individual’s ability or lack of it. Thus if a person is “inferior” it is not his fault, but society’s, because he has not been brought up properly.

19.
The leftist is not typically the kind of person whose feelings of inferiority make him a braggart, an egotist, a bully, a self-promoter, a ruthless competitor. This kind of person has not wholly lost faith in himself. He has a deficit in his sense of power and self-worth, but he can still conceive of himself as having the capacity to be strong, and his efforts to make himself strong produce his unpleasant behavior.[1] But the leftist is too far gone for that. His feelings of inferiority are so ingrained that he cannot conceive of himself as individually strong and valuable. Hence the collectivism of the leftist. He can feel strong only as a member of a large organization or a mass movement with which he identifies himself.

20.
Notice the masochistic tendency of leftist tactics. Leftists protest by lying down in front of vehicles, they intentionally provoke police or racists to abuse them, etc. These tactics may often be effective, but many leftists use them not as a means to an end but because they prefer masochistic tactics. Self-hatred is a leftist trait.

21.
Leftists may claim that their activism is motivated by compassion or by moral principles, and moral principle does play a role for the leftist of the oversocialized type. But compassion and moral principle cannot be the main motives for leftist activism. Hostility is too prominent a component of leftist behavior; so is the drive for power. Moreover, much leftist behavior is not rationally calculated to be of benefit to the people whom the leftists claim to be trying to help. For example, if one believes that affirmative action is good for black people, does it make sense to demand affirmative action in hostile or dogmatic terms? Obviously it would be more productive to take a diplomatic and conciliatory approach that would make at least verbal and symbolic concessions to white people who think that affirmative action discriminates against them. But leftist activists do not take such an approach because it would not satisfy their emotional needs. Helping black people is not their real goal. Instead, race problems serve as an excuse for them to express their own hostility and frustrated need for power. In doing so they actually harm black people, because the activists’ hostile attitude toward the white majority tends to intensify race hatred.

22.
If our society had no social problems at all, the leftists would have to invent problems in order to provide themselves with an excuse for making a fuss.

23.
We emphasize that the foregoing does not pretend to be an accurate description of everyone who might be considered a leftist. It is only a rough indication of a general tendency of leftism.

Oversocialization

24.
Psychologists use the term “socialization” to designate the process by which children are trained to think and act as society demands. A person is said to be well socialized if he believes in and obeys the moral code of his society and fits in well as a functioning part of that society. It may seem senseless to say that many leftists are over-socialized, since the leftist is perceived as a rebel. Nevertheless, the position can be defended. Many leftists are not such rebels as they seem.

25.
The moral code of our society is so demanding that no one can think, feel and act in a completely moral way. For example, we are not supposed to hate anyone, yet almost everyone hates somebody at some time or other, whether he admits it to himself or not. Some people are so highly socialized that the attempt to think, feel and act morally imposes a severe burden on them. In order to avoid feelings of guilt, they continually have to deceive themselves about their own motives and find moral explanations for feelings and actions that in reality have a non-moral origin. We use the term “oversocialized” to describe such people.[2]

26.
Oversocialization can lead to low self-esteem, a sense of powerlessness, defeatism, guilt, etc. One of the most important means by which our society socializes children is by making them feel ashamed of behavior or speech that is contrary to society’s expectations. If this is overdone, or if a particular child is especially susceptible to such feelings, he ends by feeling ashamed of himself. Moreover the thought and the behavior of the oversocialized person are more restricted by society’s expectations than are those of the lightly socialized person. The majority of people engage in a significant amount of naughty behavior. They lie, they commit petty thefts, they break traffic laws, they goof off at work, they hate someone, they say spiteful things or they use some underhanded trick to get ahead of the other guy. The oversocialized person cannot do these things, or if he does do them he generates in himself a sense of shame and self-hatred. The oversocialized person cannot even experience, without guilt, thoughts or feelings that are contrary to the accepted morality; he cannot think “unclean” thoughts. And socialization is not just a matter of morality; we are socialized to conform to many norms of behavior that do not fall under the heading of morality. Thus the oversocialized person is kept on a psychological leash and spends his life running on rails that society has laid down for him. In many oversocialized people this results in a sense of constraint and powerlessness that can be a severe hardship. We suggest that oversocialization is among the more serious cruelties that human beings inflict on one another.

27.
We argue that a very important and influential segment of the modern left is oversocialized and that their oversocialization is of great importance in determining the direction of modern leftism. Leftists of the oversocialized type tend to be intellectuals or members of the upper-middle class. Notice that university intellectuals[3] constitute the most highly socialized segment of our society and also the most left-wing segment.

28.
The leftist of the oversocialized type tries to get off his psychological leash and assert his autonomy by rebelling. But usually he is not strong enough to rebel against the most basic values of society. Generally speaking, the goals of today’s leftists are not in conflict with the accepted morality. On the contrary, the left takes an accepted moral principle, adopts it as its own, and then accuses mainstream society of violating that principle. Examples: racial equality, equality of the sexes, helping poor people, peace as opposed to war, nonviolence generally, freedom of expression, kindness to animals. More fundamentally, the duty of the individual to serve society and the duty of society to take care of the individual. All these have been deeply rooted values of our society (or at least of its middle and upper classes[4]) for a long time. These values are explicitly or implicitly expressed or presupposed in most of the material presented to us by the mainstream communications media and the educational system. Leftists, especially those of the oversocialized type, usually do not rebel against these principles but justify their hostility to society by claiming (with some degree of truth) that society is not living up to these principles.

29.
Here is an illustration of the way in which the oversocialized leftist shows his real attachment to the conventional attitudes of our society while pretending to be in rebellion against it. Many leftists push for affirmative action, for moving black people into high-prestige jobs, for improved education in black schools and more money for such schools; the way of life of the black “underclass” they regard as a social disgrace. They want to integrate the black man into the system, make him a business executive, a lawyer, a scientist just like upper-middle-class white people. The leftists will reply that the last thing they want is to make the black man into a copy of the white man; instead, they want to preserve African American culture. But in what does this preservation of African American culture consist? It can hardly consist in anything more than eating black-style food, listening to black-style music, wearing black-style clothing and going to a black-style church or mosque. In other words, it can express itself only in superficial matters. In all essential respects leftists of the oversocialized type want to make the black man conform to white, middle-class ideals. They want to make him study technical subjects, become an executive or a scientist, spend his life climbing the status ladder to prove that black people are as good as white. They want to make black fathers “responsible.” They want black gangs to become nonviolent, etc. But these are exactly the values of the industrial-technological system. The system couldn’t care less what kind of music a man listens to, what kind of clothes he wears or what religion he believes in as long as he studies in school, holds a respectable job, climbs the status ladder, is a “responsible” parent, is nonviolent and so forth. In effect, however much he may deny it, the oversocialized leftist wants to integrate the black man into the system and make him adopt its values.

30.
We certainly do not claim that leftists, even of the oversocialized type, never rebel against the fundamental values of our society. Clearly they sometimes do. Some oversocialized leftists have gone so far as to rebel against one of modern society’s most important principles by engaging in physical violence. By their own account, violence is for them a form of “liberation.” In other words, by committing violence they break through the psychological restraints that have been trained into them. Because they are oversocialized these restraints have been more confining for them than for others; hence their need to break free of them. But they usually justify their rebellion in terms of mainstream values. If they engage in violence they claim to be fighting against racism or the like.

31.
We realize that many objections could be raised to the foregoing thumb-nail sketch of leftist psychology. The real situation is complex, and anything like a complete description of it would take several volumes even if the necessary data were available. We claim only to have indicated very roughly the two most important tendencies in the psychology of modern leftism.

32.
The problems of the leftist are indicative of the problems of our society as a whole. Low self-esteem, depressive tendencies and defeatism are not restricted to the left. Though they are especially noticeable in the left, they are widespread in our society. And today’s society tries to socialize us to a greater extent than any previous society. We are even told by experts how to eat, how to exercise, how to make love, how to raise our kids and so forth.

The power process

33.
Human beings have a need (probably based in biology) for something that we will call the “power process.” This is closely related to the need for power (which is widely recognized) but is not quite the same thing. The power process has four elements. The three most clear-cut of these we call goal, effort and attainment of goal. (Everyone needs to have goals whose attainment requires effort, and needs to succeed in attaining at least some of his goals.) The fourth element is more difficult to define and may not be necessary for everyone. We call it autonomy and will discuss it later (paragraphs 42-44).

34.
Consider the hypothetical case of a man who can have anything he wants just by wishing for it. Such a man has power, but he will develop serious psychological problems. At first he will have a lot of fun, but by and by he will become acutely bored and demoralized. Eventually he may become clinically depressed. History shows that leisured aristocracies tend to become decadent. This is not true of fighting aristocracies that have to struggle to maintain their power. But leisured, secure aristocracies that have no need to exert themselves usually become bored, hedonistic and demoralized, even though they have power. This shows that power is not enough. One must have goals toward which to exercise one’s power.

35.
Everyone has goals; if nothing else, to obtain the physical necessities of life: food, water and whatever clothing and shelter are made necessary by the climate. But the leisured aristocrat obtains these things without effort. Hence his boredom and demoralization.

36.
Nonattainment of important goals results in death if the goals are physical necessities, and in frustration if nonattainment of the goals is compatible with survival. Consistent failure to attain goals throughout life results in defeatism, low self-esteem or depression.

37.
Thus, in order to avoid serious psychological problems, a human being needs goals whose attainment requires effort, and he must have a reasonable rate of success in attaining his goals.

Surrogate activities

38.
But not every leisured aristocrat becomes bored and demoralized. For example, the emperor Hirohito, instead of sinking into decadent hedonism, devoted himself to marine biology, a field in which he became distinguished. When people do not have to exert themselves to satisfy their physical needs they often set up artificial goals for themselves. In many cases they then pursue these goals with the same energy and emotional involvement that they otherwise would have put into the search for physical necessities. Thus the aristocrats of the Roman Empire had their literary pretensions; many European aristocrats a few centuries ago invested tremendous time and energy in hunting, though they certainly didn’t need the meat; other aristocracies have competed for status through elaborate displays of wealth; and a few aristocrats, like Hirohito, have turned to science.

39.
We use the term “surrogate activity” to designate an activity that is directed toward an artificial goal that people set up for themselves merely in order to have some goal to work toward, or let us say, merely for the sake of the “fulfillment” that they get from pursuing the goal. Here is a rule of thumb for the identification of surrogate activities. Given a person who devotes much time and energy to the pursuit of goal X, ask yourself this: If he had to devote most of his time and energy to satisfying his biological needs, and if that effort required him to use his physical and mental facilities in a varied and interesting way, would he feel seriously deprived because he did not attain goal X? If the answer is no, then the person’s pursuit of a goal X is a surrogate activity. Hirohito’s studies in marine biology clearly constituted a surrogate activity, since it is pretty certain that if Hirohito had had to spend his time working at interesting non-scientific tasks in order to obtain the necessities of life, he would not have felt deprived because he didn’t know all about the anatomy and life-cycles of marine animals. On the other hand the pursuit of sex and love (for example) is not a surrogate activity, because most people, even if their existence were otherwise satisfactory, would feel deprived if they passed their lives without ever having a relationship with a member of the opposite sex. (But pursuit of an excessive amount of sex, more than one really needs, can be a surrogate activity.)

40.
In modern industrial society only minimal effort is necessary to satisfy one’s physical needs. It is enough to go through a training program to acquire some petty technical skill, then come to work on time and exert very modest effort needed to hold a job. The only requirements are a moderate amount of intelligence, and most of all, simple obedience. If one has those, society takes care of one from cradle to grave. (Yes, there is an underclass that cannot take physical necessities for granted, but we are speaking here of mainstream society.) Thus it is not surprising that modern society is full of surrogate activities. These include scientific work, athletic achievement, humanitarian work, artistic and literary creation, climbing the corporate ladder, acquisition of money and material goods far beyond the point at which they cease to give any additional physical satisfaction, and social activism when it addresses issues that are not important for the activist personally, as in the case of white activists who work for the rights of nonwhite minorities. These are not always pure surrogate activities, since for many people they may be motivated in part by needs other than the need to have some goal to pursue. Scientific work may be motivated in part by a drive for prestige, artistic creation by a need to express feelings, militant social activism by hostility. But for most people who pursue them, these activities are in large part surrogate activities. For example, the majority of scientists will probably agree that the “fulfillment” they get from their work is more important than the money and prestige they earn.

41.
For many if not most people, surrogate activities are less satisfying than the pursuit of real goals (that is, goals that people would want to attain even if their need for the power process were already fulfilled). One indication of this is the fact that, in many or most cases, people who are deeply involved in surrogate activities are never satisfied, never at rest. Thus the money-maker constantly strives for more and more wealth. The scientist no sooner solves one problem than he moves on to the next. The long-distance runner drives himself to run always farther and faster. Many people who pursue surrogate activities will say that they get far more fulfillment from these activities than they do from the “mundane” business of satisfying their biological needs, but that it is because in our society the effort needed to satisfy the biological needs has been reduced to triviality. More importantly, in our society people do not satisfy their biological needs autonomously but by functioning as parts of an immense social machine. In contrast, people generally have a great deal of autonomy in pursuing their surrogate activities.

Autonomy

42.
Autonomy as a part of the power process may not be necessary for every individual. But most people need a greater or lesser degree of autonomy in working toward their goals. Their efforts must be undertaken on their own initiative and must be under their own direction and control. Yet most people do not have to exert this initiative, direction and control as single individuals. It is usually enough to act as a member of a small group. Thus if half a dozen people discuss a goal among themselves and make a successful joint effort to attain that goal, their need for the power process will be served. But if they work under rigid orders handed down from above that leave them no room for autonomous decision and initiative, then their need for the power process will not be served. The same is true when decisions are made on a collective basis if the group making the collective decision is so large that the role of each individual is insignificant.[5]

43.
It is true that some individuals seem to have little need for autonomy. Either their drive for power is weak or they satisfy it by identifying themselves with some powerful organization to which they belong. And then there are unthinking, animal types who seem to be satisfied with a purely physical sense of power (the good combat soldier, who gets his sense of power by developing fighting skills that he is quite content to use in blind obedience to his superiors).

44.
But for most people it is through the power process—having a goal, making an autonomous effort and attaining the goal—that self-esteem, self-confidence and a sense of power are acquired. When one does not have adequate opportunity to go throughout the power process the consequences are (depending on the individual and on the way the power process is disrupted) boredom, demoralization, low self-esteem, inferiority feelings, defeatism, depression, anxiety, guilt, frustration, hostility, spouse or child abuse, insatiable hedonism, abnormal sexual behavior, sleep disorders, eating disorders, etc.[6]

Sources of social problems

45.
Any of the foregoing symptoms can occur in any society, but in modern industrial society they are present on a massive scale. We aren’t the first to mention that the world today seems to be going crazy. This sort of thing is not normal for human societies. There is good reason to believe that primitive man suffered from less stress and frustration and was better satisfied with his way of life than modern man is. It is true that not all was sweetness and light in primitive societies. Abuse of women was common among the Australian aborigines, transexuality was fairly common among some of the American Indian tribes. But it does appear that generally speaking the kinds of problems that we have listed in the preceding paragraph were far less common among primitive peoples than they are in modern society.

46.
We attribute the social and psychological problems of modern society to the fact that that society requires people to live under conditions radically different from those under which the human race evolved and to behave in ways that conflict with the patterns of behavior that the human race developed while living under the earlier conditions. It is clear from what we have already written that we consider lack of opportunity to properly experience the power process as the most important of the abnormal conditions to which modern society subjects people. But it is not the only one. Before dealing with disruption of the power process as a source of social problems we will discuss some of the other sources.

47.
Among the abnormal conditions present in modern industrial society are excessive density of population, isolation of man from nature, excessive rapidity of social change and the break-down of natural small-scale communities such as the extended family, the village or the tribe.

48.
It is well known that crowding increases stress and aggression. The degree of crowding that exists today and the isolation of man from nature are consequences of technological progress. All pre-industrial societies were predominantly rural. The industrial Revolution vastly increased the size of cities and the proportion of the population that lives in them, and modern agricultural technology has made it possible for the Earth to support a far denser population than it ever did before. (Also, technology exacerbates the effects of crowding because it puts increased disruptive powers in people’s hands. For example, a variety of noise-making devices: power mowers, radios, motorcycles, etc. If the use of these devices is unrestricted, people who want peace and quiet are frustrated by the noise. If their use is restricted, people who use the devices are frustrated by the regulations… But if these machines had never been invented there would have been no conflict and no frustration generated by them.)

49.
For primitive societies the natural world (which usually changes only slowly) provided a stable framework and therefore a sense of security. In the modern world it is human society that dominates nature rather than the other way around, and modern society changes very rapidly owing to technological change. Thus there is no stable framework.

50.
The conservatives are fools: They whine about the decay of traditional values, yet they enthusiastically support technological progress and economic growth. Apparently it never occurs to them that you can’t make rapid, drastic changes in the technology and the economy of a society without causing rapid changes in all other aspects of the society as well, and that such rapid changes inevitably break down traditional values.

51.
The breakdown of traditional values to some extent implies the breakdown of the bonds that hold together traditional small-scale social groups. The disintegration of small-scale social groups is also promoted by the fact that modern conditions often require or tempt individuals to move to new locations, separating themselves from their communities. Beyond that, a technological society has to weaken family ties and local communities if it is to function efficiently. In modern society an individual’s loyalty must be first to the system and only secondarily to a small-scale community, because if the internal loyalties of small-scale communities were stronger than loyalty to the system, such communities would pursue their own advantage at the expense of the system.

52.
Suppose that a public official or a corporation executive appoints his cousin, his friend or his co-religionist to a position rather than appointing the person best qualified for the job. He has permitted personal loyalty to supersede his loyalty to the system, and that is “nepotism” or “discrimination,” both of which are terrible sins in modern society. Would-be industrial societies that have done a poor job of subordinating personal or local loyalties to loyalty to the system are usually very inefficient. (Look at Latin America.) Thus an advanced industrial society can tolerate only those small-scale communities that are emasculated, tamed and made into tools of the system.[7]

53.
Crowding, rapid change and the breakdown of communities have been widely recognized as sources of social problems. but we do not believe they are enough to account for the extent of the problems that are seen today.

54.
A few pre-industrial cities were very large and crowded, yet their inhabitants do not seem to have suffered from psychological problems to the same extent as modern man. In America today there still are uncrowded rural areas, and we find there the same problems as in urban areas, though the problems tend to be less acute in the rural areas. Thus crowding does not seem to be the decisive factor.

55.
On the growing edge of the American frontier during the 19th century, the mobility of the population probably broke down extended families and small-scale social groups to at least the same extent as these are broken down today. In fact, many nuclear families lived by choice in such isolation, having no neighbors within several miles, that they belonged to no community at all, yet they do not seem to have developed problems as a result.

56.
Furthermore, change in American frontier society was very rapid and deep. A man might be born and raised in a log cabin, outside the reach of law and order and fed largely on wild meat; and by the time he arrived at old age he might be working at a regular job and living in an ordered community with effective law enforcement. This was a deeper change than that which typically occurs in the life of a modern individual, yet it does not seem to have led to psychological problems. In fact, 19th century American society had an optimistic and self-confident tone, quite unlike that of today’s society.[8]

57.
The difference, we argue, is that modern man has the sense (largely justified) that change is imposed on him, whereas the 19th century frontiersman had the sense (also largely justified) that he created change himself, by his own choice. Thus a pioneer settled on a piece of land of his own choosing and made it into a farm through his own effort. In those days an entire county might have only a couple of hundred inhabitants and was a far more isolated and autonomous entity than a modern county is. Hence the pioneer farmer participated as a member of a relatively small group in the creation of a new, ordered community. One may well question whether the creation of this community was an improvement, but at any rate it satisfied the pioneer’s need for the power process.

58.
It would be possible to give other examples of societies in which there has been rapid change and/or lack of close community ties without the kind of massive behavioral aberration that is seen in today’s industrial society. We contend that the most important cause of social and psychological problems in modern society is the fact that people have insufficient opportunity to go through the power process in a normal way. We don’t mean to say that modern society is the only one in which the power process has been disrupted. Probably most if not all civilized societies have interfered with the power process to a greater or lesser extent. But in modern industrial society the problem has become particularly acute. Leftism, at least in its recent (mid-to-late -20th century) form, is in part a symptom of deprivation with respect to the power process.

Disruption of the power process in modern society

59.
We divide human drives into three groups: (1) those drives that can be satisfied with minimal effort; (2) those that can be satisfied but only at the cost of serious effort; (3) those that cannot be adequately satisfied no matter how much effort one makes. The power process is the process of satisfying the drives of the second group. The more drives there are in the third group, the more there is frustration, anger, eventually defeatism, depression, etc.

60.
In modern industrial society natural human drives tend to be pushed into the first and third groups, and the second group tends to consist increasingly of artificially created drives.

61.
In primitive societies, physical necessities generally fall into group 2: They can be obtained, but only at the cost of serious effort. But modern society tends to guaranty the physical necessities to everyone[9] in exchange for only minimal effort, hence physical needs are pushed into group 1. (There may be disagreement about whether the effort needed to hold a job is “minimal”; but usually, in lower- to middle-level jobs, whatever effort is required is merely that of obedience. You sit or stand where you are told to sit or stand and do what you are told to do in the way you are told to do it. Seldom do you have to exert yourself seriously, and in any case you have hardly any autonomy in work, so that the need for the power process is not well served.)

62.
Social needs, such as sex, love and status, often remain in group 2 in modern society, depending on the situation of the individual.[10] But, except for people who have a particularly strong drive for status, the effort required to fulfill the social drives is insufficient to satisfy adequately the need for the power process.

63.
So certain artificial needs have been created that fall into group 2, hence serve the need for the power process. Advertising and marketing techniques have been developed that make many people feel they need things that their grandparents never desired or even dreamed of. It requires serious effort to earn enough money to satisfy these artificial needs, hence they fall into group 2. (But see paragraphs 80-82.) Modern man must satisfy his need for the power process largely through pursuit of the artificial needs created by the advertising and marketing industry,[11] and through surrogate activities.

64.
It seems that for many people, maybe the majority, these artificial forms of the power process are insufficient. A theme that appears repeatedly in the writings of the social critics of the second half of the 20th century is the sense of purposelessness that afflicts many people in modern society. (This purposelessness is often called by other names such as “anomie” or “middle-class vacuity.”) We suggest that the so-called “identity crisis” is actually a search for a sense of purpose, often for commitment to a suitable surrogate activity. It may be that existentialism is in large part a response to the purposelessness of modern life.[12] Very widespread in modern society is the search for “fulfillment.” But we think that for the majority of people an activity whose main goal is fulfillment (that is, a surrogate activity) does not bring completely satisfactory fulfillment. In other words, it does not fully satisfy the need for the power process. (See paragraph 41.) That need can be fully satisfied only through activities that have some external goal, such as physical necessities, sex, love, status, revenge, etc.

65.
Moreover, where goals are pursued through earning money, climbing the status ladder or functioning as part of the system in some other way, most people are not in a position to pursue their goals autonomously. Most workers are someone else’s employee and, as we pointed out in paragraph 61, must spend their days doing what they are told to do in the way they are told to do it. Even most people who are in business for themselves have only limited autonomy. It is a chronic complaint of small-business persons and entrepreneurs that their hands are tied by excessive government regulation. Some of these regulations are doubtless unnecessary, but for the most part government regulations are essential and inevitable parts of our extremely complex society. A large portion of small business today operates on the franchise system. It was reported in the Wall Street Journal a few years ago that many of the franchise-granting companies require applicants for franchises to take a personality test that is designed to exclude those who have creativity and initiative, because such persons are not sufficiently docile to go along obediently with the franchise system. This excludes from small business many of the people who most need autonomy.

66.
Today people live more by virtue of what the system does for them or to them than by virtue of what they do for themselves. And what they do for themselves is done more and more along channels laid down by the system. Opportunities tend to be those that the system provides, the opportunities must be exploited in accord with the rules and regulations,[13] and techniques prescribed by experts must be followed if there is to be a chance of success.

67.
Thus the power process is disrupted in our society through a deficiency of real goals and a deficiency of autonomy in pursuit of goals. But it is also disrupted because of those human drives that fall into group 3: the drives that one cannot adequately satisfy no matter how much effort one makes. One of these drives is the need for security. Our lives depend on decisions made by other people; we have no control over these decisions and usually we do not even know the people who make them. (“We live in a world in which relatively few people—maybe 500 or 1,000—make the important decisions”—Philip B. Heymann of Harvard Law School, quoted by Anthony Lewis, New York Times, April 21, 1995.) Our lives depend on whether safety standards at a nuclear power plant are properly maintained; on how much pesticide is allowed to get into our food or how much pollution into our air; on how skillful (or incompetent) our doctor is; whether we lose or get a job may depend on decisions made by government economists or corporation executives; and so forth. Most individuals are not in a position to secure themselves against these threats to more than a very limited extent. The individual’s search for security is therefore frustrated, which leads to a sense of powerlessness.

68.
It may be objected that primitive man is physically less secure than modern man, as is shown by his shorter life expectancy; hence modern man suffers from less, not more than the amount of insecurity that is normal for human beings. but psychological security does not closely correspond with physical security. What makes us feel secure is not so much objective security as a sense of confidence in our ability to take care of ourselves. Primitive man, threatened by a fierce animal or by hunger, can fight in self-defense or travel in search of food. He has no certainty of success in these efforts, but he is by no means helpless against the things that threaten him. The modern individual on the other hand is threatened by many things against which he is helpless; nuclear accidents, carcinogens in food, environmental pollution, war, increasing taxes, invasion of his privacy by large organizations, nation-wide social or economic phenomena that may disrupt his way of life.

69.
It is true that primitive man is powerless against some of the things that threaten him; disease for example. But he can accept the risk of disease stoically. It is part of the nature of things, it is no one’s fault, unless it is the fault of some imaginary, impersonal demon. But threats to the modern individual tend to be man-made. They are not the results of chance but are imposed on him by other persons whose decisions he, as an individual, is unable to influence. Consequently he feels frustrated, humiliated and angry.

70.
Thus primitive man for the most part has his security in his own hands (either as an individual or as a member of a small group) whereas the security of modern man is in the hands of persons or organizations that are too remote or too large for him to be able personally to influence them. So modern man’s drive for security tends to fall into groups 1 and 3; in some areas (food, shelter, etc.) his security is assured at the cost of only trivial effort, whereas in other areas he cannot attain security. (The foregoing greatly simplifies the real situation, but it does indicate in a rough, general way how the condition of modern man differs from that of primitive man.)

71.
People have many transitory drives or impulses that are necessarily frustrated in modern life, hence fall into group 3. One may become angry, but modern society cannot permit fighting. In many situations it does not even permit verbal aggression. When going somewhere one may be in a hurry, or one may be in a mood to travel slowly, but one generally has no choice but to move with the flow of traffic and obey the traffic signals. One may want to do one’s work in a different way, but usually one can work only according to the rules laid down by one’s employer. In many other ways as well, modern man is strapped down by a network of rules and regulations (explicit or implicit) that frustrate many of his impulses and thus interfere with the power process. Most of these regulations cannot be disposed with, because they are necessary for the functioning of industrial society.

72.
Modern society is in certain respects extremely permissive. In matters that are irrelevant to the functioning of the system we can generally do what we please. We can believe in any religion we like (as long as it does not encourage behavior that is dangerous to the system). We can go to bed with anyone we like (as long as we practice “safe sex”). We can do anything we like as long as it is unimportant. But in all important matters the system tends increasingly to regulate our behavior.

73.
Behavior is regulated not only through explicit rules and not only by the government. Control is often exercised through indirect coercion or through psychological pressure or manipulation, and by organizations other than the government, or by the system as a whole. Most large organizations use some form of propaganda[14] to manipulate public attitudes or behavior. Propaganda is not limited to “commercials” and advertisements, and sometimes it is not even consciously intended as propaganda by the people who make it. For instance, the content of entertainment programming is a powerful form of propaganda. An example of indirect coercion: There is no law that says we have to go to work every day and follow our employer’s orders. Legally there is nothing to prevent us from going to live in the wild like primitive people or from going into business for ourselves. But in practice there is very little wild country left, and there is room in the economy for only a limited number of small business owners. Hence most of us can survive only as someone else’s employee.

74.
We suggest that modern man’s obsession with longevity, and with maintaining physical vigor and sexual attractiveness to an advanced age, is a symptom of unfulfillment resulting from deprivation with respect to the power process. The “mid-life crisis” also is such a symptom. So is the lack of interest in having children that is fairly common in modern society but almost unheard-of in primitive societies.

75.
In primitive societies life is a succession of stages. The needs and purposes of one stage having been fulfilled, there is no particular reluctance about passing on to the next stage. A young man goes through the power process by becoming a hunter, hunting not for sport or for fulfillment but to get meat that is necessary for food. (In young women the process is more complex, with greater emphasis on social power; we won’t discuss that here.) This phase having been successfully passed through, the young man has no reluctance about settling down to the responsibilities of raising a family. (In contrast, some modern people indefinitely postpone having children because they are too busy seeking some kind of “fulfillment.” We suggest that the fulfillment they need is adequate experience of the power process—with real goals instead of the artificial goals of surrogate activities.) Again, having successfully raised his children, going through the power process by providing them with the physical necessities, the primitive man feels that his work is done and he is prepared to accept old age (if he survives that long) and death. Many modern people, on the other hand, are disturbed by the prospect of death, as is shown by the amount of effort they expend trying to maintain their physical condition, appearance and health. We argue that this is due to unfulfillment resulting from the fact that they have never put their physical powers to any use, have never gone through the power process using their bodies in a serious way. It is not the primitive man, who has used his body daily for practical purposes, who fears the deterioration of age, but the modern man, who has never had a practical use for his body beyond walking from his car to his house. It is the man whose need for the power process has been satisfied during his life who is best prepared to accept the end of that life.

76.
In response to the arguments of this section someone will say, “Society must find a way to give people the opportunity to go through the power process.” For such people the value of the opportunity is destroyed by the very fact that society gives it to them. What they need is to find or make their own opportunities. As long as the system gives them their opportunities it still has them on a leash. To attain autonomy they must get off that leash.

How some people adjust

77.
Not everyone in industrial-technological society suffers from psychological problems. Some people even profess to be quite satisfied with society as it is. We now discuss some of the reasons why people differ so greatly in their response to modern society.

78.
First, there doubtless are differences in the strength of the drive for power. Individuals with a weak drive for power may have relatively little need to go through the power process, or at least relatively little need for autonomy in the power process. These are docile types who would have been happy as plantation darkies in the Old South. (We don’t mean to sneer at “plantation darkies” of the Old South. To their credit, most of the slaves were not content with their servitude. We do sneer at people who are content with servitude.)

79.
Some people may have some exceptional drive, in pursuing which they satisfy their need for the power process. For example, those who have an unusually strong drive for social status may spend their whole lives climbing the status ladder without ever getting bored with that game.

80.
People vary in their susceptibility to advertising and marketing techniques. Some people are so susceptible that, even if they make a great deal of money, they cannot satisfy their constant craving for the shiny new toys that the marketing industry dangles before their eyes. So they always feel hard-pressed financially even if their income is large, and their cravings are frustrated.

81.
Some people have low susceptibility to advertising and marketing techniques. These are the people who aren’t interested in money. Material acquisition does not serve their need for the power process.

82.
People who have medium susceptibility to advertising and marketing techniques are able to earn enough money to satisfy their craving for goods and services, but only at the cost of serious effort (putting in overtime, taking a second job, earning promotions, etc.) Thus material acquisition serves their need for the power process. But it does not necessarily follow that their need is fully satisfied. They may have insufficient autonomy in the power process (their work may consist of following orders) and some of their drives may be frustrated (e.g., security, aggression) (We are guilty of oversimplification in paragraphs 80-82 because we have assumed that the desire for material acquisition is entirely a creation of the advertising and marketing industry. Of course it’s not that simple).

83.
Some people partly satisfy their need for power by identifying themselves with a powerful organization or mass movement. An individual lacking goals or power joins a movement or an organization, adopts its goals as his own, then works toward these goals. When some of the goals are attained, the individual, even though his personal efforts have played only an insignificant part in the attainment of the goals, feels (through his identification with the movement or organization) as if he had gone through the power process. This phenomenon was exploited by the fascists, Nazis and communists. Our society uses it, too, though less crudely. Example: Manuel Noriega was an irritant to the U.S. (goal: punish Noriega). The U.S. invaded Panama (effort) and punished Noriega (attainment of goal). The U.S. went through the power process and many Americans, because of their identification with the U.S., experienced the power process vicariously. Hence the widespread public approval of the Panama invasion; it gave people a sense of power.[15] We see the same phenomenon in armies, corporations, political parties, humanitarian organizations, religious or ideological movements. In particular, leftist movements tend to attract people who are seeking to satisfy their need for power. But for most people identification with a large organization or a mass movement does not fully satisfy the need for power.

84.
Another way in which people satisfy their need for the power process is through surrogate activities. As we explained in paragraphs 38-40, a surrogate activity that is directed toward an artificial goal that the individual pursues for the sake of the “fulfillment” that he gets from pursuing the goal, not because he needs to attain the goal itself. For instance, there is no practical motive for building enormous muscles, hitting a little ball into a hole or acquiring a complete series of postage stamps. Yet many people in our society devote themselves with passion to bodybuilding, golf or stamp collecting. Some people are more “other-directed” than others, and therefore will more readily attach importance to a surrogate activity simply because the people around them treat it as important or because society tells them it is important. That is why some people get very serious about essentially trivial activities such as sports, or bridge, or chess, or arcane scholarly pursuits, whereas others who are more clear-sighted never see these things as anything but the surrogate activities that they are, and consequently never attach enough importance to them to satisfy their need for the power process in that way. It only remains to point out that in many cases a person’s way of earning a living is also a surrogate activity. Not a pure surrogate activity, since part of the motive for the activity is to gain the physical necessities and (for some people) social status and the luxuries that advertising makes them want. But many people put into their work far more effort than is necessary to earn whatever money and status they require, and this extra effort constitutes a surrogate activity. This extra effort, together with the emotional investment that accompanies it, is one of the most potent forces acting toward the continual development and perfecting of the system, with negative consequences for individual freedom (see paragraph 131). Especially, for the most creative scientists and engineers, work tends to be largely a surrogate activity. This point is so important that is deserves a separate discussion, which we shall give in a moment (paragraphs 87-92).

85.
In this section we have explained how many people in modern society do satisfy their need for the power process to a greater or lesser extent. But we think that for the majority of people the need for the power process is not fully satisfied. In the first place, those who have an insatiable drive for status, or who get firmly “hooked” on a surrogate activity, or who identify strongly enough with a movement or organization to satisfy their need for power in that way, are exceptional personalities. Others are not fully satisfied with surrogate activities or by identification with an organization (see paragraphs 41, 64). In the second place, too much control is imposed by the system through explicit regulation or through socialization, which results in a deficiency of autonomy, and in frustration due to the impossibility of attaining certain goals and the necessity of restraining too many impulses.

86.
But even if most people in industrial-technological society were well satisfied, we (FC) would still be opposed to that form of society, because (among other reasons) we consider it demeaning to fulfill one’s need for the power process through surrogate activities or through identification with an organization, rather than through pursuit of real goals.

The motives of scientists

87.
Science and technology provide the most important examples of surrogate activities. Some scientists claim that they are motivated by “curiosity;” that notion is simply absurd. Most scientists work on highly specialized problems that are not the object of any normal curiosity. For example, is an astronomer, a mathematician or an entomologist curious about the properties of isopropyltrimethylmethane? Of course not. Only a chemist is curious about such a thing, and he is curious about it only because chemistry is his surrogate activity. Is the chemist curious about the appropriate classification of a new species of beetle? No. That question is of interest only to the entomologist, and he is interested in it only because entomology is his surrogate activity. If the chemist and the entomologist had to exert themselves seriously to obtain the physical necessities, and if that effort exercised their abilities in an interesting way but in some nonscientific pursuit, then they couldn’t give a damn about isopropyltrimethylmethane or the classification of beetles. Suppose that lack of funds for postgraduate education had led the chemist to become an insurance broker instead of a chemist. In that case he would have been very interested in insurance matters but would have cared nothing about isopropyltrimethylmethane. In any case it is not normal to put into the satisfaction of mere curiosity the amount of time and effort that scientists put into their work. The “curiosity” explanation for the scientists’ motive just doesn’t stand up.

88.
The “benefit of humanity” explanation doesn’t work any better. Some scientific work has no conceivable relation to the welfare of the human race—most of archeology or comparative linguistics for example. Some other areas of science present obviously dangerous possibilities. Yet scientists in these areas are just as enthusiastic about their work as those who develop vaccines or study air pollution. Consider the case of Dr. Edward Teller, who had an obvious emotional involvement in promoting nuclear power plants. Did this involvement stem from a desire to benefit humanity? If so, then why didn’t Dr. Teller get emotional about other “humanitarian” causes? If he was such a humanitarian then why did he help to develop the H-bomb? As with many other scientific achievements, it is very much open to question whether nuclear power plants actually do benefit humanity. Does the cheap electricity outweigh the accumulating waste and risk of accidents? Dr. Teller saw only one side of the question. Clearly his emotional involvement with nuclear power arose not from a desire to “benefit humanity” but from a personal fulfillment he got from his work and from seeing it put to practical use.

89.
The same is true of scientists generally. With possible rare exceptions, their motive is neither curiosity nor a desire to benefit humanity but the need to go through the power process: to have a goal (a scientific problem to solve), to make an effort (research) and to attain the goal (solution of the problem.) Science is a surrogate activity because scientists work mainly for the fulfillment they get out of the work itself.

90.
Of course, it’s not that simple. Other motives do play a role for many scientists. Money and status for example. Some scientists may be persons of the type who have an insatiable drive for status (see paragraph 79) and this may provide much of the motivation for their work. No doubt the majority of scientists, like the majority of the general population, are more or less susceptible to advertising and marketing techniques and need money to satisfy their craving for goods and services. Thus science is not a pure surrogate activity. But it is in large part a surrogate activity.

91.
Also, science and technology constitute a mass power movement, and many scientists gratify their need for power through identification with this mass movement (see paragraph 83).

92.
Thus science marches on blindly, without regard to the real welfare of the human race or to any other standard, obedient only to the psychological needs of the scientists and of the government officials and corporation executives who provide the funds for research.

The nature of freedom

93.
We are going to argue that industrial-technological society cannot be reformed in such a way as to prevent it from progressively narrowing the sphere of human freedom. But because “freedom” is a word that can be interpreted in many ways, we must first make clear what kind of freedom we are concerned with.

94.
By “freedom” we mean the opportunity to go through the power process, with real goals not the artificial goals of surrogate activities, and without interference, manipulation or supervision from anyone, especially from any large organization. Freedom means being in control (either as an individual or as a member of a small group) of the life-and-death issues of one’s existence; food, clothing, shelter and defense against whatever threats there may be in one’s environment. Freedom means having power; not the power to control other people but the power to control the circumstances of one’s own life. One does not have freedom if anyone else (especially a large organization) has power over one, no matter how benevolently, tolerantly and permissively that power may be exercised. It is important not to confuse freedom with mere permissiveness (see paragraph 72).

95.
It is said that we live in a free society because we have a certain number of constitutionally guaranteed rights. But these are not as important as they seem. The degree of personal freedom that exists in a society is determined more by the economic and technological structure of the society than by its laws or its form of government.[16] Most of the Indian nations of New England were monarchies, and many of the cities of the Italian Renaissance were controlled by dictators. But in reading about these societies one gets the impression that they allowed far more personal freedom than our society does. In part this was because they lacked efficient mechanisms for enforcing the ruler’s will: There were no modern, well-organized police forces, no rapid long-distance communications, no surveillance cameras, no dossiers of information about the lives of average citizens. Hence it was relatively easy to evade control.

96.
As for our constitutional rights, consider for example that of freedom of the press. We certainly don’t mean to knock that right: it is very important tool for limiting concentration of political power and for keeping those who do have political power in line by publicly exposing any misbehavior on their part. But freedom of the press is of very little use to the average citizen as an individual. The mass media are mostly under the control of large organizations that are integrated into the system. Anyone who has a little money can have something printed, or can distribute it on the Internet or in some such way, but what he has to say will be swamped by the vast volume of material put out by the media, hence it will have no practical effect. To make an impression on society with words is therefore almost impossible for most individuals and small groups. Take us (FC) for example. If we had never done anything violent and had submitted the present writings to a publisher, they probably would not have been accepted. If they had been accepted and published, they probably would not have attracted many readers, because it’s more fun to watch the entertainment put out by the media than to read a sober essay. Even if these writings had had many readers, most of these readers would soon have forgotten what they had read as their minds were flooded by the mass of material to which the media expose them. In order to get our message before the public with some chance of making a lasting impression, we’ve had to kill people.

97.
Constitutional rights are useful up to a point, but they do not serve to guarantee much more than what could be called the bourgeois conception of freedom. According to the bourgeois conception, a “free” man is essentially an element of a social machine and has only a certain set of prescribed and delimited freedoms; freedoms that are designed to serve the needs of the social machine more than those of the individual. Thus the bourgeois’s “free” man has economic freedom because that promotes growth and progress; he has freedom of the press because public criticism restrains misbehavior by political leaders; he has a rights to a fair trial because imprisonment at the whim of the powerful would be bad for the system. This was clearly the attitude of Simon Bolivar. To him, people deserved liberty only if they used it to promote progress (progress as conceived by the bourgeois). Other bourgeois thinkers have taken a similar view of freedom as a mere means to collective ends. Chester C. Tan, “Chinese Political Thought in the Twentieth Century,” page 202, explains the philosophy of the Kuomintang leader Hu Han-min: “An individual is granted rights because he is a member of society and his community life requires such rights. By community Hu meant the whole society of the nation.” And on page 259 Tan states that according to Carsum Chang (Chang Chun-mai, head of the State Socialist Party in China) freedom had to be used in the interest of the state and of the people as a whole. But what kind of freedom does one have if one can use it only as someone else prescribes? FC’s conception of freedom is not that of Bolivar, Hu, Chang or other bourgeois theorists. The trouble with such theorists is that they have made the development and application of social theories their surrogate activity. Consequently the theories are designed to serve the needs of the theorists more than the needs of any people who may be unlucky enough to live in a society on which the theories are imposed.

98.
One more point to be made in this section: It should not be assumed that a person has enough freedom just because he says he has enough. Freedom is restricted in part by psychological control of which people are unconscious, and moreover many people’s ideas of what constitutes freedom are governed more by social convention than by their real needs. For example, it’s likely that many leftists of the oversocialized type would say that most people, including themselves are socialized too little rather than too much, yet the oversocialized leftist pays a heavy psychological price for his high level of socialization.

Some principles of history

99.
Think of history as being the sum of two components: an erratic component that consists of unpredictable events that follow no discernible pattern, and a regular component that consists of long-term historical trends. Here we are concerned with the long-term trends.

First principle

100.
If a small change is made that affects a long-term historical trend, then the effect of that change will almost always be transitory – the trend will soon revert to its original state. (Example: A reform movement designed to clean up political corruption in a society rarely has more than a short-term effect; sooner or later the reformers relax and corruption creeps back in. The level of political corruption in a given society tends to remain constant, or to change only slowly with the evolution of the society. Normally, a political cleanup will be permanent only if accompanied by widespread social changes; a small change in the society won’t be enough.) If a small change in a long-term historical trend appears to be permanent, it is only because the change acts in the direction in which the trend is already moving, so that the trend is not altered but only pushed a step ahead.

101.
The first principle is almost a tautology. If a trend were not stable with respect to small changes, it would wander at random rather than following a definite direction; in other words it would not be a long-term trend at all.

Second principle

102.
If a change is made that is sufficiently large to alter permanently a long-term historical trend, then it will alter the society as a whole. In other words, a society is a system in which all parts are interrelated, and you can’t permanently change any important part without changing all the other parts as well.

Third principle

103.
If a change is made that is large enough to alter permanently a long-term trend, then the consequences for the society as a whole cannot be predicted in advance. (Unless various other societies have passed through the same change and have all experienced the same consequences, in which case one can predict on empirical grounds that another society that passes through the same change will be likely to experience similar consequences.)

Fourth principle

104.
A new kind of society cannot be designed on paper. That is, you cannot plan out a new form of society in advance, then set it up and expect it to function as it was designed to.

105.
The third and fourth principles result from the complexity of human societies. A change in human behavior will affect the economy of a society and its physical environment; the economy will affect the environment and vice versa, and the changes in the economy and the environment will affect human behavior in complex, unpredictable ways; and so forth. The network of causes and effects is far too complex to be untangled and understood.

Fifth principle

106.
People do not consciously and rationally choose the form of their society. Societies develop through processes of social evolution that are not under rational human control.

107.
The fifth principle is a consequence of the other four.

108.
To illustrate: By the first principle, generally speaking an attempt at social reform either acts in the direction in which the society is developing anyway (so that it merely accelerates a change that would have occurred in any case) or else it only has a transitory effect, so that the society soon slips back into its old groove. To make a lasting change in the direction of development of any important aspect of a society, reform is insufficient and revolution is required. (A revolution does not necessarily involve an armed uprising or the overthrow of a government.) By the second principle, a revolution never changes only one aspect of a society; and by the third principle changes occur that were never expected or desired by the revolutionaries. By the fourth principle, when revolutionaries or utopians set up a new kind of society, it never works out as planned.

109.
The American Revolution does not provide a counterexample. The American “Revolution” was not a revolution in our sense of the word, but a war of independence followed by a rather far-reaching political reform. The Founding Fathers did not change the direction of development of American society, nor did they aspire to do so. They only freed the development of American society from the retarding effect of British rule. Their political reform did not change any basic trend, but only pushed American political culture along its natural direction of development. British society, of which American society was an off-shoot, had been moving for a long time in the direction of representative democracy. And prior to the War of Independence the Americans were already practicing a significant degree of representative democracy in the colonial assemblies. The political system established by the Constitution was modeled on the British system and on the colonial assemblies. With major alteration, to be sure—there is no doubt that the Founding Fathers took a very important step. But it was a step along the road the English-speaking world was already traveling. The proof is that Britain and all of its colonies that were populated predominantly by people of British descent ended up with systems of representative democracy essentially similar to that of the United States. If the Founding Fathers had lost their nerve and declined to sign the Declaration of Independence, our way of life today would not have been significantly different. Maybe we would have had somewhat closer ties to Britain, and would have had a Parliament and Prime Minister instead of a Congress and President. No big deal. Thus the American Revolution provides not a counterexample to our principles but a good illustration of them.

110.
Still, one has to use common sense in applying the principles. They are expressed in imprecise language that allows latitude for interpretation, and exceptions to them can be found. So we present these principles not as inviolable laws but as rules of thumb, or guides to thinking, that may provide a partial antidote to naive ideas about the future of society. The principles should be borne constantly in mind, and whenever one reaches a conclusion that conflicts with them one should carefully reexamine one’s thinking and retain the conclusion only if one has good, solid reasons for doing so.

Industrial-technological society cannot be reformed

111.
The foregoing principles help to show how hopelessly difficult it would be to reform the industrial system in such a way as to prevent it from progressively narrowing our sphere of freedom. There has been a consistent tendency, going back at least to the Industrial Revolution for technology to strengthen the system at a high cost in individual freedom and local autonomy. Hence any change designed to protect freedom from technology would be contrary to a fundamental trend in the development of our society. Consequently, such a change either would be a transitory one—soon swamped by the tide of history—or, if large enough to be permanent would alter the nature of our whole society. This by the first and second principles. Moreover, since society would be altered in a way that could not be predicted in advance (third principle) there would be great risk. Changes large enough to make a lasting difference in favor of freedom would not be initiated because it would be realized that they would gravely disrupt the system. So any attempts at reform would be too timid to be effective. Even if changes large enough to make a lasting difference were initiated, they would be retracted when their disruptive effects became apparent. Thus, permanent changes in favor of freedom could be brought about only by persons prepared to accept radical, dangerous and unpredictable alteration of the entire system. In other words, by revolutionaries, not reformers.

112.
People anxious to rescue freedom without sacrificing the supposed benefits of technology will suggest naive schemes for some new form of society that would reconcile freedom with technology. Apart from the fact that people who make suggestions seldom propose any practical means by which the new form of society could be set up in the first place, it follows from the fourth principle that even if the new form of society could be once established, it either would collapse or would give results very different from those expected.

113.
So even on very general grounds it seems highly improbable that any way of changing society could be found that would reconcile freedom with modern technology. In the next few sections we will give more specific reasons for concluding that freedom and technological progress are incompatible.

Restriction of freedom is unavoidable in industrial society

114.
As explained in paragraph 65-67, 70-73, modern man is strapped down by a network of rules and regulations, and his fate depends on the actions of persons remote from him whose decisions he cannot influence. This is not accidental or a result of the arbitrariness of arrogant bureaucrats. It is necessary and inevitable in any technologically advanced society. The system has to regulate human behavior closely in order to function. At work, people have to do what they are told to do, otherwise production would be thrown into chaos. Bureaucracies have to be run according to rigid rules. To allow any substantial personal discretion to lower-level bureaucrats would disrupt the system and lead to charges of unfairness due to differences in the way individual bureaucrats exercised their discretion. It is true that some restrictions on our freedom could be eliminated, but generally speaking the regulation of our lives by large organizations is necessary for the functioning of industrial-technological society. The result is a sense of powerlessness on the part of the average person. It may be, however, that formal regulations will tend increasingly to be replaced by psychological tools that make us want to do what the system requires of us. (Propaganda 14, educational techniques, “mental health” programs, etc.)

115.
The system has to force people to behave in ways that are increasingly remote from the natural pattern of human behavior. For example, the system needs scientists, mathematicians and engineers. It can’t function without them. So heavy pressure is put on children to excel in these fields. It isn’t natural for an adolescent human being to spend the bulk of his time sitting at a desk absorbed in study. A normal adolescent wants to spend his time in active contact with the real world. Among primitive peoples the things that children are trained to do are in natural harmony with natural human impulses. Among the American Indians, for example, boys were trained in active outdoor pursuits—just the sort of things that boys like. But in our society children are pushed into studying technical subjects, which most do grudgingly.

116.
Because of the constant pressure that the system exerts to modify human behavior, there is a gradual increase in the number of people who cannot or will not adjust to society’s requirements: welfare leeches, youth-gang members, cultists, anti-government rebels, radical environmentalist saboteurs, dropouts and resisters of various kinds.

117.
In any technologically advanced society the individual’s fate must depend on decisions that he personally cannot influence to any great extent. A technological society cannot be broken down into small, autonomous communities, because production depends on the cooperation of very large numbers of people and machines. Such a society must be highly organized and decisions have to be made that affect very large numbers of people. When a decision affects, say, a million people, then each of the affected individuals has, on the average, only a one-millionth share in making the decision. What usually happens in practice is that decisions are made by public officials or corporation executives, or by technical specialists, but even when the public votes on a decision the number of voters ordinarily is too large for the vote of any one individual to be significant.[17] Thus most individuals are unable to influence measurably the major decisions that affect their lives. There is no conceivable way to remedy this in a technologically advanced society. The system tries to “solve” this problem by using propaganda to make people want the decisions that have been made for them, but even if this “solution” were completely successful in making people feel better, it would be demeaning.

118.
Conservatives and some others advocate more “local autonomy.” Local communities once did have autonomy, but such autonomy becomes less and less possible as local communities become more enmeshed with and dependent on large-scale systems like public utilities, computer networks, highway systems, the mass communications media, the modern health care system. Also operating against autonomy is the fact that technology applied in one location often affects people at other locations far away. Thus pesticide or chemical use near a creek may contaminate the water supply hundreds of miles downstream, and the greenhouse effect affects the whole world.

119.
The system does not and cannot exist to satisfy human needs. Instead, it is human behavior that has to be modified to fit the needs of the system. This has nothing to do with the political or social ideology that may pretend to guide the technological system. It is the fault of technology, because the system is guided not by ideology but by technical necessity.[18] Of course the system does satisfy many human needs, but generally speaking it does this only to the extent that it is to the advantage of the system to do it. It is the needs of the system that are paramount, not those of the human being. For example, the system provides people with food because the system couldn’t function if everyone starved; it attends to people’s psychological needs whenever it can conveniently do so, because it couldn’t function if too many people became depressed or rebellious. But the system, for good, solid, practical reasons, must exert constant pressure on people to mold their behavior to the needs of the system. Too much waste accumulating? The government, the media, the educational system, environmentalists, everyone inundates us with a mass of propaganda about recycling. Need more technical personnel? A chorus of voices exhorts kids to study science. No one stops to ask whether it is inhumane to force adolescents to spend the bulk of their time studying subjects most of them hate. When skilled workers are put out of a job by technical advances and have to undergo “retraining,” no one asks whether it is humiliating for them to be pushed around in this way. It is simply taken for granted that everyone must bow to technical necessity and for good reason: If human needs were put before technical necessity there would be economic problems, unemployment, shortages or worse. The concept of “mental health” in our society is defined largely by the extent to which an individual behaves in accord with the needs of the system and does so without showing signs of stress.

120.
Efforts to make room for a sense of purpose and for autonomy within the system are no better than a joke. For example, one company, instead of having each of its employees assemble only one section of a catalogue, had each assemble a whole catalogue, and this was supposed to give them a sense of purpose and achievement. Some companies have tried to give their employees more autonomy in their work, but for practical reasons this usually can be done only to a very limited extent, and in any case employees are never given autonomy as to ultimate goals—their “autonomous” efforts can never be directed toward goals that they select personally, but only toward their employer’s goals, such as the survival and growth of the company. Any company would soon go out of business if it permitted its employees to act otherwise. Similarly, in any enterprise within a socialist system, workers must direct their efforts toward the goals of the enterprise, otherwise the enterprise will not serve its purpose as part of the system. Once again, for purely technical reasons it is not possible for most individuals or small groups to have much autonomy in industrial society. Even the small-business owner commonly has only limited autonomy. Apart from the necessity of government regulation, he is restricted by the fact that he must fit into the economic system and conform to its requirements. For instance, when someone develops a new technology, the small-business person often has to use that technology whether he wants to or not, in order to remain competitive.

The ‘bad’ parts of technology cannot be separated from the ‘good’ parts

121.
A further reason why industrial society cannot be reformed in favor of freedom is that modern technology is a unified system in which all parts are dependent on one another. You can’t get rid of the “bad” parts of technology and retain only the “good” parts. Take modern medicine, for example. Progress in medical science depends on progress in chemistry, physics, biology, computer science and other fields. Advanced medical treatments require expensive, high-tech equipment that can be made available only by a technologically progressive, economically rich society. Clearly you can’t have much progress in medicine without the whole technological system and everything that goes with it.

122.
Even if medical progress could be maintained without the rest of the technological system, it would by itself bring certain evils. Suppose for example that a cure for diabetes is discovered. People with a genetic tendency to diabetes will then be able to survive and reproduce as well as anyone else. Natural selection against genes for diabetes will cease and such genes will spread throughout the population. (This may be occurring to some extent already, since diabetes, while not curable, can be controlled through the use of insulin.) The same thing will happen with many other diseases susceptibility to which is affected by genetic degradation of the population. The only solution will be some sort of eugenics program or extensive genetic engineering of human beings, so that man in the future will no longer be a creation of nature, or of chance, or of God (depending on your religious or philosophical opinions), but a manufactured product.

123.
If you think that big government interferes in your life too much now, just wait till the government starts regulating the genetic constitution of your children. Such regulation will inevitably follow the introduction of genetic engineering of human beings, because the consequences of unregulated genetic engineering would be disastrous.[19]

124.
The usual response to such concerns is to talk about “medical ethics.” But a code of ethics would not serve to protect freedom in the face of medical progress; it would only make matters worse. A code of ethics applicable to genetic engineering would be in effect a means of regulating the genetic constitution of human beings. Somebody (probably the upper-middle class, mostly) would decide that such and such applications of genetic engineering were “ethical” and others were not, so that in effect they would be imposing their own values on the genetic constitution of the population at large.[20] Even if a code of ethics were chosen on a completely democratic basis, the majority would be imposing their own values on any minorities who might have a different idea of what constituted an “ethical” use of genetic engineering. The only code of ethics that would truly protect freedom would be one that prohibited any genetic engineering of human beings, and you can be sure that no such code will ever be applied in a technological society. No code that reduced genetic engineering to a minor role could stand up for long, because the temptation presented by the immense power of biotechnology would be irresistible, especially since to the majority of people many of its applications will seem obviously and unequivocally good (eliminating physical and mental diseases, giving people the abilities they need to get along in today’s world). Inevitably, genetic engineering will be used extensively, but only in ways consistent with the needs of the industrial-technological system.

Technology is a more powerful social force than the aspiration for freedom

125.
It is not possible to make a lasting compromise between technology and freedom, because technology is by far the more powerful social force and continually encroaches on freedom through repeated compromises. Imagine the case of two neighbors, each of whom at the outset owns the same amount of land, but one of whom is more powerful than the other. The powerful one demands a piece of the other’s land. The weak one refuses. The powerful one says, “OK, let’s compromise. Give me half of what I asked.” The weak one has little choice but to give in. Some time later the powerful neighbor demands another piece of land, again there is a compromise, and so forth. By forcing a long series of compromises on the weaker man, the powerful one eventually gets all of his land. So it goes in the conflict between technology and freedom.

126.
Let us explain why technology is a more powerful social force than the aspiration for freedom.

127.
A technological advance that appears not to threaten freedom often turns out to threaten it very seriously later on. For example, consider motorized transport. A walking man formerly could go where he pleased, go at his own pace without observing any traffic regulations, and was independent of technological support-systems. When motor vehicles were introduced they appeared to increase man’s freedom. They took no freedom away from the walking man, no one had to have an automobile if he didn’t want one, and anyone who did choose to buy an automobile could travel much faster than the walking man. But the introduction of motorized transport soon changed society in such a way as to restrict greatly man’s freedom of locomotion. When automobiles became numerous, it became necessary to regulate their use extensively. In a car, especially in densely populated areas, one cannot just go where one likes at one’s own pace—one’s movement is governed by the flow of traffic and by various traffic laws. One is tied down by various obligations: license requirements, driver test, renewing registration, insurance, maintenance required for safety, monthly payments on purchase price. Moreover, the use of motorized transport is no longer optional. Since the introduction of motorized transport the arrangement of our cities has changed in such a way that the majority of people no longer live within walking distance of their place of employment, shopping areas and recreational opportunities, so that they have to depend on the automobile for transportation. Or else they must use public transportation, in which case they have even less control over their own movement than when driving a car. Even the walker’s freedom is now greatly restricted. In the city he continually has to stop and wait for traffic lights that are designed mainly to serve auto traffic. In the country, motor traffic makes it dangerous and unpleasant to walk along the highway. (Note the important point we have illustrated with the case of motorized transport: When a new item of technology is introduced as an option that an individual can accept or not as he chooses, it does not necessarily remain optional. In many cases the new technology changes society in such a way that people eventually find themselves forced to use it.)

128.
While technological progress as a whole continually narrows our sphere of freedom, each new technical advance considered by itself appears to be desirable. Electricity, indoor plumbing, rapid long-distance communications . . . how could one argue against any of these things, or against any other of the innumerable technical advances that have made modern society? It would have been absurd to resist the introduction of the telephone, for example. It offered many advantages and no disadvantages. Yet as we explained in paragraphs 59-76, all these technical advances taken together have created a world in which the average man’s fate is no longer in his own hands or in the hands of his neighbors and friends, but in those of politicians, corporation executives and remote, anonymous technicians and bureaucrats whom he as an individual has no power to influence.[21] The same process will continue in the future. Take genetic engineering, for example. Few people will resist the introduction of a genetic technique that eliminates a hereditary disease. It does no apparent harm and prevents much suffering. Yet a large number of genetic improvements taken together will make the human being into an engineered product rather than a free creation of chance (or of God, or whatever, depending on your religious beliefs).

129.
Another reason why technology is such a powerful social force is that, within the context of a given society, technological progress marches in only one direction; it can never be reversed. Once a technical innovation has been introduced, people usually become dependent on it, unless it is replaced by some still more advanced innovation. Not only do people become dependent as individuals on a new item of technology, but, even more, the system as a whole becomes dependent on it. (Imagine what would happen to the system today if computers, for example, were eliminated.) Thus the system can move in only one direction, toward greater technologization. Technology repeatedly forces freedom to take a step back—short of the overthrow of the whole technological system.

130.
Technology advances with great rapidity and threatens freedom at many different points at the same time (crowding, rules and regulations, increasing dependence of individuals on large organizations, propaganda and other psychological techniques, genetic engineering, invasion of privacy through surveillance devices and computers, etc.) To hold back any one of the threats to freedom would require a long and difficult social struggle. Those who want to protect freedom are overwhelmed by the sheer number of new attacks and the rapidity with which they develop, hence they become pathetic and no longer resist. To fight each of the threats separately would be futile. Success can be hoped for only by fighting the technological system as a whole; but that is revolution not reform.

131.
Technicians (we use this term in its broad sense to describe all those who perform a specialized task that requires training) tend to be so involved in their work (their surrogate activity) that when a conflict arises between their technical work and freedom, they almost always decide in favor of their technical work. This is obvious in the case of scientists, but it also appears elsewhere: Educators, humanitarian groups, conservation organizations do not hesitate to use propaganda or other psychological techniques to help them achieve their laudable ends. Corporations and government agencies, when they find it useful, do not hesitate to collect information about individuals without regard to their privacy. Law enforcement agencies are frequently inconvenienced by the constitutional rights of suspects and often of completely innocent persons, and they do whatever they can do legally (or sometimes illegally) to restrict or circumvent those rights. Most of these educators, government officials and law officers believe in freedom, privacy and constitutional rights, but when these conflict with their work, they usually feel that their work is more important.

132.
It is well known that people generally work better and more persistently when striving for a reward than when attempting to avoid a punishment or negative outcome. Scientists and other technicians are motivated mainly by the rewards they get through their work. But those who oppose technological invasions of freedom are working to avoid a negative outcome, consequently there are a few who work persistently and well at this discouraging task. If reformers ever achieved a signal victory that seemed to set up a solid barrier against further erosion of freedom through technological progress, most would tend to relax and turn their attention to more agreeable pursuits. But the scientists would remain busy in their laboratories, and technology as it progresses would find ways, in spite of any barriers, to exert more and more control over individuals and make them always more dependent on the system.

133.
No social arrangements, whether laws, institutions, customs or ethical codes, can provide permanent protection against technology. History shows that all social arrangements are transitory; they all change or break down eventually. But technological advances are permanent within the context of a given civilization. Suppose for example that it were possible to arrive at some social arrangements that would prevent genetic engineering from being applied to human beings, or prevent it from being applied in such a ways as to threaten freedom and dignity. Still, the technology would remain waiting. Sooner or later the social arrangement would break down. Probably sooner, given that pace of change in our society. Then genetic engineering would begin to invade our sphere of freedom, and this invasion would be irreversible (short of a breakdown of technological civilization itself). Any illusions about achieving anything permanent through social arrangements should be dispelled by what is currently happening with environmental legislation. A few years ago it seemed that there were secure legal barriers preventing at least some of the worst forms of environmental degradation. A change in the political wind, and those barriers begin to crumble.

134.
For all of the foregoing reasons, technology is a more powerful social force than the aspiration for freedom. But this statement requires an important qualification. It appears that during the next several decades the industrial-technological system will be undergoing severe stresses due to economic and environmental problems, and especially due to problems of human behavior (alienation, rebellion, hostility, a variety of social and psychological difficulties). We hope that the stresses through which the system is likely to pass will cause it to break down, or at least weaken it sufficiently so that a revolution occurs and is successful, then at that particular moment the aspiration for freedom will have proved more powerful than technology.

135.
In paragraph 125 we used an analogy of a weak neighbor who is left destitute by a strong neighbor who takes all his land by forcing on him a series of compromises. But suppose now that the strong neighbor gets sick, so that he is unable to defend himself. The weak neighbor can force the strong one to give him his land back, or he can kill him. If he lets the strong man survive and only forces him to give his land back, he is a fool, because when the strong man gets well he will again take all the land for himself. The only sensible alternative for the weaker man is to kill the strong one while he has the chance. In the same way, while the industrial system is sick we must destroy it. If we compromise with it and let it recover from its sickness, it will eventually wipe out all of our freedom.

Simpler social problems have proved intractable

136.
If anyone still imagines that it would be possible to reform the system in such a way as to protect freedom from technology, let him consider how clumsily and for the most part unsuccessfully our society has dealt with other social problems that are far more simple and straightforward. Among other things, the system has failed to stop environmental degradation, political corruption, drug trafficking or domestic abuse.

137.
Take our environmental problems, for example. Here the conflict of values is straightforward: economic expedience now versus saving some of our natural resources for our grandchildren. [22] But on this subject we get only a lot of blather and obfuscation from the people who have power, and nothing like a clear, consistent line of action, and we keep on piling up environmental problems that our grandchildren will have to live with. Attempts to resolve the environmental issue consist of struggles and compromises between different factions, some of which are ascendant at one moment, others at another moment. The line of struggle changes with the shifting currents of public opinion. This is not a rational process, nor is it one that is likely to lead to a timely and successful solution to the problem. Major social problems, if they get “solved” at all, are rarely or never solved through any rational, comprehensive plan. They just work themselves out through a process in which various competing groups pursuing their own (usually short-term) self-interest [23] arrive (mainly by luck) at some more or less stable modus vivendi. In fact, the principles we formulated in paragraphs 100-106 make it seem doubtful that rational, long-term social planning can ever be successful.

138.
Thus it is clear that the human race has at best a very limited capacity for solving even relatively straightforward social problems. How then is it going to solve the far more difficult and subtle problem of reconciling freedom with technology? Technology presents clear-cut material advantages, whereas freedom is an abstraction that means different things to different people, and its loss is easily obscured by propaganda and fancy talk.

139.
And note this important difference: It is conceivable that our environmental problems (for example) may some day be settled through a rational, comprehensive plan, but if this happens it will be only because it is in the long-term interest of the system to solve these problems. But it is not in the interest of the system to preserve freedom or small-group autonomy. On the contrary, it is in the interest of the system to bring human behavior under control to the greatest possible extent. [24] Thus, while practical considerations may eventually force the system to take a rational, prudent approach to environmental problems, equally practical considerations will force the system to regulate human behavior ever more closely (preferably by indirect means that will disguise the encroachment on freedom.) This isn’t just our opinion. Eminent social scientists (e.g. James Q. Wilson) have stressed the importance of “socializing” people more effectively.

Revolution is easier than reform

140.
We hope we have convinced the reader that the system cannot be reformed in such a way as to reconcile freedom with technology. The only way out is to dispense with the industrial-technological system altogether. This implies revolution, not necessarily an armed uprising, but certainly a radical and fundamental change in the nature of society.

141.
People tend to assume that because a revolution involves a much greater change than reform does, it is more difficult to bring about than reform is. Actually, under certain circumstances revolution is much easier than reform. The reason is that a revolutionary movement can inspire an intensity of commitment that a reform movement cannot inspire. A reform movement merely offers to solve a particular social problem. A revolutionary movement offers to solve all problems at one stroke and create a whole new world; it provides the kind of ideal for which people will take great risks and make great sacrifices. For this reason it would be much easier to overthrow the whole technological system than to put effective, permanent restraints on the development or application of any one segment of technology, such as genetic engineering, for example. Not many people will devote themselves with single-minded passion to imposing and maintaining restraints on genetic engineering, but under suitable conditions large numbers of people may devote themselves passionately to a revolution against the industrial-technological system. As we noted in paragraph 132, reformers seeking to limit certain aspects of technology would be working to avoid a negative outcome. But revolutionaries work to gain a powerful reward—fulfillment of their revolutionary vision—and therefore work harder and more persistently than reformers do.

142.
Reform is always restrained by the fear of painful consequences if changes go too far. But once a revolutionary fever has taken hold of a society, people are willing to undergo unlimited hardships for the sake of their revolution. This was clearly shown in the French and Russian Revolutions. It may be that in such cases only a minority of the population is really committed to the revolution, but this minority is sufficiently large and active so that it becomes the dominant force in society. We will have more to say about revolution in paragraphs 180-205.

Control of human behavior

143.
Since the beginning of civilization, organized societies have had to put pressures on human beings for the sake of the functioning of the social organism. The kinds of pressures vary greatly from one society to another. Some of the pressures are physical (poor diet, excessive labor, environmental pollution), some are psychological (noise, crowding, forcing humans behavior into the mold that society requires). In the past, human nature has been approximately constant, or at any rate has varied only within certain bounds. Consequently, societies have been able to push people only up to certain limits. When the limit of human endurance has been passed, things start going wrong: rebellion, or crime, or corruption, or evasion of work, or depression and other mental problems, or an elevated death rate, or a declining birth rate or something else, so that either the society breaks down, or its functioning becomes too inefficient and it is (quickly or gradually, through conquest, attrition or evolution) replaced by some more efficient form of society.[25]

144.
Thus human nature has in the past put certain limits on the development of societies. People could be pushed only so far and no farther. But today this may be changing, because modern technology is developing ways of modifying human beings.

145.
Imagine a society that subjects people to conditions that make them terribly unhappy, then gives them the drugs to take away their unhappiness. Science fiction? It is already happening to some extent in our own society. It is well known that the rate of clinical depression had been greatly increasing in recent decades. We believe that this is due to disruption of the power process, as explained in paragraphs 59-76. But even if we are wrong, the increasing rate of depression is certainly the result of some conditions that exist in today’s society. Instead of removing the conditions that make people depressed, modern society gives them antidepressant drugs. In effect, antidepressants are a means of modifying an individual’s internal state in such a way as to enable him to tolerate social conditions that he would otherwise find intolerable. (Yes, we know that depression is often of purely genetic origin. We are referring here to those cases in which environment plays the predominant role.)

146.
Drugs that affect the mind are only one example of the methods of controlling human behavior that modern society is developing. Let us look at some of the other methods.

147.
To start with, there are the techniques of surveillance. Hidden video cameras are now used in most stores and in many other places, and computers are used to collect and process vast amounts of information about individuals. Information so obtained greatly increases the effectiveness of physical coercion (i.e., law enforcement).[26] Then there are the methods of propaganda, for which the mass communication media provide effective vehicles. Efficient techniques have been developed for winning elections, selling products, influencing public opinion. The entertainment industry serves as an important psychological tool of the system, possibly even when it is dishing out large amounts of sex and violence. Entertainment provides modern man with an essential means of escape. While absorbed in television, videos, etc., he can forget stress, anxiety, frustration, dissatisfaction. Many primitive peoples, when they don’t have work to do, are quite content to sit for hours at a time doing nothing at all, because they are at peace with themselves and their world. But most modern people must be constantly occupied or entertained, otherwise they get “bored,” i.e., they get fidgety, uneasy, irritable.

148.
Other techniques strike deeper than the foregoing. Education is no longer a simple affair of paddling a kid’s behind when he doesn’t know his lessons and patting him on the head when he does know them. It is becoming a scientific technique for controlling the child’s development. Sylvan Learning Centers, for example, have had great success in motivating children to study, and psychological techniques are also used with more or less success in many conventional schools. “Parenting” techniques that are taught to parents are designed to make children accept fundamental values of the system and behave in ways that the system finds desirable. “Mental health” programs, “intervention” techniques, psychotherapy and so forth are ostensibly designed to benefit individuals, but in practice they usually serve as methods for inducing individuals to think and behave as the system requires. (There is no contradiction here; an individual whose attitudes or behavior bring him into conflict with the system is up against a force that is too powerful for him to conquer or escape from, hence he is likely to suffer from stress, frustration, defeat. His path will be much easier if he thinks and behaves as the system requires. In that sense the system is acting for the benefit of the individual when it brainwashes him into conformity.) Child abuse in its gross and obvious forms is disapproved in most if not all cultures. Tormenting a child for a trivial reason or no reason at all is something that appalls almost everyone. But many psychologists interpret the concept of abuse much more broadly. Is spanking, when used as part of a rational and consistent system of discipline, a form of abuse? The question will ultimately be decided by whether or not spanking tends to produce behavior that makes a person fit in well with the existing system of society. In practice, the word “abuse” tends to be interpreted to include any method of child-rearing that produces behavior inconvenient for the system. Thus, when they go beyond the prevention of obvious, senseless cruelty, programs for preventing “child abuse” are directed toward the control of human behavior of the system.

149.
Presumably, research will continue to increase the effectiveness of psychological techniques for controlling human behavior. But we think it is unlikely that psychological techniques alone will be sufficient to adjust human beings to the kind of society that technology is creating. Biological methods probably will have to be used. We have already mentioned the use of drugs in this connection. Neurology may provide other avenues of modifying the human mind. Genetic engineering of human beings is already beginning to occur in the form of “gene therapy,” and there is no reason to assume the such methods will not eventually be used to modify those aspects of the body that affect mental functioning.

150.
As we mentioned in paragraph 134, industrial society seems likely to be entering a period of severe stress, due in part to problems of human behavior and in part to economic and environmental problems. And a considerable proportion of the system’s economic and environmental problems result from the way human beings behave. Alienation, low self-esteem, depression, hostility, rebellion; children who won’t study, youth gangs, illegal drug use, rape, child abuse, other crimes, unsafe sex, teen pregnancy, population growth, political corruption, race hatred, ethnic rivalry, bitter ideological conflict (e.g., pro-choice vs. pro-life), political extremism, terrorism, sabotage, anti-government groups, hate groups. All these threaten the very survival of the system. The system will be forced to use every practical means of controlling human behavior.

151.
The social disruption that we see today is certainly not the result of mere chance. It can only be a result of the conditions of life that the system imposes on people. (We have argued that the most important of these conditions is disruption of the power process.) If the system succeeds in imposing sufficient control over human behavior to assure its own survival, a new watershed in human history will have passed. Whereas formerly the limits of human endurance have imposed limits on the development of societies (as we explained in paragraphs 143, 144), industrial-technological society will be able to pass those limits by modifying human beings, whether by psychological methods or biological methods or both. In the future, social systems will not be adjusted to suit the needs of human beings. Instead, human beings will be adjusted to suit the needs of the system.[27]

152.
Generally speaking, technological control over human behavior will probably not be introduced with a totalitarian intention or even through a conscious desire to restrict human freedom.[28] Each new step in the assertion of control over the human mind will be taken as a rational response to a problem that faces society, such as curing alcoholism, reducing the crime rate or inducing young people to study science and engineering. In many cases, there will be humanitarian justification. For example, when a psychiatrist prescribes an anti-depressant for a depressed patient, he is clearly doing that individual a favor. It would be inhumane to withhold the drug from someone who needs it. When parents send their children to Sylvan Learning Centers to have them manipulated into becoming enthusiastic about their studies, they do so from concern for their children’s welfare. It may be that some of these parents wish that one didn’t have to have specialized training to get a job and that their kid didn’t have to be brainwashed into becoming a computer nerd. But what can they do? They can’t change society, and their child may be unemployable if he doesn’t have certain skills. So they send him to Sylvan.

153.
Thus control over human behavior will be introduced not by a calculated decision of the authorities but through a process of social evolution (rapid evolution, however). The process will be impossible to resist, because each advance, considered by itself, will appear to be beneficial, or at least the evil involved in making the advance will seem to be less than that which would result from not making it (see paragraph 127). Propaganda for example is used for many good purposes, such as discouraging child abuse or race hatred. Sex education is obviously useful, yet the effect of sex education (to the extent that it is successful) is to take the shaping of sexual attitudes away from the family and put it into the hands of the state as represented by the public school system.

154.
Suppose a biological trait is discovered that increases the likelihood that a child will grow up to be a criminal and suppose some sort of gene therapy can remove this trait.[29] Of course most parents whose children possess the trait will have them undergo the therapy. It would be inhumane to do otherwise, since the child would probably have a miserable life if he grew up to be a criminal. But many or most primitive societies have a low crime rate in comparison with that of our society, even though they have neither high-tech methods of child-rearing nor harsh systems of punishment. Since there is no reason to suppose that more modern men than primitive men have innate predatory tendencies, the high crime rate of our society must be due to the pressures that modern conditions put on people, to which many cannot or will not adjust. Thus a treatment designed to remove potential criminal tendencies is at least in part a way of re-engineering people so that they suit the requirements of the system.

155.
Our society tends to regard as a “sickness” any mode of thought or behavior that is inconvenient for the system, and this is plausible because when an individual doesn’t fit into the system it causes pain to the individual as well as problems for the system. Thus the manipulation of an individual to adjust him to the system is seen as a “cure” for a “sickness” and therefore as good.

156.
In paragraph 127 we pointed out that if the use of a new item of technology is initially optional, it does not necessarily remain optional, because the new technology tends to change society in such a way that it becomes difficult or impossible for an individual to function without using that technology. This applies also to the technology of human behavior. In a world in which most children are put through a program to make them enthusiastic about studying, a parent will almost be forced to put his kid through such a program, because if he does not, then the kid will grow up to be, comparatively speaking, an ignoramus and therefore unemployable. Or suppose a biological treatment is discovered that, without undesirable side-effects, will greatly reduce the psychological stress from which so many people suffer in our society. If large numbers of people choose to undergo the treatment, then the general level of stress in society will be reduced, so that it will be possible for the system to increase the stress-producing pressures. In fact, something like this seems to have happened already with one of our society’s most important psychological tools for enabling people to reduce (or at least temporarily escape from) stress, namely, mass entertainment (see paragraph 147). Our use of mass entertainment is “optional”: No law requires us to watch television, listen to the radio, read magazines. Yet mass entertainment is a means of escape and stress-reduction on which most of us have become dependent. Everyone complains about the trashiness of television, but almost everyone watches it. A few have kicked the TV habit, but it would be a rare person who could get along today without using any form of mass entertainment. (Yet until quite recently in human history most people got along very nicely with no other entertainment than that which each local community created for itself.) Without the entertainment industry the system probably would not have been able to get away with putting as much stress-producing pressure on us as it does.

157.
Assuming that industrial society survives, it is likely that technology will eventually acquire something approaching complete control over human behavior. It has been established beyond any rational doubt that human thought and behavior have a largely biological basis. As experimenters have demonstrated, feelings such as hunger, pleasure, anger and fear can be turned on and off by electrical stimulation of appropriate parts of the brain. Memories can be destroyed by damaging parts of the brain or they can be brought to the surface by electrical stimulation. Hallucinations can be induced or moods changed by drugs. There may or may not be an immaterial human soul, but if there is one it clearly is less powerful than the biological mechanisms of human behavior. For if that were not the case then researchers would not be able so easily to manipulate human feelings and behavior with drugs and electrical currents.

158.
It presumably would be impractical for all people to have electrodes inserted in their heads so that they could be controlled by the authorities. But the fact that human thoughts and feelings are so open to biological intervention shows that the problem of controlling human behavior is mainly a technical problem; a problem of neurons, hormones and complex molecules; the kind of problem that is accessible to scientific attack. Given the outstanding record of our society in solving technical problems, it is overwhelmingly probable that great advances will be made in the control of human behavior.

159.
Will public resistance prevent the introduction of technological control of human behavior? It certainly would if an attempt were made to introduce such control all at once. But since technological control will be introduced through a long sequence of small advances, there will be no rational and effective public resistance. (See paragraphs 127,132, 153.)

160.
To those who think that all this sounds like science fiction, we point out that yesterday’s science fiction is today’s fact. The Industrial Revolution has radically altered man’s environment and way of life, and it is only to be expected that as technology is increasingly applied to the human body and mind, man himself will be altered as radically as his environment and way of life have been.

Human race at a crossroads

161.
But we have gotten ahead of our story. It is one thing to develop in the laboratory a series of psychological or biological techniques for manipulating human behavior and quite another to integrate these techniques into a functioning social system. The latter problem is the more difficult of the two. For example, while the techniques of educational psychology doubtless work quite well in the “lab schools” where they are developed, it is not necessarily easy to apply them effectively throughout our educational system. We all know what many of our schools are like. The teachers are too busy taking knives and guns away from the kids to subject them to the latest techniques for making them into computer nerds. Thus, in spite of all its technical advances relating to human behavior the system to date has not been impressively successful in controlling human beings. The people whose behavior is fairly well under the control of the system are those of the type that might be called “bourgeois.” But there are growing numbers of people who in one way or another are rebels against the system: welfare leaches, youth gangs, cultists, nazis, satanists, radical environmentalists, militiaman, etc..

162.
The system is currently engaged in a desperate struggle to overcome certain problems that threaten its survival, among which the problems of human behavior are the most important. If the system succeeds in acquiring sufficient control over human behavior quickly enough, it will probably survive. Otherwise it will break down. We think the issue will most likely be resolved within the next several decades, say 40 to 100 years.

163.
Suppose the system survives the crisis of the next several decades. By that time it will have to have solved, or at least brought under control, the principal problems that confront it, in particular that of “socializing” human beings; that is, making people sufficiently docile so that their behavior no longer threatens the system. That being accomplished, it does not appear that there would be any further obstacle to the development of technology, and it would presumably advance toward its logical conclusion, which is complete control over everything on Earth, including human beings and all other important organisms. The system may become a unitary, monolithic organization, or it may be more or less fragmented and consist of a number of organizations coexisting in a relationship that includes elements of both cooperation and competition, just as today the government, the corporations and other large organizations both cooperate and compete with one another. Human freedom mostly will have vanished, because individuals and small groups will be impotent vis-a-vis large organizations armed with super technology and an arsenal of advanced psychological and biological tools for manipulating human beings, besides instruments of surveillance and physical coercion. Only a small number of people will have any real power, and even these probably will have only very limited freedom, because their behavior too will be regulated; just as today our politicians and corporation executives can retain their positions of power only as long as their behavior remains within certain fairly narrow limits.

164.
Don’t imagine that the systems will stop developing further techniques for controlling human beings and nature once the crisis of the next few decades is over and increasing control is no longer necessary for the system’s survival. On the contrary, once the hard times are over the system will increase its control over people and nature more rapidly, because it will no longer be hampered by difficulties of the kind that it is currently experiencing. Survival is not the principal motive for extending control. As we explained in paragraphs 87-90, technicians and scientists carry on their work largely as a surrogate activity; that is, they satisfy their need for power by solving technical problems. They will continue to do this with unabated enthusiasm, and among the most interesting and challenging problems for them to solve will be those of understanding the human body and mind and intervening in their development. For the “good of humanity,” of course.

165.
But suppose on the other hand that the stresses of the coming decades prove to be too much for the system. If the system breaks down there may be a period of chaos, a “time of troubles” such as those that history has recorded at various epochs in the past. It is impossible to predict what would emerge from such a time of troubles, but at any rate the human race would be given a new chance. The greatest danger is that industrial society may begin to reconstitute itself within the first few years after the breakdown. Certainly there will be many people (power-hungry types especially) who will be anxious to get the factories running again.

166.
Therefore two tasks confront those who hate the servitude to which the industrial system is reducing the human race. First, we must work to heighten the social stresses within the system so as to increase the likelihood that it will break down or be weakened sufficiently so that a revolution against it becomes possible. Second, it is necessary to develop and propagate an ideology that opposes technology and the industrial society if and when the system becomes sufficiently weakened. And such an ideology will help to assure that, if and when industrial society breaks down, its remnants will be smashed beyond repair, so that the system cannot be reconstituted. The factories should be destroyed, technical books burned, etc.

Human suffering

167.
The industrial system will not break down purely as a result of revolutionary action. It will not be vulnerable to revolutionary attack unless its own internal problems of development lead it into very serious difficulties. So if the system breaks down it will do so either spontaneously, or through a process that is in part spontaneous but helped along by revolutionaries. If the breakdown is sudden, many people will die, since the world’s population has become so overblown that it cannot even feed itself any longer without advanced technology. Even if the breakdown is gradual enough so that reduction of the population can occur more through lowering of the birth rate than through elevation of the death rate, the process of de-industrialization probably will be very chaotic and involve much suffering. It is naive to think it likely that technology can be phased out in a smoothly managed orderly way, especially since the technophiles will fight stubbornly at every step. Is it therefore cruel to work for the breakdown of the system? Maybe, but maybe not. In the first place, revolutionaries will not be able to break the system down unless it is already in deep trouble so that there would be a good chance of its eventually breaking down by itself anyway; and the bigger the system grows, the more disastrous the consequences of its breakdown will be; so it may be that revolutionaries, by hastening the onset of the breakdown will be reducing the extent of the disaster.

168.
In the second place, one has to balance the struggle and death against the loss of freedom and dignity. To many of us, freedom and dignity are more important than a long life or avoidance of physical pain. Besides, we all have to die some time, and it may be better to die fighting for survival, or for a cause, than to live a long but empty and purposeless life.

169.
In the third place, it is not all certain that the survival of the system will lead to less suffering than the breakdown of the system would. The system has already caused, and is continuing to cause, immense suffering all over the world. Ancient cultures, that for hundreds of years gave people a satisfactory relationship with each other and their environment, have been shattered by contact with industrial society, and the result has been a whole catalogue of economic, environmental, social and psychological problems. One of the effects of the intrusion of industrial society has been that over much of the world traditional controls on population have been thrown out of balance. Hence the population explosion, with all that it implies. Then there is the psychological suffering that is widespread throughout the supposedly fortunate countries of the West (see paragraphs 44, 45). No one knows what will happen as a result of ozone depletion, the greenhouse effect and other environmental problems that cannot yet be foreseen. And, as nuclear proliferation has shown, new technology cannot be kept out of the hands of dictators and irresponsible Third World nations. Would you like to speculate about what Iraq or North Korea will do with genetic engineering?

170.
“Oh!” say the technophiles, “Science is going to fix all that! We will conquer famine, eliminate psychological suffering, make everybody healthy and happy!” Yeah, sure. That’s what they said 200 years ago. The Industrial Revolution was supposed to eliminate poverty, make everybody happy, etc. The actual result has been quite different. The technophiles are hopelessly naive (or self-deceiving) in their understanding of social problems. They are unaware of (or choose to ignore) the fact that when large changes, even seemingly beneficial ones, are introduced into a society, they lead to a long sequence of other changes, most of which are impossible to predict (paragraph 103). The result is disruption of the society. So it is very probable that in their attempt to end poverty and disease, engineer docile, happy personalities and so forth, the technophiles will create social systems that are terribly troubled, even more so than the present one. For example, the scientists boast that they will end famine by creating new, genetically engineered food plants. But this will allow the human population to keep expanding indefinitely, and it is well known that crowding leads to increased stress and aggression. This is merely one example of the predictable problems that will arise. We emphasize that, as past experience has shown, technical progress will lead to other new problems for society far more rapidly that it has been solving old ones. Thus it will take a long difficult period of trial and error for the technophiles to work the bugs out of their Brave New World (if they ever do). In the meantime there will be great suffering. So it is not all clear that the survival of industrial society would involve less suffering than the breakdown of that society would. Technology has gotten the human race into a fix from which there is not likely to be any easy escape.

The future

171.
But suppose now that industrial society does survive the next several decades and that the bugs do eventually get worked out of the system, so that it functions smoothly. What kind of system will it be? We will consider several possibilities.

172.
First let us postulate that the computer scientists succeed in developing intelligent machines that can do all things better than human beings can do them. In that case presumably all work will be done by vast, highly organized systems of machines and no human effort will be necessary. Either of two cases might occur. The machines might be permitted to make all of their own decisions without human oversight, or else human control over the machines might be retained.

173.
If the machines are permitted to make all their own decisions, we can’t make any conjectures as to the results, because it is impossible to guess how such machines might behave. We only point out that the fate of the human race would be at the mercy of the machines. It might be argued that the human race would never be foolish enough to hand over all the power to the machines. But we are suggesting neither that the human race would voluntarily turn power over to the machines nor that the machines would willfully seize power. What we do suggest is that the human race might easily permit itself to drift into a position of such dependence on the machines that it would have no practical choice but to accept all of the machines’ decisions. As society and the problems that face it become more and more complex and machines become more and more intelligent, people will let machines make more of their decisions for them, simply because machine-made decisions will bring better result than man-made ones. Eventually a stage may be reached at which the decisions necessary to keep the system running will be so complex that human beings will be incapable of making them intelligently. At that stage the machines will be in effective control. People won’t be able to just turn the machines off, because they will be so dependent on them that turning them off would amount to suicide.

174.
On the other hand it is possible that human control over the machines may be retained. In that case the average man may have control over certain private machines of his own, such as his car or his personal computer, but control over large systems of machines will be in the hands of a tiny elite—just as it is today, but with two differences. Due to improved techniques the elite will have greater control over the masses; and because human work will no longer be necessary the masses will be superfluous, a useless burden on the system. If the elite is ruthless they may simply decide to exterminate the mass of humanity. If they are humane they may use propaganda or other psychological or biological techniques to reduce the birth rate until the mass of humanity becomes extinct, leaving the world to the elite. Or, if the elite consist of soft-hearted liberals, they may decide to play the role of good shepherds to the rest of the human race. They will see to it that everyone’s physical needs are satisfied, that all children are raised under psychologically hygienic conditions, that everyone has a wholesome hobby to keep him busy, and that anyone who may become dissatisfied undergoes “treatment” to cure his “problem.” Of course, life will be so purposeless that people will have to be biologically or psychologically engineered either to remove their need for the power process or to make them “sublimate” their drive for power into some harmless hobby. These engineered human beings may be happy in such a society, but they most certainly will not be free. They will have been reduced to the status of domestic animals.

175.
But suppose now that the computer scientists do not succeed in developing artificial intelligence, so that human work remains necessary. Even so, machines will take care of more and more of the simpler tasks so that there will be an increasing surplus of human workers at the lower levels of ability. (We see this happening already. There are many people who find it difficult or impossible to get work, because for intellectual or psychological reasons they cannot acquire the level of training necessary to make themselves useful in the present system.) On those who are employed, ever-increasing demands will be placed; They will need more and more training, more and more ability, and will have to be ever more reliable, conforming and docile, because they will be more and more like cells of a giant organism. Their tasks will be increasingly specialized so that their work will be, in a sense, out of touch with the real world, being concentrated on one tiny slice of reality. The system will have to use any means that it can, whether psychological or biological, to engineer people to be docile, to have the abilities that the system requires and to “sublimate” their drive for power into some specialized task. But the statement that the people of such a society will have to be docile may require qualification. The society may find competitiveness useful, provided that ways are found of directing competitiveness into channels that serve that needs of the system. We can imagine a future society in which there is endless competition for positions of prestige and power. But no more than a very few people will ever reach the top, where the only real power is (see end of paragraph 163). Very repellent is a society in which a person can satisfy his needs for power only by pushing large numbers of other people out of the way and depriving them of their opportunity for power.

176.
One can envision scenarios that incorporate aspects of more than one of the possibilities that we have just discussed. For instance, it may be that machines will take over most of the work that is of real, practical importance, but that human beings will be kept busy by being given relatively unimportant work. It has been suggested, for example, that a great development of the service industries might provide work for human beings. Thus people will spend their time shining each others shoes, driving each other around in taxicabs, making handicrafts for one another, waiting on each other’s tables, etc. This seems to us a thoroughly contemptible way for the human race to end up, and we doubt that many people would find fulfilling lives in such pointless busy-work. They would seek other, dangerous outlets (drugs, crime, “cults,” hate groups) unless they were biologically or psychologically engineered to adapt to such a way of life.

177.
Needless to say, the scenarios outlined above do not exhaust all the possibilities. They only indicate the kinds of outcomes that seem to us most likely. But we can envision no plausible scenarios that are any more palatable than the ones we’ve just described. It is overwhelmingly probable that if the industrial-technological system survives the next 40 to 100 years, it will by that time have developed certain general characteristics: Individuals (at least those of the “bourgeois” type, who are integrated into the system and make it run, and who therefore have all the power) will be more dependent than ever on large organizations; they will be more “socialized” than ever and their physical and mental qualities to a significant extent (possibly to a very great extent) will be those that are engineered into them rather than being the results of chance (or of God’s will, or whatever); and whatever may be left of wild nature will be reduced to remnants preserved for scientific study and kept under the supervision and management of scientists (hence it will no longer be truly wild). In the long run (say a few centuries from now) it is likely that neither the human race nor any other important organisms will exist as we know them today, because once you start modifying organisms through genetic engineering there is no reason to stop at any particular point, so that the modifications will probably continue until man and other organisms have been utterly transformed.

178.
Whatever else may be the case, it is certain that technology is creating for human beings a new physical and social environment radically different from the spectrum of environments to which natural selection has adapted the human race physically and psychologically. If man is not adjusted to this new environment by being artificially re-engineered, then he will be adapted to it through a long and painful process of natural selection. The former is far more likely than the latter.

179.
It would be better to dump the whole stinking system and take the consequences.

Strategy

180.
The technophiles are taking us all on an utterly reckless ride into the unknown. Many people understand something of what technological progress is doing to us yet take a passive attitude toward it because they think it is inevitable. But we (FC) don’t think it is inevitable. We think it can be stopped, and we will give here some indications of how to go about stopping it.

181.
As we stated in paragraph 166, the two main tasks for the present are to promote social stress and instability in industrial society and to develop and propagate an ideology that opposes technology and the industrial system. When the system becomes sufficiently stressed and unstable, a revolution against technology may be possible. The pattern would be similar to that of the French and Russian Revolutions. French society and Russian society, for several decades prior to their respective revolutions, showed increasing signs of stress and weakness. Meanwhile, ideologies were being developed that offered a new world view that was quite different from the old one. In the Russian case, revolutionaries were actively working to undermine the old order. Then, when the old system was put under sufficient additional stress (by financial crisis in France, by military defeat in Russia) it was swept away by revolution. What we propose is something along the same lines.

182.
It will be objected that the French and Russian Revolutions were failures. But most revolutions have two goals. One is to destroy an old form of society and the other is to set up the new form of society envisioned by the revolutionaries. The French and Russian revolutionaries failed (fortunately!) to create the new kind of society of which they dreamed, but they were quite successful in destroying the existing form of society.

183.
But an ideology, in order to gain enthusiastic support, must have a positive ideal as well as a negative one; it must be for something as well as against something. The positive ideal that we propose is Nature. That is, wild nature; those aspects of the functioning of the Earth and its living things that are independent of human management and free of human interference and control. And with wild nature we include human nature, by which we mean those aspects of the functioning of the human individual that are not subject to regulation by organized society but are products of chance, or free will, or God (depending on your religious or philosophical opinions).

184.
Nature makes a perfect counter-ideal to technology for several reasons. Nature (that which is outside the power of the system) is the opposite of technology (which seeks to expand indefinitely the power of the system). Most people will agree that nature is beautiful; certainly it has tremendous popular appeal. The radical environmentalists already hold an ideology that exalts nature and opposes technology.[30] It is not necessary for the sake of nature to set up some chimerical utopia or any new kind of social order. Nature takes care of itself: It was a spontaneous creation that existed long before any human society, and for countless centuries many different kinds of human societies coexisted with nature without doing it an excessive amount of damage. Only with the Industrial Revolution did the effect of human society on nature become really devastating. To relieve the pressure on nature it is not necessary to create a special kind of social system, it is only necessary to get rid of industrial society. Granted, this will not solve all problems. Industrial society has already done tremendous damage to nature and it will take a very long time for the scars to heal. Besides, even pre-industrial societies can do significant damage to nature. Nevertheless, getting rid of industrial society will accomplish a great deal. It will relieve the worst of the pressure on nature so that the scars can begin to heal. It will remove the capacity of organized society to keep increasing its control over nature (including human nature). Whatever kind of society may exist after the demise of the industrial system, it is certain that most people will live close to nature, because in the absence of advanced technology there is no other way that people can live. To feed themselves they must be peasants or herdsmen or fishermen or hunters, etc.. And, generally speaking, local autonomy should tend to increase, because lack of advanced technology and rapid communications will limit the capacity of governments or other large organizations to control local communities.

185.
As for the negative consequences of eliminating industrial society—well, you can’t eat your cake and have it too. To gain one thing you have to sacrifice another.

186.
Most people hate psychological conflict. For this reason they avoid doing any serious thinking about difficult social issues, and they like to have such issues presented to them in simple, black-and-white terms: this is all good and that is all bad. The revolutionary ideology should therefore be developed on two levels.

187.
On the more sophisticated level the ideology should address itself to people who are intelligent, thoughtful and rational. The object should be to create a core of people who will be opposed to the industrial system on a rational, thought-out basis, with full appreciation of the problems and ambiguities involved, and of the price that has to be paid for getting rid of the system. It is particularly important to attract people of this type, as they are capable people and will be instrumental in influencing others. These people should be addressed on as rational a level as possible. Facts should never intentionally be distorted and intemperate language should be avoided. This does not mean that no appeal can be made to the emotions, but in making such appeal care should be taken to avoid misrepresenting the truth or doing anything else that would destroy the intellectual respectability of the ideology.

188.
On a second level, the ideology should be propagated in a simplified form that will enable the unthinking majority to see the conflict of technology vs. nature in unambiguous terms. But even on this second level the ideology should not be expressed in language that is so cheap, intemperate or irrational that it alienates people of the thoughtful and rational type. Cheap, intemperate propaganda sometimes achieves impressive short-term gains, but it will be more advantageous in the long run to keep the loyalty of a small number of intelligently committed people than to arouse the passions of an unthinking, fickle mob who will change their attitude as soon as someone comes along with a better propaganda gimmick. However, propaganda of the rabble-rousing type may be necessary when the system is nearing the point of collapse and there is a final struggle between rival ideologies to determine which will become dominant when the old world-view goes under.

189.
Prior to that final struggle, the revolutionaries should not expect to have a majority of people on their side. History is made by active, determined minorities, not by the majority, which seldom has a clear and consistent idea of what it really wants. Until the time comes for the final push toward revolution[31], the task of revolutionaries will be less to win the shallow support of the majority than to build a small core of deeply committed people. As for the majority, it will be enough to make them aware of the existence of the new ideology and remind them of it frequently; though of course it will be desirable to get majority support to the extent that this can be done without weakening the core of seriously committed people.

190.
Any kind of social conflict helps to destabilize the system, but one should be careful about what kind of conflict one encourages. The line of conflict should be drawn between the mass of the people and the power-holding elite of industrial society (politicians, scientists, upper-level business executives, government officials, etc..). It should not be drawn between the revolutionaries and the mass of the people. For example, it would be bad strategy for the revolutionaries to condemn Americans for their habits of consumption. Instead, the average American should be portrayed as a victim of the advertising and marketing industry, which has suckered him into buying a lot of junk that he doesn’t need and that is very poor compensation for his lost freedom. Either approach is consistent with the facts. It is merely a matter of attitude whether you blame the advertising industry for manipulating the public or blame the public for allowing itself to be manipulated. As a matter of strategy one should generally avoid blaming the public.

191.
One should think twice before encouraging any other social conflict than that between the power-holding elite (which wields technology) and the general public (over which technology exerts its power). For one thing, other conflicts tend to distract attention from the important conflicts (between power-elite and ordinary people, between technology and nature); for another thing, other conflicts may actually tend to encourage technologization, because each side in such a conflict wants to use technological power to gain advantages over its adversary. This is clearly seen in rivalries between nations. It also appears in ethnic conflicts within nations. For example, in America many black leaders are anxious to gain power for African Americans by placing black individuals in the technological power-elite. They want there to be many black government officials, scientists, corporation executives and so forth. In this way they are helping to absorb the African American subculture into the technological system. Generally speaking, one should encourage only those social conflicts that can be fitted into the framework of the conflicts of power-elite vs. ordinary people, technology vs nature.

192.
But the way to discourage ethnic conflict is not through militant advocacy of minority rights (see paragraphs 21, 29). Instead, the revolutionaries should emphasize that although minorities do suffer more or less disadvantage, this disadvantage is of peripheral significance. Our real enemy is the industrial-technological system, and in the struggle against the system, ethnic distinctions are of no importance.

193.
The kind of revolution we have in mind will not necessarily involve an armed uprising against any government. It may or may not involve physical violence, but it will not be a political revolution. Its focus will be on technology and economics, not politics.[32]

194.
Probably the revolutionaries should even avoid assuming political power, whether by legal or illegal means, until the industrial system is stressed to the danger point and has proved itself to be a failure in the eyes of most people. Suppose for example that some “green” party should win control of the United States Congress in an election. In order to avoid betraying or watering down their own ideology they would have to take vigorous measures to turn economic growth into economic shrinkage. To the average man the results would appear disastrous: There would be massive unemployment, shortages of commodities, etc. Even if the grosser ill effects could be avoided through superhumanly skillful management, still people would have to begin giving up the luxuries to which they have become addicted. Dissatisfaction would grow, the “green” party would be voted out of office and the revolutionaries would have suffered a severe setback. For this reason the revolutionaries should not try to acquire political power until the system has gotten itself into such a mess that any hardships will be seen as resulting from the failures of the industrial system itself and not from the policies of the revolutionaries. The revolution against technology will probably have to be a revolution by outsiders, a revolution from below and not from above.

195.
The revolution must be international and worldwide. It cannot be carried out on a nation-by-nation basis. Whenever it is suggested that the United States, for example, should cut back on technological progress or economic growth, people get hysterical and start screaming that if we fall behind in technology the Japanese will get ahead of us. Holy robots! The world will fly off its orbit if the Japanese ever sell more cars than we do! (Nationalism is a great promoter of technology.) More reasonably, it is argued that if the relatively democratic nations of the world fall behind in technology while nasty, dictatorial nations like China, Vietnam and North Korea continue to progress, eventually the dictators may come to dominate the world. That is why the industrial system should be attacked in all nations simultaneously, to the extent that this may be possible. True, there is no assurance that the industrial system can be destroyed at approximately the same time all over the world, and it is even conceivable that the attempt to overthrow the system could lead instead to the domination of the system by dictators. That is a risk that has to be taken. And it is worth taking, since the difference between a “democratic” industrial system and one controlled by dictators is small compared with the difference between an industrial system and a non-industrial one.[33] It might even be argued that an industrial system controlled by dictators would be preferable, because dictator-controlled systems usually have proved inefficient, hence they are presumably more likely to break down. Look at Cuba.

196.
Revolutionaries might consider favoring measures that tend to bind the world economy into a unified whole. Free trade agreements like NAFTA and GATT are probably harmful to the environment in the short run, but in the long run they may perhaps be advantageous because they foster economic interdependence between nations. It will be easier to destroy the industrial system on a worldwide basis if the world economy is so unified that its breakdown in any one major nation will lead to its breakdown in all industrialized nations.

197.
Some people take the line that modern man has too much power, too much control over nature; they argue for a more passive attitude on the part of the human race. At best these people are expressing themselves unclearly, because they fail to distinguish between power for large organizations and power for individuals and small groups. It is a mistake to argue for powerlessness and passivity, because people need power. Modern man as a collective entity—that is, the industrial system—has immense power over nature, and we (FC) regard this as evil. But modern individuals and small groups of individuals have far less power than primitive man ever did. Generally speaking, the vast power of “modern man” over nature is exercised not by individuals or small groups but by large organizations. To the extent that the average modern individual can wield the power of technology, he is permitted to do so only within narrow limits and only under the supervision and control of the system. (You need a license for everything and with the license come rules and regulations). The individual has only those technological powers with which the system chooses to provide him. His personal power over nature is slight.

198.
Primitive individuals and small groups actually had considerable power over nature; or maybe it would be better to say power within nature. When primitive man needed food he knew how to find and prepare edible roots, how to track game and take it with homemade weapons. He knew how to protect himself from heat, cold, rain, dangerous animals, etc. But primitive man did relatively little damage to nature because the collective power of primitive society was negligible compared to the collective power of industrial society.

199.
Instead of arguing for powerlessness and passivity, one should argue that the power of the industrial system should be broken, and that this will greatly increase the power and freedom of individuals and small groups.

200.
Until the industrial system has been thoroughly wrecked, the destruction of that system must be the revolutionaries’ only goal. Other goals would distract attention and energy from the main goal. More importantly, if the revolutionaries permit themselves to have any other goal than the destruction of technology, they will be tempted to use technology as a tool for reaching that other goal. If they give in to that temptation, they will fall right back into the technological trap, because modern technology is a unified, tightly organized system, so that, in order to retain some technology, one finds oneself obliged to retain most technology, hence one ends up sacrificing only token amounts of technology.

201.
Suppose for example that the revolutionaries took “social justice” as a goal. Human nature being what it is, social justice would not come about spontaneously; it would have to be enforced. In order to enforce it the revolutionaries would have to retain central organization and control. For that they would need rapid long-distance transportation and communication, and therefore all the technology needed to support the transportation and communication systems. To feed and clothe poor people they would have to use agricultural and manufacturing technology. And so forth. So that the attempt to insure social justice would force them to retain most parts of the technological system. Not that we have anything against social justice, but it must not be allowed to interfere with the effort to get rid of the technological system.

202.
It would be hopeless for revolutionaries to try to attack the system without using some modern technology. If nothing else they must use the communications media to spread their message. But they should use modern technology for only one purpose: to attack the technological system.

203.
Imagine an alcoholic sitting with a barrel of wine in front of him. Suppose he starts saying to himself, “Wine isn’t bad for you if used in moderation. Why, they say small amounts of wine are even good for you! It won’t do me any harm if I take just one little drink…” Well you know what is going to happen. Never forget that the human race with technology is just like an alcoholic with a barrel of wine.

204.
Revolutionaries should have as many children as they can. There is strong scientific evidence that social attitudes are to a significant extent inherited. No one suggests that a social attitude is a direct outcome of a person’s genetic constitution, but it appears that personality traits tend, within the context of our society, to make a person more likely to hold this or that social attitude. Objections to these findings have been raised, but objections are feeble and seem to be ideologically motivated. In any event, no one denies that children tend on the average to hold social attitudes similar to those of their parents. From our point of view it doesn’t matter all that much whether the attitudes are passed on genetically or through childhood training. In either case they are passed on.

205.
The trouble is that many of the people who are inclined to rebel against the industrial system are also concerned about the population problems, hence they are apt to have few or no children. In this way they may be handing the world over to the sort of people who support or at least accept the industrial system. To insure the strength of the next generation of revolutionaries the present generation must reproduce itself abundantly. In doing so they will be worsening the population problem only slightly. And the most important problem is to get rid of the industrial system, because once the industrial system is gone the world’s population necessarily will decrease (see paragraph 167); whereas, if the industrial system survives, it will continue developing new techniques of food production that may enable the world’s population to keep increasing almost indefinitely.

206.
With regard to revolutionary strategy, the only points on which we absolutely insist are that the single overriding goal must be the elimination of modern technology, and that no other goal can be allowed to compete with this one. For the rest, revolutionaries should take an empirical approach. If experience indicates that some of the recommendations made in the foregoing paragraphs are not going to give good results, then those recommendations should be discarded.

Two kinds of technology

207.
An argument likely to be raised against our proposed revolution is that it is bound to fail, because (it is claimed) throughout history technology has always progressed, never regressed, hence technological regression is impossible. But this claim is false.

208.
We distinguish between two kinds of technology, which we will call small-scale technology and organization-dependent technology. Small-scale technology is technology that can be used by small-scale communities without outside assistance. Organization-dependent technology is technology that depends on large-scale social organization. We are aware of no significant cases of regression in small-scale technology. But organization-dependent technology does regress when the social organization on which it depends breaks down. Example: When the Roman Empire fell apart the Romans’ small-scale technology survived because any clever village craftsman could build, for instance, a water wheel, any skilled smith could make steel by Roman methods, and so forth. But the Romans’ organization-dependent technology did regress. Their aqueducts fell into disrepair and were never rebuilt. Their techniques of road construction were lost. The Roman system of urban sanitation was forgotten, so that only until rather recent times did the sanitation of European cities equal that of Ancient Rome.

209.
The reason why technology has seemed always to progress is that, until perhaps a century or two before the Industrial Revolution, most technology was small-scale technology. But most of the technology developed since the Industrial Revolution is organization-dependent technology. Take the refrigerator for example. Without factory-made parts or the facilities of a post-industrial machine shop it would be virtually impossible for a handful of local craftsmen to build a refrigerator. If by some miracle they did succeed in building one it would be useless to them without a reliable source of electric power. So they would have to dam a stream and build a generator. Generators require large amounts of copper wire. Imagine trying to make that wire without modern machinery. And where would they get a gas suitable for refrigeration? It would be much easier to build an ice house or preserve food by drying or pickling, as was done before the invention of the refrigerator.

210.
So it is clear that if the industrial system were once thoroughly broken down, refrigeration technology would quickly be lost. The same is true of other organization-dependent technology. And once this technology had been lost for a generation or so it would take centuries to rebuild it, just as it took centuries to build it the first time around. Surviving technical books would be few and scattered. An industrial society, if built from scratch without outside help, can only be built in a series of stages: You need tools to make tools to make tools to make tools … . A long process of economic development and progress in social organization is required. And, even in the absence of an ideology opposed to technology, there is no reason to believe that anyone would be interested in rebuilding industrial society. The enthusiasm for “progress” is a phenomenon particular to the modern form of society, and it seems not to have existed prior to the 17th century or thereabouts.

211.
In the late Middle Ages there were four main civilizations that were about equally “advanced”: Europe, the Islamic world, India, and the Far East (China, Japan, Korea). Three of those civilizations remained more or less stable, and only Europe became dynamic. No one knows why Europe became dynamic at that time; historians have their theories but these are only speculation. At any rate, it is clear that rapid development toward a technological form of society occurs only under special conditions. So there is no reason to assume that long-lasting technological regression cannot be brought about.

212.
Would society eventually develop again toward an industrial-technological form? Maybe, but there is no use in worrying about it, since we can’t predict or control events 500 or 1,000 years in the future. Those problems must be dealt with by the people who will live at that time.

The danger of leftism

213.
Because of their need for rebellion and for membership in a movement, leftists or persons of similar psychological type are often attracted to a rebellious or activist movement whose goals and membership are not initially leftist. The resulting influx of leftish types can easily turn a non-leftist movement into a leftist one, so that leftist goals replace or distort the original goals of the movement.

214.
To avoid this, a movement that exalts nature and opposes technology must take a resolutely anti-leftist stance and must avoid all collaboration with leftists. Leftism is in the long run inconsistent with wild nature, with human freedom and with the elimination of modern technology. Leftism is collectivist; it seeks to bind together the entire world (both nature and the human race) into a unified whole. But this implies management of nature and of human life by organized society, and it requires advanced technology. You can’t have a united world without rapid transportation and communication, you can’t make all people love one another without sophisticated psychological techniques, you can’t have a “planned society” without the necessary technological base. Above all, leftism is driven by the need for power, and the leftist seeks power on a collective basis, through identification with a mass movement or an organization. Leftism is unlikely ever to give up technology, because technology is too valuable a source of collective power.

215.
The anarchist[34] too seeks power, but he seeks it on an individual or small-group basis; he wants individuals and small groups to be able to control the circumstances of their own lives. He opposes technology because it makes small groups dependent on large organizations.

216.
Some leftists may seem to oppose technology, but they will oppose it only so long as they are outsiders and the technological system is controlled by non-leftists. If leftism ever becomes dominant in society, so that the technological system becomes a tool in the hands of leftists, they will enthusiastically use it and promote its growth. In doing this they will be repeating a pattern that leftism has shown again and again in the past. When the Bolsheviks in Russia were outsiders, they vigorously opposed censorship and the secret police, they advocated self-determination for ethnic minorities, and so forth; but as soon as they came into power themselves, they imposed a tighter censorship and created a more ruthless secret police than any that had existed under the Tsars, and they oppressed ethnic minorities at least as much as the Tsars had done. In the United States, a couple of decades ago when leftists were a minority in our universities, leftist professors were vigorous proponents of academic freedom, but today, in those universities where leftists have become dominant, they have shown themselves ready to take away from everyone else’s academic freedom. (This is “political correctness.”) The same will happen with leftists and technology: They will use it to oppress everyone else if they ever get it under their own control.

217.
In earlier revolutions, leftists of the most power-hungry type, repeatedly, have first cooperated with non-leftist revolutionaries, as well as with leftists of a more libertarian inclination, and later have double-crossed them to seize power for themselves. Robespierre did this in the French Revolution, the Bolsheviks did it in the Russian Revolution, the communists did it in Spain in 1938 and Castro and his followers did it in Cuba. Given the past history of leftism, it would be utterly foolish for non-leftist revolutionaries today to collaborate with leftists.

218.
Various thinkers have pointed out that leftism is a kind of religion. Leftism is not a religion in the strict sense because leftist doctrine does not postulate the existence of any supernatural being. But for the leftist, leftism plays a psychological role much like that which religion plays for some people. The leftist needs to believe in leftism; it plays a vital role in his psychological economy. His beliefs are not easily modified by logic or facts. He has a deep conviction that leftism is morally Right with a capital R, and that he has not only a right but a duty to impose leftist morality on everyone. (However, many of the people we are referring to as “leftists” do not think of themselves as leftists and would not describe their system of beliefs as leftism. We use the term “leftism” because we don’t know of any better words to designate the spectrum of related creeds that includes the feminist, gay rights, political correctness, etc., movements, and because these movements have a strong affinity with the old left. See paragraphs 227-230.)

219.
Leftism is totalitarian force. Wherever leftism is in a position of power it tends to invade every private corner and force every thought into a leftist mold. In part this is because of the quasi-religious character of leftism; everything contrary to leftists beliefs represents Sin. More importantly, leftism is a totalitarian force because of the leftists’ drive for power. The leftist seeks to satisfy his need for power through identification with a social movement and he tries to go through the power process by helping to pursue and attain the goals of the movement (see paragraph 83). But no matter how far the movement has gone in attaining its goals the leftist is never satisfied, because his activism is a surrogate activity (see paragraph 41). That is, the leftist’s real motive is not to attain the ostensible goals of leftism; in reality he is motivated by the sense of power he gets from struggling for and then reaching a social goal.[35] Consequently the leftist is never satisfied with the goals he has already attained; his need for the power process leads him always to pursue some new goal. The leftist wants equal opportunities for minorities. When that is attained he insists on statistical equality of achievement by minorities. And as long as anyone harbors in some corner of his mind a negative attitude toward some minority, the leftist has to re-educate him. And ethnic minorities are not enough; no one can be allowed to have a negative attitude toward homosexuals, disabled people, fat people, old people, ugly people, and on and on and on. It’s not enough that the public should be informed about the hazards of smoking; a warning has to be stamped on every package of cigarettes. Then cigarette advertising has to be restricted if not banned. The activists will never be satisfied until tobacco is outlawed, and after that it will be alcohol then junk food, etc. Activists have fought gross child abuse, which is reasonable. But now they want to stop all spanking. When they have done that they will want to ban something else they consider unwholesome, then another thing and then another. They will never be satisfied until they have complete control over all child rearing practices. And then they will move on to another cause.

220.
Suppose you asked leftists to make a list of all the things that were wrong with society, and then suppose you instituted every social change that they demanded. It is safe to say that within a couple of years the majority of leftists would find something new to complain about, some new social “evil” to correct because, once again, the leftist is motivated less by distress at society’s ills than by the need to satisfy his drive for power by imposing his solutions on society.

221.
Because of the restrictions placed on their thoughts and behavior by their high level of socialization, many leftists of the over-socialized type cannot pursue power in the ways that other people do. For them the drive for power has only one morally acceptable outlet, and that is in the struggle to impose their morality on everyone.

222.
Leftists, especially those of the oversocialized type, are True Believers in the sense of Eric Hoffer’s book, “The True Believer.” But not all True Believers are of the same psychological type as leftists. Presumably a true believing Nazi, for instance, is very different psychologically from a true believing leftist. Because of their capacity for single-minded devotion to a cause, True Believers are a useful, perhaps a necessary, ingredient of any revolutionary movement. This presents a problem with which we must admit we don’t know how to deal. We aren’t sure how to harness the energies of the True Believer to a revolution against technology. At present all we can say is that no True Believer will make a safe recruit to the revolution unless his commitment is exclusively to the destruction of technology. If he is committed also to another ideal, he may want to use technology as a tool for pursuing that other ideal (see paragraphs 220, 221).

223.
Some readers may say, “This stuff about leftism is a lot of crap. I know John and Jane who are leftish types and they don’t have all these totalitarian tendencies.” It’s quite true that many leftists, possibly even a numerical majority, are decent people who sincerely believe in tolerating others’ values (up to a point) and wouldn’t want to use high-handed methods to reach their social goals. Our remarks about leftism are not meant to apply to every individual leftist but to describe the general character of leftism as a movement. And the general character of a movement is not necessarily determined by the numerical proportions of the various kinds of people involved in the movement.

224.
The people who rise to positions of power in leftist movements tend to be leftists of the most power-hungry type because power-hungry people are those who strive hardest to get into positions of power. Once the power-hungry types have captured control of the movement, there are many leftists of a gentler breed who inwardly disapprove of many of the actions of the leaders, but cannot bring themselves to oppose them. They need their faith in the movement, and because they cannot give up this faith they go along with the leaders. True, some leftists do have the guts to oppose the totalitarian tendencies that emerge, but they generally lose, because the power-hungry types are better organized, are more ruthless and Machiavellian and have taken care to build themselves a strong power base.

225.
These phenomena appeared clearly in Russia and other countries that were taken over by leftists. Similarly, before the breakdown of communism in the USSR, leftish types in the West would seldom criticize that country. If prodded they would admit that the USSR did many wrong things, but then they would try to find excuses for the communists and begin talking about the faults of the West. They always opposed Western military resistance to communist aggression. Leftish types all over the world vigorously protested the U.S. military action in Vietnam, but when the USSR invaded Afghanistan they did nothing. Not that they approved of the Soviet actions; but because of their leftist faith, they just couldn’t bear to put themselves in opposition to communism. Today, in those of our universities where “political correctness” has become dominant, there are probably many leftish types who privately disapprove of the suppression of academic freedom, but they go along with it anyway.

226.
Thus the fact that many individual leftists are personally mild and fairly tolerant people by no means prevents leftism as a whole form having a totalitarian tendency.

227.
Our discussion of leftism has a serious weakness. It is still far from clear what we mean by the word “leftist.” There doesn’t seem to be much we can do about this. Today leftism is fragmented into a whole spectrum of activist movements. Yet not all activist movements are leftist, and some activist movements (e.g., radical environmentalism) seem to include both personalities of the leftist type and personalities of thoroughly un-leftist types who ought to know better than to collaborate with leftists. Varieties of leftists fade out gradually into varieties of non-leftists and we ourselves would often be hard-pressed to decide whether a given individual is or is not a leftist. To the extent that it is defined at all, our conception of leftism is defined by the discussion of it that we have given in this article, and we can only advise the reader to use his own judgment in deciding who is a leftist.

228.
But it will be helpful to list some criteria for diagnosing leftism. These criteria cannot be applied in a cut and dried manner. Some individuals may meet some of the criteria without being leftists, some leftists may not meet any of the criteria. Again, you just have to use your judgment.

229.
The leftist is oriented toward large scale collectivism. He emphasizes the duty of the individual to serve society and the duty of society to take care of the individual. He has a negative attitude toward individualism. He often takes a moralistic tone. He tends to be for gun control, for sex education and other psychologically “enlightened” educational methods, for planning, for affirmative action, for multiculturalism. He tends to identify with victims. He tends to be against competition and against violence, but he often finds excuses for those leftists who do commit violence. He is fond of using the common catch-phrases of the left like “racism,” “sexism,” “homophobia,” “capitalism,” “imperialism,” “neocolonialism,” “genocide,” “social change,” “social justice,” “social responsibility.” Maybe the best diagnostic trait of the leftist is his tendency to sympathize with the following movements: feminism, gay rights, ethnic rights, disability rights, animal rights, political correctness. Anyone who strongly sympathizes with all of these movements is almost certainly a leftist.[36]

230.
The more dangerous leftists, that is, those who are most power-hungry, are often characterized by arrogance or by a dogmatic approach to ideology. However, the most dangerous leftists of all may be certain oversocialized types who avoid irritating displays of aggressiveness and refrain from advertising their leftism, but work quietly and unobtrusively to promote collectivist values, “enlightened” psychological techniques for socializing children, dependence of the individual on the system, and so forth. These crypto-leftists (as we may call them) approximate certain bourgeois types as far as practical action is concerned, but differ from them in psychology, ideology and motivation. The ordinary bourgeois tries to bring people under control of the system in order to protect his way of life, or he does so simply because his attitudes are conventional. The crypto-leftist tries to bring people under control of the system because he is a True Believer in a collectivist ideology. The crypto-leftist is differentiated from the average leftist of the oversocialized type by the fact that his rebellious impulse is weaker and he is more securely socialized. He is differentiated from the ordinary well-socialized bourgeois by the fact that there is some deep lack within him that makes it necessary for him to devote himself to a cause and immerse himself in a collectivity. And maybe his (well-sublimated) drive for power is stronger than that of the average bourgeois.

Final note

231.
Throughout this article we’ve made imprecise statements and statements that ought to have had all sorts of qualifications and reservations attached to them; and some of our statements may be flatly false. Lack of sufficient information and the need for brevity made it impossible for us to formulate our assertions more precisely or add all the necessary qualifications. And of course in a discussion of this kind one must rely heavily on intuitive judgment, and that can sometimes be wrong. So we don’t claim that this article expresses more than a crude approximation to the truth.

232.
All the same we are reasonably confident that the general outlines of the picture we have painted here are roughly correct. We have portrayed leftism in its modern form as a phenomenon peculiar to our time and as a symptom of the disruption of the power process. But we might possibly be wrong about this. Oversocialized types who try to satisfy their drive for power by imposing their morality on everyone have certainly been around for a long time. But we think that the decisive role played by feelings of inferiority, low self-esteem, powerlessness, identification with victims by people who are not themselves victims, is a peculiarity of modern leftism. Identification with victims by people not themselves victims can be seen to some extent in 19th century leftism and early Christianity but as far as we can make out, symptoms of low self-esteem, etc., were not nearly so evident in these movements, or in any other movements, as they are in modern leftism. But we are not in a position to assert confidently that no such movements have existed prior to modern leftism. This is a significant question to which historians ought to give their attention.

Notes

1. We are not asserting that all, or even most, bullies and ruthless competitors suffer from feelings of inferiority.

2. During the Victorian period many oversocialized people suffered from serious psychological problems as a result of repressing or trying to repress their sexual feelings. Freud apparently based his theories on people of this type. Today the focus of socialization has shifted from sex to aggression.

3. Not necessarily including specialists in engineering “hard” sciences.

4. There are many individuals of the middle and upper classes who resist some of these values, but usually their resistance is more or less covert. Such resistance appears in the mass media only to a very limited extent. The main thrust of propaganda in our society is in favor of the stated values.

The main reasons why these values have become, so to speak, the official values of our society is that they are useful to the industrial system. Violence is discouraged because it disrupts the functioning of the system. Racism is discouraged because ethnic conflicts also disrupt the system, and discrimination wastes the talent of minority-group members who could be useful to the system. Poverty must be “cured” because the underclass causes problems for the system and contact with the underclass lowers the morale of the other classes. Women are encouraged to have careers because their talents are useful to the system and, more importantly, because by having regular jobs women become better integrated into the system and tied directly to it rather than to their families. This helps to weaken family solidarity. (The leaders of the system say they want to strengthen the family, but they really mean is that they want the family to serve as an effective tool for socializing children in accord with the needs of the system. We argue in paragraphs 51,52 that the system cannot afford to let the family or other small-scale social groups be strong or autonomous.)

5. It may be argued that the majority of people don’t want to make their own decisions but want leaders to do their thinking for them. There is an element of truth in this. People like to make their own decisions in small matters, but making decisions on difficult, fundamental questions requires facing up to psychological conflict, and most people hate psychological conflict. Hence they tend to lean on others in making difficult decisions. The majority of people are natural followers, not leaders, but they like to have direct personal access to their leaders and participate to some extent in making difficult decisions. At least to that degree they need autonomy.

6. Some of the symptoms listed are similar to those shown by caged animals. To explain how these symptoms arise from deprivation with respect to the power process: Common-sense understanding of human nature tells one that lack of goals whose attainment requires effort leads to boredom and that boredom, long continued, often leads eventually to depression. Failure to obtain goals leads to frustration and lowering of self-esteem. Frustration leads to anger, anger to aggression, often in the form of spouse or child abuse. It has been shown that long-continued frustration commonly leads to depression and that depression tends to cause guilt, sleep disorders, eating disorders and bad feelings about oneself. Those who are tending toward depression seek pleasure as an antidote; hence insatiable hedonism and excessive sex, with perversions as a means of getting new kicks. Boredom too tends to cause excessive pleasure-seeking since, lacking other goals, people often use pleasure as a goal. See accompanying diagram. The foregoing is a simplification. Reality is more complex, and of course deprivation with respect to the power process is not the only cause of the symptoms described. By the way, when we mention depression we do not necessarily mean depression that is severe enough to be treated by a psychiatrist. Often only mild forms of depression are involved. And when we speak of goals we do not necessarily mean long-term, thought out goals. For many or most people through much of human history, the goals of a hand-to-mouth existence (merely providing oneself and one’s family with food from day to day) have been quite sufficient.

7. A partial exception may be made for a few passive, inward looking groups, such as the Amish, which have little effect on the wider society. Apart from these, some genuine small-scale communities do exist in America today. For instance, youth gangs and “cults.” Everyone regards them as dangerous, and so they are, because the members of these groups are loyal primarily to one another rather than to the system, hence the system cannot control them. Or take the gypsies. The gypsies commonly get away with theft and fraud because their loyalties are such that they can always get other gypsies to give testimony that “proves” their innocence. Obviously the system would be in serious trouble if too many people belonged to such groups. Some of the early-20th century Chinese thinkers who were concerned with modernizing China recognized the necessity of breaking down small-scale social groups such as the family: “(According to Sun Yat-sen) The Chinese people needed a new surge of patriotism, which would lead to a transfer of loyalty from the family to the state. . .(According to Li Huang) traditional attachments, particularly to the family had to be abandoned if nationalism were to develop to China.” (Chester C. Tan, Chinese Political Thought in the Twentieth Century,” page 125, page 297.)

8. Yes, we know that 19th century America had its problems, and serious ones, but for the sake of brevity we have to express ourselves in simplified terms.

9. We leave aside the underclass. We are speaking of the mainstream.

10. Some social scientists, educators, “mental health” professionals and the like are doing their best to push the social drives into group 1 by trying to see to it that everyone has a satisfactory social life.

11. Is the drive for endless material acquisition really an artificial creation of the advertising and marketing industry? Certainly there is no innate human drive for material acquisition. There have been many cultures in which people have desired little material wealth beyond what was necessary to satisfy their basic physical needs (Australian aborigines, traditional Mexican peasant culture, some African cultures). On the other hand there have also been many pre-industrial cultures in which material acquisition has played an important role. So we can’t claim that today’s acquisition-oriented culture is exclusively a creation of the advertising and marketing industry. But it is clear that the advertising and marketing industry has had an important part in creating that culture. The big corporations that spend millions on advertising wouldn’t be spending that kind of money without solid proof that they were getting it back in increased sales. One member of FC met a sales manager a couple of years ago who was frank enough to tell him, “Our job is to make people buy things they don’t want and don’t need.” He then described how an untrained novice could present people with the facts about a product, and make no sales at all, while a trained and experienced professional salesman would make lots of sales to the same people. This shows that people are manipulated into buying things they don’t really want.

12. The problem of purposelessness seems to have become less serious during the last 15 years or so, because people now feel less secure physically and economically than they did earlier, and the need for security provides them with a goal. But purposelessness has been replaced by frustration over the difficulty of attaining security. We emphasize the problem of purposelessness because the liberals and leftists would wish to solve our social problems by having society guarantee everyone’s security; but if that could be done it would only bring back the problem of purposelessness. The real issue is not whether society provides well or poorly for people’s security; the trouble is that people are dependent on the system for their security rather than having it in their own hands. This, by the way, is part of the reason why some people get worked up about the right to bear arms; possession of a gun puts that aspect of their security in their own hands.

13. Conservatives’ efforts to decrease the amount of government regulation are of little benefit to the average man. For one thing, only a fraction of the regulations can be eliminated because most regulations are necessary. For another thing, most of the deregulation affects business rather than the average individual, so that its main effect is to take power from the government and give it to private corporations. What this means for the average man is that government interference in his life is replaced by interference from big corporations, which may be permitted, for example, to dump more chemicals that get into his water supply and give him cancer. The conservatives are just taking the average man for a sucker, exploiting his resentment of Big Government to promote the power of Big Business.

14. When someone approves of the purpose for which propaganda is being used in a given case, he generally calls it “education” or applies to it some similar euphemism. But propaganda is propaganda regardless of the purpose for which it is used.

15. We are not expressing approval or disapproval of the Panama invasion. We only use it to illustrate a point.

16. When the American colonies were under British rule there were fewer and less effective legal guarantees of freedom than there were after the American Constitution went into effect, yet there was more personal freedom in pre-industrial America, both before and after the War of Independence, than there was after the Industrial Revolution took hold in this country. We quote from Violence in America: Historical and Comparative Perspectives, edited by Hugh Davis Graham and Ted Robert Gurr, Chapter 12 by Roger Lane, pages 476-478:

“The progressive heightening of standards of property, and with it the increasing reliance on official law enforcement (in 19th century America). . .were common to the whole society. . .[T]he change in social behavior is so long term and so widespread as to suggest a connection with the most fundamental of contemporary social processes; that of industrial urbanization itself. . .

“Massachusetts in 1835 had a population of some 660,940, 81 percent rural, overwhelmingly preindustrial and native born. Its citizens were used to considerable personal freedom. Whether teamsters, farmers or artisans, they were all accustomed to setting their own schedules, and the nature of their work made them physically dependent on each other. . .Individual problems, sins or even crimes, were not generally cause for wider social concern. . .

“But the impact of the twin movements to the city and to the factory, both just gathering force in 1835, had a progressive effect on personal behavior throughout the 19th century and into the 20th. The factory demanded regularity of behavior, a life governed by obedience to the rhythms of clock and calendar, the demands of foreman and supervisor. In the city or town, the needs of living in closely packed neighborhoods inhibited many actions previously unobjectionable. Both blue- and white-collar employees in larger establishments were mutually dependent on their fellows. As one man’s work fit into another’s, so one man’s business was no longer his own.

“The results of the new organization of life and work were apparent by 1900, when some 76 percent of the 2,805,346 inhabitants of Massachusetts were classified as urbanites. Much violent or irregular behavior which had been tolerable in a casual, independent society was no longer acceptable in the more formalized, cooperative atmosphere of the later period. . .The move to the cities had, in short, produced a more tractable, more socialized, more ‘civilized’ generation than its predecessors.”

—Roger Lane, Violence in America

[If copyright problems make it impossible for this long quotation to be printed, then please change Note 16 to read as follows:

16. When the American colonies were under British rule there were fewer and less effective legal guarantees of freedom than there were after the American Constitution went into effect, yet there was more personal freedom in pre-industrial America, both before and after the War of Independence, than there was after the Industrial Revolution took hold in this country. In “Violence in America: Historical and Comparative Perspectives,” edited by Hugh Davis Graham and Ted Robert Gurr, Chapter 12 by Roger Lane, it is explained how in pre-industrial America the average person had greater independence and autonomy than he does today, and how the process of industrialization necessarily led to the restriction of personal freedom.]

17. Apologists for the system are fond of citing cases in which elections have been decided by one or two votes, but such cases are rare.

18.

“Today, in technologically advanced lands, men live very similar lives in spite of geographical, religious and political differences. The daily lives of a Christian bank clerk in Chicago, a Buddhist bank clerk in Tokyo, a Communist bank clerk in Moscow are far more alike than the life any one of them is like that of any single man who lived a thousand years ago. These similarities are the result of a common technology. . .”

—L. Sprague de Camp, The Ancient Engineers, Ballentine edition, page 17.

The lives of the three bank clerks are not identical. Ideology does have some effect. But all technological societies, in order to survive, must evolve along approximately the same trajectory.

19. Just think—an irresponsible genetic engineer might create a lot of terrorists.

20. For a further example of undesirable consequences of medical progress, suppose a reliable cure for cancer is discovered. Even if the treatment is too expensive to be available to any but the elite, it will greatly reduce their incentive to stop the escape of carcinogens into the environment.

21. Since many people may find paradoxical the notion that a large number of good things can add up to a bad thing, we will illustrate with an analogy. Suppose Mr. A is playing chess with Mr. B. Mr. C, a Grand Master, is looking over Mr. A’s shoulder. Mr. A of course wants to win his game, so if Mr. C points out a good move for him to make, he is doing Mr. A a favor. But suppose now that Mr. C tells Mr. A how to make all of his moves. In each particular instance he does Mr. A a favor by showing him his best move, but by making all of his moves for him he spoils the game, since there is no point in Mr. A’s playing the game at all if someone else makes all his moves.

The situation of modern man is analogous to that of Mr. A. The system makes an individual’s life easier for him in innumerable ways, but in doing so it deprives him of control over his own fate.

22. Here we are considering only the conflict of values within the mainstream. For the sake of simplicity we leave out of the picture “outsider” values like the idea that wild nature is more important than human economic welfare.

23. Self-interest is not necessarily material self-interest. It can consist in fulfillment of some psychological need, for example, by promoting one’s own ideology or religion.

24. A qualification: It is in the interest of the system to permit a certain prescribed degree of freedom in some areas. For example, economic freedom (with suitable limitations and restraints) has proved effective in promoting economic growth. But only planned, circumscribed, limited freedom is in the interest of the system. The individual must always be kept on a leash, even if the leash is sometimes long (see paragraphs 94, 97).

25. We don’t mean to suggest that the efficiency or the potential for survival of a society has always been inversely proportional to the amount of pressure or discomfort to which the society subjects people. That is certainly not the case. There is good reason to believe that many primitive societies subjected people to less pressure than the European society did, but European society proved far more efficient than any primitive society and always won out in conflicts with such societies because of the advantages conferred by technology.

26. If you think that more effective law enforcement is unequivocally good because it suppresses crime, then remember that crime as defined by the system is not necessarily what you would call crime. Today, smoking marijuana is a “crime,” and in some places in the U.S., possession of any firearm, registered or not, may be made a crime; the same thing may happen with disapproved methods of child-rearing, such as spanking. In some countries, expression of dissident political opinions is a crime, and there is no certainty that this will never happen in the U.S., since no constitution or political system lasts forever. If a society needs a large, powerful law enforcement establishment, then there is something gravely wrong with that society; it must be subjecting people to severe pressures if so many refuse to follow the rules, or follow them only because forced. Many societies in the past have gotten by with little or no formal law-enforcement.

27. To be sure, past societies have had means of influencing behavior, but these have been primitive and of low effectiveness compared with the technological means that are now being developed.

28. However, some psychologists have publicly expressed opinions indicating their contempt for human freedom. And the mathematician Claude Shannon was quoted in Omni (August 1987) as saying, “I visualize a time when we will be to robots what dogs are to humans, and I’m rooting for the machines.”

29. This is no science fiction! After writing paragraph 154 we came across an article in Scientific American according to which scientists are actively developing techniques for identifying possible future criminals and for treating them by a combination of biological and psychological means. Some scientists advocate compulsory application of the treatment, which may be available in the near future. (See “Seeking the Criminal Element”, by W. Wayt Gibbs, Scientific American, March 1995.) Maybe you think this is OK because the treatment would be applied to those who might become drunk drivers (they endanger human life too), then perhaps to people who spank their children, then to environmentalists who sabotage logging equipment, eventually to anyone whose behavior is inconvenient for the system.

30. A further advantage of nature as a counter-ideal to technology is that, in many people, nature inspires the kind of reverence that is associated with religion, so that nature could perhaps be idealized on a religious basis. It is true that in many societies religion has served as a support and justification for the established order, but it is also true that religion has often provided a basis for rebellion. Thus it may be useful to introduce a religious element into the rebellion against technology, the more so because Western society today has no strong religious foundation.

Religion nowadays either is used as cheap and transparent support for narrow, short-sighted selfishness (some conservatives use it this way), or even is cynically exploited to make easy money (by many evangelists), or has degenerated into crude irrationalism (fundamentalist Protestant sects, “cults”), or is simply stagnant (Catholicism, main-line Protestantism). The nearest thing to a strong, widespread, dynamic religion that the West has seen in recent times has been the quasi-religion of leftism, but leftism today is fragmented and has no clear, unified inspiring goal.

Thus there is a religious vacuum in our society that could perhaps be filled by a religion focused on nature in opposition to technology. But it would be a mistake to try to concoct artificially a religion to fill this role. Such an invented religion would probably be a failure. Take the “Gaia” religion for example. Do its adherents really believe in it or are they just play-acting? If they are just play-acting their religion will be a flop in the end.

It is probably best not to try to introduce religion into the conflict of nature vs. technology unless you really believe in that religion yourself and find that it arouses a deep, strong, genuine response in many other people.

31. Assuming that such a final push occurs. Conceivably the industrial system might be eliminated in a somewhat gradual or piecemeal fashion (see paragraphs 4, 167 and Note 4).

32. It is even conceivable (remotely) that the revolution might consist only of a massive change of attitudes toward technology resulting in a relatively gradual and painless disintegration of the industrial system. But if this happens we’ll be very lucky. It’s far more probably that the transition to a nontechnological society will be very difficult and full of conflicts and disasters.

33. The economic and technological structure of a society are far more important than its political structure in determining the way the average man lives (see paragraphs 95, 119 and Notes 16, 18).

34. This statement refers to our particular brand of anarchism. A wide variety of social attitudes have been called “anarchist,” and it may be that many who consider themselves anarchists would not accept our statement of paragraph 215. It should be noted, by the way, that there is a nonviolent anarchist movement whose members probably would not accept FC as anarchist and certainly would not approve of FC’s violent methods.

35. Many leftists are motivated also by hostility, but the hostility probably results in part from a frustrated need for power.

36. It is important to understand that we mean someone who sympathizes with these movements as they exist today in our society. One who believes that women, homosexuals, etc., should have equal rights is not necessarily a leftist. The feminist, gay rights, etc., movements that exist in our society have the particular ideological tone that characterizes leftism, and if one believes, for example, that women should have equal rights it does not necessarily follow that one must sympathize with the feminist movement as it exists today.