Tags: calc

34

sparkline

Sunday, March 10th, 2024

Bookmarklets for testing your website

I’m at day two of Indie Web Camp Brighton.

Day one was excellent. It was really hard to choose which sessions to go to because they all sounded interesting. That’s a good problem to have.

I ended up participating in:

  • a session on POSSE,
  • a session on NFC tags,
  • a session on writing, and
  • a session on testing your website that was hosted by Ros

In that testing session I shared some of the bookmarklets I use regularly.

Bookmarklets? They’re bookmarks that sit in the toolbar of your desktop browser. Just like any other bookmark, they’re links. The difference is that these links begin with javascript: rather than http. That means you can put programmatic instructions inside the link. Click the bookmark and the JavaScript gets executed.

In my mind, there are two different approaches to making a bookmarklet. One kind of bookmarklet contains lots of clever JavaScript—that’s where the smart stuff happens. The other kind of bookmarklet is deliberately dumb. All they do is take the URL of the current page and pass it to another service—that’s where the smart stuff happens.

I like that second kind of bookmarklet.

Here are some bookmarklets I’ve made. You can drag any of them up to the toolbar of your browser. Or you could create a folder called, say, “bookmarklets”, and drag these links up there.

Validation: This bookmarklet will validate the HTML of whatever page you’re on.

Validate HTML

Carbon: This bookmarklet will run the domain through the website carbon calculator.

Calculate carbon

Accessibility: This bookmarklet will run the current page through the Website Accessibility Evaluation Tools.

WAVE

Performance: This bookmarklet will take the current page and it run it through PageSpeed Insights, which includes a Lighthouse test.

PageSpeed

HTTPS: This bookmarklet will run your site through the SSL checker from SSL Labs.

SSL Report

Headers: This bookmarklet will test the security headers on your website.

Security Headers

Drag any of those links to your browser’s toolbar to “install” them. If you don’t like one, you can delete it the same way you can delete any other bookmark.

Monday, March 4th, 2024

Playing with Infinity in CSS / Coder’s Block

CSS has an infinity constant.

I did not know this.

Retrofitting fluid typography | Clagnut by Richard Rutter

Here’s a taste of what Rich will be delivering at Patterns Day on Thursday—can’t wait!

Wednesday, October 4th, 2023

Clamp calculator | Utopia

Oh, this is a nice addition to the Utopia set of tools: when you don’t need a full-on type scale but you still want to figure out fluid clamp() values, the clamp calculator has you covered.

It’s got permalinks too!

Monday, May 22nd, 2023

Sunday, January 22nd, 2023

clamp() Calculator · Chris Burnell

Like a little mini Utopia:

Handy little tool for calculating viewport-based clamped values.

Monday, January 16th, 2023

Line heights in CSS work better with ratios | Andy Bell

There’s a broader point here about declarative design:

Setting very specific values may feel like you’re in more control, but you’re actually rescinding control by introducing fragility in the form of overly-specific CSS.

Wednesday, July 27th, 2022

Pizza Exchange Rate | FlowingData

This is a story about pizza and geometry.

The interactive widget here really demonstrates the difference between showing and telling.

Wednesday, July 13th, 2022

How normal am I?

A fascinating interactive journey through biometrics using your face.

Wednesday, March 17th, 2021

Fluid Space Calculator | Utopia

Type and space are linked, so if you’re going to have a fluid type calculator, it makes sense to have a fluid space calculator too. More great work from Trys and James!

Monday, December 14th, 2020

EStimator.dev: the modern JavaScript savings calculator

Find out how much smaller your JavaScript could be.

Monday, June 1st, 2020

Sass Color Functions in CSS | Jim Nielsen’s Weblog

I’m not the only one swapping out Sass with CSS for colour functions:

Because of the declarative nature of CSS, you’re never going to get something as terse as what you could get in Sass. So sure, you’re typing more characters. But you know what you’re not doing? Wrangling build plugins and updating dependencies to get Sass to build. What you write gets shipped directly to the browser and works as-is, now and for eternity. It’s hard to say that about your Sass code.

Saturday, May 30th, 2020

Programming CSS to perform Sass colour functions

I wrote recently about moving away from Sass to using native CSS features. I had this to say on the topic of mixins in Sass:

These can be very useful, but now there’s a lot that you can do just in CSS with calc(). The built-in darken() and lighten() mixins are handy though when it comes to colours.

I know we will be getting these in the future but we’re not there yet with CSS.

Anyway, I had all this in the back of my mind when I was reading Lea’s excellent feature in this month’s Increment: A user’s guide to CSS variables. She’s written about a really clever technique of combining custom properites with hsl() colour values for creating colour palettes. (See also: Una’s post on dynamic colour theming with pure CSS.)

As so often happens when I’m reading something written by Lea—or seeing her give a talk—light bulbs started popping over my head (my usual response to Lea’s knowledge bombs is either “I didn’t know you could do that!” or “I never thought of doing that!”).

I immediately set about implementing this technique over on The Session. The trick here is to use separate custom properties for the hue, saturation, and lightness parts of hsl() colour values. Then, when you want to lighten or darken the colour—say, on hover—you can update the lightness part.

I’ve made a Codepen to show what I’m doing.

Let’s say I’m styling a button element. I make custom propertes for hsl() values:

button {
  --button-colour-hue: 19;
  --button-colour-saturation: 82%;
  --button-colour-lightness: 38%;
  background-color: hsl(
    var(--button-colour-hue),
    var(--button-colour-saturation),
    var(--button-colour-lightness)
  );
}

For my buttons, I want the borders to be slightly darker than the background colour. When I was using Sass, I used the darken() function to this. Now I use calc(). Here’s how I make the borders 10% darker:

border-color: hsl(
  var(--button-colour-hue),
  var(--button-colour-saturation),
  calc(var(--button-colour-lightness) - 10%)
);

That calc() function is substracting a percentage from a percentage: 38% minus 10% in this case. The borders will have a lightness of 28%.

I make the bottom border even darker and the top border lighter to give a feeling of depth.

On The Session there’s a “cancel” button style that’s deep red.

Here’s how I set its colour:

.cancel {
  --button-colour-hue: 0;
  --button-colour-saturation: 100%;
  --button-colour-lightness: 40%;
}

That’s it. The existing button declarations take care of assigning the right shades for the border colours.

Here’s another example. Site admins see buttons for some actions only available to them. I want those buttons to have their own colour:

.admin {
  --button-colour-hue: 45;
  --button-colour-saturation: 100%;
  --button-colour-lightness: 40%;
}

You get the idea. It doesn’t matter how many differently-coloured buttons I create, the effect of darkening or lightening their borders is all taken care of.

So it turns out that the lighten() and darken() functions from Sass are available to us in CSS by using a combination of custom properties, hsl(), and calc().

I’m also using this combination to lighten or darken background and border colours on :hover. You can poke around the Codepen if you want to see that in action.

I love seeing the combinatorial power of these different bits of CSS coming together. It really is a remarkably powerful programming language.

Thursday, February 20th, 2020

“Let us Calculate!”: Leibniz, Llull, and the Computational Imagination – The Public Domain Review

The characteristica universalis and the calculus racionator of Leibniz.

Tuesday, February 18th, 2020

Utopia

Trys and James recently unveiled their Utopia project. They’ve been tinkering away at it behind the scenes for quite a while now.

You can check out the website and read the blog to get the details of how it accomplishes its goal:

Elegantly scale type and space without breakpoints.

I may well be biased, but I really like this project. I’ve been asking myself why I find it so appealing. Here are a few of the attributes of Utopia that strike a chord with me…

It’s collaborative

Collaboration is at the heart of Clearleft’s work. I know everyone says that, but we’ve definitely seen a direct correlation: projects with high levels of collaboration are invariably more successful than projects where people are siloed.

The genesis for Utopia came about after Trys and James worked together on a few different projects. It’s all too easy to let design and development splinter off into their own caves, but on these projects, Trys and James were working (literally) side by side. This meant that they could easily articulate frustrations to one another, and more important, they could easily share their excitement.

The end result of their collaboration is some very clever code. There’s an irony here. This code could be used to discourage collaboration! After all, why would designers and developers sit down together if they can just pass these numbers back and forth?

But I don’t think that Utopia will appeal to designers and developers who work in that way. Born in the spirit of collaboration, I suspect that it will mostly benefit people who value collaboration.

It’s intrinsic

If you’re a control freak, you may not like Utopia. The idea is that you specify the boundaries of what you’re trying to accomplish—minimum/maximum font sizes, minumum/maximum screen sizes, and some modular scales. Then you let the code—and the browser—do all the work.

On the one hand, this feels like surrending control. But on the other hand, because the underlying system is so robust, it’s a way of guaranteeing quality, even in situations you haven’t accounted for.

If someone asks you, “What size will the body copy be when the viewport is 850 pixels wide?”, your answer would have to be “I don’t know …but I do know that it will be appropriate.”

This feels like a very declarative way of designing. It reminds me of the ethos behind Andy and Heydon’s site, Every Layout. They call it algorithmic layout design:

Employing algorithmic layout design means doing away with @media breakpoints, “magic numbers”, and other hacks, to create context-independent layout components. Your future design systems will be more consistent, terser in code, and more malleable in the hands of your users and their devices.

See how breakpoints are mentioned as being a very top-down approach to layout? Remember the tagline for Utopia, which aims for fluid responsive design?

Elegantly scale type and space without breakpoints.

Unsurprisingly, Andy really likes Utopia:

As the co-author of Every Layout, my head nearly fell off from all of the nodding when reading this because this is the exact sort of approach that we preach: setting some rules and letting the browser do the rest.

Heydon describes this mindset as automating intent. I really like that. I think that’s what Utopia does too.

As Heydon said at Patterns Day:

Be your browser’s mentor, not its micromanager.

The idea is that you give it rules, you give it axioms or principles to work on, and you let it do the calculation. You work with the in-built algorithms of the browser and of CSS itself.

This is all possible thanks to improvements to CSS like calc, flexbox and grid. Jen calls this approach intrinsic web design. Last year, I liveblogged her excellent talk at An Event Apart called Designing Intrinsic Layouts.

Utopia feels like it has the same mindset as algorithmic layout design and intrinsic web design. Trys and James are building on the great work already out there, which brings me to the final property of Utopia that appeals to me…

It’s iterative

There isn’t actually much that’s new in Utopia. It’s a combination of existing techniques. I like that. As I said recently:

I’m a great believer in the HTML design principle, Evolution Not Revolution:

It is better to evolve an existing design rather than throwing it away.

First of all, Utopia uses the idea of modular scales in typography. Tim Brown has been championing this idea for years.

Then there’s the idea of typography being fluid and responsive—just like Jason Pamental has been speaking and writing about.

On the code side, Utopia wouldn’t be possible without the work of Mike Reithmuller and his breakthroughs on responsive and fluid typography, which led to Tim’s work on CSS locks.

Utopia takes these building blocks and combines them. So if you’re wondering if it would be a good tool for one of your projects, you can take an equally iterative approach by asking some questions…

Are you using fluid type?

Do your font-sizes increase in proportion to the width of the viewport? I don’t mean in sudden jumps with @media breakpoints—I mean some kind of relationship between font size and the vw (viewport width) unit. If so, you’re probably using some kind of mechanism to cap the minimum and maximum font sizes—CSS locks.

I’m using that technique on Resilient Web Design. But I’m not changing the relative difference between different sized elements—body copy, headings, etc.—as the screen size changes.

Are you using modular scales?

Does your type system have some kind of ratio that describes the increase in type sizes? You probably have more than one ratio (unlike Resilient Web Design). The ratio for small screens should probably be smaller than the ratio for big screens. But rather than jump from one ratio to another at an arbitrary breakpoint, Utopia allows the ratio to be fluid.

So it’s not just that font sizes are increasing as the screen gets larger; the comparative difference is also subtly changing. That means there’s never a sudden jump in font size at any time.

Are you using custom properties?

A technical detail this, but the magic of Utopia relies on two powerful CSS features: calc() and custom properties. These two workhorses are used by Utopia to generate some CSS that you can stick at the start of your stylesheet. If you ever need to make changes, all the parameters are defined at the top of the code block. Tweak those numbers and watch everything cascade.

You’ll see that there’s one—and only one—media query in there. This is quite clever. Usually with CSS locks, you’d need to have a media query for every different font size in order to cap its growth at the maximum screen size. With Utopia, the maximum screen size—100vw—is abstracted into a variable (a custom property). The media query then changes its value to be the upper end of your CSS lock. So it doesn’t matter how many different font sizes you’re setting: because they all use that custom property, one single media query takes care of capping the growth of every font size declaration.

If you’re already using CSS locks, modular scales, and custom properties, Utopia is almost certainly going to be a good fit for you.

If you’re not yet using those techniques, but you’d like to, I highly recommend using Utopia on your next project.

Tuesday, February 11th, 2020

Fluid scale and tokens: a match made in heaven - Andy Bell

Andy takes Utopia for a spin—it very much matches his approach.

Utopia

This is the project that Trys and James have been working on at Clearleft. It’s a way of approaching modular scales in web typography that uses CSS locks and custom properties to fantastic effect.

Utopia is not a product, a plugin, or a framework. It’s a memorable/pretentious word we use to refer to a way of thinking about fluid responsive design.

Wednesday, November 27th, 2019

Case Study: lynnandtonic.com 2019 refresh - lynnandtonic.com

Lynn gives a step-by-step walkthrough of the latest amazing redesign of her website. There’s so much joy and craft in here, with real attention to detail—I love it!

Tuesday, September 10th, 2019

Website Carbon Calculator – Calculate your websites carbon emissions

Get an idea of how much your website is contributing to the climate crisis.

In total, the internet produces 2% of global carbon emissions, roughly the same as that bad boy of climate change, the aviation industry.

Monday, May 20th, 2019

Web Bloat Score Calculator

Page web bloat score (WebBS for short) is calculated as follows:

WebBS = TotalPageSize / PageImageSize

Yes, this is a tongue-in-cheek somewhat arbitrary measurement, but it’s well worth reading through the rationale for it.

How can the image of a page be smaller than the page itself?