Groove is the fifth studio album from PhilippinePop and R&B singer Billy Crawford. The album was released on iTunes on May 1st, 2009. It was also made available in physical form in 2009. The new album is a re-working of classic hits from the 1970s to the 1980s.
Track listing
Steal Away (originally popularized by Robbie Dupree)
Groove is a 2000 American film that portrays one night in the San Francisco underground rave scene. Through a single email, the word spreads that a huge rave is going to take place in an abandoned warehouse. John Digweed has a cameo as himself and also contributed to the soundtrack with Nick Muir, under their production alias Bedrock.
Plot
Groove tells the story of an all-night rave. The film is broken up into segments by which DJ is spinning and features real-life DJs DJ Forest Green, WishFM, Polywog, and Digweed. It follows David Turner (Hamish Linklater), who becomes a reluctant raver when his brother Colin (Denny Kirkwood) drags him to the rave.
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include:
A canal cut in a hard material, usually metal. This canal can be round, oval or an arc in order to receive another component such as a boss, a tongue or a gasket. It can also be on the circumference of a dowel, a bolt, an axle or on the outside or inside of a tube or pipe etc. This canal may receive a circlip an o-ring or a gasket.
Designed by Alfred M. Hedley from wood and stamped metal, Quincy opened on October 3, 1897, it retained much of its original surroundings over the years and was restored in 1985–1988, so that it is considered one of "150 great places in Illinois" by the American Institute of Architects. The station is situated in the South Loop Financial District and is the closest CTA rail station to the Willis Tower, approximately one block west. It is also close to Union Station, the terminal for several Metra and Amtrak routes and about three blocks west of Quincy, although the Clinton station on the Blue Line is closer.
Quincy (/ˈkwɪnsi/KWIN-see), known as Illinois's "Gem City," is a city on the Mississippi River and the county seat of Adams County, Illinois, United States. As of the 2010 census the city held a population of 40,633, up from 40,366 in 2000. During the 19th Century, Quincy was a thriving transportation center as riverboats and rail service linked the city to many destinations west and along the river. It was once Illinois' second-largest city, surpassing Peoria in 1870. The city holds several historic districts, including the Downtown Quincy Historic District and the South Side German Historic District showcasing the architecture of Quincy's many German immigrants from the late-19th century.
Today, Quincy remains a prominent river city. It has been twice recognized as an All-America City and is a participant in the Tree City USA program. In the fall of 2010, Forbes Magazine listed Quincy as the eighth "Best Small City To Raise A Family."
History
Early history
Quincy's location along the Mississippi River has attracted settlers for centuries. The first known inhabitants to the region were of the Illiniwektribe. Years later, following numerous incursions, the Sauk, Fox and Kickapoo also called the site home.
Provided to YouTube by Virgin Music Group
Let's Groove · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Wayne Vaughn
Composer, Writer: Maurice White
Auto-generated by YouTube.
published: 21 Dec 2022
Steal Away
Provided to YouTube by Virgin Music Group
Steal Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Rick Chudacoff
Composer, Writer: Robbie Dupuis
Auto-generated by YouTube.
published: 21 Dec 2022
Human Nature
Provided to YouTube by Virgin Music Group
Human Nature · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Steve Parcaro
Composer, Writer: John Bettis
Auto-generated by YouTube.
published: 21 Dec 2022
You've Got a Friend
Provided to YouTube by Virgin Music Group
You've Got a Friend · Billy Crawford · Nikki Gil
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Carole King
Auto-generated by YouTube.
published: 21 Dec 2022
How Sweet It Is
Provided to YouTube by Virgin Music Group
How Sweet It Is · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Eddie Holland
Composer, Writer: Lamont Dozier
Composer, Writer: Brian Holland
Auto-generated by YouTube.
published: 21 Dec 2022
Billy Crawford - Human Nature (Official Music Video)
Brand new single 'Human Nature' from our international R&B Pop sensation Billy Crawford, taken from his latest album, Groove.
Don’t forget to subscribe: http://bit.ly/1ocCqit
Available on iTunes: https://itunes.apple.com/ph/album/human-nature/id845159938?i=845159981
Welcome to Universal Records’ page! We are the number one independent record label in the Philippines. Home of the best Original Pilipino Music (OPM) artists, our roster includes Gary Valenciano, Regine Velasquez, Ogie Alcasid, Noel Cabangon, Christian Bautista, Gloc-9, Sam Concepcion, Parokya ni Edgar, Sponge Cola, Kamikazee, Calalily, and more.
Subscribe to our channel for exclusive videos including official music videos, lyric videos, album previews and album launch invitations!
Like us on Facebook: https://www.facebook.c...
published: 02 Aug 2009
Billy Crawford Groove CD unboxing and CD Collection
Yup unboxing billy crawford groove cd
published: 28 May 2009
Billy Crawford Greatest Hits ~ OPM Music ~ Top 10 Hits of All Time
Provided to YouTube by Virgin Music Group
Never Let Her Slip Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Andrew Gold
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Let's Groove · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Wayne Vaughn...
Provided to YouTube by Virgin Music Group
Let's Groove · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Wayne Vaughn
Composer, Writer: Maurice White
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Let's Groove · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Wayne Vaughn
Composer, Writer: Maurice White
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Steal Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Rick Chudacoff...
Provided to YouTube by Virgin Music Group
Steal Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Rick Chudacoff
Composer, Writer: Robbie Dupuis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Steal Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Rick Chudacoff
Composer, Writer: Robbie Dupuis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Human Nature · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Steve Parcar...
Provided to YouTube by Virgin Music Group
Human Nature · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Steve Parcaro
Composer, Writer: John Bettis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Human Nature · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Steve Parcaro
Composer, Writer: John Bettis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
You've Got a Friend · Billy Crawford · Nikki Gil
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, W...
Provided to YouTube by Virgin Music Group
You've Got a Friend · Billy Crawford · Nikki Gil
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Carole King
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
You've Got a Friend · Billy Crawford · Nikki Gil
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Carole King
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
How Sweet It Is · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Eddie Hol...
Provided to YouTube by Virgin Music Group
How Sweet It Is · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Eddie Holland
Composer, Writer: Lamont Dozier
Composer, Writer: Brian Holland
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
How Sweet It Is · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Eddie Holland
Composer, Writer: Lamont Dozier
Composer, Writer: Brian Holland
Auto-generated by YouTube.
Brand new single 'Human Nature' from our international R&B Pop sensation Billy Crawford, taken from his latest album, Groove.
Don’t forget to subscribe: http://...
Brand new single 'Human Nature' from our international R&B Pop sensation Billy Crawford, taken from his latest album, Groove.
Don’t forget to subscribe: http://bit.ly/1ocCqit
Available on iTunes: https://itunes.apple.com/ph/album/human-nature/id845159938?i=845159981
Welcome to Universal Records’ page! We are the number one independent record label in the Philippines. Home of the best Original Pilipino Music (OPM) artists, our roster includes Gary Valenciano, Regine Velasquez, Ogie Alcasid, Noel Cabangon, Christian Bautista, Gloc-9, Sam Concepcion, Parokya ni Edgar, Sponge Cola, Kamikazee, Calalily, and more.
Subscribe to our channel for exclusive videos including official music videos, lyric videos, album previews and album launch invitations!
Like us on Facebook: https://www.facebook.com/universalrecordsphfanpage
Follow us on Twitter :
https://twitter.com/universalrecph
Brand new single 'Human Nature' from our international R&B Pop sensation Billy Crawford, taken from his latest album, Groove.
Don’t forget to subscribe: http://bit.ly/1ocCqit
Available on iTunes: https://itunes.apple.com/ph/album/human-nature/id845159938?i=845159981
Welcome to Universal Records’ page! We are the number one independent record label in the Philippines. Home of the best Original Pilipino Music (OPM) artists, our roster includes Gary Valenciano, Regine Velasquez, Ogie Alcasid, Noel Cabangon, Christian Bautista, Gloc-9, Sam Concepcion, Parokya ni Edgar, Sponge Cola, Kamikazee, Calalily, and more.
Subscribe to our channel for exclusive videos including official music videos, lyric videos, album previews and album launch invitations!
Like us on Facebook: https://www.facebook.com/universalrecordsphfanpage
Follow us on Twitter :
https://twitter.com/universalrecph
Provided to YouTube by Virgin Music Group
Never Let Her Slip Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: A...
Provided to YouTube by Virgin Music Group
Never Let Her Slip Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Andrew Gold
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Never Let Her Slip Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Andrew Gold
Auto-generated by YouTube.
kick ass flick from a few years back on the San Francisco rave scene.
published: 07 Aug 2006
Groove - Last Scene (John Digweed - Heaven Scent)
This is the final scene in one of my favorite movies, "Groove"
BEDROCK - John Digweed - Heaven Scent (Soundtrack of GROOVE Movie)
published: 02 Aug 2010
John Digweed - Heaven Scent (GROOVE MOVIE)
BEDROCK - John Digweed - Heaven Scent (Soundtrack of GROOVE Movie)
This is the final scene in one of my favorite movies, "Groove"
HIGH QUALITY SOUND
published: 02 Aug 2010
Groove (2000) House Dance Floor Scene | Cut 003
Groove (2000)
Filmed by Greg Harrison
An inside look into one night in the San Francisco underground rave scene.
Instagram: @films_cuts
#groovefilm #moviegroove
published: 26 Mar 2019
Groove (2000) STARTING TUNE
This is the initial credits. This song is full of energy, the movie is alright but the music is very good. If you like techno/house/electronic music you HAVE to watch it.
published: 16 May 2010
Groove (2000) - Theatrical Trailer
A group of friends and strangers gather for one night in the San Francisco underground rave scene.
Directed by Greg Harrison
Starring Chris Ferreira, Mackenzie Firgens, Elizabeth Sun, Ari Gold, Rachel True
published: 16 Dec 2022
Groove 2000 A Festa Rave / Dj Snaz (DJ Baggadonuts & Greg Sardent - Insanity)
published: 14 Sep 2017
Krush Groove - Full Movie / 1985 (HipHop classic)
Disclaimer: This description is for educational purposes only. We do not own or claim any rights to the content described. All rights belong to the original creators and copyright holders.
This film, inspired by the early days of Def Jam Recordings, follows the journey of Russell Walker, an ambitious manager at the fictional Krush Groove Records. The label represents iconic artists like Run-D.M.C., Dr. Jekyll & Mr. Hyde, and Kurtis Blow, while Rick Rubin crafts the label's hit sound. As Run-D.M.C. scores a breakout hit, Russell faces financial challenges, leading him to borrow money from a street hustler. Meanwhile, a love triangle emerges as Russell and his brother, Run, both compete for the affection of R&B sensation Sheila E. This story captures the excitement, struggles, and relations...
published: 01 Apr 2021
The Viewing Room with Adam & Ethan | Episode 12 | The Emperor's New Groove
Welcome to The Viewing Room on the Dufferin Avenue Media Network! Join Adam and Ethan as they analyze your favourite (and not so favourite) movies! They dive deep into the good, the bad, the great, and what makes it so! Check back every Tuesday for new episodes! It's time for only the second animated film on the podcast! Disney's The Emperor's New Groove!
Check out our Patreon: https://www.patreon.com/DufferinAve
Check out our Instagram page: https://www.instagram.com/theviewingroom_/
Check out Colosseum Presents: https://colosseumpresents.ca/
Sound track for The Emperor's New Groove: https://youtube.com/playlist?list=PL29m8Hu6PyqrkHmdplUzhGx7J4FqqLatT&si=_iQj2xpGAZP0pKHm
Don't follow us on social media:
X (twitter): https://twitter.com/DufferinAveNet
Instagram: https://www.instagram.co...
published: 22 Oct 2024
THE GROOVE TUBE (1974) Trailer
Theatrical trailer for the Ken Shapiro comedy featuring Richard Belzer and Chevy Chase.
Groove (2000)
Filmed by Greg Harrison
An inside look into one night in the San Francisco underground rave scene.
Instagram: @films_cuts
#groovefilm #moviegroov...
Groove (2000)
Filmed by Greg Harrison
An inside look into one night in the San Francisco underground rave scene.
Instagram: @films_cuts
#groovefilm #moviegroove
Groove (2000)
Filmed by Greg Harrison
An inside look into one night in the San Francisco underground rave scene.
Instagram: @films_cuts
#groovefilm #moviegroove
This is the initial credits. This song is full of energy, the movie is alright but the music is very good. If you like techno/house/electronic music you HAVE to...
This is the initial credits. This song is full of energy, the movie is alright but the music is very good. If you like techno/house/electronic music you HAVE to watch it.
This is the initial credits. This song is full of energy, the movie is alright but the music is very good. If you like techno/house/electronic music you HAVE to watch it.
A group of friends and strangers gather for one night in the San Francisco underground rave scene.
Directed by Greg Harrison
Starring Chris Ferreira, Mackenzie...
A group of friends and strangers gather for one night in the San Francisco underground rave scene.
Directed by Greg Harrison
Starring Chris Ferreira, Mackenzie Firgens, Elizabeth Sun, Ari Gold, Rachel True
A group of friends and strangers gather for one night in the San Francisco underground rave scene.
Directed by Greg Harrison
Starring Chris Ferreira, Mackenzie Firgens, Elizabeth Sun, Ari Gold, Rachel True
Disclaimer: This description is for educational purposes only. We do not own or claim any rights to the content described. All rights belong to the original cre...
Disclaimer: This description is for educational purposes only. We do not own or claim any rights to the content described. All rights belong to the original creators and copyright holders.
This film, inspired by the early days of Def Jam Recordings, follows the journey of Russell Walker, an ambitious manager at the fictional Krush Groove Records. The label represents iconic artists like Run-D.M.C., Dr. Jekyll & Mr. Hyde, and Kurtis Blow, while Rick Rubin crafts the label's hit sound. As Run-D.M.C. scores a breakout hit, Russell faces financial challenges, leading him to borrow money from a street hustler. Meanwhile, a love triangle emerges as Russell and his brother, Run, both compete for the affection of R&B sensation Sheila E. This story captures the excitement, struggles, and relationships that defined the rise of hip-hop culture.
Get your NAGA Gear: https://naga-clothing.de
Disclaimer: This description is for educational purposes only. We do not own or claim any rights to the content described. All rights belong to the original creators and copyright holders.
This film, inspired by the early days of Def Jam Recordings, follows the journey of Russell Walker, an ambitious manager at the fictional Krush Groove Records. The label represents iconic artists like Run-D.M.C., Dr. Jekyll & Mr. Hyde, and Kurtis Blow, while Rick Rubin crafts the label's hit sound. As Run-D.M.C. scores a breakout hit, Russell faces financial challenges, leading him to borrow money from a street hustler. Meanwhile, a love triangle emerges as Russell and his brother, Run, both compete for the affection of R&B sensation Sheila E. This story captures the excitement, struggles, and relationships that defined the rise of hip-hop culture.
Get your NAGA Gear: https://naga-clothing.de
Welcome to The Viewing Room on the Dufferin Avenue Media Network! Join Adam and Ethan as they analyze your favourite (and not so favourite) movies! They dive de...
Welcome to The Viewing Room on the Dufferin Avenue Media Network! Join Adam and Ethan as they analyze your favourite (and not so favourite) movies! They dive deep into the good, the bad, the great, and what makes it so! Check back every Tuesday for new episodes! It's time for only the second animated film on the podcast! Disney's The Emperor's New Groove!
Check out our Patreon: https://www.patreon.com/DufferinAve
Check out our Instagram page: https://www.instagram.com/theviewingroom_/
Check out Colosseum Presents: https://colosseumpresents.ca/
Sound track for The Emperor's New Groove: https://youtube.com/playlist?list=PL29m8Hu6PyqrkHmdplUzhGx7J4FqqLatT&si=_iQj2xpGAZP0pKHm
Don't follow us on social media:
X (twitter): https://twitter.com/DufferinAveNet
Instagram: https://www.instagram.com/dufferinavemedia/
Facebook: https://www.facebook.com/people/Dufferin-Ave-Media-Network/61557492890012/
TikTok: https://www.tiktok.com/@duffavemedia
Welcome to The Viewing Room on the Dufferin Avenue Media Network! Join Adam and Ethan as they analyze your favourite (and not so favourite) movies! They dive deep into the good, the bad, the great, and what makes it so! Check back every Tuesday for new episodes! It's time for only the second animated film on the podcast! Disney's The Emperor's New Groove!
Check out our Patreon: https://www.patreon.com/DufferinAve
Check out our Instagram page: https://www.instagram.com/theviewingroom_/
Check out Colosseum Presents: https://colosseumpresents.ca/
Sound track for The Emperor's New Groove: https://youtube.com/playlist?list=PL29m8Hu6PyqrkHmdplUzhGx7J4FqqLatT&si=_iQj2xpGAZP0pKHm
Don't follow us on social media:
X (twitter): https://twitter.com/DufferinAveNet
Instagram: https://www.instagram.com/dufferinavemedia/
Facebook: https://www.facebook.com/people/Dufferin-Ave-Media-Network/61557492890012/
TikTok: https://www.tiktok.com/@duffavemedia
This is an audio version of the Wikipedia Article:
https://en.wikipedia.org/wiki/Groove_(engineering)
00:00:51 See also
Listening is a more natural way of learning, when compared to reading. Written language only began at around 3200 BC, but spoken language has existed long ago.
Learning by listening is a great way to:
- increases imagination and understanding
- improves your listening skills
- improves your own spoken accent
- learn while on the move
- reduce eye strain
Now learn the vast amount of general knowledge available on Wikipedia through audio (audio article). You could even learn subconsciously by playing the audio while you are sleeping! If you are planning to listen a lot, you could try using a bone conduction headphone, or a standard speaker instead of ...
Our first showcase together as Groove Engineers crew =)
published: 17 Mar 2013
Making a new CAT D11R Dozer Cylinder Rod | Machining & Welding
This video is a job we did to make a new hydraulic cylinder rod for a Caterpillar D11R Dozer blade lift cylinder. The rod has a big groove in it and the chrome is damaged so needs to be replaced. The cylinder rod eye bearing also has some damaged. This shows the step by step process to make the new cylinder rod including machining and welding. To start, we machine and part the eye off the cylinder rod before pushing out the damaged bearing from the eye using our 150T tonne hydraulic press. We machine up the new cylinder rod using a 4” inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we machine through the induction hardened chrome layer before turning down the OD to fit the piston and cutting the 12tpi external thread for the nut....
published: 25 Jun 2021
MILLED SLOT AND GROOVE DRILL PIPE معرفه نوع الانبوب ووزنه
This is an audio version of the Wikipedia Article:
https://en.wikipedia.org/wiki/Groove_(engineering)
00:00:51 See also
Listening is a more natural ...
This is an audio version of the Wikipedia Article:
https://en.wikipedia.org/wiki/Groove_(engineering)
00:00:51 See also
Listening is a more natural way of learning, when compared to reading. Written language only began at around 3200 BC, but spoken language has existed long ago.
Learning by listening is a great way to:
- increases imagination and understanding
- improves your listening skills
- improves your own spoken accent
- learn while on the move
- reduce eye strain
Now learn the vast amount of general knowledge available on Wikipedia through audio (audio article). You could even learn subconsciously by playing the audio while you are sleeping! If you are planning to listen a lot, you could try using a bone conduction headphone, or a standard speaker instead of an earphone.
Listen on Google Assistant through Extra Audio:
https://assistant.google.com/services/invoke/uid/0000001a130b3f91
Other Wikipedia audio articles at:
https://www.youtube.com/results?search_query=wikipedia+tts
Upload your own Wikipedia articles through:
https://github.com/nodef/wikipedia-tts
Speaking Rate: 0.9648691227540633
Voice name: en-AU-Wavenet-B
"I cannot teach anybody anything, I can only make them think."
- Socrates
SUMMARY
=======
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include:
A canal cut in a hard material, usually metal. This canal can be round, oval or an arc in order to receive another component such as a boss, a tongue or a gasket. It can also be on the circumference of a dowel, a bolt, an axle or on the outside or inside of a tube or pipe etc. This canal may receive a circlip an o-ring or a gasket.
A depression on the entire circumference of a cast or machined wheel, a pulley or sheave. This depression may receive a cable, a rope or a belt.
A longitudinal channel formed in a hot rolled rail profile such as a grooved rail. This groove is for the flange on a train wheel.
This is an audio version of the Wikipedia Article:
https://en.wikipedia.org/wiki/Groove_(engineering)
00:00:51 See also
Listening is a more natural way of learning, when compared to reading. Written language only began at around 3200 BC, but spoken language has existed long ago.
Learning by listening is a great way to:
- increases imagination and understanding
- improves your listening skills
- improves your own spoken accent
- learn while on the move
- reduce eye strain
Now learn the vast amount of general knowledge available on Wikipedia through audio (audio article). You could even learn subconsciously by playing the audio while you are sleeping! If you are planning to listen a lot, you could try using a bone conduction headphone, or a standard speaker instead of an earphone.
Listen on Google Assistant through Extra Audio:
https://assistant.google.com/services/invoke/uid/0000001a130b3f91
Other Wikipedia audio articles at:
https://www.youtube.com/results?search_query=wikipedia+tts
Upload your own Wikipedia articles through:
https://github.com/nodef/wikipedia-tts
Speaking Rate: 0.9648691227540633
Voice name: en-AU-Wavenet-B
"I cannot teach anybody anything, I can only make them think."
- Socrates
SUMMARY
=======
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include:
A canal cut in a hard material, usually metal. This canal can be round, oval or an arc in order to receive another component such as a boss, a tongue or a gasket. It can also be on the circumference of a dowel, a bolt, an axle or on the outside or inside of a tube or pipe etc. This canal may receive a circlip an o-ring or a gasket.
A depression on the entire circumference of a cast or machined wheel, a pulley or sheave. This depression may receive a cable, a rope or a belt.
A longitudinal channel formed in a hot rolled rail profile such as a grooved rail. This groove is for the flange on a train wheel.
This video is a job we did to make a new hydraulic cylinder rod for a Caterpillar D11R Dozer blade lift cylinder. The rod has a big groove in it and the chrome ...
This video is a job we did to make a new hydraulic cylinder rod for a Caterpillar D11R Dozer blade lift cylinder. The rod has a big groove in it and the chrome is damaged so needs to be replaced. The cylinder rod eye bearing also has some damaged. This shows the step by step process to make the new cylinder rod including machining and welding. To start, we machine and part the eye off the cylinder rod before pushing out the damaged bearing from the eye using our 150T tonne hydraulic press. We machine up the new cylinder rod using a 4” inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we machine through the induction hardened chrome layer before turning down the OD to fit the piston and cutting the 12tpi external thread for the nut. Then we machine the other end of the rod to weld prep for the rod eye by machining a bevel and drilling a hole for the eye spigot. The eye is welded on using metal cored wire and because the customer wants the rod to look as standard as possible we set it back up in the lathe and machine down the weld. The new busing we cryo freeze and shrink fit with liquid nitrogen. We finish it off with a quick paint job before cleaning, wrapping and strapping the new rod and send it on it’s way to the customer.
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
- HMP-150T Hydraulic press
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
Official CEE Merch shop: https://www.ceeshop.com.au
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Song: Ain't nobody like you by Wildflowers
#australianmachinist #machineshop #machinist
This video is a job we did to make a new hydraulic cylinder rod for a Caterpillar D11R Dozer blade lift cylinder. The rod has a big groove in it and the chrome is damaged so needs to be replaced. The cylinder rod eye bearing also has some damaged. This shows the step by step process to make the new cylinder rod including machining and welding. To start, we machine and part the eye off the cylinder rod before pushing out the damaged bearing from the eye using our 150T tonne hydraulic press. We machine up the new cylinder rod using a 4” inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we machine through the induction hardened chrome layer before turning down the OD to fit the piston and cutting the 12tpi external thread for the nut. Then we machine the other end of the rod to weld prep for the rod eye by machining a bevel and drilling a hole for the eye spigot. The eye is welded on using metal cored wire and because the customer wants the rod to look as standard as possible we set it back up in the lathe and machine down the weld. The new busing we cryo freeze and shrink fit with liquid nitrogen. We finish it off with a quick paint job before cleaning, wrapping and strapping the new rod and send it on it’s way to the customer.
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
- HMP-150T Hydraulic press
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
Official CEE Merch shop: https://www.ceeshop.com.au
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Song: Ain't nobody like you by Wildflowers
#australianmachinist #machineshop #machinist
Provided to YouTube by Virgin Music Group
Let's Groove · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Wayne Vaughn
Composer, Writer: Maurice White
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Steal Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Rick Chudacoff
Composer, Writer: Robbie Dupuis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
Human Nature · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Steve Parcaro
Composer, Writer: John Bettis
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
You've Got a Friend · Billy Crawford · Nikki Gil
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Carole King
Auto-generated by YouTube.
Provided to YouTube by Virgin Music Group
How Sweet It Is · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Eddie Holland
Composer, Writer: Lamont Dozier
Composer, Writer: Brian Holland
Auto-generated by YouTube.
Brand new single 'Human Nature' from our international R&B Pop sensation Billy Crawford, taken from his latest album, Groove.
Don’t forget to subscribe: http://bit.ly/1ocCqit
Available on iTunes: https://itunes.apple.com/ph/album/human-nature/id845159938?i=845159981
Welcome to Universal Records’ page! We are the number one independent record label in the Philippines. Home of the best Original Pilipino Music (OPM) artists, our roster includes Gary Valenciano, Regine Velasquez, Ogie Alcasid, Noel Cabangon, Christian Bautista, Gloc-9, Sam Concepcion, Parokya ni Edgar, Sponge Cola, Kamikazee, Calalily, and more.
Subscribe to our channel for exclusive videos including official music videos, lyric videos, album previews and album launch invitations!
Like us on Facebook: https://www.facebook.com/universalrecordsphfanpage
Follow us on Twitter :
https://twitter.com/universalrecph
Provided to YouTube by Virgin Music Group
Never Let Her Slip Away · Billy Crawford
Groove
℗ 2009 UR Philippines
Released on: 2009-01-01
Composer, Writer: Andrew Gold
Auto-generated by YouTube.
Groove is the fifth studio album from PhilippinePop and R&B singer Billy Crawford. The album was released on iTunes on May 1st, 2009. It was also made available in physical form in 2009. The new album is a re-working of classic hits from the 1970s to the 1980s.
Track listing
Steal Away (originally popularized by Robbie Dupree)
Groove (2000)
Filmed by Greg Harrison
An inside look into one night in the San Francisco underground rave scene.
Instagram: @films_cuts
#groovefilm #moviegroove
This is the initial credits. This song is full of energy, the movie is alright but the music is very good. If you like techno/house/electronic music you HAVE to watch it.
A group of friends and strangers gather for one night in the San Francisco underground rave scene.
Directed by Greg Harrison
Starring Chris Ferreira, Mackenzie Firgens, Elizabeth Sun, Ari Gold, Rachel True
Disclaimer: This description is for educational purposes only. We do not own or claim any rights to the content described. All rights belong to the original creators and copyright holders.
This film, inspired by the early days of Def Jam Recordings, follows the journey of Russell Walker, an ambitious manager at the fictional Krush Groove Records. The label represents iconic artists like Run-D.M.C., Dr. Jekyll & Mr. Hyde, and Kurtis Blow, while Rick Rubin crafts the label's hit sound. As Run-D.M.C. scores a breakout hit, Russell faces financial challenges, leading him to borrow money from a street hustler. Meanwhile, a love triangle emerges as Russell and his brother, Run, both compete for the affection of R&B sensation Sheila E. This story captures the excitement, struggles, and relationships that defined the rise of hip-hop culture.
Get your NAGA Gear: https://naga-clothing.de
Welcome to The Viewing Room on the Dufferin Avenue Media Network! Join Adam and Ethan as they analyze your favourite (and not so favourite) movies! They dive deep into the good, the bad, the great, and what makes it so! Check back every Tuesday for new episodes! It's time for only the second animated film on the podcast! Disney's The Emperor's New Groove!
Check out our Patreon: https://www.patreon.com/DufferinAve
Check out our Instagram page: https://www.instagram.com/theviewingroom_/
Check out Colosseum Presents: https://colosseumpresents.ca/
Sound track for The Emperor's New Groove: https://youtube.com/playlist?list=PL29m8Hu6PyqrkHmdplUzhGx7J4FqqLatT&si=_iQj2xpGAZP0pKHm
Don't follow us on social media:
X (twitter): https://twitter.com/DufferinAveNet
Instagram: https://www.instagram.com/dufferinavemedia/
Facebook: https://www.facebook.com/people/Dufferin-Ave-Media-Network/61557492890012/
TikTok: https://www.tiktok.com/@duffavemedia
This is an audio version of the Wikipedia Article:
https://en.wikipedia.org/wiki/Groove_(engineering)
00:00:51 See also
Listening is a more natural way of learning, when compared to reading. Written language only began at around 3200 BC, but spoken language has existed long ago.
Learning by listening is a great way to:
- increases imagination and understanding
- improves your listening skills
- improves your own spoken accent
- learn while on the move
- reduce eye strain
Now learn the vast amount of general knowledge available on Wikipedia through audio (audio article). You could even learn subconsciously by playing the audio while you are sleeping! If you are planning to listen a lot, you could try using a bone conduction headphone, or a standard speaker instead of an earphone.
Listen on Google Assistant through Extra Audio:
https://assistant.google.com/services/invoke/uid/0000001a130b3f91
Other Wikipedia audio articles at:
https://www.youtube.com/results?search_query=wikipedia+tts
Upload your own Wikipedia articles through:
https://github.com/nodef/wikipedia-tts
Speaking Rate: 0.9648691227540633
Voice name: en-AU-Wavenet-B
"I cannot teach anybody anything, I can only make them think."
- Socrates
SUMMARY
=======
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include:
A canal cut in a hard material, usually metal. This canal can be round, oval or an arc in order to receive another component such as a boss, a tongue or a gasket. It can also be on the circumference of a dowel, a bolt, an axle or on the outside or inside of a tube or pipe etc. This canal may receive a circlip an o-ring or a gasket.
A depression on the entire circumference of a cast or machined wheel, a pulley or sheave. This depression may receive a cable, a rope or a belt.
A longitudinal channel formed in a hot rolled rail profile such as a grooved rail. This groove is for the flange on a train wheel.
This video is a job we did to make a new hydraulic cylinder rod for a Caterpillar D11R Dozer blade lift cylinder. The rod has a big groove in it and the chrome is damaged so needs to be replaced. The cylinder rod eye bearing also has some damaged. This shows the step by step process to make the new cylinder rod including machining and welding. To start, we machine and part the eye off the cylinder rod before pushing out the damaged bearing from the eye using our 150T tonne hydraulic press. We machine up the new cylinder rod using a 4” inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we machine through the induction hardened chrome layer before turning down the OD to fit the piston and cutting the 12tpi external thread for the nut. Then we machine the other end of the rod to weld prep for the rod eye by machining a bevel and drilling a hole for the eye spigot. The eye is welded on using metal cored wire and because the customer wants the rod to look as standard as possible we set it back up in the lathe and machine down the weld. The new busing we cryo freeze and shrink fit with liquid nitrogen. We finish it off with a quick paint job before cleaning, wrapping and strapping the new rod and send it on it’s way to the customer.
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
- HMP-150T Hydraulic press
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
Official CEE Merch shop: https://www.ceeshop.com.au
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Song: Ain't nobody like you by Wildflowers
#australianmachinist #machineshop #machinist