Voters in Anthony Albanese’s electorate of Grayndler have rallied behind the prime ministerial hopeful ahead of election day.
published: 20 May 2022
Candidates face-off on Climate change in Grayndler debate
Anthony Albanese has faced off against Greens candidate Jim Casey at an election forum held in the safe Labor seat of Grayndler in Sydney's inner-west.
published: 11 May 2019
Anthony Albanese to nominate for Grayndler - 28 January 2016
Anthony will be nominating for preselection to contest the next federal election as the Labor Candidate for Grayndler.
published: 28 Jan 2016
Grinding & Blending a Weld
This will describing how you blend out weld on a flat surface. The first step is to have a good weld; good Fit up (parts need to be aligned perfectly before welding, no porosity (gas bubbles in your weld), good penetration (so you don't grind off all the material holding your parts together), and no undercuts (the edges of your welds don't have groves or channels cut below the surface of the base material, from too much heat or not enough filler metal).
Always wear your safety gear, keep your parts clamped down securely, and keep the guard on the machine.
The basic premise is to start with your coarse grits, and only hit the high spots initially. You don't want to over grind the area on either side of your weld, and you don't want to grind grooves and deep scratches in your part. So kee...
published: 30 Nov 2018
Grayndler Commemorations for the ANZAC Centenary
published: 29 May 2015
Election Day at Grayndler | UTS Journalism Lab
Fred Pawle covers Anthony Albanese's seat of Grayndler.
published: 21 May 2022
Sydney seat of Grayndler: Greens candidate Jim Casey - The Feed
Where's Anthony Albanese? And where the bloody hell are we? Jan Fran talks all the hot election topics with Greens candidate for the seat of Grayndler, Jim Casey.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
published: 28 Jun 2016
Division Of Grayndler
The Division of Grayndler is an Australian electoral division in the state of New South Wales.
published: 22 May 2022
Better the devil you know in Grayndler
Better the devil you know in Grayndler
Subscribe to the Guardian HERE: http://bitly.com/UvkFpD
Constituents of the deputy prime minister, Anthony Albanese, are sick of political infighting and just want someone to deliver services they need. For many, it's better the devil you know.
published: 12 Aug 2013
Sean Kelly and Lachlan Harris in Grayndler- The Feed
Anthony Albanese declined to appear, so journalists and former ALP staffers Sean Kelly and Lachlan Harris sat down with Jan Fran to talk about Australian Labor Party's struggle in the area.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Anthony Albanese has faced off against Greens candidate Jim Casey at an election forum held in the safe Labor seat of Grayndler in Sydney's inner-west.
Anthony Albanese has faced off against Greens candidate Jim Casey at an election forum held in the safe Labor seat of Grayndler in Sydney's inner-west.
Anthony Albanese has faced off against Greens candidate Jim Casey at an election forum held in the safe Labor seat of Grayndler in Sydney's inner-west.
This will describing how you blend out weld on a flat surface. The first step is to have a good weld; good Fit up (parts need to be aligned perfectly before wel...
This will describing how you blend out weld on a flat surface. The first step is to have a good weld; good Fit up (parts need to be aligned perfectly before welding, no porosity (gas bubbles in your weld), good penetration (so you don't grind off all the material holding your parts together), and no undercuts (the edges of your welds don't have groves or channels cut below the surface of the base material, from too much heat or not enough filler metal).
Always wear your safety gear, keep your parts clamped down securely, and keep the guard on the machine.
The basic premise is to start with your coarse grits, and only hit the high spots initially. You don't want to over grind the area on either side of your weld, and you don't want to grind grooves and deep scratches in your part. So keep the angle grinder moving, keep the grinding angle low, and keep crossing the direction of each swipe of the grinder.
This will describing how you blend out weld on a flat surface. The first step is to have a good weld; good Fit up (parts need to be aligned perfectly before welding, no porosity (gas bubbles in your weld), good penetration (so you don't grind off all the material holding your parts together), and no undercuts (the edges of your welds don't have groves or channels cut below the surface of the base material, from too much heat or not enough filler metal).
Always wear your safety gear, keep your parts clamped down securely, and keep the guard on the machine.
The basic premise is to start with your coarse grits, and only hit the high spots initially. You don't want to over grind the area on either side of your weld, and you don't want to grind grooves and deep scratches in your part. So keep the angle grinder moving, keep the grinding angle low, and keep crossing the direction of each swipe of the grinder.
Where's Anthony Albanese? And where the bloody hell are we? Jan Fran talks all the hot election topics with Greens candidate for the seat of Grayndler, Jim Case...
Where's Anthony Albanese? And where the bloody hell are we? Jan Fran talks all the hot election topics with Greens candidate for the seat of Grayndler, Jim Casey.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Where's Anthony Albanese? And where the bloody hell are we? Jan Fran talks all the hot election topics with Greens candidate for the seat of Grayndler, Jim Casey.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Better the devil you know in Grayndler
Subscribe to the Guardian HERE: http://bitly.com/UvkFpD
Constituents of the deputy prime minister, Anthony Albanese, ar...
Better the devil you know in Grayndler
Subscribe to the Guardian HERE: http://bitly.com/UvkFpD
Constituents of the deputy prime minister, Anthony Albanese, are sick of political infighting and just want someone to deliver services they need. For many, it's better the devil you know.
Better the devil you know in Grayndler
Subscribe to the Guardian HERE: http://bitly.com/UvkFpD
Constituents of the deputy prime minister, Anthony Albanese, are sick of political infighting and just want someone to deliver services they need. For many, it's better the devil you know.
Anthony Albanese declined to appear, so journalists and former ALP staffers Sean Kelly and Lachlan Harris sat down with Jan Fran to talk about Australian Labor...
Anthony Albanese declined to appear, so journalists and former ALP staffers Sean Kelly and Lachlan Harris sat down with Jan Fran to talk about Australian Labor Party's struggle in the area.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Anthony Albanese declined to appear, so journalists and former ALP staffers Sean Kelly and Lachlan Harris sat down with Jan Fran to talk about Australian Labor Party's struggle in the area.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Anthony Albanese has faced off against Greens candidate Jim Casey at an election forum held in the safe Labor seat of Grayndler in Sydney's inner-west.
This will describing how you blend out weld on a flat surface. The first step is to have a good weld; good Fit up (parts need to be aligned perfectly before welding, no porosity (gas bubbles in your weld), good penetration (so you don't grind off all the material holding your parts together), and no undercuts (the edges of your welds don't have groves or channels cut below the surface of the base material, from too much heat or not enough filler metal).
Always wear your safety gear, keep your parts clamped down securely, and keep the guard on the machine.
The basic premise is to start with your coarse grits, and only hit the high spots initially. You don't want to over grind the area on either side of your weld, and you don't want to grind grooves and deep scratches in your part. So keep the angle grinder moving, keep the grinding angle low, and keep crossing the direction of each swipe of the grinder.
Where's Anthony Albanese? And where the bloody hell are we? Jan Fran talks all the hot election topics with Greens candidate for the seat of Grayndler, Jim Casey.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/
Better the devil you know in Grayndler
Subscribe to the Guardian HERE: http://bitly.com/UvkFpD
Constituents of the deputy prime minister, Anthony Albanese, are sick of political infighting and just want someone to deliver services they need. For many, it's better the devil you know.
Anthony Albanese declined to appear, so journalists and former ALP staffers Sean Kelly and Lachlan Harris sat down with Jan Fran to talk about Australian Labor Party's struggle in the area.
Facebook: https://www.facebook.com/SBS2Australia
Twitter: https://twitter.com/thefeedsbs
Insta: https://instagram.com/sbs2australia
Tumblr: http://thefeedsbs.tumblr.com/