On My Loom Now 📸

 When I start something new, I usually weave some towels to get use to the changes. New dobby on the loom, so more towels.  

This is a 16 shaft twill and basket weave, most likely from Handweaving.net but I seem to have misplaced the number. It drove me crazy looking for threading errors! So I have declared there were none....

8 yard warp of Venne cotton and all wefts used for the 7 towels will be linen. This is 9/2 French linen from Brassards. The reverse side is darker....a mirror image.

It’s good to be weaving again, even if for short periods. If my back starts to make its presence known, I stop or move onto something else. 

The draft is nifty and I have had it in my ‘to-do’ file for a long time. There was a post it note attached with the handweaving.net number and it dropped off. I checked my copy on Fiberworks as I usually keep the number under the ‘notes and records’ and I didn’t add it….. but this would have been years ago so I’ll just have to look around on the website.

I’m also enjoying the weaving and looking at it from the view point of where to add colour in the warp next time I weave it up again. How to make the celtic knot work more ‘out there.' 

Busy Bee 🐝 Mother Earth

To close out October (where did the month go? 😳 )  .... some spinning show and tell for you.  This pretty fibre came from  "Beesybee Fibers" on Etsy. They have some gorgeous colour ways and quick shipping.

 

It was a lovely spin up with very high quality fibre.  This has a fine micron wool blended with silk.  Some other colours may have fallen into the shopping cart too.   Oops... 😁

All washed up and some were made into cakes for convenience.... and a skein as it's a classic. 

Now that I'm back weaving, I'm spinning less but enjoy the time on the Hansen very much. No regrets buying this e-spinner one bit. 

Swan Song

 Today, my Spring loom hit the road in a comfortable ride to its new home about 2-3 hours drive south of us here on Vancouver Island.   It was hard to feel sad when the new owner, a lovely lady and friend, was so darn excited!

Here's the loom in her little nook, and photographed from outside.  Looks cozy huh?  

Her start began 16 years ago in October 2008 when two large boxes were delivered and I began to set her up.  She came pretty well trussed up!

Louet does things very well and even use combinations of very heavy cardboard with sections of wood for strength.  It's a long and sometimes rough road from Holland to their destinations.

With a 90 cm or 34 inch weaving width, she handled many projects but this was her widest. A blanket for my new grand daughter. I had to tie back the unused heddles!

Her narrowest project was 2 inch wide book marks, sett 50 epi.    I'm doing the tie up in this shot.

As you can see, with the Spring 90 being lighter, lifting her up to do tie up's is a big help for those of us with creaky joints.  She maybe small, and light on her feet, but she can do anything the Big Boys do!

This was her last lift for a tie up.... and that tie up is in place for the new owner to try out. 

All cleaned up and stripped down (to a point) and ready to go.  Bench and assorted stuff to go along.

Today, She was carried out to a comfy trailer to travel in comfort and stay dry.

Big supply of pillows, blankets to cover any bare spots!

And as I wrote this last part, the phone rang and they are now home after a long day and the loom is sitting next to her Fanny loom and settling in.   

I'll share the Spring's last weaving project in my next post..... we have had dark skies and atmospheric rivers of rain so not conducive to taking pictures lately. 

EDIT:   The morning after......  going to have to think on some decorating ideas.....

SOLD :Seeking a New Home

SOLD  (wow that was fast! 😳)

For Sale: 12 shaft / 14 treadle Louet Spring 90cm (35 1/2 ”) Loom

This small but mighty countermarch loom is a real little workhorse ! I have woven everything  but rugs on this loom; from light laces to shawls, scarves, towels and table linens. You can use just 2 shafts, 4 or 8 or more and it will grow with your weaving experience.

Its small floor 'foot print’ makes it ideal for smaller homes and spaces, and it does everything the larger floor looms do.  Louet’s beautiful craftsmanship and well thought out designs makes for easy warping. It features a floating breast beam for the same tension every time you advance the warp.  CD byJane Stafford comes along as a bonus on how to beam a warp. 

There is a generous shed and easy action on the treadles. Front attached treadles and all cords run over pulleys and so is easy on your joints . I was able to weave right up to joint replacement surgery and again at 4-5 weeks post op. 

Tie ups are straightforward but the loom can be carefully lifted up onto crates and then sit to do the tie up. The photo above shows my current and last shawl project nearly completed, so it's all tied up for a lovely 8 shaft huck lace and I will leave this tie up in place and provide a copy of the draft. Wind and beam a warp, and weave right away.   

Its time to sell due to health issues.   Visit  https://www.ravelry.com/projects/Weever   Any project here that is 12 shafts or less was woven on this lovely loom.  

This package includes:

• Loom, new in October 2008, with 12 shafts and 14 treadles   (current value to purchase new: $10,500.00)
• Over 1200 heddles, and scads of texsolv tie up cords.
• Woolhouse Tools commuter bench (new 1997), adjustable height, seat can slide to reach treadles or be pinned in place. Made from hand select birch and Danish oil finish. (value: $450.00)
• Louet made second warp beam (not attached and needs a small modification to fit)  (value: $850+  )
• 5 reeds: 39” 6 dent, 36” 8 dent, 36” 10 dent, 36” 12 dent, & 36” 15 dent  (value: $170.00 each x 5)  
• 3D printed covers for the built in raddle  (value: $25.00)
• 3D printed slip covers for treadle screw covers (value: $38.00)
• A set of “Helping Hands” by Lofty Fibers (3D printed) warping assist brackets (value: $48.00)
• Pair of original lease sticks
• A set of 16 Louet warping sticks (value: $36.00)
• A 12” Leclerc shuttle and 3 bobbins (value: $55.00)
• Leclerc reed hook, and a reed sley hook
• 14 yard warping board, that comes apart for storage (value: $150.00)
• Original manuals and paperwork

Its a complete weaving package and all you need to add is the yarn!

Loom is pick up only in Campbell River, BC, Canada. Dimensions can be provided .    Please contact me if you have any questions or would like to view by prior arrangement..

Asking: $4800.00 for all. Susan  / [email protected] 

 Now if you have trouble getting down to do a tie up:  I recommend two people to do the lift and to set it back down. Then I would sit on a low stool and do the tie up cords. I print up the tie up square and isolate the row I'm working on.    (do a quick one tie to secure  the treadles that won't be used so they don't flop around when the loom is being shifted up or down) I have never left tie up cords in place and only used enough for the tie up in play. Spare cords hanging confuse the view and can tangle up and cause issues. Usually when changing the tie up to a new draft, some cords will be in the right place already and only a few need changing. 

Helping Hands being used on the Spring

Blog post with the process

I've approx 25 inches more to weave on the last project.... and saying good bye with each pick.  🥹 

Write me if you have any questions.....

Illuminations

 I have another spinning show and tell for you!   I bought some pretty roving from a UK company called Fellview Fibres.     They have consistently beautiful colorways and quality fibres to spin up. A real treat for the senses.

This roving colorway was inspired by the illuminated manuscripts from various ancient abbeys such as Lindisfarne and the Book of Kells.  Carol has three or four colour ways in this series but this one appealed to me for its softness of yarn and color.

The truth was it was a bit of a challenge to spin as the fine merino and silk liked to stay separate and it was a struggle at times to keep a flow moving. So it was a slow spin up and I would do a 50 gram amount and then do something else for a change and then go back and do another.  Eventually, when I dug for another bundle, it was all gone. 

So this was apparently the last 50 gram ball to be spun up.... and the balance shown were in various stages.   Such as 'on the rack' or noddy noddy.

All skeined up and ready for a soaking.

Washed and dried and behaving like it was never a 'problem child" 😁

I wound each skein into cakes and they store up nicely, ready for use.  (For sale in my Etsy store: Thrums Textiles)

My next new adventure?   Learning to use a Turkish drop spindle!

A friend convinced me to give them a try. They make a neat little centre pull ball called a 'turtle' and you can easily ply from two turtles.  The spindle parts all come apart for easy storage and for releasing the turtle from captivity!   🐢     Checking the mail box daily for it to come!   I hear they are addictive and you need more than one.... a whole herd perhaps?    😁