Jump to content

Tetramethyllead

From Wikipedia, the free encyclopedia
Tetramethyllead
Names
Other names
Tetramethylplumbane
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.000.816 Edit this at Wikidata
EC Number
  • 200-897-0
RTECS number
  • TP4725000
UNII
UN number 1649 3082
  • InChI=1S/4CH3.Pb/h4*1H3;
    Key: XOOGZRUBTYCLHG-UHFFFAOYSA-N
  • C[Pb](C)(C)C
Properties
C4H12Pb
Molar mass 267.3 g·mol−1
Hazards
GHS labelling:
GHS02: FlammableGHS06: ToxicGHS07: Exclamation markGHS08: Health hazardGHS09: Environmental hazard
Warning
H226, H300, H302, H310, H332, H360, H373, H410
P201, P202, P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P270, P271, P273, P280, P281, P284, P301+P310, P301+P312, P302+P350, P303+P361+P353, P304+P312, P304+P340, P308+P313, P310, P312, P314, P320, P321, P322, P330, P361, P363, P370+P378, P391, P403+P233, P403+P235, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
2
3
3
Flash point 37.8 °C (100.0 °F; 310.9 K) closed cup
Related compounds
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Tetramethyllead, also called tetra methyllead and lead tetramethyl, is a chemical compound used as an antiknock additive for gasoline.[1] Its use is being phased out for environmental considerations.[2]

The National Institute for Occupational Safety and Health (NIOSH) in the United States has identified tetramethyllead as a potential workplace hazard. The recommended time-weighted average exposure limit to tetramethyllead is 0.075 milligrams per cubic meter during a 10-hour workday; the OSHA permissible exposure limit is the same value assuming an 8-hour workday.

Exposure to tetramethyllead can affect the central nervous system, the kidneys, and the cardiovascular system. Tetramethyllead can be absorbed through inhalation, through eye contact, through skin absorption, and by ingesting the substance. Symptoms of exposure include insomnia, coma, seizure, mania, delirium, loss of appetite, nausea, hypotension, anxiety, restlessness, and nightmares. First aid measures for exposure include artificial respiration, immediate eye irrigation, and immediate washing with water. Immediate medical attention should be sought if tetramethyllead is ingested.[3]

See also

[edit]

References

[edit]
  1. ^ "Tetramethyllead". pubchem.ncbi.nlm.nih.gov.
  2. ^ Filella, Montserrat; Bonet, Josep (2017). "Chapter 14. Environmental Impact of Alkyl Lead(IV) Derivatives: Perspective after Their Phase-out". In Astrid, S.; Helmut, S.; Sigel, R. K. O. (eds.). Lead: Its Effects on Environment and Health. Metal Ions in Life Sciences. Vol. 17. de Gruyter. pp. 471–490. doi:10.1515/9783110434330-014. PMID 28731307.
  3. ^ "CDC - NIOSH Pocket Guide to Chemical Hazards - Tetramethyl lead (as Pb)". www.cdc.gov. Retrieved 2016-06-07.