Table of Contents
8 传感器
每个传感器芯片在sysfs /sys/devices 都有自己的目录。 要找到所有的传感器芯片，从/sys/class/hwmon/hwmon*跟踪设备的符号链接更容易 , 这里 * is 是个数字 (0,1,2,...)。
对于虚拟设备，传感器读数在 /sys/class/hwmon/hwmon*/ 目录, 对于非虚拟设备，传感器读数在 /sys/class/hwmon/hwmon*/device 目录。 hwmon* 或 hwmon*/device 目录中一个叫name的文件 包含该芯片的名称, 它对应于传感器芯片所使用的内核驱动程序的名称。
每个文件只有一个传感器读取值。 在上面提到的目录中包含传感器读数的文件的命令常用方案是: <type><number>_<item>, 这里
- type - 对于传感器芯片： "in" (电压), "temp" (温度), "fan" (风扇), 等，
- item - "input" (测量值), "max" (高阈值), "min" (低阈值), 等,
- number - 总是用于可以不止一次出现的元素 (经常从 1开始, 除了电压从 0开始)， 如果文件不引用特定的元素，则它们的名称简单，没有数字。
可以通过 sensor-detect 和sensors 工具获取主机上可用的传感器信息(lm-sensors package: http://lm-sensors.org/)。 Sensors-detect 帮助确定哪些模块对于可用的传感器是必需的。 当模块加载 sensors 程序时可以用来显示所有传感器芯片的读数。 该程序使用的传感器读数的标记可以和常规的命名方案不同 (<type><number>_<item> ):
- 如果有一个名为 <type><number>_label的文件, 那么该文件中的标签会代替 <type><number><item> 名字;
- 如果没有名为 <type><number>_label 的文件, 那么程序会在 /etc/sensors.conf (也许会为/etc/sensors3.conf, 或其他的) 文件中找name的替代标签。
这个标签允许用户决定使用什么样的硬件。 如果既没有 <type><number>_label 文件，配置文件中也没有label ，那么硬件的类型可以由分配的名字 (hwmon*/device/name)决定。 zabbix_agent接受的传感器的实际名称可以通过运行 sensors 程序带着 -u 参数 (sensors -u).
在sensor 程序中，可用的传感器被总线类型 (ISA适配器，PCI适配器，SPI适配器，虚拟设备，ACPI接口，HID适配器)分开。
Linux 2.4:
(传感器读数从/ proc/sys/dev/sensor目录获得)
- device - 设备名字 (如果使用了<mode>， 则是正则表达式);
- sensor - 传感器名字 (如果使用了<mode>， 则是正则表达式);
- mode - 可能的值: avg, max, min (如果忽略了这个参数，设备和传感器将逐字处理)。
例子: sensor[w83781d-i2c-0-2d,temp1]
在Zabbix 1.8.4之前，使用了sensor[temp1]格式。
Linux 2.6+:
(传感器读数从/ sys / class / hwmon目录获得)
- device - 设备名称(非正则表达式)。 设备名称可以是设备的实际名称(e.g 0000:00:18.3)或使用传感器程序获取得的名称(例如:k8temp-pci-00c3)，这由用户决定使用哪个名称;
- sensor - 传感器名称(非正则表达式);
- mode - 可能的值: avg, max, min (如果忽略了这个参数，设备和传感器将逐字处理)。
例如:
sensor[k8temp-pci-00c3,temp, max] 或 sensor[0000:00:18.3,temp1]
sensor[smsc47b397-isa-0880,in, avg] 或 sensor[smsc47b397.2176,in1]
获取传感器的名字
传感器标签，由sensors命令打印，不能总是被直接使用，因为标签的命名对于每个传感器芯片供应商来说可能是不同的。 例如, sensors 输出可能包含以下几行:
$ sensors
in0: +2.24 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.15 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.30 V (min = +2.97 V, max = +3.63 V)
+12V: +13.00 V (min = +0.00 V, max = +15.94 V)
M/B Temp: +30.0°C (low = -127.0°C, high = +127.0°C)在这些情况下，只有一个标签可以直接使用:
尝试使用其他标签 (像 Vcore 或 +12V) 是不会起作用的。
为了找到实际的Zabbix可以使用它来检索读数的传感器名称，运行 sensors -u命令。 在输出中，可以看到到以下内容:
$ sensors -u
...
Vcore:
in1_input: 1.15
in1_min: 0.00
in1_max: 2.99
in1_alarm: 0.00
...
+12V:
in4_input: 13.00
in4_min: 0.00
in4_max: 15.94
in4_alarm: 0.00
...所有Vcore 应该检索 in1,+12V 应该检索 in4.1
不止 电压 (in), 还有 电流 (curr), 温度 (temp) 和 风扇转速 (fan) 的读数都可以被Zabbix 检索到。
8 Sensor
Each sensor chip gets its own directory in the sysfs /sys/devices tree. To find all sensor chips, it is easier to follow the device symlinks from /sys/class/hwmon/hwmon*, where * is a real number (0,1,2,...).
The sensor readings are located either in /sys/class/hwmon/hwmon*/ directory for virtual devices, or in /sys/class/hwmon/hwmon*/device directory for non-virtual devices. A file, called name, located inside hwmon* or hwmon*/device directories contains the name of the chip, which corresponds to the name of the kernel driver used by the sensor chip.
There is only one sensor reading value per file. The common scheme for naming the files that contain sensor readings inside any of the directories mentioned above is: <type><number>_<item>, where
- type - for sensor chips is "in" (voltage), "temp" (temperature), "fan" (fan), etc.,
- item - "input" (measured value), "max" (high threshold), "min" (low threshold), etc.,
- number - always used for elements that can be present more than once (usually starts from 1, except for voltages which start from 0). If files do not refer to a specific element they have a simple name with no number.
The information regarding sensors available on the host can be acquired using sensor-detect and sensors tools (lm-sensors package: http://lm-sensors.org/). Sensors-detect helps to determine which modules are necessary for available sensors. When modules are loaded the sensors program can be used to show the readings of all sensor chips. The labeling of sensor readings, used by this program, can be different from the common naming scheme (<type><number>_<item> ):
- if there is a file called <type><number>_label, then the label inside this file will be used instead of <type><number><item> name;
- if there is no <type><number>_label file, then the program searches inside the /etc/sensors.conf (could be also /etc/sensors3.conf, or different) for the name substitution.
This labeling allows user to determine what kind of hardware is used. If there is neither <type><number>_label file nor label inside the configuration file the type of hardware can be determined by the name attribute (hwmon*/device/name). The actual names of sensors, which zabbix_agent accepts, can be obtained by running sensors program with -u parameter (sensors -u).
In sensor program the available sensors are separated by the bus type (ISA adapter, PCI adapter, SPI adapter, Virtual device, ACPI interface, HID adapter).
On Linux 2.4:
(Sensor readings are obtained from /proc/sys/dev/sensors directory)
- device - device name (if <mode> is used, it is a regular expression);
- sensor - sensor name (if <mode> is used, it is a regular expression);
- mode - possible values: avg, max, min (if this parameter is omitted, device and sensor are treated verbatim).
Example key: sensor[w83781d-i2c-0-2d,temp1]
Prior to Zabbix 1.8.4, the sensor[temp1] format was used.
On Linux 2.6+:
(Sensor readings are obtained from /sys/class/hwmon directory)
- device - device name (non regular expression). The device name could be the actual name of the device (e.g 0000:00:18.3) or the name acquired using sensors program (e.g. k8temp-pci-00c3). It is up to the user to choose which name to use;
- sensor - sensor name (non regular expression);
- mode - possible values: avg, max, min (if this parameter is omitted, device and sensor are treated verbatim).
Example key:
sensor[k8temp-pci-00c3,temp, max] or sensor[0000:00:18.3,temp1]
sensor[smsc47b397-isa-0880,in, avg] or sensor[smsc47b397.2176,in1]
Obtaining sensor names
Sensor labels, as printed by the sensors command, cannot always be used directly because the naming of labels may be different for each sensor chip vendor. For example, sensors output might contain the following lines:
$ sensors
in0: +2.24 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.15 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.30 V (min = +2.97 V, max = +3.63 V)
+12V: +13.00 V (min = +0.00 V, max = +15.94 V)
M/B Temp: +30.0°C (low = -127.0°C, high = +127.0°C)Out of these, only one label may be used directly:
Attempting to use other labels (like Vcore or +12V) will not work.
To find out the actual sensor name, which can be used by Zabbix to retrieve the sensor readings, run sensors -u. In the output, the following may be observed:
$ sensors -u
...
Vcore:
in1_input: 1.15
in1_min: 0.00
in1_max: 2.99
in1_alarm: 0.00
...
+12V:
in4_input: 13.00
in4_min: 0.00
in4_max: 15.94
in4_alarm: 0.00
...So Vcore should be queried as in1, and +12V should be queried as in4.2
Not only voltage (in), but also current (curr), temperature (temp) and fan speed (fan) readings can be retrieved by Zabbix.
According to specification these are voltages on chip pins and generally speaking may need scaling.↩︎