Our titanium coils, sheets, strip, plates, bars, rounds, squares, hexagon tubing and pipes are consistent with EN, DIN, ASTM, AMS and Mill Standards.
Standard | Available Material | Size |
ASME / ASTM SB/B338, B337, B861, B862 AMS 4943, 4944, 4945 |
GR.1, GR.2, GR.3, GR.4, GR.7, GR.9, GR.12 | 1~114 x 0.3~8 x 18000mm max. |
Tubes are subject to 100% ultrasonic testing, flatten & flaring test |
Produce standard | Available Material | Size |
ASTM B348, B381, F67, F136, Mil-T 9047 AMS4928, 4919 |
GR.1, GR.2, GR.3, GR.4, GR.5, GR.9, GR.12, 6A1-4V Eli, Ti-6-2-4-2 | Dia 5~300 x 6000mm max. |
Bars are subject to 100% ultrasonic testing as per AMS2631 ClassA1, Class B |
Produce standard | Available Material | Size | |||
ASME / ASTMSB / B265 / F136 / AMS4911, 4919, Mil-T-9046 | GR.1, GR.2, GR.3, GR.4, GR.5, GR.7, GR.9, GR.12, Ti-6242 | Cold rolled sheet: 0.4~5 x 1000 max x 2400mm max | Hot rolled plate: 5~80 x 3000 max x 6000mm max | Cold rolled coil: 0.4~3 x 1350 x coil, coil weight: 3~5 mt | Hot rolled coil: 3~12 x 1500 x coil |
Standard | Available Material | Size | |
ASTM B348, B381 AMS4928 | GR.1, GR.2, GR.3, GR.4, GR.5, GR.7, GR.12, 6Al-4V Eli | Disk: High 35~110mm x OD150~700mm | Ring: High 10~700mm x OD50~3000mm x ID30~2900mm |
Standard | Available Material | Size |
AWS A5, 16, AMS ISO5832 | GR.1, GR.2, GR.3, GR.4, GR.5, GR.7, GR.9, GR.12, GR23 | Dia. 0.05~7.0mm x coil |
Available Material | Size |
GR.1, GR.2, GR.5, GR.7, GR.9, GR.12 | Dia. to 650mm |
Inconel Alloy | Incoloy Alloy | Monel Alloy |
Inconel 600, Inconel 625 | Incoloy 800, Incoloy 800H, Incoloy 825, Incoloy 925 | Monel 400, Monel K-500 |
Titanium is widely used due to the fact that it has a number of advantages compared to other metals:
1. Low-density
2. Corrosion-resistant
3. High strength to weight ratio
4. Good high-temperature properties
5. Melting point of roughly 3,032°F (1,667°C)
6. High specific strength
7. Low elasticity modulus
8. Good workability
9. Singular biocompatibility
10. Good capability for decoration and a very good image
CP-Titanium and Titanium alloys have been proven to be technologically superior and cost-effective materials, in a wide variety of applications.
The classification is as follows:
ALPHA group Grade 1, 2, 3, 7, 11
ALPHA-BETA group Grade 5, 9, 12, 23
BETA group Grade 19, 2
The largest user of titanium products is the aerospace industry, but there is a wide range of other industries to see titanium as an important material.
- Condensers for power plant
- Heat exchangers
- Desalination
- Chemical processing
- Ti -Anodes
- Architectural material (roofing, ceiling, exterior wall panels)
- Flue gas desulfurization systems
- Wastewater treatment
- Pulp and paper industry
- Medical & Surgical implants
- Aircraft industry
- Automotive industry ( parts & exhaust tube)
- Watches/Jewellery, Architecture