WebXR Depth Sensing Module

1. Introduction

1.1. Terminology

This document uses the acronyms AR to signify Augmented Reality, and VR to signify Virtual Reality.

This document uses terms like "depth buffer", "depth buffer data" and "depth data" interchangably when referring to an array of bytes containing depth information, either returned by the XR device, or returned by the API itself. More information about the specific contents of the depth buffer can be found in data and texture entries of the specification.

This document uses the term normalized view coordinates when referring to a coordinate system that has an origin in the top left corner of the view, with X axis growing to the right, and Y axis growing downward.

2. Initialization

2.1. Feature descriptor

The applications can request that depth sensing be enabled on an XRSession by passing an appropriate feature descriptor. This module introduces new string - depth-sensing, as a new valid feature descriptor for depth sensing feature.

A device is capable of supporting the depth sensing feature if the device exposes native depth sensing capability. The inline XR device MUST NOT be treated as capable of supporting the depth sensing feature.

The depth sensing feature is subject to feature policy and requires "xr-spatial-tracking" policy to be allowed on the requesting document’s origin.

2.2. Intended data usage and data formats

enum XRDepthUsage {
  "cpu-optimized",
  "gpu-optimized",
};

• An usage of "cpu-optimized" indicates that the depth data is intended to be used on the CPU, by interacting with XRCPUDepthInformation interface.

• An usage of "gpu-optimized" indicates that the depth data is intended to be used on the GPU, by interacting with XRWebGLDepthInformation interface.

enum XRDepthDataFormat {
  "luminance-alpha",
  "float32",
  "unsigned-short",
};

• A data format of "luminance-alpha" or "unsigned-short" indicates that items in the depth data buffers obtained from the API are 16 bit unsigned integer values.

• A data format "float32" indicates that items in the depth data buffers obtained from the API are 32 bit floating point values.

The following table summarizes the ways various data formats can be consumed:

2.3. Session configuration

dictionary XRDepthStateInit {
  required sequence<XRDepthUsage> usagePreference;
  required sequence<XRDepthDataFormat> dataFormatPreference;
};

The usagePreference is an ordered sequence of XRDepthUsages, used to describe the desired depth sensing usage for the session.

The dataFormatPreference is an ordered sequence of XRDepthDataFormats, used to describe the desired depth sensing data format for the session.

The XRSessionInit dictionary is expanded by adding new depthSensing key. The key is optional in XRSessionInit, but it MUST be provided when depth-sensing is included in either requiredFeatures or optionalFeatures.

partial dictionary XRSessionInit {
  XRDepthStateInit depthSensing;
};

If the depth sensing feature is a required feature but the application did not supply a depthSensing key, the user agent MUST treat this as an unresolved required feature and reject the requestSession(mode, options) promise with a NotSupportedError. If it was requested as an optional feature, the user agent MUST ignore the feature request and not enable depth sensing on the newly created session.

if the depth sensing feature is a required feature but the result of finding supported configuration combination algorithm invoked with usagePreference and dataFormatPreference is null, the user agent MUST treat this as an unresolved required feature and reject the requestSession(mode, options) promise with a NotSupportedError. If it was requested as an optional feature, the user agent MUST ignore the feature request and not enable depth sensing on the newly created session.

When an XRSession is created with depth sensing enabled, the depthUsage and depthDataFormat attributes MUST be set to the result of finding supported configuration combination algorithm invoked with usagePreference and dataFormatPreference.

Note: user agents are not required to support all existing combinations of usages and data formats. This is intended to allow them to provide data in an efficient way, and depends on the underlying platforms. This decision places additional burden on the application developers - it could be mitigated by creation of libraries hiding the API complexity, possibly sacrificing performance.

The user agent that is capable of supporting the depth sensing API MUST support at least one XRDepthUsage mode. The user agent that is capable of supporting the depth sensing API MUST support "luminance-alpha" data format, and MAY support other formats.

const session = await navigator.xr.requestSession("immersive-ar", {
  requiredFeatures: ["depth-sensing"],
  depthSensing: {
    usagePreference: ["cpu-optimized", "gpu-optimized"],
    dataFormatPreference: ["luminance-alpha", "float32"],
  },
});

partial interface XRSession {
  readonly attribute XRDepthUsage depthUsage;
  readonly attribute XRDepthDataFormat depthDataFormat;
};

The depthUsage describes depth sensing usage with which the session was configured. If this attribute is accessed on a session that does not have depth sensing enabled, the user agent MUST throw an InvalidStateError.

The depthDataFormat describes depth sensing data format with which the session was configured. If this attribute is accessed on a session that does not have depth sensing enabled, the user agent MUST throw an InvalidStateError.

3. Obtaining depth data

3.1. XRDepthInformation

[SecureContext, Exposed=Window]
interface XRDepthInformation {
  readonly attribute unsigned long width;
  readonly attribute unsigned long height;

  [SameObject] readonly attribute XRRigidTransform normDepthBufferFromNormView;
  readonly attribute float rawValueToMeters;
};

The width attribute contains width of the depth buffer (i.e. number of columns).

The height attribute contains height of the depth buffer (i.e. number of rows).

The normDepthBufferFromNormView attribute contains a XRRigidTransform that needs to be applied when indexing into the depth buffer. The transformation that the matrix represents changes the coordinate system from normalized view coordinates to normalized depth buffer coordinates that can then be scaled by depth buffer’s width and height to obtain the absolute depth buffer coordinates.

Note: if the applications intend to use the resulting depth buffer for texturing a mesh, care must be taken to ensure that the texture coordinates of the mesh vertices are expressed in normalized view coordinates, or that the appropriate coordniate system change is peformed in a shader.

The rawValueToMeters attribute contains the scale factor by which the raw depth values from a depth buffer must be multiplied in order to get the depth in meters.

Each XRDepthInformation has an associated view that stores XRView from which the depth information instance was created.

Each XRDepthInformation has an associated depth buffer that contains depth buffer data. Different XRDepthInformations may store objects of different concrete types in the depth buffer.

3.2. XRCPUDepthInformation

[Exposed=Window]
interface XRCPUDepthInformation : XRDepthInformation {
  [SameObject] readonly attribute ArrayBuffer data;

  float getDepthInMeters(float x, float y);
};

The data attribute contains depth buffer information in raw format, suitable for uploading to a WebGL texture if needed. The data is stored in row-major format, without padding, with each entry corresponding to distance from the view's near plane to the users' environment, in unspecified units. The size of each data entry and the type is determined by depthDataFormat. The values can be converted from unspecified units to meters by multiplying them by rawValueToMeters. The normDepthBufferFromNormView can be used to transform from normalized view coordinates into depth buffer’s coordinate system. When accessed, the algorithm to access the depth buffer MUST be run.

Note: Applications SHOULD NOT attempt to change the contents of data array as this can lead to incorrect results returned by the getDepthInMeters(x, y) method.

The getDepthInMeters(x, y) method can be used to obtain depth at coordinates. When invoked, the algorithm to access the depth buffer MUST be run.

partial interface XRFrame {
  XRCPUDepthInformation? getDepthInformation(XRView view);
};

The getDepthInformation(view) method, when invoked on an XRFrame, signals that the application wants to obtain CPU depth information relevant for the frame.

const session = ...;          // Session created with depth sensing enabled.
const referenceSpace = ...;   // Reference space created from the session.

function requestAnimationFrameCallback(t, frame) {
  session.requestAnimationFrame(requestAnimationFrameCallback);

  const pose = frame.getViewerPose(referenceSpace);
  if (pose) {
    for (const view of pose.views) {
      const depthInformation = frame.getDepthInformation(view);
      if (depthInformation) {
        useCpuDepthInformation(view, depthInformation);
      }
    }
  }
}

function useCpuDepthInformation(view, depthInformation) {
  const depthInMeters = depthInformation.getDepthInMeters(0.25, 0.75);
  console.log("Depth at normalized view coordinates (0.25, 0.75) is:",
    depthInMeters);
}

3.3. XRWebGLDepthInformation

[Exposed=Window]
interface XRWebGLDepthInformation : XRDepthInformation {
  [SameObject] readonly attribute WebGLTexture texture;

  readonly attribute XRTextureType textureType;
  readonly attribute unsigned long? imageIndex;
};

The texture attribute contains depth buffer information as an opaque texture. Each texel corresponds to distance from the view's near plane to the users' environment, in unspecified units. The size of each data entry and the type is determined by depthDataFormat. The values can be converted from unspecified units to meters by multiplying them by rawValueToMeters. The normDepthBufferFromNormView can be used to transform from normalized view coordinates into depth buffer’s coordinate system. When accessed, the algorithm to access the depth buffer of XRDepthInformation MUST be run.

The textureType attribute describes if the texture is of type TEXTURE_2D or TEXTURE_2D_ARRAY.

The imageIndex attribute returns the offset into the texture array. It MUST be defined when textureType is equal to TEXTURE_2D_ARRAY and MUST be undefined if it’s TEXTURE_2D.

partial interface XRWebGLBinding {
  XRWebGLDepthInformation? getDepthInformation(XRView view);
};

The getDepthInformation(view) method, when invoked on an XRWebGLBinding, signals that the application wants to obtain WebGL depth information relevant for the frame.

const session = ...;          // Session created with depth sensing enabled.
const referenceSpace = ...;   // Reference space created from the session.
const glBinding = ...;        // XRWebGLBinding created from the session.

function requestAnimationFrameCallback(t, frame) {
  session.requestAnimationFrame(requestAnimationFrameCallback);

  const pose = frame.getViewerPose(referenceSpace);
  if (pose) {
    for (const view of pose.views) {
      const depthInformation = glBinding.getDepthInformation(view);
      if (depthInformation) {
        useGpuDepthInformation(view, depthInformation);
      }
    }
  }
}

const gl = ...;             // GL context to use.
const shaderProgram = ...;  // Linked WebGLProgram.
const programInfo = {
  uniformLocations: {
    depthTexture: gl.getUniformLocation(shaderProgram, 'uDepthTexture'),
    uvTransform: gl.getUniformLocation(shaderProgram, 'uUvTransform'),
    rawValueToMeters: gl.getUniformLocation(shaderProgram, 'uRawValueToMeters'),
  }
};

function useGpuDepthInformation(view, depthInformation) {
  // ...

  gl.bindTexture(gl.TEXTURE_2D, depthInformation.texture);
  gl.activeTexture(gl.TEXTURE0);
  gl.uniform1i(programInfo.uniformLocations.depthTexture, 0);

  gl.uniformMatrix4fv(
    programInfo.uniformLocations.uvTransform, false,
    depthData.normDepthBufferFromNormView.matrix);

  gl.uniform1f(
    programInfo.uniformLocations.rawValueToMeters,
    depthData.rawValueToMeters);

  // ...
}

precision mediump float;

uniform sampler2D uDepthTexture;
uniform mat4 uUvTransform;
uniform float uRawValueToMeters;

varying vec2 vTexCoord;

float DepthGetMeters(in sampler2D depth_texture, in vec2 depth_uv) {
  // Depth is packed into the luminance and alpha components of its texture.
  // The texture is a normalized format, storing millimeters.
  vec2 packedDepth = texture2D(depth_texture, depth_uv).ra;
  return dot(packedDepth, vec2(255.0, 256.0 * 255.0)) * uRawValueToMeters;
}

void main(void) {
  vec2 texCoord = (uUvTransform * vec4(vTexCoord.xy, 0, 1)).xy;

  float depthInMeters = DepthGetMeters(uDepthTexture, texCoord);

  gl_FragColor = ...;
}

4. Interpreting the results

// depthInfo is of type XRCPUDepthInformation:
const depthInMeters = depthInfo.getDepthInMeters(x, y);

5. Native device concepts

5.1. Native depth sensing

6. Privacy & Security Considerations

Changes

Changes from the First Public Working Draft 31 August 2021

7. Acknowledgements

The following individuals have contributed to the design of the WebXR Depth Sensing specification: