How to connect Arduino and Simulink
Open-source vehicle and robotics simulator for research.
JSBSim bridge for PX4 SITL/HITL simulations
Aerospace 6-DoF Simulation Platform.
Scans a Profinet controller and adds all stations/devices to a Beckhoff TwinCAT Profinet IO Device (TF6270)
Framework for building an individual CI/CD pipeline geared towards embedded systems
This repository contains models for Hardware In Loop simulation in OpenModelica using Arduino.
This repo implements grid-forming inverters for islanded stability (droop technique) and grid-following inverters for precise power regulation (PQ control).
A Hardware-In-the-Loop (HIL) simulation example for the stm32h743 microcontroller. The chip is interfaced with Simulink running on a laptop via a serial link (UART). To demonstrate the HIL simulation capabilities, a case study is considered where a PID controller implemented on the chip is used to control a model of an aircraft in Simulink.
Archived: VILLASfpga has been integrated into the VILLASnode repo
Hybrid control system using LQR and hardware in loop
This repository contains control algorithms for managing a single-phase microgrid, along with a Virtual Hardware-in-the-Loop (VHIL) simulation using Typhoon HIL Control Center.
Add programmable cores and enable HIL testing
This repository contains the code for the following paper: S.S. Mehjabin, A. Tekeoglu, M. Younis, M. Ebrahimabadi, R. Chandran, T. Sookoor, N. Karimi, "A Networked System Dependability Validation Framework using Physical and Virtual Nodes", submitted to IEEE Access, August 16th, 2023 (under review)
This repository contains adaptive control algorithms for managing a single-phase microgrid, along with a Virtual Hardware-in-the-Loop (VHIL) simulation using Typhoon HIL Control Center.
Enable seamless bidirectional communication between TRNSYS and multiple PLCs with a communication middleware built on top of TRNSYS Type 3157 and streamline heat pump testing in Hardware-in-the-Loop (HiL) testbeds. Created and maintained as an UCEEB RP2 project.
Arduplane Firmware for HITL (Hardware in the loop) simulation using XPlane 10 and APM
An automation tool for Typhoon HIL simulations
Demo code for my talk "Testing the Boundaries" at SCALE 21x
This project includes simulation and C code for a three-phase NPC inverter control strategy.
Add a description, image, and links to the hardware-in-the-loop topic page so that developers can more easily learn about it.
To associate your repository with the hardware-in-the-loop topic, visit your repo's landing page and select "manage topics."