Construction is the process of creating and building infrastructure or a facility. It differs from manufacturing in that manufacturing typically involves mass production of similar items without a designated purchaser, while construction is typically done on location for a known client. Construction as an industry is six to nine percent of the gross domestic product of developed countries. Construction starts with planning, design, and financing and continues until the project is built and ready for use.
Isolated column footing | Shallow Foundations in construction #shorts
Foundation for a building can be broadly classified into two – Shallow foundation and Deep Foundation.
If the depth of the foundation is lower than its width, we call it a shallow foundation. The minimum depth of a shallow foundation is 800mm and the maximum depth is 3m. Shallow foundations are used in places where the soil condition is good and can easily bear the weight of the superstructure.
Shallow foundations can be broadly classified into two – Footings and Raft.
a footing is that part of the foundation under a wall, pillar or a column. The purpose of the footing is to distribute the weight of the building over a larger area.
There are different types of footings namely Spread Footing, Combined Footing and Strap Footing or Cantilever footing.
Isolated footings or Pad footings is a ...
published: 10 Jun 2022
Building Construction Process | step by step | with Rebar placement
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Structural Construction process. this video is very helpful for All who want to learn about Construction Work.
Our Facebook Page - https://www.facebook.com/Cadtutorialbd/?view_public_for=1937668236557287
So watch, shear, learn & subscribe for more update....
https://www.youtube.com/channel/UCvhcxq2urYJFpKEoleDraCg?sub_confirmation=1
(#Animation #Construction #Structural)
published: 18 Jun 2021
Construction of wind power base binding process
published: 29 Apr 2023
12 Steps of Construction
Once the construction drawings have been approved, the project will then be awarded to a contractor by the client through a consultant. The construction of the proposed project will begin. Check out the 12 Stages/Steps of construction.
Corrections:
*3:11 100mm instead of 10mm
Please Subscribe: https://www.youtube.com/c/TheStructuralWorld?sub_confirmation=1
===================================================================
Visit our website for related blogs:
https://www.thestructuralworld.com
LIKE us on FACEBOOK: https://www.facebook.com/thestructuralworld/
Follow us on Twitter: @the_structural
===================================================================
This presentation contains images that were used under a Creative Commons License. Click here to see the full list of image...
published: 16 Aug 2019
Integrated housing for easy construction process- Good tools and machinery make work easy
published: 16 May 2022
Learn About Construction with Wayne the Bulldozer & Jake the Skid Steer! | A DAY AT WORK
#asmr #bricklayingasmr #bricklaying #bricklayer #satisfying #brickwork l #pattersonconstruction
published: 01 Mar 2023
10 Biggest Megaprojects in The World
10 of the Biggest Megaprojects in The World
SUBSCRIBE: https://bit.ly/3obsVlo
► Music Licensed From SoundStripe/Envato Elements
For any and all copyright matters, please email me directly at [email protected]
Unless otherwise created by Underworld, licenses have been obtained for images/footage in the video from the following sources; https://pastebin.com/w3TAntts
Underworld is creating the best new educational videos about the lesser known stories from around the world. We post Top 5’s, Top 10’s, Caught on Camera and much more! Be sure to SUBSCRIBE to never miss an upload!
published: 07 Feb 2023
New Senate building construction continues
#OneNewsNow | Senator Alan Peter Cayetano says the construction of the new Senate building in Taguig City will push through despite a halt order.
Subscribe to One News PH here:
https://www.youtube.com/c/OneNewsPH
Find One News PH here: https://onenews.ph
Facebook: https://www.facebook.com/ONENewsPH/
Twitter: https://twitter.com/onenewsph
Viber: https://bit.ly/36uQLSo
Telegram: https://t.me/onenewsph
published: 13 Jun 2024
All House Framing EXPLAINED...In Just 12 MINUTES! (House Construction/Framing Members)
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
We consult with homeowners and property investors nationwide on a range of important home-related issues, including:
-Remodels and Renovations
-Water Damage
-Home Inspection Reports
-Estimate and Proposal Analysis
-Major Repairs
-Contractor Issues
Just book a consultation on our home page!
FOLLOW US ON INSTAGRAM:
https://www.instagram.com/thehonestcarpenter
FOLLOW US ON LINKEDIN:
https://www.linkedin.com/in/thehonestcarpenter
Check out our other house-related videos, too!:
CAN FROST TILT A HOUSE?:
https://youtu.be/s-dWZPB5X-w
WORST TERMITE DAMAGE I'VE SEEN:
https://youtu.be/ZvuEPVcLZcA
11 WORST ROT AREAS ON YOUR HOME:
https://youtu.be/uEHlR5WmqTQ
All House Framing EXPLAINED....
Foundation for a building can be broadly classified into two – Shallow foundation and Deep Foundation.
If the depth of the foundation is lower than its width, w...
Foundation for a building can be broadly classified into two – Shallow foundation and Deep Foundation.
If the depth of the foundation is lower than its width, we call it a shallow foundation. The minimum depth of a shallow foundation is 800mm and the maximum depth is 3m. Shallow foundations are used in places where the soil condition is good and can easily bear the weight of the superstructure.
Shallow foundations can be broadly classified into two – Footings and Raft.
a footing is that part of the foundation under a wall, pillar or a column. The purpose of the footing is to distribute the weight of the building over a larger area.
There are different types of footings namely Spread Footing, Combined Footing and Strap Footing or Cantilever footing.
Isolated footings or Pad footings is a type of Spread footing and are used to carry and spread concentrated loads as in the case of a column or a pillar. Isolated footings can have a square, rectangular or circular top. They can be Simple/Sloped/Stepped.
In this video, we see the construction of a square, sloped, isolated footing.
First a trench is made where the foundation has to be placed. A 10cm thick layer of concrete (PCC) is placed at the bottom of the trench. This is the bed slab to hold the steel together in place.
A mat for the footing base slab and a pedestal for the column are done in steel. Steelwork is then placed on top of the concrete according to the center line. The slope for the footing is created using concrete.
The trench is then filled with earth. Shutters are placed around the columns and concreting is done.
▶️ About Viya:
Viya is a leading construction contracting company, offering a host of services including turnkey construction of independent houses, commercial buildings, villa projects, and holiday homes in Kerala.
From roofing to flooring to interiors and all other construction needs, Viya is committed to providing you with quality workmanship, outstanding customer service, and expertise in residential and commercial construction management.
▶️ Get a FREE QUOTE
✔️ Call/Whatsapp - +91 8138 800 800
✔️ Contact Form - https://viyaconstructions.com/contact-us/
✔️ Email - [email protected]
▶️ Follow Us at Our Social Handles
✔️ https://www.facebook.com/viyaconstructions
✔️ https://www.instagram.com/viyacons/
✔️ https://in.pinterest.com/viyacons/
▶️ Construction Tips
✔️ https://viyaconstructions.com/construction-tips/
▶️ Credits
✔️ Audio : YouTube Audio Library
Foundation for a building can be broadly classified into two – Shallow foundation and Deep Foundation.
If the depth of the foundation is lower than its width, we call it a shallow foundation. The minimum depth of a shallow foundation is 800mm and the maximum depth is 3m. Shallow foundations are used in places where the soil condition is good and can easily bear the weight of the superstructure.
Shallow foundations can be broadly classified into two – Footings and Raft.
a footing is that part of the foundation under a wall, pillar or a column. The purpose of the footing is to distribute the weight of the building over a larger area.
There are different types of footings namely Spread Footing, Combined Footing and Strap Footing or Cantilever footing.
Isolated footings or Pad footings is a type of Spread footing and are used to carry and spread concentrated loads as in the case of a column or a pillar. Isolated footings can have a square, rectangular or circular top. They can be Simple/Sloped/Stepped.
In this video, we see the construction of a square, sloped, isolated footing.
First a trench is made where the foundation has to be placed. A 10cm thick layer of concrete (PCC) is placed at the bottom of the trench. This is the bed slab to hold the steel together in place.
A mat for the footing base slab and a pedestal for the column are done in steel. Steelwork is then placed on top of the concrete according to the center line. The slope for the footing is created using concrete.
The trench is then filled with earth. Shutters are placed around the columns and concreting is done.
▶️ About Viya:
Viya is a leading construction contracting company, offering a host of services including turnkey construction of independent houses, commercial buildings, villa projects, and holiday homes in Kerala.
From roofing to flooring to interiors and all other construction needs, Viya is committed to providing you with quality workmanship, outstanding customer service, and expertise in residential and commercial construction management.
▶️ Get a FREE QUOTE
✔️ Call/Whatsapp - +91 8138 800 800
✔️ Contact Form - https://viyaconstructions.com/contact-us/
✔️ Email - [email protected]
▶️ Follow Us at Our Social Handles
✔️ https://www.facebook.com/viyaconstructions
✔️ https://www.instagram.com/viyacons/
✔️ https://in.pinterest.com/viyacons/
▶️ Construction Tips
✔️ https://viyaconstructions.com/construction-tips/
▶️ Credits
✔️ Audio : YouTube Audio Library
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Structural Construction process. this video is very helpful for All who want t...
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Structural Construction process. this video is very helpful for All who want to learn about Construction Work.
Our Facebook Page - https://www.facebook.com/Cadtutorialbd/?view_public_for=1937668236557287
So watch, shear, learn & subscribe for more update....
https://www.youtube.com/channel/UCvhcxq2urYJFpKEoleDraCg?sub_confirmation=1
(#Animation #Construction #Structural)
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Structural Construction process. this video is very helpful for All who want to learn about Construction Work.
Our Facebook Page - https://www.facebook.com/Cadtutorialbd/?view_public_for=1937668236557287
So watch, shear, learn & subscribe for more update....
https://www.youtube.com/channel/UCvhcxq2urYJFpKEoleDraCg?sub_confirmation=1
(#Animation #Construction #Structural)
Once the construction drawings have been approved, the project will then be awarded to a contractor by the client through a consultant. The construction of the ...
Once the construction drawings have been approved, the project will then be awarded to a contractor by the client through a consultant. The construction of the proposed project will begin. Check out the 12 Stages/Steps of construction.
Corrections:
*3:11 100mm instead of 10mm
Please Subscribe: https://www.youtube.com/c/TheStructuralWorld?sub_confirmation=1
===================================================================
Visit our website for related blogs:
https://www.thestructuralworld.com
LIKE us on FACEBOOK: https://www.facebook.com/thestructuralworld/
Follow us on Twitter: @the_structural
===================================================================
This presentation contains images that were used under a Creative Commons License. Click here to see the full list of images and attributions:
https://link.attribute.to/cc/383706
This video has been made possible by Content Samurai
Check out the Free Trial: https://www.contentsamurai.com/c/Monico-cs-freetrial
Once the construction drawings have been approved, the project will then be awarded to a contractor by the client through a consultant. The construction of the proposed project will begin. Check out the 12 Stages/Steps of construction.
Corrections:
*3:11 100mm instead of 10mm
Please Subscribe: https://www.youtube.com/c/TheStructuralWorld?sub_confirmation=1
===================================================================
Visit our website for related blogs:
https://www.thestructuralworld.com
LIKE us on FACEBOOK: https://www.facebook.com/thestructuralworld/
Follow us on Twitter: @the_structural
===================================================================
This presentation contains images that were used under a Creative Commons License. Click here to see the full list of images and attributions:
https://link.attribute.to/cc/383706
This video has been made possible by Content Samurai
Check out the Free Trial: https://www.contentsamurai.com/c/Monico-cs-freetrial
Wayne the Bulldozer and trainee Jake the Skid Steer are on a mission to build a new school! Before they build they clean and grade the ground, then pour the fo...
10 of the Biggest Megaprojects in The World
SUBSCRIBE: https://bit.ly/3obsVlo
► Music Licensed From SoundStripe/Envato Elements
For any and all copyright matt...
10 of the Biggest Megaprojects in The World
SUBSCRIBE: https://bit.ly/3obsVlo
► Music Licensed From SoundStripe/Envato Elements
For any and all copyright matters, please email me directly at [email protected]
Unless otherwise created by Underworld, licenses have been obtained for images/footage in the video from the following sources; https://pastebin.com/w3TAntts
Underworld is creating the best new educational videos about the lesser known stories from around the world. We post Top 5’s, Top 10’s, Caught on Camera and much more! Be sure to SUBSCRIBE to never miss an upload!
10 of the Biggest Megaprojects in The World
SUBSCRIBE: https://bit.ly/3obsVlo
► Music Licensed From SoundStripe/Envato Elements
For any and all copyright matters, please email me directly at [email protected]
Unless otherwise created by Underworld, licenses have been obtained for images/footage in the video from the following sources; https://pastebin.com/w3TAntts
Underworld is creating the best new educational videos about the lesser known stories from around the world. We post Top 5’s, Top 10’s, Caught on Camera and much more! Be sure to SUBSCRIBE to never miss an upload!
#OneNewsNow | Senator Alan Peter Cayetano says the construction of the new Senate building in Taguig City will push through despite a halt order.
Subscribe to...
#OneNewsNow | Senator Alan Peter Cayetano says the construction of the new Senate building in Taguig City will push through despite a halt order.
Subscribe to One News PH here:
https://www.youtube.com/c/OneNewsPH
Find One News PH here: https://onenews.ph
Facebook: https://www.facebook.com/ONENewsPH/
Twitter: https://twitter.com/onenewsph
Viber: https://bit.ly/36uQLSo
Telegram: https://t.me/onenewsph
#OneNewsNow | Senator Alan Peter Cayetano says the construction of the new Senate building in Taguig City will push through despite a halt order.
Subscribe to One News PH here:
https://www.youtube.com/c/OneNewsPH
Find One News PH here: https://onenews.ph
Facebook: https://www.facebook.com/ONENewsPH/
Twitter: https://twitter.com/onenewsph
Viber: https://bit.ly/36uQLSo
Telegram: https://t.me/onenewsph
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
We consult with homeowners and property investor...
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
We consult with homeowners and property investors nationwide on a range of important home-related issues, including:
-Remodels and Renovations
-Water Damage
-Home Inspection Reports
-Estimate and Proposal Analysis
-Major Repairs
-Contractor Issues
Just book a consultation on our home page!
FOLLOW US ON INSTAGRAM:
https://www.instagram.com/thehonestcarpenter
FOLLOW US ON LINKEDIN:
https://www.linkedin.com/in/thehonestcarpenter
Check out our other house-related videos, too!:
CAN FROST TILT A HOUSE?:
https://youtu.be/s-dWZPB5X-w
WORST TERMITE DAMAGE I'VE SEEN:
https://youtu.be/ZvuEPVcLZcA
11 WORST ROT AREAS ON YOUR HOME:
https://youtu.be/uEHlR5WmqTQ
All House Framing EXPLAINED...In Just 12 MINUTES! (House Construction/Framing Members)
Most people know that we call the assembled wooden structure of our houses "FRAMING." But, most people's knowledge of framing stops right there. This short video from The Honest Carpenter will explain what every major piece of framing in your house is called, how it works, and when it's installed!
Nearly every remodel, renovation and addition will involve new framing. And major repairs will also include a great deal of new framing. So it's very important to understand these terms so you'll know what your contractor is telling you!
Foundation--This is the bottom level of our houses, typically constructed by masons in the form of brick and block foundations, or poured concrete foundations.
Mud Sill / Sill / Sill Plate--This piece of framing sits directly on the masonry foundation. It is made of treated lumber, so it will resist rot while in contact with damp masonry. It runs the entire perimeter of the house.
Joists--These are the framing members that create our floors and ceilings. They are made of dimensional lumber, like 2x10s, or possibly I-Joists or Floor Trusses. The first level of joists sit directly on the mud sill.
Girders and Beams--These are stronger horizontal structural members that carry the weight of several joists or trusses.
Columns and Posts--These are strong vertical framing members that bear the combined weight of girders and beams, as well as joists, and transfer it to a safe point down in the foundation, or a lower part of the structure. You also see them beneath decks, and porch roofs
Sub-Floor--This is a layer of tongue-and-groove strand board or plywood that lays across the joists, creating a continuous surface to walk on and build more structure upon. It extends right out to the very edge of the structure.
Studs--This is a catch-all term for framing members stood on end to create the vertical structure of our homes. Studs are typically in the 2x4 or 2x6 dimensions. They are staggered 16" or 24" center to center.
Plates--These are the horizontal pieces of lumber that studs connect to at their ends. They turn the whole wall into a rigid structure that can be lifted into place. There is usually a single plate at the bottom of the wall, and a double top plate.
Doors and Windows receive special framing, because they create a hollow space in the wall for doors and windows to sit in.
Headers--These are the pieces of wider framing, turned on end and facing outward, that carry the weight over doors and windws.
Jack Stud/Trimmer Stud--These sit directly beneath the ends of the header, supporting it from below.
King Stud--These sit just outside of the header and jack stud, and extend to the top plate.
Cripple Studs--These small framing members fill hollow spaces above door headers, or below windows. They create a continuous wall surface.
Rough Sill/Rough Opening--What we call the entire open space for a door or window to sit in.
Blocking/Nogging--Small horizontal pieces of framing between studs. They may prevent tall walls from bowing, provide a fireblock, or create support from fixtures.
Staircases--These used to be made of notched stringers, but are now often ordered as pre-assembled units.
Rafters--Framing that creates our roof; they act like diagonal joists.
Ridge Board/Ridge Beam--The tall board sandwiched between rafter peaks
Hip Rafter/Valley Rafter--The rafters that create diagonal inside corners or outside corners of a roof.
Rafter Tails--The overhanging ends of the rafters (often tied together with a Sub-Fascia)
Jack Rafters--Extend from the ridge to a hip or valley rafter
Common Rafters--Extend all the way to the Ridge Board.
Trusses--Pre-fabricated units that create the structure and shape of a roof. They are made form shorter, skinner pieces, and pinned together with spiky metal plates.
Sheathing--The plywood or strand board layer that wraps all the framing on the house exterior, creating a wall surface and providing stability.
Thanks for watching!
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
We consult with homeowners and property investors nationwide on a range of important home-related issues, including:
-Remodels and Renovations
-Water Damage
-Home Inspection Reports
-Estimate and Proposal Analysis
-Major Repairs
-Contractor Issues
Just book a consultation on our home page!
FOLLOW US ON INSTAGRAM:
https://www.instagram.com/thehonestcarpenter
FOLLOW US ON LINKEDIN:
https://www.linkedin.com/in/thehonestcarpenter
Check out our other house-related videos, too!:
CAN FROST TILT A HOUSE?:
https://youtu.be/s-dWZPB5X-w
WORST TERMITE DAMAGE I'VE SEEN:
https://youtu.be/ZvuEPVcLZcA
11 WORST ROT AREAS ON YOUR HOME:
https://youtu.be/uEHlR5WmqTQ
All House Framing EXPLAINED...In Just 12 MINUTES! (House Construction/Framing Members)
Most people know that we call the assembled wooden structure of our houses "FRAMING." But, most people's knowledge of framing stops right there. This short video from The Honest Carpenter will explain what every major piece of framing in your house is called, how it works, and when it's installed!
Nearly every remodel, renovation and addition will involve new framing. And major repairs will also include a great deal of new framing. So it's very important to understand these terms so you'll know what your contractor is telling you!
Foundation--This is the bottom level of our houses, typically constructed by masons in the form of brick and block foundations, or poured concrete foundations.
Mud Sill / Sill / Sill Plate--This piece of framing sits directly on the masonry foundation. It is made of treated lumber, so it will resist rot while in contact with damp masonry. It runs the entire perimeter of the house.
Joists--These are the framing members that create our floors and ceilings. They are made of dimensional lumber, like 2x10s, or possibly I-Joists or Floor Trusses. The first level of joists sit directly on the mud sill.
Girders and Beams--These are stronger horizontal structural members that carry the weight of several joists or trusses.
Columns and Posts--These are strong vertical framing members that bear the combined weight of girders and beams, as well as joists, and transfer it to a safe point down in the foundation, or a lower part of the structure. You also see them beneath decks, and porch roofs
Sub-Floor--This is a layer of tongue-and-groove strand board or plywood that lays across the joists, creating a continuous surface to walk on and build more structure upon. It extends right out to the very edge of the structure.
Studs--This is a catch-all term for framing members stood on end to create the vertical structure of our homes. Studs are typically in the 2x4 or 2x6 dimensions. They are staggered 16" or 24" center to center.
Plates--These are the horizontal pieces of lumber that studs connect to at their ends. They turn the whole wall into a rigid structure that can be lifted into place. There is usually a single plate at the bottom of the wall, and a double top plate.
Doors and Windows receive special framing, because they create a hollow space in the wall for doors and windows to sit in.
Headers--These are the pieces of wider framing, turned on end and facing outward, that carry the weight over doors and windws.
Jack Stud/Trimmer Stud--These sit directly beneath the ends of the header, supporting it from below.
King Stud--These sit just outside of the header and jack stud, and extend to the top plate.
Cripple Studs--These small framing members fill hollow spaces above door headers, or below windows. They create a continuous wall surface.
Rough Sill/Rough Opening--What we call the entire open space for a door or window to sit in.
Blocking/Nogging--Small horizontal pieces of framing between studs. They may prevent tall walls from bowing, provide a fireblock, or create support from fixtures.
Staircases--These used to be made of notched stringers, but are now often ordered as pre-assembled units.
Rafters--Framing that creates our roof; they act like diagonal joists.
Ridge Board/Ridge Beam--The tall board sandwiched between rafter peaks
Hip Rafter/Valley Rafter--The rafters that create diagonal inside corners or outside corners of a roof.
Rafter Tails--The overhanging ends of the rafters (often tied together with a Sub-Fascia)
Jack Rafters--Extend from the ridge to a hip or valley rafter
Common Rafters--Extend all the way to the Ridge Board.
Trusses--Pre-fabricated units that create the structure and shape of a roof. They are made form shorter, skinner pieces, and pinned together with spiky metal plates.
Sheathing--The plywood or strand board layer that wraps all the framing on the house exterior, creating a wall surface and providing stability.
Thanks for watching!
Foundation for a building can be broadly classified into two – Shallow foundation and Deep Foundation.
If the depth of the foundation is lower than its width, we call it a shallow foundation. The minimum depth of a shallow foundation is 800mm and the maximum depth is 3m. Shallow foundations are used in places where the soil condition is good and can easily bear the weight of the superstructure.
Shallow foundations can be broadly classified into two – Footings and Raft.
a footing is that part of the foundation under a wall, pillar or a column. The purpose of the footing is to distribute the weight of the building over a larger area.
There are different types of footings namely Spread Footing, Combined Footing and Strap Footing or Cantilever footing.
Isolated footings or Pad footings is a type of Spread footing and are used to carry and spread concentrated loads as in the case of a column or a pillar. Isolated footings can have a square, rectangular or circular top. They can be Simple/Sloped/Stepped.
In this video, we see the construction of a square, sloped, isolated footing.
First a trench is made where the foundation has to be placed. A 10cm thick layer of concrete (PCC) is placed at the bottom of the trench. This is the bed slab to hold the steel together in place.
A mat for the footing base slab and a pedestal for the column are done in steel. Steelwork is then placed on top of the concrete according to the center line. The slope for the footing is created using concrete.
The trench is then filled with earth. Shutters are placed around the columns and concreting is done.
▶️ About Viya:
Viya is a leading construction contracting company, offering a host of services including turnkey construction of independent houses, commercial buildings, villa projects, and holiday homes in Kerala.
From roofing to flooring to interiors and all other construction needs, Viya is committed to providing you with quality workmanship, outstanding customer service, and expertise in residential and commercial construction management.
▶️ Get a FREE QUOTE
✔️ Call/Whatsapp - +91 8138 800 800
✔️ Contact Form - https://viyaconstructions.com/contact-us/
✔️ Email - [email protected]
▶️ Follow Us at Our Social Handles
✔️ https://www.facebook.com/viyaconstructions
✔️ https://www.instagram.com/viyacons/
✔️ https://in.pinterest.com/viyacons/
▶️ Construction Tips
✔️ https://viyaconstructions.com/construction-tips/
▶️ Credits
✔️ Audio : YouTube Audio Library
Hi i am Mahadi Hasan from "CAD TUTORIAL BD". Today i will show an Animation About Structural Construction process. this video is very helpful for All who want to learn about Construction Work.
Our Facebook Page - https://www.facebook.com/Cadtutorialbd/?view_public_for=1937668236557287
So watch, shear, learn & subscribe for more update....
https://www.youtube.com/channel/UCvhcxq2urYJFpKEoleDraCg?sub_confirmation=1
(#Animation #Construction #Structural)
Once the construction drawings have been approved, the project will then be awarded to a contractor by the client through a consultant. The construction of the proposed project will begin. Check out the 12 Stages/Steps of construction.
Corrections:
*3:11 100mm instead of 10mm
Please Subscribe: https://www.youtube.com/c/TheStructuralWorld?sub_confirmation=1
===================================================================
Visit our website for related blogs:
https://www.thestructuralworld.com
LIKE us on FACEBOOK: https://www.facebook.com/thestructuralworld/
Follow us on Twitter: @the_structural
===================================================================
This presentation contains images that were used under a Creative Commons License. Click here to see the full list of images and attributions:
https://link.attribute.to/cc/383706
This video has been made possible by Content Samurai
Check out the Free Trial: https://www.contentsamurai.com/c/Monico-cs-freetrial
10 of the Biggest Megaprojects in The World
SUBSCRIBE: https://bit.ly/3obsVlo
► Music Licensed From SoundStripe/Envato Elements
For any and all copyright matters, please email me directly at [email protected]
Unless otherwise created by Underworld, licenses have been obtained for images/footage in the video from the following sources; https://pastebin.com/w3TAntts
Underworld is creating the best new educational videos about the lesser known stories from around the world. We post Top 5’s, Top 10’s, Caught on Camera and much more! Be sure to SUBSCRIBE to never miss an upload!
#OneNewsNow | Senator Alan Peter Cayetano says the construction of the new Senate building in Taguig City will push through despite a halt order.
Subscribe to One News PH here:
https://www.youtube.com/c/OneNewsPH
Find One News PH here: https://onenews.ph
Facebook: https://www.facebook.com/ONENewsPH/
Twitter: https://twitter.com/onenewsph
Viber: https://bit.ly/36uQLSo
Telegram: https://t.me/onenewsph
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
We consult with homeowners and property investors nationwide on a range of important home-related issues, including:
-Remodels and Renovations
-Water Damage
-Home Inspection Reports
-Estimate and Proposal Analysis
-Major Repairs
-Contractor Issues
Just book a consultation on our home page!
FOLLOW US ON INSTAGRAM:
https://www.instagram.com/thehonestcarpenter
FOLLOW US ON LINKEDIN:
https://www.linkedin.com/in/thehonestcarpenter
Check out our other house-related videos, too!:
CAN FROST TILT A HOUSE?:
https://youtu.be/s-dWZPB5X-w
WORST TERMITE DAMAGE I'VE SEEN:
https://youtu.be/ZvuEPVcLZcA
11 WORST ROT AREAS ON YOUR HOME:
https://youtu.be/uEHlR5WmqTQ
All House Framing EXPLAINED...In Just 12 MINUTES! (House Construction/Framing Members)
Most people know that we call the assembled wooden structure of our houses "FRAMING." But, most people's knowledge of framing stops right there. This short video from The Honest Carpenter will explain what every major piece of framing in your house is called, how it works, and when it's installed!
Nearly every remodel, renovation and addition will involve new framing. And major repairs will also include a great deal of new framing. So it's very important to understand these terms so you'll know what your contractor is telling you!
Foundation--This is the bottom level of our houses, typically constructed by masons in the form of brick and block foundations, or poured concrete foundations.
Mud Sill / Sill / Sill Plate--This piece of framing sits directly on the masonry foundation. It is made of treated lumber, so it will resist rot while in contact with damp masonry. It runs the entire perimeter of the house.
Joists--These are the framing members that create our floors and ceilings. They are made of dimensional lumber, like 2x10s, or possibly I-Joists or Floor Trusses. The first level of joists sit directly on the mud sill.
Girders and Beams--These are stronger horizontal structural members that carry the weight of several joists or trusses.
Columns and Posts--These are strong vertical framing members that bear the combined weight of girders and beams, as well as joists, and transfer it to a safe point down in the foundation, or a lower part of the structure. You also see them beneath decks, and porch roofs
Sub-Floor--This is a layer of tongue-and-groove strand board or plywood that lays across the joists, creating a continuous surface to walk on and build more structure upon. It extends right out to the very edge of the structure.
Studs--This is a catch-all term for framing members stood on end to create the vertical structure of our homes. Studs are typically in the 2x4 or 2x6 dimensions. They are staggered 16" or 24" center to center.
Plates--These are the horizontal pieces of lumber that studs connect to at their ends. They turn the whole wall into a rigid structure that can be lifted into place. There is usually a single plate at the bottom of the wall, and a double top plate.
Doors and Windows receive special framing, because they create a hollow space in the wall for doors and windows to sit in.
Headers--These are the pieces of wider framing, turned on end and facing outward, that carry the weight over doors and windws.
Jack Stud/Trimmer Stud--These sit directly beneath the ends of the header, supporting it from below.
King Stud--These sit just outside of the header and jack stud, and extend to the top plate.
Cripple Studs--These small framing members fill hollow spaces above door headers, or below windows. They create a continuous wall surface.
Rough Sill/Rough Opening--What we call the entire open space for a door or window to sit in.
Blocking/Nogging--Small horizontal pieces of framing between studs. They may prevent tall walls from bowing, provide a fireblock, or create support from fixtures.
Staircases--These used to be made of notched stringers, but are now often ordered as pre-assembled units.
Rafters--Framing that creates our roof; they act like diagonal joists.
Ridge Board/Ridge Beam--The tall board sandwiched between rafter peaks
Hip Rafter/Valley Rafter--The rafters that create diagonal inside corners or outside corners of a roof.
Rafter Tails--The overhanging ends of the rafters (often tied together with a Sub-Fascia)
Jack Rafters--Extend from the ridge to a hip or valley rafter
Common Rafters--Extend all the way to the Ridge Board.
Trusses--Pre-fabricated units that create the structure and shape of a roof. They are made form shorter, skinner pieces, and pinned together with spiky metal plates.
Sheathing--The plywood or strand board layer that wraps all the framing on the house exterior, creating a wall surface and providing stability.
Thanks for watching!
Construction is the process of creating and building infrastructure or a facility. It differs from manufacturing in that manufacturing typically involves mass production of similar items without a designated purchaser, while construction is typically done on location for a known client. Construction as an industry is six to nine percent of the gross domestic product of developed countries. Construction starts with planning, design, and financing and continues until the project is built and ready for use.
The occupant "will be a large national sporting goods retailer for the whole building," said Glen Kitto, construction director for the property owner and project developer, ReserveDevelopment of Dallas, Texas.
Goodman said he expects construction on the first phase — a 29-unit residential building on a vacant part of the property — to start in the next couple of months with the hope to complete it by the end of the year.
Priorities include changing construction defect laws to make it easier for developers to build housing and cracking down on landlords who use rent-setting algorithms to artificially inflate prices.
HomeForward has purchased a 47-unit multifamily building in SoutheastPortland to provide permanent supportive housing to residents who are leaving chronic homelessness ... The building was completed in 2022.
Permits for the project were filed in late 2024, with construction expected to be completed by December 2025. The building permit was officially granted in January 2025, with inspections required at various stages of construction.
“Building these first-of-their-kind hybrid waterjet ferries allowed us to leverage our extensive experience in hybrid vessel construction and further solidify our position as a leader in this rapidly evolving field.”.
The government has shortlisted five engineering and construction firms to help build the Nottinghamshire plant by 2040, which it hopes will revitalise “a UK industrial heartland” by supporting new, skilled jobs in the area’s former coal communities.
New Delhi plans to build a 175-ship strong naval force by 2035 with an increasing emphasis on using domestically made components, but analysts say the pace of construction is slow as compared to ...
The NFSU report, which is in the possession of Hindustan Times, reveals that the building, originally sanctioned for only a ground floor and a first floor, had also a second floor constructed illegally.
Building looks into how Rosehaugh, Stanhope and Bovis managed to build the first two phases of the now redeveloped City estate so quickly ...Feature in Building, 11 July 1986 ... >> The construction of New York’sWoolworth Building, 1911-13.
Big 5 Construct Saudi builds on the industry’s strong momentum ... In the FirstWeek (15–18 February), the event will focus on heavy construction, concrete, HVAC and related sectors, under the theme of ‘Strong foundations from design to build’.
The work on the SSE building, new gang rest room, and construction services building has been completed and handed over to the railway Thiruvananthapuram divisional.
The ZBA voted to revoke the permit for the building’s construction, which had been stopped while that appeal was pending ... building’s construction, which had been stopped while the appeal was pending.
In recent years, the construction industry has witnessed a significant shift towards steel truss buildings ...Steel is an extremely recyclable material, and many steel truss buildings are constructed with recycled steel.
... for construction ... With ongoing research and development, the potential for even more efficient and resilient building techniques is on the horizon, promising a new era of construction excellence.