Accelerometer

1. Introduction

The Accelerometer, LinearAccelerationSensor and GravitySensor APIs extends the Generic Sensor API [GENERIC-SENSOR] interface to provide information about acceleration applied to device’s X, Y and Z axis in local coordinate system defined by device.

2. Examples

let sensor = new Accelerometer();
sensor.start();

sensor.onreading = () => {
    console.log("Acceleration along X-axis: " + sensor.x);
    console.log("Acceleration along Y-axis: " + sensor.y);
    console.log("Acceleration along Z-axis: " + sensor.z);
}

sensor.onerror = event => console.log(event.error.name, event.error.message);

let sensor = new GravitySensor({frequency: 5, referenceFrame: "screen"});

sensor.onreading = () => {
  if (sensor.y >= 9.8) {
    console.log("Web page is perpendicular to the ground.");
  }
}

sensor.start();

const shakeThreshold = 25;

let sensor = new LinearAccelerationSensor({frequency: 60});

sensor.addEventListener('reading', () => {
  if (sensor.x > shakeThreshold) {
    console.log("Shake detected.");
  }
});

sensor.start();

3. Use Cases and Requirements

The use cases and requirements are listed in the Motion Sensors Explainer and Sensor use cases documents.

4. Security and Privacy Considerations

Sensor readings provided by inertial sensors, such as accelerometer, could be used by adversaries to exploit various security threats, for example, keylogging, location tracking, fingerprinting and user identifying.

Research papers published by security community, for instance, [KEYSTROKEDEFENSE], indicate that by throttling the frequency, risks of successful attacks are not fully eliminated, while throttling may greatly affect usefulness of a web application with legitimate reasons to use the sensors.

The [TOUCHSIGNATURES] and [ACCESSORY] research papers propose that implementations can provide visual indication when inertial sensors are in use and/or require explicit user consent to access sensor readings. These mitigation strategies complement the generic mitigations defined in the Generic Sensor API [GENERIC-SENSOR].

This specification defines an accelerometer reading quantization algorithm (called from the get value from latest reading operation) to mitigate sensor calibration fingerprinting [SENSORID] and attacks that rely on high precision sensor readings. The details of the quantization algorithm follow W3C Privacy Interest Group’s recommendation.

5. Permissions Policy integration

This specification utilizes the policy-controlled feature identified by the string "accelerometer" defined in [DEVICE-ORIENTATION].

6. Model

6.1. Accelerometer

The Accelerometer sensor type has the following associated data:

Extension sensor interface

Accelerometer

Sensor permission names

"accelerometer"

Sensor feature names

"accelerometer"

Permission revocation algorithm

Invoke the generic sensor permission revocation algorithm with "accelerometer".

Default sensor

The device’s main accelerometer sensor.

Virtual sensor type

"accelerometer"

A latest reading for a Sensor of Accelerometer sensor type includes three entries whose keys are "x", "y", "z" and whose values contain device’s acceleration about the corresponding axes.

The acceleration is the rate of change of velocity of a device with respect to time. Its unit is the metre per second squared (m/s²) [SI].

The frame of reference for the acceleration measurement must be inertial, such as, the device in free fall would provide 0 (m/s²) acceleration value for each axis.

The sign of the acceleration values must be according to the right-hand convention in a local coordinate system (see figure below).

6.2. Linear Acceleration Sensor

The Linear Acceleration Sensor sensor type has the following associated data:

Extension sensor interface

LinearAccelerationSensor

Sensor permission names

"accelerometer"

Sensor feature names

"accelerometer"

Permission revocation algorithm

Invoke the generic sensor permission revocation algorithm with "accelerometer".

Virtual sensor type

"linear-acceleration"

A latest reading for a Sensor of Linear Acceleration Sensor sensor type includes three entries whose keys are "x", "y", "z" and whose values contain device’s linear acceleration about the corresponding axes.

The linear acceleration is an acceleration that is applied to the device that hosts the sensor, without the contribution of a gravity force.

Note: The relationship between gravity and linear acceleration is discussed in Motion Sensors Explainer § gravity-and-linear-acceleration.

6.3. Gravity Sensor

The Gravity Sensor sensor type has the following associated data:

Extension sensor interface

GravitySensor

Sensor permission names

"accelerometer"

Sensor feature names

"accelerometer"

Permission revocation algorithm

Invoke the generic sensor permission revocation algorithm with "accelerometer".

Virtual sensor type

"gravity"

A latest reading for a Sensor of Gravity Sensor sensor type includes three entries whose keys are "x", "y", "z" and whose values contain the acceleration due to gravity about the corresponding axes.

The gravity is the component of the device’s acceleration that prevents its velocity from increasing toward nearby masses. Devices in free fall for more than a short period of time may compute incorrect values for the gravity.

Note: The relationship between gravity and linear acceleration is discussed in Motion Sensors Explainer § gravity-and-linear-acceleration.

6.4. Reference Frame

The local coordinate system represents the reference frame for the Accelerometer, LinearAccelerationSensor, and the GravitySensor readings. It can be either the device coordinate system or the screen coordinate system.

The device coordinate system is defined as a three dimensional Cartesian coordinate system (x, y, z), which is bound to the physical device. For devices with a display, the origin of the device coordinate system is the center of the device display. If the device is held in its default position, the Y-axis points towards the top of the display, the X-axis points towards the right of the display and Z-axis is the vector product of X and Y axes and it points outwards from the display, and towards the viewer. The device coordinate system remains stationary regardless of the dom screen orientation (see figure below).

The screen coordinate system is defined as a three dimensional Cartesian coordinate system (x, y, z), which is bound to the dom screen. The origin of the screen coordinate system in the center of the dom screen. The Y-axis always points towards the top of the dom screen, the X-axis points towards the right of the dom screen and Z-axis is the vector product of X and Y axes and it and it points outwards from the dom screen, and towards the viewer (see figure below).

The main difference between the device coordinate system and the screen coordinate system, is that the screen coordinate system always follows the dom screen orientation, i.e. it will swap X and Y axes in relation to the device if the current orientation type changes. In contrast, the device coordinate system will always remain stationary relative to the device.

7. API

7.1. The Accelerometer Interface

[SecureContext, Exposed=Window]
interface Accelerometer : Sensor {
  constructor(optional AccelerometerSensorOptions options = {});
  readonly attribute double? x;
  readonly attribute double? y;
  readonly attribute double? z;
};

enum AccelerometerLocalCoordinateSystem { "device", "screen" };

dictionary AccelerometerSensorOptions : SensorOptions {
  AccelerometerLocalCoordinateSystem referenceFrame = "device";
};

Supported sensor options for Accelerometer are "frequency" and "referenceFrame".

7.1.1. Accelerometer.x

The x attribute of the Accelerometer interface returns the result of invoking get value from latest reading with this and "x" as arguments. It represents the acceleration along x-axis.

7.1.2. Accelerometer.y

The y attribute of the Accelerometer interface returns the result of invoking get value from latest reading with this and "y" as arguments. It represents the acceleration along y-axis.

7.1.3. Accelerometer.z

The z attribute of the Accelerometer interface returns the result of invoking get value from latest reading with this and "z" as arguments. It represents the acceleration along z-axis.

7.2. The LinearAccelerationSensor Interface

[SecureContext, Exposed=Window]
interface LinearAccelerationSensor : Accelerometer {
  constructor(optional AccelerometerSensorOptions options = {});
};

Supported sensor options for LinearAccelerationSensor are "frequency" and "referenceFrame".

7.2.1. LinearAccelerationSensor.x

The x attribute of the LinearAccelerationSensor interface returns the result of invoking get value from latest reading with this and "x" as arguments. It represents the linear acceleration along x-axis.

7.2.2. LinearAccelerationSensor.y

The y attribute of the LinearAccelerationSensor interface returns the result of invoking get value from latest reading with this and "y" as arguments. It represents the linear acceleration along y-axis.

7.2.3. LinearAccelerationSensor.z

The z attribute of the LinearAccelerationSensor interface returns the result of invoking get value from latest reading with this and "z" as arguments. It represents the linear acceleration along z-axis.

7.3. The GravitySensor Interface

[SecureContext, Exposed=Window]
interface GravitySensor : Accelerometer {
  constructor(optional AccelerometerSensorOptions options = {});
};

Supported sensor options for GravitySensor are "frequency" and "referenceFrame".

7.3.1. GravitySensor.x

The x attribute of the GravitySensor interface returns the result of invoking get value from latest reading with this and "x" as arguments. It represents the effect of acceleration along x-axis due to gravity.

7.3.2. GravitySensor.y

The y attribute of the GravitySensor interface returns the result of invoking get value from latest reading with this and "y" as arguments. It represents the effect of acceleration along y-axis due to gravity.

7.3.3. GravitySensor.z

The z attribute of the GravitySensor interface returns the result of invoking get value from latest reading with this and "z" as arguments. It represents the effect of acceleration along z-axis due to gravity.

8. Abstract Operations

8.1. Construct an accelerometer object

8.2. Accelerometer reading quantization algorithm

The Accelerometer sensor type defines the following reading quantization algorithm:

9. Automation

This section extends Generic Sensor API § 9 Automation by providing Accelerometer-specific virtual sensor metadata. Some of the virtual sensor types used by this specification are defined in [DEVICE-ORIENTATION].

9.1. Accelerometer automation

The accelerometer virtual sensor type and its corresponding entry in the per-type virtual sensor metadata map are defined in Device Orientation and Motion § automation.

9.2. Linear Accelerometer automation

The linear-acceleration virtual sensor type and its corresponding entry in the per-type virtual sensor metadata map are defined in Device Orientation and Motion § automation.

9.3. Gravity automation

The per-type virtual sensor metadata map must have the following entry:

key

"gravity"

value

A virtual sensor metadata whose reading parsing algorithm is parse xyz reading.

10. Acknowledgements

Tobie Langel for the work on Generic Sensor API.

W3C Privacy Interest Group and Paul Jensen for the sensor calibration fingerprinting mitigation proposal and discussion.