Aqara Home for RU

eWeLink Smart Home

Connect Aqara Home for RU to eWeLink Smart Home and unlock powerful automations

Triggers (If this)

Wall Switch was turned on/off (for Single Rocker / Channel switch or module)

This trigger fires when the specified single rocker switch is turned on/off.

4-Channel Plug turned on or off

This trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.

Wireless Relay Controller was turned on/off (for 2 Channels )

This trigger fires when the specified Wireless Relay Controller is turned on/off.

3-Channel Plug turned on or off

This trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.

Hub light / bulb was turned on/off

This trigger fires when the specified light is turned on/off.

2-Channel Plug turned on or off

This trigger fires when your eWeLink 2-Channel Plug is turned on or off.

Plug was turned on/off

This trigger fires when the specified plug is turned on/off.

1-Channel Plug turned on or off

This trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.

Leak is detected

This trigger fires when water leak is detected.

4-Channel Switch turned on or off

This trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.

Tilt is detected

This trigger fires when the tilt is detected.

3-Channel Switch turned on or off

This trigger fires when your eWeLink 3-Channel Switch is turned on or off.

Motion is detected

This trigger fires when motion is detected.

2-Channel Switch turned on or off

This trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.

Cube was tapped twice

This trigger fires when the cube was tapped twice.

1-Channel Switch turned on or off

This trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.

Cube was triggered after one-minute inactivity

This trigger fires when the cube is triggered after one-minute inactivity.

Smart Dimmer turned on or off

This trigger fires when your eWeLink Support Smart Dimmer is turned on or off.

Humidity reaches up to

This trigger fires when the humidity reaches the specified value.

Brightness is above

This trigger fires when the brightness of selected dimmer is above threshold.

Cube was rotated

This trigger fires when the cube was rotated.

Brightness is below

This trigger fires when the brightness of selected dimmer is below threshold.

Click (for Wireless Double Rocker switches)

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

Door sensor is open or closed

This trigger fires when the state of selected door sensor is open or closed.

Camera detects motion

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

Temperature goes above or below

This trigger fires when the temperature of selected device goes above or below threshold.

Temperature reaches up to

This trigger fires when the temperature reaches the specified value.

Humidity goes above or below

This trigger fires when the humidity of selected device goes above or below threshold.

Fire is detected

This trigger fires when fire is detected.

Voltage goes above or below

This trigger fires when the voltage of selected device is above or below threshold.

Fire is disappeared

This trigger fires when fire is no detected.

Electric current goes above or below

This trigger fires when the electric current of the selected device goes above or below threshold.

Water recedes

This trigger fires when the water recedes.

Light turned on or off

This trigger fires when your light is turned on or off.

Click (for Wireless Single Rocker / Mini switch)

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

Light brightness goes above or below

This trigger fires when your light brightness goes above or below.

Door and window sensor is open

This trigger fires when the door and window sensor is open.

FanLight turned on or off

This trigger fires when the fan or the light of your FanLight is turned on or off

Humidity drops to

This trigger fires when the humidity drops to the specified value.

RF Bridge Alarm activated

This trigger fires when an alarm of your RF Bridge is activated.

Vibration is detected

This trigger fires when the vibration is detected.

When Camera detects a motion event

This Trigger fires every time the camera detects a motion event.

Motion is detected and brightness is above

This trigger fires when the motion is detected and brightness is above the specified value.

Low Water Level of Diffuser

This trigger fires when the water level of a diffuser is low.

Cube was shaken

This trigger fires when the cube was shaken.

Zigbee Motion Sensor

This trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.

Curtain is fully opened/closed

This trigger fires when the specified curtain is fully opened/closed.

Leak detected

This trigger fires when leak is detected from water leak sensor.

Camera detects sound

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

Zigbee door sensor is open or closed

This trigger fires when the status of a Zigbee door sensor is open or closed.

Door and window sensor is closed

This trigger fires when the door and window sensor is closed.

Zigbee Wireless Switch Pressed

This trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.

Temperature drops to

This trigger fires when the temperature drops to the specified value.

Electric curtain is open or closed

This trigger fires when the selected electric curtain is open or closed.

TVOC drops to

This trigger fires when the tvoc drops to the specified value.

Enabled/disabled Child Lock of Thermostat

This trigger fires when the child lock status changes (enabled/disabled).

Cube was pushed

This trigger fires when the cube was pushed.

Thermostat Mode changes

This trigger fires when the thermostat mode changes.

TVOC reaches up to

This trigger fires when the tvoc reaches the specified value.

Thermostat turned on or off

This trigger fires when the thermostat turns on or off

Cube was flipped

This trigger fires when the the cube was flipped

Color temperature(CT) of light appearances warm or cool

This trigger fires when your lightâ€™s color temperature of light apperances warm or cool white.

Natural gas is disappeared

This trigger fires when no natural gas is detected.

Light turns to a specified colour

This trigger fires when your lights to a specified colour .

Natural gas is detected

This trigger fires when natural gas is detected.

Scene Controller pressed

This Trigger fires every time your eWeLink Scene Controller is pressed.

Motion is detected and brightness is below

This trigger fires when the motion is detected and brightness is below the specified value.

Button Pressed

This Trigger fires every time your eWeLink Button is pressed.

Drop is detected

This trigger fires when the drop is detected.

Device/Group is turned on or off

This Trigger fires when the device/group is turn on or off

Low battery

The battery of the device is low

Various AQIs goes above or below

This trigger fires when the AQIs of selected devicegoes above or below threshold

Bell ringing was detected

This trigger fires when When Bell ringing is detected

Forcible demolition alarm detected

This trigger fires when Forcible demolition alarm detected

Recognize the specified face

This trigger fires when recognize the specified face

Recognize strange faces

This trigger fires when recognize strange faces

Somebody linger

This trigger fires when somebody is lingering at your doorstep

Cube flip to side 1

This trigger fires when the cube flip to side 1

Cube flip to side 2

This trigger fires when the cube flip to side 2

Cube flip to side 3

This trigger fires when the cube flip to side 3

Cube flip to side 4

This trigger fires when the cube flip to side 4

Cube flip to side 5

This trigger fires when the cube flip to side 5

Cube flip to side 6

This trigger fires when the cube flip to side 6

Zone detection

This trigger fires when an event is detected in the zone

Presence is detected

This trigger fires when Presence detected.

Absence is detected

This trigger fires when absence detected.

Pet detected

This trigger fires when when the camera detects pet.

Package detected

This trigger fires when when the camera detects package.

Unknown vehicle detected

This trigger fires when when the camera detects unknown vehicle.

Human detected

This trigger fires when when the camera detects human.

Recognize the specified vehicle

This trigger fires when when the camera recognize the specified vehicle.

The door is closed

this trigger fires when the door, gate, window is closed

The door is opened

this trigger fires when the door, gate, window is opened

Queries (With)

Current temperature

This query returns the current temperature.

Current power state

This query returns the on/off state of the device you choose.

Current humidity

This query returns current humidity.

Actions (Then that)

Turn 4-Channel Plug on or off

This action will turn your eWeLink Support 4-Channel Plug on or off.

Wake up / sleep camera

This action will wake up / sleep of the specified camera.

Turn 3-Channel Plug on or off

This action will turn your eWeLink Support 3-Channel Plug on or off.

Close the curtain

This action will close the curtain of your choosing.

Turn 2-Channel Plug on or off

This action will turn your eWeLink 2-Channel Plug on or off.

Enable / Disable sound detection

This action will enable / disable sound detection of the specified camera.

Turn 1-Channel Plug on or off

This action will turn your eWeLink Support 1-Channel Plug on or off.

Open the curtain to the designated position

This action will open the curtain of your choosing to the designated position.

Turn 4-Channel Switch on or off

This action will turn your eWeLink 4-Channel Switch on or off.

Turn on/off switch (for Single Rocker / Channel switch or module)

This action will turn on/off the single rocker switches or module of your choosing.

Turn 3-Channel Switch on or off

This action will turn your eWeLink Support 3-Channel Switch on or off.

Disable sound detection

This action will disable sound detection of the specified camera.

Turn 2-Channel Switch on or off

This action will turn your eWeLink Support 2-Channel Switch on or off.

Sleep camera

This action will sleep the specified camera.

Turn 1-Channel Switch on or off

This action will turn your eWeLink Support 1-Channel Switch on or off.

Turns on/off plug

This action will turn on/off the plug of your choosing.

Turn Smart Dimmer on or off

This action will turn your eWeLink Support smart dimmer on or off.

Wake up camera

This action will wake up the specified camera.

Set brightness for Smart Dimmer

This action will set brightness for selected eWeLink Support smart dimmer .

Open/close the curtain

This action will open/close the curtain of your choosing.

Set color for light

This action will set a color for selected light.

Open the curtain

This action will open the curtain of your choosing.

Set color temperature for light

This action will set a color temperature for selected light.

Stop the curtain

This action will stop the curtain of your choosing.

Set brightness for light

This action will set the brightness for selected light .

Enable / Disable motion detection

This action will enable / disable motion detection of the specified camera.

Turn on or off light

This action will turn your light on or off.

Turn on/off the hub light / bulb

This action will turn on/off the light of your choosing.

Press Remote Button on RF Bridge

This action will press selected remote button on your RF Bridge.

Turn on/off Wireless Relay Controller (for 2 Channels)

This action will turn on/off the wireless relay controller of your choosing.

Control FanLight

This action will turn on or turn off the fan or the light of your fanlight.

Disable motion detection

This action will disable motion detection of the specified camera.

Open or close electric curtain

This action will open or close your electric curtain.

Enable sound detection

This action will enable sound detection of the specified camera.

Turn on or turn off diffuser

This action will turn your diffuser on or off.

Enable motion detection

This action will enable motion detection of the specified camera.

Set percentage of electric curtain

This action will open selected curtain to the percentage you set.

Feeding for once

This action will make feeder feed once

Enable/disable the Child Lock of Thermostat

This action will enable or disable the child lock.

Set color

This action will set the color of the light

Change Thermostat Mode

This action will change the thermostat mode (Manual/Program).

Turn on/off the lamp (for 2 Channels)

This action will Turn on/off the light of your choosing.

Turn on or off Thermostat

This action will turn your eWeLink Thermostat on or off.

Run light scenario

This action will run the light scenario

Fanlight on-off and speed setting

This action will set the light on/off or the fan speed of fanlight.

Close the door

This action will close the door, gate, window of your choosing

Camera makes alarm

This Action will makes the camera sound an alarm.

Open the door

This action will open the door, gate, window of your choosing

Set temperature

This action will set to a target temperature

Turn on or off device/group

This action will turn your device/group turn on or off

Camera Action

This will cause the camera to perform the action you selected.

Make device sound an alarm or beep

This action will set the device to sound an alarm or beep.

Set the security mode

This action will set to a security mode or disarm.

IFTTT helps all your apps and devices work better together