Wi-Fi internet radio from a router with station switching capability

ChatGPT was not used in writing this article. The animated image uses the webp file format instead of gif.

In this article, you will find a complete description of how to make a Wi-Fi internet radio receiver from a router that can play mp3 streams from internet radio stations. It is also possible to switch between two internet radio stations. We will use OpenWRT firmware installed on the router to create a Wi-Fi internet radio. It is possible to complete this project without using a soldering iron. All the components can be placed inside the router to create a finished device — a Wi-Fi internet radio.

• Any router with a USB port that can be installed with OpenWRT, a Linux-based operating system designed for embedded systems. You can check if your router is compatible with OpenWRT on this page: https://openwrt.org/toh/start.
• A USB sound card that costs $1-$2.
• Any passive (or active) speakers.
• Two patch cords — twisted pair crimped with 8P8C connectors (also known as RJ-45).
• A personal computer.
• Ethernet and Wi-Fi internet connection (optional).

Connecting a router to the Internet

We need to connect a router that will act as a Wi-Fi internet radio receiver to the home network router using a patch cord. Connect one end of the patch cord to the router that will act as the Wi-Fi internet radio receiver, specifically to the «Internet» port. Connect the other end of the patch cord to any available LAN port on the home network router. Note that the last (rightmost) port on the router, when viewed from the side where the ports are located, is often reserved by the Internet service provider for IPTV and is not intended for internet access.

Connect a personal computer to the router that will act as the Wi-Fi internet radio using a second patch cord. Insert the plug into any available LAN port on the router.

Reflash a router

Check if there is an OpenWRT firmware version available for your router: https://openwrt.org/toh/start. You can do this by visiting the OpenWRT wiki page for your router model. For example, the TP-LINK TL-WR842N router has an OpenWRT firmware available.

Setting up OpenWRT

1) To connect to a router via ssh, type the following command in the console: (Windows users can use the ssh command or putty)

ssh [email protected]

opkg update

1. Access the web interface of OpenWRT.
2. Go to the top menu and navigate to Network -> Interfaces.
3. Click on the «Edit» button next to the WAN interface.
4. In the dialog box that appears, select the «Advanced Setting» tab.
5. Uncheck the box next to «Use DNS servers advertised by peer».
6. Enter the addresses of the Google and OpenDNS DNS servers.

2) Install all the packages needed for the USB sound card to work, including madplay, which, along with wget, will play the MP3 stream of an internet radio station. Use the following command:

opkg install kmod-sound-core kmod-usb-audio kmod-input-core kmod-input-evdev madplay alsa-utils triggerhappy kmod-hid kmod-usb-hid

opkg upgrade wget

3) If we want our router to connect to the Internet through the Wi-Fi home network instead of using Ethernet, we need to switch the Wi-Fi module of the router to client mode. This can be done in the web interface of OpenWRT, in the top menu section:

ping altavista.com

Connect USB sound card

Now, connect the USB sound card to the USB port of the router. Connect speakers to the output of the sound card. If necessary, if the speakers are active and powered by USB, connect them to the USB port to provide power to the speakers audio-frequency amplifier. You now have a Wi-Fi router with a connected USB sound card and active speakers.

Reboot the router

To reboot the router, enter the command

reboot

First time audio stream playback

To connect to the router via ssh, as we have done before, we can use the following command:

wget --no-check-certificate -q -O - https://mpc1.mediacp.eu:8404/stream | madplay - -Q --no-tty-control

Automatic connection to a stream when the router is turned on

In Linux, there is a file where you can add commands that will be executed during system startup. In OpenWRT and some other distributions, this file is called rc.local and it is located in the directory /etc:

/etc/rc.local

Reconnecting to audio stream after connection loss and switching between two stations

Switching between two stations is possible thanks to the presence of a file in OpenWRT that stores the brightness value of the LED responsible for indicating the connection of client devices to the LAN network. When we connect a computer to the router using an Ethernet cable, for example, to the LAN4 port, the fourth LED on the router panel will light up.
To utilize this feature, we can connect to the router via the console and navigate to the directory

cd /sys/devices/platform/leds/leds/router_model_name:lan/

cat /sys/devices/platform/leds/leds/router_model_name:lan/brightness

cd /sys/devices/platform/leds/leds/

ls

To connect the wires to the four LAN4 pins (two twisted pairs), we will connect these four wires to a switch (station switch in the «Wi-Fi Internet Radio Receiver in open view» image). The switch will toggle the TX (Transmit) pair with the RX (Receive) pair of the Wi-Fi router. The Wi-Fi router's LAN port will remain functional and can be used to connect external devices if the switch is open.

Let's write a bash script that we will place in the file /etc/rc.local, which will handle connecting to the audio stream, playback, reconnection in case of connection loss, and switching between two internet radio stations.

# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.

echo "#!/bin/sh" > /tmp/checkOnline
echo "if ( ! ping -c 8 8.8.8.8 > /dev/null 2>&1 ) ; then echo 'network down'; sh /tmp/killPlayer; else echo 'network up'; fi;" >> /tmp/checkOnline
echo "if ( ! pgrep -x madplay > /dev/null 2>&1 ) ; then echo 'player down'; sh /tmp/killPlayer; else echo 'player up'; fi" >> /tmp/checkOnline
chmod +x /tmp/checkOnline

echo "#!/bin/sh" > /tmp/killPlayer
echo "/usr/bin/killall -9 wget madplay;
sleep 1;
echo 'start playRadio';
sh /tmp/playRadio &" >> /tmp/killPlayer
chmod +x /tmp/killPlayer

echo "#!/bin/sh" > /tmp/switchRadioTimer
echo "while true
do
 STATE=\`cat /sys/devices/platform/leds/leds/tl-wr842n-v5:green:lan/brightness\`
 OLDSTATE=\`cat /etc/oldStationSwitchState\`
 if [ "\$STATE" != "\$OLDSTATE" ] ; then echo \$STATE > /etc/oldStationSwitchState; sh /tmp/killPlayer; fi;
 sleep 1
done" >> /tmp/switchRadioTimer
chmod +x /tmp/switchRadioTimer

echo "#!/bin/sh" > /tmp/playRadio
echo "OLDSTATE=\`cat /etc/oldStationSwitchState\`
URL='http://radio.m-1.fm/raduga/high'
if [[ \$OLDSTATE -gt 0 ]] ; then URL='http://i6.streams.ovh:16012/stream'; fi;
wget --no-check-certificate -q -O - \$URL | madplay - -Q --no-tty-control" >> /tmp/playRadio
chmod +x /tmp/playRadio

echo "#!/bin/sh" > /tmp/checkOnlineTimer
echo "while true
do
 sh /tmp/checkOnline
 sleep 20
done" >> /tmp/checkOnlineTimer
chmod +x /tmp/checkOnlineTimer

sleep 5; /tmp/playRadio &
sleep 5; /tmp/switchRadioTimer &
sleep 5; /tmp/checkOnlineTimer &

exit 0

In the directory /tmp, we create executable script files: checkOnline, killPlayer, switchRadioTimer, playRadio, and checkOnlineTimer.

checkOnline is a script that checks whether the Google DNS server is pingable and whether madplay is running. If at least one of these conditions is not met, killPlayer is executed.

killPlayer terminates the execution of madplay and runs the playRadio script.

playRadio reads the station number to be played from the text file /etc/oldStationSwitchState and plays either stream #1 or stream #2 depending on the value.

switchRadioTimer is a script that, in an infinite loop, checks the state of the LAN4 LED, which lights up when our station switch is closed. Then, the script compares the read switch state with the value stored in the /etc/oldStationSwitchState file. If they are different, the switch state value is saved in the /etc/oldStationSwitchState file, and killPlayer is called.

checkOnlineTimer checks whether madplay is running every 20 seconds using the checkOnline script.

All script files have been created. We will now run playRadio, switchRadioTimer, and checkOnlineTimer.

After saving /etc/rc.local, we need to create a file /etc/oldStationSwitchState with a zero value. This can be done in the OpenWRT console using the command

echo 0 > /etc/oldStationSwitchState

Wi-Fi internet radio receiver inside and outside

We will place the USB sound card, audio-frequency amplifier, volume controller, and switches inside the Wi-Fi router case. Then, we will mount the 3.5mm audio jack on the back panel:

Wi-Fi Internet Radio Receiver in open view.

Here is a Wi-Fi internet radio receiver in its assembled form:

Let's test how a Wi-Fi internet radio receiver works: