What's Changed

• More robust devicedata parsing by @vincentwolsink in #188

Full Changelog: 0.6.1...0.6.2

What's Changed

• Only read device_data for active devices by @vincentwolsink in #184

Full Changelog: 0.6.0...0.6.1

🚀 Due to a new discovered endpoint we have even more inverter/relay sensors available, also for home owner accounts! Big thanks to @krbaker

⚠️ Unfortunately with this release Home Assistant decides to recreate several sensors (with the same name) under a new ID, and mark the previous ones as unavailable. Probably the easiest fix is to remove your Envoy from the integration and re-add it (don't forget to correct any custom configuration you did). Otherwise you can remove all the unavailable sensors and rename the IDs of the new sensors back to the old one.

What's Changed

• Add enphase built, sunpower only micro inverters (IQ7HS) by @krbaker in #173
• Add more open per-inverter endpoint by @krbaker in #174
• Fully retire devstatus endpoint by @vincentwolsink in #175
• Add extra sensors for relays by @vincentwolsink in #176
• Add relay frequency, show only line voltage of connected lines by @vincentwolsink in #177
• Remove AC Current sensor, no correct readings by @vincentwolsink in #178
• Retain production values after communication with inverter is lost by @vincentwolsink in #180
• Revert "Remove AC Current sensor, no correct readings" by @vincentwolsink in #181

New Contributors

• @krbaker made their first contribution in #173

Full Changelog: 0.5.3...0.6.0

What's Changed

• Remove AC Current sensor, no correct readings by @vincentwolsink in #178
• Retain production values after communication with inverter is lost by @vincentwolsink in #180
• Revert "Remove AC Current sensor, no correct readings" by @vincentwolsink in #181

Full Changelog: 0.6.0-beta2...0.6.0-beta3

What's Changed

• Add relay frequency, show only line voltage of connected lines by @vincentwolsink in #177

Full Changelog: 0.6.0-beta1...0.6.0-beta2

🚀 Due to a new discovered endpoint we have even more inverter data available, also for home owner accounts. Big thanks to @krbaker!
⚠️ This release might recreate several sensors under a new ID and show the previous ones a unavailable.
ℹ️ The Relay Forced sensor is removed.

What's Changed

• Add enphase built, sunpower only micro inverters (IQ7HS) by @krbaker in #173
• Add more open per-inverter endpoint by @krbaker in #174
• Fully retire devstatus endpoint by @vincentwolsink in #175
• Add extra sensors for relays by @vincentwolsink in #176

New Contributors

• @krbaker made their first contribution in #173

Full Changelog: 0.5.3...0.6.0-beta1

What's Changed

• Improve endpoint data check to catch empty dicts/lists by @vincentwolsink in #172

Full Changelog: 0.5.2...0.5.3

What's Changed

• Disable cache on production_power and inventory endpoints by @vincentwolsink in #169

Full Changelog: 0.5.1...0.5.2

What's Changed

• Add firmware version sensors for all devices by @vincentwolsink in #168

Full Changelog: 0.5.0...0.5.1

What's Changed

• Add configuration option to correct lifetime production value by @vincentwolsink in #166

Full Changelog: 0.4.9...0.5.0