Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

BMP280 full function driver library for general MCU and Linux.

module for the BMP280 sensor

air quality sensor based on ESP32

BMP280 / BME280 driver STM32 HAL I2C

A platform agnostic Rust driver for the Bosch BM[PE]-280

Libraries for STM32 (STM32F103C8T6) on pure CMSIS.

Go·Hardware·Lean - Host drivers

Rocket flight recorder based on Raspberry Pi Zero W

ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

基于stm32-f4智能气象站及Wi-Fi开关，提供温度、气压、湿度及光强度测量、服务器上报，以及Wi-Fi控制下的GPIO口。Intelligent Weather Station and Wi-Fi switcher providing temperature ,atmosphere pressure ,humidity and lightness detecting and reporting .Also the control of GPIO in Wi-Fi.

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

Weather Display (7.5in eInk) with an ESP32, indoor sensors, receiving data from OpenWeatherMap.org

BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)

An all-in-one ESP8266 based weather station.

Erriez Arduino libraries

To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.

STM32 flight computer and FDR for high-power SRM rockets.