lbuild: a generic, modular code generator in Python 3

modm: a C++17 library generator for AVR and ARM Cortex-M devices

nextpnr portable FPGA place and route tool

Builds of the latest OpenOCD

Building and deploying container images for open source EDA

Documenting the Lattice ECP5 bit-stream format.

CANopen driver framework for ROS (http://wiki.ros.org/ros_canopen)

Webseite des TechAachen e.V.

The USRP™ Hardware Driver Repository

CANopen device implementation for modm

ulx3s ghdl examples

Collection of various ulx3s examples

Open source process design kit for usage with SkyWater Technology Foundry's 130nm node.

Shared resources for smoke testing electronic design automation (EDA) tooling

Blink an LED on an FPGA in VHDL using ghdl, yosys and nextpnr

Python for BitBanging SPI PROM on IceZero FPGA board from RaspPi GPIO pins

HDL part for Loa's FPGA(s).

"Backdoor Shell" a UNIX like shell for writing and reading 32bit registers in a FPGA/ASIC

VHDL synthesis (based on ghdl)

open-source logic analyzer for FPGAs

STM32 + FPGA

Sump: Raspberry Pi-based Sump Monitor

The OFS (Offline FileSystem or Ohm FileSystem) is a offline-layer which is (or should be) able to extend every filesystem with offline capabilities.