Display or change the monitor resolution, color depth, or refresh rate.
res_set [options] [resolution]
Options:
-w | --width x Set horizontal resolution to 'x' (min/max allowed)
-h | --height y Set vertical resolution to 'y' (min/max allowed)
-b | --bits bpp Set color depth (bits/pixel) to 'bpp' (min/max allowed)
-f | --frequency hz Set refresh frequency to 'hz' (min/max allowed)
-o | --orientation n Set display orientation to 'n' (0,90,180,270)
-x | --positionx n Set display x position to 'x'
-y | --positiony n Set display y position to 'y'
-e | --mode n Set display mode to 'n'
-m | --monitor n Set/get display settings for monitor number 'n'
-M | --monitor-name x Set/get display settings for monitor named 'x'
-i | --min Use minimum supported value for width/height/bits/freq
-a | --max Use maximum supported value for width/height/bits/freq
-q | --query Show current display settings and exit
-l | --list List available display modes
-L | --list-monitors List the names of the monitors
-Z | --raw List all graphics modes (CAUTION!)
Even those not supported by the current monitor
-c | --current Set/get current settings (not registry settings)
-s | --save Settings are permanently changed for the current user
-g | --global Settings are permanently changed for all users
-r | --reset Settings are changed, even if they are the same
-R | --no-reset Settings are stored, but will not take effect
-p | --primary Selected monitor will become the primary monitor
-T | --temporary Change is temporary in nature
-t | --test Tests if the requested graphics mode could be set
-v | --version Show version and copyright information and quit
-? | --help Show this help message and quit
res_set -l 21 & rem list the display modes
res_set -e 21 & rem set display to mode 21
res_set xga & rem set resolution to 1024 x 768, depth/refresh to minimum for this resolution
res_set -max xga & rem set resolution to 1024 x 768, depth/refresh to maximum for this resolution
res_set -w 800 -h 600 & rem set resolution to 800x600, depth/refresh to minimum for this resolution
res_set 800 600 & rem same as above
res_set -w 800 -h 600 -d 32 -r 60
res_set -max & rem use highest supported resolution/depth/refresh values available
res_set -max -f min & rem use highest supported resolution/depth but the lowest refresh rate
res_set -m 2 800 600 & rem set monitor 2's resolution to 800x600
res_set -m 2 -x 200 -y -600 800 600 & rem set monitor 2's resolution to 800x600, and position to 200,-600Also
--refresh alias for --frequency
--freq alias for --frequency
--bpp alias for --bits
--depth alias for --bits
-d alias for --bits
You can use / instead of - to preface single letter options, //width will not work.
Resolution can be entered as 'width height', or one of the following terms:
Term W H Description
------ ---- ---- -------------------------
CGA 320 200 CGA 4-color, Atari ST 16 color, Commodore 64 VIC-II Hires, Amiga OCS NTSC Lowres, Apple IIGS LoRes, MCGA
QVGA 320 240 QVGA, Mega Drive, Nintendo 3DS (lower screen)
WQVGA 432 240 WQVGA
HVGA 640 240 HVGA, Handheld PC
EGA 640 350 EGA
MDA 720 350 MDA
D1 720 480 D1
D1P 720 576 D1P
VGA 640 480 VGA, MCGA (in monochome), Sun-1 color
WVGA 768 480 WVGA
WGA 800 480 WVGA or WGA, List of mobile phones with WVGA display, Nokia 770/800N/N810/N900, Asus Eee PC 700 and 701 series, Pandora
FWVGA 854 480 FWVGA, List of mobile phones with FWVGA display
SVGA 800 600 SVGA
QHD 960 540 QHD[3], Quarter FHD (AACS ICT), HRHD, Motorola Atrix 4G
WSVGA 1024 576 WSVGA
DVGA 960 640 DVGA, Apple iPhone 4[5][6],4th Generation iPod Touch[7]
XGA 1024 768 XGA, Apple iPad
720p 1280 720 720p (WXGA-H, min.)
WXGA-H 1280 720 720p (WXGA-H, min.)
WXGA- 1280 768 WXGA, avg., BrightView
XGA+ 1152 864 XGA+[8]
WXGA 1280 800 WXGA, max.
720p+ 1366 768 standardized HDTV 720p/1080i displays, HD
HD 1366 768 standardized HDTV 720p/1080i displays, HD
SXGA- 1280 960 SXGA-
WSXGA 1440 900 WSXGA, WXGA+
WXGA+ 1440 900 WSXGA, WXGA+
SXGA 1280 1024 SXGA
900p 1600 900 900p, HD+
HD+ 1600 900 900p, HD+
SXGA+ 1400 1050 SXGA+
WSXGA+ 1680 1050 WSXGA+
UXGA 1600 1200 UXGA
1080i 1920 1080 HD 1080 (1080i, 1080p), FullHD
1080p 1920 1080 HD 1080 (1080i, 1080p), FullHD
WUXGA 1920 1200 WUXGA
QWXGA 2048 1152 QWXGA, 2K
2K 2048 1152 QWXGA, 2K
TXGA 1920 1400 TXGA
QXGA 2048 1536 QXGA
WQHD 2560 1440 WQHD (Dell UltraSharp U2711, Apple iMac)
WQXGA 2560 1600 WQXGA
QSXGA 2560 2048 QSXGA
QSXGA+ 2800 2100 QSXGA+
WQSXGA 3200 2048 WQSXGA
QUXGA 3200 2400 QUXGA
QFHD 3840 2160 QFHD
WQUXGA 3840 2400 WQUXGA
4K 4096 2304 4K
HXGA 4096 3072 HXGA
WHXGA 5120 3200 WHXGA
HSXGA 5120 4096 HSXGA
WHSXGA 6400 4096 WHSXGA
HUXGA 6400 4800 HUXGA
UHDTV 7680 4320 UHDTV
8K 8192 4320 8K
WHUXGA 7680 4800 WHUXGA
Not all of the above modes will be available.
Source: http://en.wikipedia.org/wiki/List_of_common_resolutions
res_set will only allow you to set parameters to those that are reported by Windows to be supported by your video card (unless you use the --raw option).
Unfortunately, your monitor may not be able to support all of these modes.
Therefore, you should test each mode manually, before using res_set.
Failure to do so, may permanently damage your monitor, computer, and/or mind.
To avoid this, res_set will always select the mininum values for the color depth and refresh rate, if you do not specify them.
If you do not specify the resolution, res_set will default to the current resolution for the current monitor, or the monitor you have specified.
If you only specify the width/height, res_set will use the minimum value for the height/width supposed for the width/height you used.
- http://www.vaughns-1-pagers.com/computer/video-resolution.htm
- http://www1.us.dell.com/content/topics/global.aspx/vectors/en/2002_lcd?c=us&l=en&s=corp
- http://www.videotechnology.com/0904/formats.html
- http://www.berghell.com/whitepapers/Display%20Resolutions%20and%20Nomenclature%20-%20Display%20Sizes%20in%20Pixels%20-%20%20Horizontal%20by%20Vertical.pdf
To verify a release, download the .zip, .sha256, and .asc files for the release (replacing res_set-1.8-win32.zip with the release you are verifying):
$ wget https://github.com/rasa/res_set/releases/download/v1.8/res_set-1.8-win32.zip{,.sha256,.asc}
Next, check that sha256sum reports "OK":
$ sha256sum -c res_set-1.8-win32.zip.sha256
res_set-1.8-win32.zip: OK
Lastly, check that GPG reports "Good signature":
$ gpg --keyserver hkps.pool.sks-keyservers.net --recv-key 0x105a5225b6ab4b22
$ gpg --verify res_set-1.8-win32.zip.asc res_set-1.8-win32.zip
gpg: using RSA key 0xFF914F74B4BB6EF3
gpg: Good signature from "Ross Smith II <[email protected]>" [ultimate]
...
To contribute to this project, please see CONTRIBUTING.md.
To view existing bugs, or report a new bug, please see issues.
To view the version history for this project, please see CHANGELOG.md.
This project is MIT licensed.
This project was created and is maintained by Ross Smith II
Feedback, suggestions, and enhancements are welcome.