Sensor Data FSK Transmitter based on RadioLib using SX1276 or CC1101
This project is closely related to BresserWeatherSensorReceiver
- Emulation of sensors for testing purposes
- Emulation of sensors while replacing the data with entirely different sensor values, e.g. using the manufacturer's temperature sensor protocol to display snow depth instead.
- Repeater (combined with receiver)
- Bresser 5-in-1
- Bresser 6-in-1
- Bresser 7-in-1
- Bresser Lightning
- Bresser Leakage
See sensor types in WeatherSensor.h
Select option in SensorTransmitter.h.
uint8_t payload[] = {0xEA, 0xEC, 0x7F, 0xEB, 0x5F, 0xEE, 0xEF, 0xFA, 0xFE, 0x76, 0xBB, 0xFA, 0xFF,
0x15, 0x13, 0x80, 0x14, 0xA0, 0x11, 0x10, 0x05, 0x01, 0x89, 0x44, 0x05, 0x00};
const char json[] =
"{\"sensor_id\":255,\"s_type\":1,\"chan\":0,\"startup\":0,\"battery_ok\":1,\"temp_c\":12.3,\
\"humidity\":44,\"wind_gust_meter_sec\":3.3,\"wind_avg_meter_sec\":2.2,\"wind_direction_deg\":111.1,\
\"rain_mm\":123.4}";
{"sensor_id": 255, "s_type": 1, "chan": 0, "startup": 0, "battery_ok": 1, "temp_c": 12.3, "humidity": 44, "wind_gust_meter_sec": 3.3, "wind_avg_meter_sec": 2.2, "wind_direction_deg": 111.1, "rain_mm": 123.4}
{"sensor_id": 4294967295, "s_type": 4, "chan": 0, "startup": 0, "battery_ok": 1, "temp_c": 12.3, "moisture": 44}
{"sensor_id": 4294967295, "s_type": 1, "chan": 0, "startup": 0, "battery_ok": 1, "temp_c": 12.3, "humidity": 44, "wind_gust_meter_sec": 3.3, "wind_avg_meter_sec": 2.2, "wind_direction_deg": 111.1, "rain_mm": 123.4, "uv": 7.8}
{"sensor_id": 65535, "s_type": 1, "chan": 0, "startup": 0, "battery_ok": 1, "temp_c": 12.3, "humidity": 44, "wind_gust_meter_sec": 3.3, "wind_avg_meter_sec": 2.2, "wind_direction_deg": 111.1, "rain_mm": 123.4, "uv": 7.8, "light_klx": 123.456}
{"sensor_id": 65535, "s_type": 8, "chan": 0, "startup": 0, "battery_ok": 1, "pm_2_5": 2345, "pm_10": 1234}
{"sensor_id": 65535, "s_type": 10, "chan": 0, "startup": 0, "battery_ok": 1, "co2_ppm": 1234}
{"sensor_id": 65535, "s_type": 11, "chan": 0, "startup": 0, "battery_ok": 1, "hcho_ppb": 1234, "voc": 1}
{"sensor_id": 65535, "s_type": 9, "chan": 0, "startup": 0, "battery_ok": 1, "strike_count": 11, "distance_km": 7}
{"sensor_id":4294967295, "s_type": 5, "chan": 0, "startup": 0, "battery_ok": 1, "alarm": 1}
Note: No additional spaces are allowed in commands! (But spaces are permitted in JSON strings.)
| Command | Examples | Description |
|---|---|---|
{...} |
see above | Set JSON message data |
enc[oder]=<encoder> |
enc=bresser-5in1enc=bresser-6in1enc=bresser-7in1enc=bresser-lightningenc=bresser-leakage |
Select encoder |
int[erval]=<interval> |
int=20 |
Set transmit interval in seconds (must be > 10) |