A wrapper for NMAP written in Elixir.
Used version: Nmap 7.80
Nmap (network mapper), the god of port scanners used for network discovery and the basis for most security enumeration during the initial stages of a penetration test. The tool was written and maintained by Fyodor AKA Gordon Lyon.
Nmap displays exposed services on a target machine along with other useful information such as the verion and OS detection.
Nmap has made twelve movie appearances, including The Matrix Reloaded, Die Hard 4, Girl With the Dragon Tattoo, and The Bourne Ultimatum.
Documentation: https://hexdocs.pm/hades
INFO:
Hadesis still under development and by far not complete. Feel free to contribute.
See General Informations for more about this project
To use Hades in your Mix projects, first add Hades as a dependency.
def deps do
[
{:hades, "~> 0.0.1"},
]
endNMAP must be installed.
Some of the NMAP commands require sudo to be executed.
In order to process such commands with Hades you need to add those commads.
The following shows an example on how to add one to sudoers:
Cmnd_Alias NMAP = /usr/bin/nmap -n -oG - -sU -p *
%wheel ALL=(root) NOPASSWD: NMAP
Defaults!NMAP !requirettyIf you want to know more about NMAP sudo behaviour you can find a thread on SuperUser here:
different behavior: “sudo nmap” vs just “nmap”?
You can optionally specify the timeout and the output_path in config.exs:
config :hades, timeout: 20_000
config :hades, output_path: "/path/to/your/desired/output/folder"The timeout is specified in milliseconds.
If unspecified, return the default timeout which is currently 300_000 (corresponds to 5 minutes).
This timeout is propagated to the function Task.await().
If the specified timeout period is exceeded, it is assumed that the process running the NMAP command has timed out.
The output_path is the place where the XML output of the executed NMAP command gets stored.
If there is nothing specified in the config then the default path (which is located in the tmp folder) will be returned.
The snippet below ping scans the network, and lists the target machine if it responds to ping.
iex> Hades.new_command()
...> |> Hades.add_argument(Hades.Arguments.ScanTechniques.arg_sP())
...> |> Hades.add_target("192.168.120.42")
...> |> Hades.scan()
12:19:25.739 [info] NMAP Output: "Starting Nmap 7.80 ( https://nmap.org ) at 2020-02-07 12:19 CET\n"
12:19:25.788 [info] NMAP Output: "Nmap scan report for Felix-MACNCHEESEPRO.root.box (192.168.120.42)\nHost is up (0.00045s latency).\n"
12:19:25.788 [info] NMAP Output: "Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds\n"
12:19:25.789 [info] Port exit: :exit_status: 0
12:19:25.789 [info] EXIT
12:19:25.790 [info] DOWN message from port: #Port<0.14>
%{
hosts: [
%{hostname: "Felix-MACNCHEESEPRO.root.box", ip: "192.168.120.42", ports: []}
],
time: %{
elapsed: 0.06,
endstr: "Fri Feb 7 12:19:25 2020",
startstr: "Fri Feb 7 12:19:25 2020",
unix: 1581074365
}
}INFO: Currently only standard single IPv4 specified targets are supported. In the future I'll add support for IPv4 ranges specified with a subnetmask. This will enable the functionality to scan targets in a specified IP range.
The execution of nmap -sV -version-all -script vulners in Hades looks like the following:
iex> Hades.new_command()
...> |> Hades.add_argument(arg_sV())
...> |> Hades.add_argument(arg_version_all())
...> |> Hades.add_argument(arg_script("vulners"))
...> |> Hades.add_target("192.168.120.87")
...> |> Hades.scan()
12:25:13.092 [info] NMAP Output: "Starting Nmap 7.80 ( https://nmap.org ) at 2020-02-07 12:25 CET\n"
12:25:47.026 [info] NMAP Output: "Nmap scan report for batavis (192.168.120.87)\n"
12:25:47.030 [info] NMAP Output: "Host is up (0.0076s latency).\nNot shown: 994 closed ports\nPORT ... CPE: cpe:/o:linux:linux_kernel\n\n"
12:25:47.031 [info] NMAP Output: "Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .\nNmap done: 1 IP address (1 host up) scanned in 33.97 seconds\n"
12:25:47.060 [info] Port exit: :exit_status: 0
12:25:47.060 [info] EXIT
12:25:47.060 [info] DOWN message from port: #Port<0.26>
%{
hosts: [
%{
hostname: "batavis",
ip: "192.168.120.87",
ports: [
%{
name: "ssh",
output: [],
port: 22,
product: "OpenSSH",
script: [],
state: "open",
version: "7.4p1 Raspbian 10+deb9u6"
},
%{
name: "domain",
output: [],
port: 53,
product: "dnsmasq",
script: [],
state: "open",
version: "pi-hole-2.80"
},
%{
name: "http",
output: [],
port: 80,
product: "Node.js Express framework",
script: [],
state: "open",
version: ""
},
%{
name: "http",
output: ['Problem with XML parsing of /evox/about'],
port: 3000,
product: "Mongoose httpd",
script: ["http-trane-info"],
state: "open",
version: ""
},
%{
name: "http",
output: ['lighttpd/1.4.45',
'\ncpe:/a:lighttpd:lighttpd:1.4.45: \nCVE-2018-19052\t5.0\thttps://vulners.com/cve/CVE-2018-19052'],
port: 8042,
product: "lighttpd",
script: ["http-server-header", "vulners"],
state: "open",
version: "1.4.45"
}
]
}
],
time: %{
elapsed: 33.97,
endstr: "Fri Feb 7 12:25:47 2020",
startstr: "Fri Feb 7 12:25:13 2020",
unix: 1581074747
}
}Here the nmap-vulners NSE script is used to provide informations on vulnerabilities of well-known services that are running on the target host.
I started implementing this wrapper because I needed to reliably execute 'NMAP' commands in an 'Elixir/Phoenix' project.
Currently not 100% of the NMAP functionality is implemented, because the current state is sufficient for the current project.
But I will complete the functionality as soon as I find the time.
In the meantime, if anyone would like to add anything, feel free to do so.
See the changelog for changes between versions.
Hades is not affiliated with nor endorsed by the NMAP project.
NMAP was created and is mainted by Gordon Lyon. You can contact him via [email protected].
Some of the documentation parts were copyed from the linux man pages nmap(1) - Linux man page