• Slides available here.
• Original article posted here.
• Source code here.
• Inspired from my course: Learn Kubernetes by building 10 projects
• Buy Me A Coffee

• Brought to you by FAUN
• Table of Contents
• Introduction
  • Development Environment
  • Developing a Trending Git Repositories API (Flask)
• Pushing the Image to a Remote Registry
  • A Security Notice
• Installing Minikube
• Deploying to Kubernetes
  • Services
  • Inconvenience of Load Balancer Service
• An API Gateway
  • Edge Proxy vs Service Mesh
• Accessing the Kubernetes API
  • Using an API Client
  • Accessing the API from inside a POD
• Star History
• Thanks to all the contributors!

In this workshop, we're going to:

• Deploy Kubernetes services and an Ambassador API gateway.
• Examine the difference between Kubernetes proxies and service mesh like Istio.
• Access the Kubernetes API from the outside and from a Pod.
• Understand what API to choose.
• See how Service Accounts and RBAC works
• Discover some security pitfalls when building Docker images and many interesting things.
• Other things :-)

We will start by developing then deploying a simple Python application (a Flask API that returns the list of trending repositories by programming language).

We are going to use Python 3.6.7

We are using Ubuntu 18.04 that comes with Python 3.6 by default. You should be able to invoke it with the command python3. (Ubuntu 17.10 and above also come with Python 3.6.7)

If you use Ubuntu 16.10 and 17.04, you should be able to install it with the following commands:

sudo apt-get update
sudo apt-get install python3.6

If you are using Ubuntu 14.04 or 16.04, you need to get Python 3 from a Personal Package Archive (PPA):

sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt-get update
sudo apt-get install python3.6

For the other operating systems, visit this guide, follow the instructions and install Python3.

Now install PIP, the package manager:

sudo apt-get install python3-pip

Follow this by the installation of Virtualenvwrapper, which is a virtual environment manager:

sudo pip3 install virtualenvwrapper

Create a folder for your virtualenvs (I use ~/dev/PYTHON_ENVS) and set it as WORKON_HOME:

mkdir  ~/dev/PYTHON_ENVS
export WORKON_HOME=~/dev/PYTHON_ENVS

In order to source the environment details when the user login, add the following lines to ~/.bashrc:

source "/usr/local/bin/virtualenvwrapper.sh"
export WORKON_HOME="~/dev/PYTHON_ENVS"

Make sure to adapt the WORKON_HOME to your real WORKON_HOME. Now we need to create then activate the new environment:

mkvirtualenv --python=/usr/bin/python3 trendinggitrepositories
workon trendinggitrepositories

Let's create the application directories:

mkdir trendinggitrepositories
cd trendinggitrepositories
mkdir api
cd api

Once the virtual environment is activated, we can install Flask:

pip install flask

Inside the API folder api, create a file called app.py and add the following code:

from flask import Flask

app = Flask(__name__)

@app.route('/')
def index():
    return "Hello, World!"

if __name__ == '__main__':
    app.run(debug=True)

This will return a hello world message when a user requests the "/" route.

Now run it using: python app.py and you will see a similar output to the following one:

* Serving Flask app "api" (lazy loading)
* Environment: production
  WARNING: This is a development server. Do not use it in a production deployment.
  Use a production WSGI server instead.
* Debug mode: on
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
* Restarting with stat
* Debugger is active!
* Debugger PIN: 465-052-587

We now need to install PyGithub since we need it to communicate with Github API v3.

pip install PyGithub

Go to Github and create a new app. We will need the application "Client ID" and "Client Secret":

from github import Github
g = Github("xxxxxxxxxxxxx", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")

This is how the mini API looks like:

from flask import Flask, jsonify, abort
import urllib.request, json
from flask import request

app = Flask(__name__)

from github import Github
g = Github("xxxxxx", "xxxxxxxxxxxxx")

@app.route('/')
def get_repos():
    r = []

    try:
        args = request.args
        n = int(args['n'])
    except (ValueError, LookupError) as e:
        abort(jsonify(error="No integer provided for argument 'n' in the URL"))

    repositories = g.search_repositories(query='language:python')[:n]

    for repo in repositories:
        with urllib.request.urlopen(repo.url) as url:
            data = json.loads(url.read().decode())
        r.append(data)

    return jsonify({'repos':r })

if __name__ == '__main__':
    app.run(debug=True)

Let's hide the Github token and secret as well as other variables in the environment.

from flask import Flask, jsonify, abort, request
import urllib.request, json, os
from github import Github

app = Flask(__name__)

CLIENT_ID = os.environ['CLIENT_ID']
CLIENT_SECRET = os.environ['CLIENT_SECRET']
DEBUG = os.environ['DEBUG']

g = Github(CLIENT_ID, CLIENT_SECRET)


@app.route('/')
def get_repos():
    r = []

    try:
        args = request.args
        n = int(args['n'])
    except (ValueError, LookupError) as e:
        abort(jsonify(error="No integer provided for argument 'n' in the URL"))

    repositories = g.search_repositories(query='language:python')[:n]

    for repo in repositories:
        with urllib.request.urlopen(repo.url) as url:
            data = json.loads(url.read().decode())
        r.append(data)

    return jsonify({'repos':r })

if __name__ == '__main__':
    app.run(debug=DEBUG)

The code above will return the top "n" repositories using Python as a programming language. We can use other languages too:

from flask import Flask, jsonify, abort, request
import urllib.request, json, os
from github import Github

app = Flask(__name__)

CLIENT_ID = os.environ['CLIENT_ID']
CLIENT_SECRET = os.environ['CLIENT_SECRET']
DEBUG = os.environ['DEBUG']

g = Github(CLIENT_ID, CLIENT_SECRET)


@app.route('/')
def get_repos():
    r = []

    try:
        args = request.args
        n = int(args['n'])
        l = args['l']
    except (ValueError, LookupError) as e:
        abort(jsonify(error="Please provide 'n' and 'l' parameters"))

    repositories = g.search_repositories(query='language:' + l)[:n]


    try:
        for repo in repositories:
            with urllib.request.urlopen(repo.url) as url:
                data = json.loads(url.read().decode())
            r.append(data)
        return jsonify({
            'repos':r,
            'status': 'ok'
            })
    except IndexError as e:
        return jsonify({
            'repos':r,
            'status': 'ko'
            })

if __name__ == '__main__':
    app.run(debug=DEBUG)

In a .env file, add the variables you want to use:

CLIENT_ID="xxxxx"
CLIENT_SECRET="xxxxxx"
ENV="dev"
DEBUG="True"

Before running the Flask application, you need to source these variables:

source .env

Now, you can go to http://0.0.0.0:5000/?n=1&l=python to get the trendiest Python repository or http://0.0.0.0:5000/?n=1&l=c for C programming language. Here is a list of other programming languages you can test your code with:

C++
Assembly
Objective
Makefile
Shell
Perl
Python
Roff
Yacc
Lex
Awk
UnrealScript
Gherkin
M4
Clojure
XS
Perl
sed

The list is long, but our mini API is working fine. Now, let's freeze the dependencies:

pip freeze > requirements.txt

Before running the API on Kubernetes, let's create a Dockerfile. This is a typical Dockerfile for a Python app:

FROM python:3
ENV PYTHONUNBUFFERED 1
RUN mkdir /app
WORKDIR /app
COPY requirements.txt /app
RUN pip install --upgrade pip
RUN pip install -r requirements.txt
COPY . /app
EXPOSE 5000
CMD [ "python", "app.py" ]

Now you can build it:

docker build --no-cache -t tgr .

Then run it:

docker rm -f tgr
docker run -it  --name tgr -p 5000:5000 -e CLIENT_ID="xxxxxxx" -e CLIENT_SECRET="xxxxxxxxxxxxxxx" -e DEBUG="True" tgr

Let's include some other variables as environment variables:

from flask import Flask, jsonify, abort, request
import urllib.request, json, os
from github import Github

app = Flask(__name__)

CLIENT_ID = os.environ['CLIENT_ID']
CLIENT_SECRET = os.environ['CLIENT_SECRET']
DEBUG = os.environ['DEBUG']
HOST = os.environ['HOST']
PORT = os.environ['PORT']

g = Github(CLIENT_ID, CLIENT_SECRET)


@app.route('/')
def get_repos():
    r = []

    try:
        args = request.args
        n = int(args['n'])
        l = args['l']
    except (ValueError, LookupError) as e:
        abort(jsonify(error="Please provide 'n' and 'l' parameters"))

    repositories = g.search_repositories(query='language:' + l)[:n]


    try:
        for repo in repositories:
            with urllib.request.urlopen(repo.url) as url:
                data = json.loads(url.read().decode())
            r.append(data)
        return jsonify({
            'repos':r,
            'status': 'ok'
            })
    except IndexError as e:
        return jsonify({
            'repos':r,
            'status': 'ko'
            })

if __name__ == '__main__':
    app.run(debug=DEBUG, host=HOST, port=PORT)

For security reasons, let's change the user inside the container from root to a user with less rights that we create:

FROM python:3
ENV PYTHONUNBUFFERED 1
RUN adduser pyuser

RUN mkdir /app
WORKDIR /app
COPY requirements.txt /app
RUN pip install --upgrade pip
RUN pip install -r requirements.txt
COPY . .
RUN chmod +x app.py

RUN chown -R pyuser:pyuser /app
USER pyuser


EXPOSE 5000
CMD ["python","./app.py"]

Now if we want to run the container, we need to add many environment variables to the docker run command. An easier solution is using --env-file with Docker run:

docker run -it --env-file .env my_container

Our .env file looks like the following one:

CLIENT_ID="xxxx"
CLIENT_SECRET="xxxx"
ENV="dev"
DEBUG="True"
HOST="0.0.0.0"
PORT=5000

After this modification, rebuild the image docker build -t tgr . and run it using:

docker rm -f tgr;
docker run -it  --name tgr -p 5000:5000 --env-file .env  tgr

Our application runs using python app.py which is the webserver that ships with Flask and it's great for development and local execution of your program, however, it's not designed to run in a production mode, whether it's a monolithic app or a microservice.

A production server typically receives abuse from spammers, script kiddies, and should be able to handle high traffic. In our case, a good solution is using a WSGI HTTP server like Gunicorn (or uWsgi).

First, let's install gunicorn with the following command: pip install gunicorn. This will require us to update our requirements.txt with pip freeze > requirements.txt

This is why we are going to change our Docker file:

FROM python:3
ENV PYTHONUNBUFFERED 1
RUN adduser pyuser

RUN mkdir /app
WORKDIR /app
COPY requirements.txt /app
RUN pip install --upgrade pip
RUN pip install -r requirements.txt
COPY . .
RUN chmod +x app.py

RUN chown -R pyuser:pyuser /app
USER pyuser


EXPOSE 5000
CMD ["gunicorn", "app:app", "-b", "0.0.0.0:5000"]

In order to optimize the Wsgi server, we need to set the number of its workers and threads to:

workers = multiprocessing.cpu_count() * 2 + 1
threads = 2 * multiprocessing.cpu_count()

This is why we are going to create another Python configuration file (config.py):

import multiprocessing
workers = multiprocessing.cpu_count() * 2 + 1
threads = 2 * multiprocessing.cpu_count()

In the same file, we are going to include other configurations of Gunicorn:

from os import environ as env
bind = env.get("HOST","0.0.0.0") +":"+ env.get("PORT", 5000)

This is the final config.py file:

import multiprocessing
workers = multiprocessing.cpu_count() * 2 + 1
threads = 2 * multiprocessing.cpu_count()

from os import environ as env
bind = env.get("HOST","0.0.0.0") +":"+ env.get("PORT", 5000)

In consequence, we should adapt the Dockerfile to the new Gunicorn configuration by changing the last line to :

CMD ["gunicorn", "app:app", "--config=config.py"]

Now, build docker build -t tgr . and run docker run -it --env-file .env -p 5000:5000 tgr.

A Docker registry is a storage and distribution system for named Docker images.

The images we built are stored in our local environment and can only be used if you deploy locally. However, if you choose to deploy a Kubernetes cluster in a cloud or any different environment, these images will be not found. This is why we need to push the build images to a remote registry.

Think of container registries as a git system for Docker images.

There are plenty of containers registries:

• Dockerhub
• Amazon Elastic Registry (ECR)
• Azure Container Registry (ACR)
• Google Container Registry (GCR)
• CoreOS Quay

You can also host your private container registry that supports OAuth, LDAP and Active Directory authentication using the registry provided by Docker:

docker run -d -p 5000:5000 --restart=always --name registry registry:2

More about self-hosting a registry can be found in the official Docker documentation.

We are going to use Dockerhub; this is why you need to create an account on hub.docker.com.

Now, using Docker CLI, login:

docker login

Now rebuild the image using the new tag:

 docker build -t <username>/<image_name>:<tag_version> .

Example:

docker build -t eon01/tgr:1 .

Finally, push the image:

docker push eon01/tgr:1

Many of the publicly (and even private Docker images) seems to be secure, but it's not the case. When we built our image, we told Docker to copy all the images from the application folder to the image and we push it to an external public registry.

COPY . .        

Or

ADD . .

The above commands will even copy the .env file containing our secrets.

A good solution is to tell Docker to ignore these files during the build using a .dockerignore file:

**.git
**.gitignore
**README.md
**env.*
**Dockerfile*
**docker-compose*
**.env

At this stage, you should remove any image that you pushed to a distant registry, reset the Github tokens, build the new image without any cache:

docker build -t eon01/tgr:1 . --no-cache

Push it again:

docker push eon01/tgr:1

One of the fastest ways to try Kubernetes is using Minkube, which will create a virtual machine for you and deploy a ready-to-use Kubernetes cluster.

Before you begin the installation, you need to make sure that your laptop supports virtualization:

If your using Linux, run the following command and make sure that the output is not empty:

grep -E --color 'vmx|svm' /proc/cpuinfo

Mac users should execute:

sysctl -a | grep -E --color 'machdep.cpu.features|VMX'

If you see VMX in the output, the VT-x feature is enabled in your machine.

Windows users should use systeminfo and you should see the following output:

Hyper-V Requirements:     VM Monitor Mode Extensions: Yes
                          Virtualization Enabled In Firmware: Yes
                          Second Level Address Translation: Yes
                          Data Execution Prevention Available: Yes

If everything is okay, you need to install a hypervisor. You have a list of possibilities here:

• KVM
• VirtualBox
• HyperKit
• VMware Fusion
• Hyper-V

Some of these hypervisors are only compatible with some OSs like Hyper-V (formerly known as Windows Server Virtualization) for windows.

VirtualBox is however cross-platform, and this is why we are going to use it here. Make sure to follow the instructions to install it.

Now, install Minikube.

Linux systems:

curl -Lo minikube https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64 && chmod +x minikube
sudo install minikube /usr/local/bin

MacOs:

brew cask install minikube
curl -Lo minikube https://storage.googleapis.com/minikube/releases/latest/minikube-darwin-amd64 && chmod +x minikube
sudo mv minikube /usr/local/bin

Windows:

Use Chocolatey as an administrator:

choco install minikube

Or use the installer binary.

Minikube does not support all Kubernetes features (like load balancing for example), however, you can find the most important features there:

Minikube supports the following Kubernetes features:

• DNS
• NodePorts
• ConfigMaps and Secrets
• Dashboards
• Container Runtime: Docker, rkt, CRI-O, and containerd
• Enabling CNI (Container Network Interface)
• Ingress

You can also add different addons like:

• addon-manager
• dashboard
• default-storageclass
• efk
• freshpod
• gvisor
• heapster
• ingress
• logviewer
• metrics-server
• nvidia-driver-installer
• nvidia-gpu-device-plugin
• registry
• registry-creds
• storage-provisioner
• storage-provisioner-gluster

If you run minikube start a cluster called minikube will be created; however, you have other choices rather than just creating a regular Minikube cluster. In this example, we are going to create a cluster called "workshop", enable a UI to browse the API and activate tailing logs:

minikube start -p workshop --extra-config=apiserver.enable-swagger-ui=true --alsologtostderr

You have plenty of other options to start a Minikube cluster; you can, for instance, choose the Kubernetes version and the VM driver:

minikube start --kubernetes-version="v1.12.0" --vm-driver="virtualbox"  

Start the new cluster:

minikube start -p workshop --extra-config=apiserver.enable-swagger-ui=true --alsologtostderr

You can get detailed information about the cluster using:

kubectl cluster-info

If you didn't install kubectl, follow the official instructions.

You can open the dashboard using minikube -p workshop dashboard

We have three main ways to deploy our container to Kubernetes and scale it to N replica.

The first one is the original form of replication in Kubernetes, and it's called Replication Controller.

Even if Replica Sets replace it, it's still used in some codes.

This is a typical example:

apiVersion: v1
kind: ReplicationController
metadata:
  name: app
spec:
  replicas: 3
  selector:
    app: app
  template:
    metadata:
      name: app
      labels:
        app: app
    spec:
      containers:
      - name: tgr
        image: reg/app:v1
        ports:
        - containerPort: 80

We can also use Replica Sets, another way to deploy an app and replicate it:

apiVersion: extensions/v1beta1
 kind: ReplicaSet
 metadata:
   name: app
 spec:
   replicas: 3
   selector:
     matchLabels:
       app: app
   template:
     metadata:
       labels:
         app: app
         environment: dev
     spec:
       containers:
       - name: app
         image: reg/app:v1
         ports:
         - containerPort: 80

Replica Set and Replication Controller do almost the same thing.

They ensure that you have a specified number of pod replicas running at any given time in your cluster.

There are however, some differences.

As you may notice, we are using matchLabels instead of label.

Replica Set use Set-Based selectors while replication controllers use Equity-Based selectors.

Selectors match Kubernetes objects (like pods) using the constraints of the specified label, and we are going to see an example in a Deployment specification file.

Label selectors with equality-based requirements use three operators:=,== and !=.

environment = production
tier != frontend
app == my_app (similar to app = my_app)

In the last example, we used this notation:

 ...
 spec:
   replicas: 3
   selector:
     matchLabels:
       app: app
   template:
     metadata:
...     

We could have used set-based requirements:

...
spec:
   replicas: 3
   selector:
     matchExpressions:
      - {key: app, operator: In, values: [app]}     
  template:
     metadata:
...

If we have more than 1 value for the app key, we can use:

...
spec:
   replicas: 3
   selector:
     matchExpressions:
      - {key: app, operator: In, values: [app, my_app, myapp, application]}     
  template:
     metadata:
...

And if we have other keys, we can use them like in the following example:

...
spec:
  replicas: 3
  selector:
    matchExpressions:
     - {key: app, operator: In, values: [app]}
     - {key: tier, operator: NotIn, values: [frontend]}
     - {key: environment, operator: NotIn, values: [production]}
template:
    metadata:
...

Newer Kubernetes resources such as Jobs, Deployments, ReplicaSets, and DaemonSets all support set-based requirements as well.

This is an example of how we use Kubectl with selectors :

kubectl delete pods -l 'env in (production, staging, testing)'

Until now, we have seen that the Replication Controller and Replica Set are two ways to deploy our container and manage it in a Kubernetes cluster. However, the recommended approach is using a Deployment that configures a ReplicaSet.

It is rather unlikely that we will ever need to create Pods directly for a production use-case since Deployments manages to create Pods for us through ReplicaSets.

This is a simple Pod definition:

apiVersion: v1
kind: Pod
metadata:
  name: infinite
  labels:
    env: production
    owner: eon01
spec:
  containers:
  - name: infinite
    image: eon01/infinite

In practice, we need:

1. A Deployment object : Containers are specified here.
2. A Service object: An abstract way to expose an application running on a set of Pods as a network service.

This is a Deployment object that creates three replicas of the container app running the image "reg/app:v1". These containers can be reached using port 80:

apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: app
spec:
  replicas: 3
  template:
    metadata:
      labels:
        app: app
    spec:
      containers:
      - name: app
        image: reg/app:v1
        ports:
        - containerPort: 80

This is the Deployment file we will use (save it to kubernetes/api-deployment.yaml:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: tgr
  labels:
    name: tgr
spec:
  replicas: 1
  selector:
    matchLabels:
      name: tgr
  template:
    metadata:
      name: tgr
      labels:
        name: tgr
    spec:
      containers:
        - name: tgr
          image: eon01/tgr:1
          ports:
            - containerPort: 5000
          resources:
            requests:
              memory: 128Mi
            limits:
              memory: 256Mi
          env:
            - name: CLIENT_ID
              value: "xxxx"
            - name: CLIENT_SECRET
              value: "xxxxxxxxxxxxxxxxxxxxx"
            - name: ENV
              value: "prod"
            - name: DEBUG
              value: "False"
            - name: HOST
              value: "0.0.0.0"
            - name: PORT
              value: "5000"

Let's first talk about the API version; in the first example, we used the extensions/v1beta1 and in the second one, we used apps/v1. You may know that Kubernetes project development is very active, and it may be confusing sometimes to follow all the software updates.

In Kubernetes version 1.9, apps/v1 is introduced, and extensions/v1beta1, apps/v1beta1 and apps/v1beta2 are deprecated.

To make things simpler, to know which version of the API you need to use, use the command:

kubectl api-versions

This above command will give you the API versions compatible with your cluster.

• v1 was the first stable release of the Kubernetes API. It contains many core objects.

• apps/v1 is the most popular API group in Kubernetes, and it includes functionality related to running applications on Kubernetes, like Deployments, RollingUpdates, and ReplicaSets.

• autoscaling/v1 allows pods to be autoscaled based on different resource usage metrics.

• batch/v1 is related to batch processing and and jobs

• batch/v1beta1 is the beta release of batch/v1

• certificates.k8s.io/v1beta1 validates network certificates for secure communication in your cluster.

• extensions/v1beta1 includes many new, commonly used features. In Kubernetes 1.6, some of these features were relocated from extensions to specific API groups like apps .

• policy/v1beta1 enables setting a pod disruption budget and new pod security rules

• rbac.authorization.k8s.io/v1 includes extra functionality for Kubernetes RBAC (role-based access control)

• ..etc

Let's deploy the pod now using the Deployment file we created.

kubectl apply -f kubernetes/api-deployment.yaml

Note that you can use kubectl create -f kubernetes/api-deployment.yaml command. However, there's a difference, between apply and create.

kubectl create is what we call Imperative Management of Kubernetes Objects Using Configuration Files. kubectl create overwrites all changes, and if a resource is having the same id already exists, it will encounter an error.

Using this approach, you tell the Kubernetes API what you want to create, replace, or delete, not how you want your K8s cluster world to look like.

kubectl apply is what we call Declarative Management of Kubernetes Objects Using Configuration Files approach. kubectl apply makes incremental changes. If an object already exists and you want to apply a new value for replica without deleting and recreating the object again, then kubectl apply is what you need. kubectl apply can also be used even if the object (e.g deployment) does not exist yet.

In the Deployment configuration, we also defined our container. We will run a single container here since the replica is set to 1. In the same time, our container will use the image eon01/tgr:1. Since our container will need some environment variables, the best way is to provide them using the Kubernetes deployment definition file.

Also, we can add many other configurations, like the requested memory and its limit. The goal here is not using all that Kubernetes allows is to use in a Deployment file, but to see some of the essential features.

    spec:
      containers:
        - name: tgr
          image: eon01/tgr:1
          ports:
            - containerPort: 5000
          resources:
            requests:
              memory: 128Mi
            limits:
              memory: 256Mi
          env:
            - name: CLIENT_ID
              value: "xxxx"
            - name: CLIENT_SECRET
              value: "xxxxxxxxxxxxxxxxxxxxx"
            - name: ENV
              value: "prod"
            - name: DEBUG
              value: "False"
            - name: HOST
              value: "0.0.0.0"
            - name: PORT
              value: "5000"

In some cases, the Docker registry can be private, and in this case, pulling the image needs authentication. In this case, we need to add the imagePullSecrets configuration:

...
  containers:
  - name: private-reg-container
    image: <your-private-image>
  imagePullSecrets:
  - name: registry-credentials
  ...

This is how the registry-credentials secret is created:

kubectl create secret docker-registry registry-credentials --docker-server=<your-registry-server> --docker-username=<your-name> --docker-password=<your-pword> --docker-email=<your-email>

You can also apply/create the registry-credentials using a YAML file. This is an example:

apiVersion: v1
kind: Secret
metadata:
  ...
  name: registry-credentials
  ...
data:
  .dockerconfigjson: adjAalkazArrA ... JHJH1QUIIAAX0=
type: kubernetes.io/dockerconfigjson

If you decode the .dockerconfigjson file using base64 --decode command, you will understand that it's a simple file storing the configuration to access a registry:

kubectl get secret regcred --output="jsonpath={.data.\.dockerconfigjson}" | base64 --decode

You will get a similar output to the following one:

{"auths":{"your.private.registry.domain.com":{"username":"eon01","password":"xxxxxxxxxxx","email":"[email protected]","auth":"dE3xxxxxxxxx"}}}

Again, let's decode the "auth" value using echo "dE3xxxxxxxxx"|base64 --decode and it will give you something like eon01:xxxxxxxx which has the format username:password.

Now let's see if the deployment is done, let's see how many pods we have:

kubectl get pods

This command will show all the pods within a cluster.

We can scale our deployment using a command similar to the following one:

kubectl scale --replicas=<expected_replica_num> deployment <deployment_name>

Our deployment is called tgr since it's the name we gave to it in the Deployment configuration. You can also make verification by typing kubectl get deployment. Let's scale it:

kubectl scale --replicas=2 deployment tgr

Each of these containers will be accessible on port 500 from outside the container but not from outside the cluster.

The number of pods/containers running for our API can be variable and may change dynamically.

We can set up a load balancer that will balance traffic between the two pods we created, but since each pod can disappear to be recreated, its hostname and address will change.

In all cases, pods are not meant to receive traffic directly, but they need to be exposed to traffic using a Service. In other words, the set of Pods running in one moment in time could be different from the set of Pods running that application a moment later.

At the moment, the only service running is the cluster IP (which is related to Minikube and give us access to the cluster we created):

kubectl get services

In Kubernetes, since Pods are mortals, we should create an abstraction that defines a logical set of Pods and how to access them. This is the role of Services.

In our case, creating a load balancer is a suitable solution. This is the configuration file of a Service object that will listen on the port 80 and load-balance traffic to the Pod with the label nameequals to app . The latter is accessible internally using the port 5000 like it's defined in the Deployment configuration:

...
          ports:
            - containerPort: 5000
...            

This is how the Service looks like:

apiVersion: v1
kind: Service
metadata:
  name: lb
  labels:
    name: lb
spec:
  ports:
  - port: 80
    targetPort: 5000
  selector:
    name: tgr
  type: LoadBalancer

Save this file to kubernetes/api-service.yaml and deploy it using kubectl apply -f kubernetes/api-service.yaml.

If you type kubectl get service, you will get the list of Services running in our local cluster:

NAME         TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP      10.96.0.1       <none>        443/TCP        51m
lb           LoadBalancer   10.99.147.117   <pending>     80:30546/TCP   21s

Not that the ClusterIP does not have an external IP while the app Service external IP is pending. No need to wait for the external IP of the created service, since Minikube does not really deploy a load balancer and this feature will only work if you configure a Load Balancer provider.

If you are using a Cloud provider, say AWS, an AWS load balancer will be set up for you, GKE will provide a Cloud Load Balancer..etc You may also configure other types of load balancers.

There are different types of Services that we can use to expose access to the API publicly:

• ClusterIP: is the default Kubernetes service. It exposes the Service on a cluster-internal IP. You can access it using the Kubernetes proxy.

Illustration by Ahmet Alp Balkan via Medium.

• NodePort: Exposes the Service on each Node’s (VM's) IP at a static port called the NodePort. (In our example, we have a single node). This is a primitive way to make an application accessible from outside the cluster and is not suitable for many use cases since your nodes (VMs) IP addresses may change at any time. The service is accessible using <NodeIP>:<NodePort>.

Illustration by Ahmet Alp Balkan via Medium.

• LoadBalancer: This is more advanced than a NodePort Service. Usually, a Load Balancer exposes a Service externally using a cloud provider’s load balancer. NodePort and ClusterIP Services, to which the external load balancer routes, are automatically created.

Illustration by Ahmet Alp Balkan via Medium.

We created a Load Balancer using a Service on our Minikube cluster, but since we don't have a Load Balancer to run, we can access the API service using the Cluster IP followed by the Service internal Port:

minikube -p workshop ip

Output:

192.168.99.100

Now execute kubectl get services :

NAME         TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP      10.96.0.1       <none>        443/TCP        51m
lb           LoadBalancer   10.99.147.117   <pending>     80:30546/TCP   21s

Use the IP 192.168.99.199 followed by the port 30546 to access the API.

You can test this using a curl command:

curl "http://192.168.99.100:30546/?l=python&n=1"

---
{"repos":[{"archive_url":"https://api.github.com/repos/vinta/awesome-python/{archive_format}{/ref}","archived":false,"assignees_url":"https://api.github.com/repos/vinta/awesome-python/assignees{/user}","blobs_url":"https://api.github.com/repos/vinta/awesome-python/git/blobs{/sha}","branches_url":"https://api.github.com/repos/vinta/awesome-python/branches{/branch}","clone_url":"https://github.com/vinta/awesome-python.git","collaborators_url":"https://api.github.com/repos/vinta/awesome-python/collaborators{/collaborator}","comments_url":"https://api.github.com/repos/vinta/awesome-python/comments{/number}","commits_url":"https://api.github.com/repos/vinta/awesome-python/commits{/sha}","compare_url":"https://api.github.com/repos/vinta/awesome-python/compare/{base}...{head}","contents_url":"https://api.github.com/repos/vinta/awesome-python/contents/{+path}","contributors_url":"https://api.github.com/repos/vinta/awesome-python/contributors","created_at":"2014-06-27T21:00:06Z","default_branch":"master","deployments_url":"https://api.github.com/repos/vinta/awesome-python/deployments","description":"A curated list of awesome Python frameworks, libraries, software and resources","disabled":false,"downloads_url":"https://api.github.com/repos/vinta/awesome-python/downloads","events_url":"https://api.github.com/repos/vinta/awesome-python/events","fork":false,"forks":13929,"forks_count":13929,"forks_url":"https://api.github.com/repos/vinta/awesome-python/forks","full_name":"vinta/awesome-python","git_commits_url":"https://api.github.com/repos/vinta/awesome-python/git/commits{/sha}","git_refs_url":"https://api.github.com/repos/vinta/awesome-python/git/refs{/sha}","git_tags_url":"https://api.github.com/repos/vinta/awesome-python/git/tags{/sha}","git_url":"git://github.com/vinta/awesome-python.git","has_downloads":true,"has_issues":true,"has_pages":true,"has_projects":false,"has_wiki":false,"homepage":"https://awesome-python.com/","hooks_url":"https://api.github.com/repos/vinta/awesome-python/hooks","html_url":"https://github.com/vinta/awesome-python","id":21289110,"issue_comment_url":"https://api.github.com/repos/vinta/awesome-python/issues/comments{/number}","issue_events_url":"https://api.github.com/repos/vinta/awesome-python/issues/events{/number}","issues_url":"https://api.github.com/repos/vinta/awesome-python/issues{/number}","keys_url":"https://api.github.com/repos/vinta/awesome-python/keys{/key_id}","labels_url":"https://api.github.com/repos/vinta/awesome-python/labels{/name}","language":"Python","languages_url":"https://api.github.com/repos/vinta/awesome-python/languages","license":{"key":"other","name":"Other","node_id":"MDc6TGljZW5zZTA=","spdx_id":"NOASSERTION","url":null},"merges_url":"https://api.github.com/repos/vinta/awesome-python/merges","milestones_url":"https://api.github.com/repos/vinta/awesome-python/milestones{/number}","mirror_url":null,"name":"awesome-python","network_count":13929,"node_id":"MDEwOlJlcG9zaXRvcnkyMTI4OTExMA==","notifications_url":"https://api.github.com/repos/vinta/awesome-python/notifications{?since,all,participating}","open_issues":482,"open_issues_count":482,"owner":{"avatar_url":"https://avatars2.githubusercontent.com/u/652070?v=4","events_url":"https://api.github.com/users/vinta/events{/privacy}","followers_url":"https://api.github.com/users/vinta/followers","following_url":"https://api.github.com/users/vinta/following{/other_user}","gists_url":"https://api.github.com/users/vinta/gists{/gist_id}","gravatar_id":"","html_url":"https://github.com/vinta","id":652070,"login":"vinta","node_id":"MDQ6VXNlcjY1MjA3MA==","organizations_url":"https://api.github.com/users/vinta/orgs","received_events_url":"https://api.github.com/users/vinta/received_events","repos_url":"https://api.github.com/users/vinta/repos","site_admin":false,"starred_url":"https://api.github.com/users/vinta/starred{/owner}{/repo}","subscriptions_url":"https://api.github.com/users/vinta/subscriptions","type":"User","url":"https://api.github.com/users/vinta"},"private":false,"pulls_url":"https://api.github.com/repos/vinta/awesome-python/pulls{/number}","pushed_at":"2019-08-16T15:21:42Z","releases_url":"https://api.github.com/repos/vinta/awesome-python/releases{/id}","size":4994,"ssh_url":"[email protected]:vinta/awesome-python.git","stargazers_count":71222,"stargazers_url":"https://api.github.com/repos/vinta/awesome-python/stargazers","statuses_url":"https://api.github.com/repos/vinta/awesome-python/statuses/{sha}","subscribers_count":5251,"subscribers_url":"https://api.github.com/repos/vinta/awesome-python/subscribers","subscription_url":"https://api.github.com/repos/vinta/awesome-python/subscription","svn_url":"https://github.com/vinta/awesome-python","tags_url":"https://api.github.com/repos/vinta/awesome-python/tags","teams_url":"https://api.github.com/repos/vinta/awesome-python/teams","trees_url":"https://api.github.com/repos/vinta/awesome-python/git/trees{/sha}","updated_at":"2019-08-17T16:11:44Z","url":"https://api.github.com/repos/vinta/awesome-python","watchers":71222,"watchers_count":71222}],"status":"ok"}

Typically, load balancers are provisioned by the Cloud provider you're using.

A load balancer can handle one service but imagine if you have ten services, each one will need a load balancer; this is when it becomes costly.

The best solution, in this case, is set up an Ingress controller that acts as a smart router and can be deployed at the edge of the cluster, therefore in the front of all the services you deploy.

Illustration by Ahmet Alp Balkan via Medium.

Ambassador is an Open Source Kubernetes-Native API Gateway built on the Envoy Proxy. It provides a solution for traffic management and application security. It's described as is a specialized control plane that translates Kubernetes annotations to Envoy configuration.

All traffic is directly handled by the high-performance Envoy Proxy.

Photo credit: https://www.getambassador.io/concepts/architecture

As it's described in Envoy official website:

Originally built at Lyft, Envoy is a high-performance C++ distributed proxy designed for single services and applications, as well as a communication bus and “universal data plane” designed for large microservice “service mesh” architectures. Built on the learnings of solutions such as NGINX, HAProxy, hardware load balancers, and cloud load balancers, Envoy runs alongside every application and abstracts the network by providing common features in a platform-agnostic manner. When all service traffic in an infrastructure flows via an Envoy mesh, it becomes easy to visualize problem areas via consistent observability, tune overall performance, and add substrate features in a single place.

We are going to use Ambassador as an API Gateway; we no longer need the load balancer service we created in the first part. Let's remove it:

kubectl delete -f kubernetes/api-service.yaml

To deploy Ambassador in your default namespace, first, you need to check if Kubernetes has RBAC enabled:

kubectl cluster-info dump --namespace kube-system | grep authorization-mode

If RBAC is enabled:

kubectl apply -f https://getambassador.io/yaml/ambassador/ambassador-rbac.yaml

Without RBAC, you can use:

kubectl apply -f https://getambassador.io/yaml/ambassador/ambassador-no-rbac.yaml

Ambassador is deployed as a Kubernetes Service that references the ambassador Deployment you deployed previously. Create the following YAML and put it in a file called kubernetes/ambassador-service.yaml.

---
apiVersion: v1
kind: Service
metadata:
  name: ambassador
spec:
  type: LoadBalancer
  externalTrafficPolicy: Local
  ports:
   - port: 80
     targetPort: 8080
  selector:
    service: ambassador

Deploy the service:

kubectl apply -f ambassador-service.yaml

Now let's use this file containing the Deployment configuration for our API as well as the Ambassador Service configuration relative to the same Deployment. Call this file kubernetes/api-deployment-with-ambassador.yaml:

---
apiVersion: v1
kind: Service
metadata:
  name: tgr
  annotations:
    getambassador.io/config: |
      ---
      apiVersion: ambassador/v1
      kind: Mapping
      name: tgr_mapping
      prefix: /
      service: tgr:5000

spec:
  ports:
  - name: tgr
    port: 5000
    targetPort: 5000
  selector:
    app: tgr
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: tgr
spec:
  replicas: 1
  selector:
    matchLabels:
      app: tgr
  strategy:
    type: RollingUpdate
  template:
    metadata:
      labels:
        app: tgr
    spec:
      containers:
      - name: tgr
        image: eon01/tgr:1
        ports:
          - containerPort: 5000
        env:
          - name: CLIENT_ID
            value: "453486b9225e0e26c525"
          - name: CLIENT_SECRET
            value: "a63e841d5c18f41b9264a1a2ac0675a1f903ee8c"
          - name: ENV
            value: "prod"
          - name: DEBUG
            value: "False"
          - name: HOST
            value: "0.0.0.0"
          - name: PORT
            value: "5000"

Deploy the previously created configuration:

kubectl apply -f kubernetes/api-deployment-with-ambassador.yaml

Let's test things out: We need the external IP for Ambassador:

kubectl get svc -o wide ambassador

You should see something like:

NAME         TYPE           CLUSTER-IP       EXTERNAL-IP   PORT(S)        AGE    SELECTOR
ambassador   LoadBalancer   10.103.201.130   <pending>     80:30283/TCP   9m2s   service=ambassador

If you are using Minikube, it is normal to see the external IP in the pending state.

We can use minikube -p workshop service list to get the Ambassador IP. You will get an output similar to the following:

|-------------|------------------|-----------------------------|
|  NAMESPACE  |       NAME       |             URL             |
|-------------|------------------|-----------------------------|
| default     | ambassador       | http://192.168.99.100:30283 |
| default     | ambassador-admin | http://192.168.99.100:30084 |
| default     | kubernetes       | No node port                |
| default     | tgr              | No node port                |
| kube-system | kube-dns         | No node port                |
|-------------|------------------|-----------------------------|

Now you can use the API using the IP http://192.168.99.100:30283:

curl "http://192.168.99.100:30283/?l=python&n=1"
---
{"repos":[{"archive_url":"https://api.github.com/repos/vinta/awesome-python/{archive_format}{/ref}","archived":false,"assignees_url":"https://api.github.com/repos/vinta/awesome-python/assignees{/user}","blobs_url":"https://api.github.com/repos/vinta/awesome-python/git/blobs{/sha}","branches_url":"https://api.github.com/repos/vinta/awesome-python/branches{/branch}","clone_url":"https://github.com/vinta/awesome-python.git","collaborators_url":"https://api.github.com/repos/vinta/awesome-python/collaborators{/collaborator}","comments_url":"https://api.github.com/repos/vinta/awesome-python/comments{/number}","commits_url":"https://api.github.com/repos/vinta/awesome-python/commits{/sha}","compare_url":"https://api.github.com/repos/vinta/awesome-python/compare/{base}...{head}","contents_url":"https://api.github.com/repos/vinta/awesome-python/contents/{+path}","contributors_url":"https://api.github.com/repos/vinta/awesome-python/contributors","created_at":"2014-06-27T21:00:06Z","default_branch":"master","deployments_url":"https://api.github.com/repos/vinta/awesome-python/deployments","description":"A curated list of awesome Python frameworks, libraries, software and resources","disabled":false,"downloads_url":"https://api.github.com/repos/vinta/awesome-python/downloads","events_url":"https://api.github.com/repos/vinta/awesome-python/events","fork":false,"forks":13933,"forks_count":13933,"forks_url":"https://api.github.com/repos/vinta/awesome-python/forks","full_name":"vinta/awesome-python","git_commits_url":"https://api.github.com/repos/vinta/awesome-python/git/commits{/sha}","git_refs_url":"https://api.github.com/repos/vinta/awesome-python/git/refs{/sha}","git_tags_url":"https://api.github.com/repos/vinta/awesome-python/git/tags{/sha}","git_url":"git://github.com/vinta/awesome-python.git","has_downloads":true,"has_issues":true,"has_pages":true,"has_projects":false,"has_wiki":false,"homepage":"https://awesome-python.com/","hooks_url":"https://api.github.com/repos/vinta/awesome-python/hooks","html_url":"https://github.com/vinta/awesome-python","id":21289110,"issue_comment_url":"https://api.github.com/repos/vinta/awesome-python/issues/comments{/number}","issue_events_url":"https://api.github.com/repos/vinta/awesome-python/issues/events{/number}","issues_url":"https://api.github.com/repos/vinta/awesome-python/issues{/number}","keys_url":"https://api.github.com/repos/vinta/awesome-python/keys{/key_id}","labels_url":"https://api.github.com/repos/vinta/awesome-python/labels{/name}","language":"Python","languages_url":"https://api.github.com/repos/vinta/awesome-python/languages","license":{"key":"other","name":"Other","node_id":"MDc6TGljZW5zZTA=","spdx_id":"NOASSERTION","url":null},"merges_url":"https://api.github.com/repos/vinta/awesome-python/merges","milestones_url":"https://api.github.com/repos/vinta/awesome-python/milestones{/number}","mirror_url":null,"name":"awesome-python","network_count":13933,"node_id":"MDEwOlJlcG9zaXRvcnkyMTI4OTExMA==","notifications_url":"https://api.github.com/repos/vinta/awesome-python/notifications{?since,all,participating}","open_issues":482,"open_issues_count":482,"owner":{"avatar_url":"https://avatars2.githubusercontent.com/u/652070?v=4","events_url":"https://api.github.com/users/vinta/events{/privacy}","followers_url":"https://api.github.com/users/vinta/followers","following_url":"https://api.github.com/users/vinta/following{/other_user}","gists_url":"https://api.github.com/users/vinta/gists{/gist_id}","gravatar_id":"","html_url":"https://github.com/vinta","id":652070,"login":"vinta","node_id":"MDQ6VXNlcjY1MjA3MA==","organizations_url":"https://api.github.com/users/vinta/orgs","received_events_url":"https://api.github.com/users/vinta/received_events","repos_url":"https://api.github.com/users/vinta/repos","site_admin":false,"starred_url":"https://api.github.com/users/vinta/starred{/owner}{/repo}","subscriptions_url":"https://api.github.com/users/vinta/subscriptions","type":"User","url":"https://api.github.com/users/vinta"},"private":false,"pulls_url":"https://api.github.com/repos/vinta/awesome-python/pulls{/number}","pushed_at":"2019-08-16T15:21:42Z","releases_url":"https://api.github.com/repos/vinta/awesome-python/releases{/id}","size":4994,"ssh_url":"[email protected]:vinta/awesome-python.git","stargazers_count":71269,"stargazers_url":"https://api.github.com/repos/vinta/awesome-python/stargazers","statuses_url":"https://api.github.com/repos/vinta/awesome-python/statuses/{sha}","subscribers_count":5254,"subscribers_url":"https://api.github.com/repos/vinta/awesome-python/subscribers","subscription_url":"https://api.github.com/repos/vinta/awesome-python/subscription","svn_url":"https://github.com/vinta/awesome-python","tags_url":"https://api.github.com/repos/vinta/awesome-python/tags","teams_url":"https://api.github.com/repos/vinta/awesome-python/teams","trees_url":"https://api.github.com/repos/vinta/awesome-python/git/trees{/sha}","updated_at":"2019-08-19T08:21:51Z","url":"https://api.github.com/repos/vinta/awesome-python","watchers":71269,"watchers_count":71269}],"status":"ok"}

You may have heard of tools like Istio and Linkerd and it may be confusing to compare Ambassador or Envoy to these tools. We are going to understand the differences here.

Istio is described as a tool to connect, secure, control, and observe services.The same features are implemented by its alternatives like Linkerd or Consul. These tools are called Service Mesh.

Ambassador is a, API gateway for services (or microservices) and it's deployed at the edge of your network. It routes incoming traffic to a cluster internal services and this what we call "north-south" traffic.

Istio, in the other hand, is a service mesh for Kubernetes services (or microservices). It's designed to add application-level Layer (L7) observability, routing, and resilience to service-to-service traffic and this is what we call "east-west" traffic.

The fact that both Istio and Ambassador are built using Envoy, does not mean they have the same features or usability. Therefore, they can be deployed together in the same cluster.

If you remember, when we created our Minikube cluster we used --extra-config=apiserver.enable-swagger-ui=true. This configuration makes the Kubernetes API "browsable" via a web browser.

When using Minikube, in order to access the Kubernetes API using a browser, we need to create a proxy:

kubectl proxy --port=8080 &

Now we can test this out using Curl:

curl http://localhost:8080/api/
---
{
  "kind": "APIVersions",
  "versions": [
    "v1"
  ],
  "serverAddressByClientCIDRs": [
    {
      "clientCIDR": "0.0.0.0/0",
      "serverAddress": "192.168.99.100:8443"
    }
  ]
}

We can get a list of the APIs and resources we can access by visiting: http://localhost:8080/.

For instance, we can get a list of metrics here http://localhost:8080/metrics.

We are going to use the Kubernetes client:

pip install kubernetes

# import json
# import requests
# @app.route('/pods')
# def monitor():
#
#     api_url = "http://kubernetes.default.svc/api/v1/pods/"
#     response = requests.get(api_url)
#     if response.status_code == 200:
#         return json.loads(response.content.decode('utf-8'))
#     else:
#         return None

By default, a Pod is associated with a service account, and a credential (token) for that service account is placed into the filesystem tree of each container in that Pod, at /var/run/secrets/kubernetes.io/serviceaccount/token.

Let's try to go inside a Pod and access the API. Use kubectl get pods to get a list of pods

NAME                          READY   STATUS    RESTARTS   AGE
ambassador-64d8b877f9-4bzvn   1/1     Running   0          103m
ambassador-64d8b877f9-b68w6   1/1     Running   0          103m
ambassador-64d8b877f9-vw9mm   1/1     Running   0          103m
tgr-8d78d599f-pt5xx           1/1     Running   0          4m17s

Now log inside the API Pod:

kubectl exec -it tgr-8d78d599f-pt5xx bash

Assign the token to a variable:

KUBE_TOKEN=$(cat /var/run/secrets/kubernetes.io/serviceaccount/token)

Notice that the token file is added automatically by Kubernetes.

We also have other variables already set like:

echo $KUBERNETES_SERVICE_HOST
10.96.0.1

echo $KUBERNETES_PORT_443_TCP_PORT
443

echo $HOSTNAME
tgr-8d78d599f-pt5xx

We are going to use these variables to access the list of Pods using this Curl command:

curl -sSk -H "Authorization: Bearer $KUBE_TOKEN" https://$KUBERNETES_SERVICE_HOST:$KUBERNETES_PORT_443_TCP_PORT/api/v1/namespaces/default/pods

At this stage, you should have an error output saying that you don't have the rights to access this API endpoint, which is normal:

{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {

  },
  "status": "Failure",
  "message": "pods \"tgr-8d78d599f-pt5xx\" is forbidden: User \"system:serviceaccount:default:default\" cannot get resource \"pods\" in API group \"\" in the namespace \"default\"",
  "reason": "Forbidden",
  "details": {
    "name": "tgr-8d78d599f-pt5xx",
    "kind": "pods"
  },
  "code": 403
}

The Pod is using the default Service Account and it does not have the right to list the Pods.

In order to fix this, exit the container and create a file called kubernetes/service-account.yaml, add the following lines:

kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: pods-list
rules:
- apiGroups: [""]
  resources: ["pods"]
  verbs: ["list"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: pods-list
subjects:
- kind: ServiceAccount
  name: default
  namespace: default
roleRef:
  kind: ClusterRole
  name: pods-list
  apiGroup: rbac.authorization.k8s.io

Then apply the new configuration using kubectl apply -f kubernetes/service-account.yaml.

Now you can access the list of Pods:

{
  "kind": "PodList",
  "apiVersion": "v1",
  "metadata": {
    "selfLink": "/api/v1/namespaces/default/pods/",
    "resourceVersion": "19589"
  },
  "items": [
    {
      "metadata": {
        "name": "ambassador-64d8b877f9-4bzvn",
        "generateName": "ambassador-64d8b877f9-",
        "namespace": "default",
        "selfLink": "/api/v1/namespaces/default/pods/ambassador-64d8b877f9-4bzvn",
        "uid": "63f62ede-de77-441d-85f7-daf9cbc7040f",
        "resourceVersion": "1047",
        "creationTimestamp": "2019-08-19T08:12:47Z",
        "labels": {
          "pod-template-hash": "64d8b877f9",
          "service": "ambassador"
        },
        "annotations": {
          "consul.hashicorp.com/connect-inject": "false",
          "sidecar.istio.io/inject": "false"
        },
        "ownerReferences": [
          {
            "apiVersion": "apps/v1",
            "kind": "ReplicaSet",
            "name": "ambassador-64d8b877f9",
            "uid": "383c2e4b-7179-4806-b7bf-3682c7873a10",
            "controller": true,
            "blockOwnerDeletion": true
          }
        ]
      },
      "spec": {
        "volumes": [
          {
            "name": "ambassador-token-rdqq6",
            "secret": {
              "secretName": "ambassador-token-rdqq6",
              "defaultMode": 420
            }
          }
        ],
        "containers": [
          {
            "name": "ambassador",
            "image": "quay.io/datawire/ambassador:0.75.0",
            "ports": [
              {
                "name": "http",
                "containerPort": 8080,
                "protocol": "TCP"
              },
...

What about creating your own monitoring/observability solution using Python (or any other programming language) and the Kubernetes API ? This could be probably the subject of the upcoming workshop.

If this workshop solved some of your problems, please consider giving it a star and/or buying me a coffee: