smtp-user-enum

SMTP user enumeration via VRFY, EXPN and RCPT with clever timeout, retry and reconnect functionality.

Some SMTP server take a long time for initial communication (banner and greeting) and then handle subsequent commands quite fast. Then again they randomly start to get slow again.

This implementation of SMTP user enumeration counteracts with granular timeout, retry and reconnect options for initial communication and enumeration separately. The defaults should work fine, however if you encounter slow enumeration, adjust the settings according to your needs.

Additionally if it encounters anything like 421 Too many errors on this connection it will automatically and transparently reconnect and continue from where it left off.

Inspired by smtp-user-enum Perl script and rewritten in Python with full Python2 and Python3 support.

Table of contents

🎉 Installation

pip install smtp-user-enum

⭐ Features

Enumerate users via VRFY, EXPN or RCPT
Find out which users are aliases via RCPT
Fully customize from email for RCPT mode
Append domains to usernames
Wrap usernames or emails in < and >
Very verbose mode
Very granular timing, retry and reconnect options for all phases
Works with Python2 and Python3

See troubleshooting section for examples on how to use different options

💻 Usage

$ smtp-user-enum --help

usage: smtp-user-enum [options] -u/-U host port
       smtp-user-enum --help
       smtp-user-enum --version

SMTP user enumeration tool with clever timeout, retry and reconnect functionality.

Some SMTP server take a long time for initial communication (banner and greeting) and then
handle subsequent commands quite fast. Then again they randomly start to get slow again.

This implementation of SMTP user enumeration counteracts with granular timeout, retry and
reconnect options for initial communication and enumeration separately.
The defaults should work fine, however if you encounter slow enumeration, adjust the settings
according to your needs.

Additionally if it encounters anything like '421 Too many errors on this connection' it will
automatically and transparently reconnect and continue from where it left off.

positional arguments:
  host                  IP or hostname to connect to.
  port                  Port to connect to.

optional arguments:
  -h, --help            show this help message and exit
  -v, --version         Show version information,
  -m mode, --mode mode  Mode to enumerate SMTP users.
                        Supported modes: VRFY, EXPN, RCPT
                        Default: VRFY
  -d addr, --domain addr
                        Domain to append to users to convert into email addresses.
                        Useful if you see this response: '550 A valid address is required'
                        Default: Nothing appended
  -w, --wrap            Wrap the username or email address in '<' and '>' characters.
                        Usefule if you see this response: '501 5.5.2 Syntax error in parameters or arguments'.
                        Makes sense to combine with -d/--domain option.
                        Default: Nothing wrapped
  -f addr, --from-mail addr
                        MAIL FROM email address. Only used in RCPT mode
                        Default: [email protected]
  -l addr, --helo addr  Domain name of sending host used in HELO command.
  -u user, --user user  Username to test.
  -U file, --file file  Newline separated wordlist of users to test.
  -V, --verbose         Show verbose output. Useful to adjust your timing and retry settings.
  --timeout-init sec    Timeout for initial communication (connect, banner and greeting).
                        Default: 25
  --timeout-enum sec    Timeout for user enumeration.
                        Default: 10
  --retry-init int      Number of retries for initial communication (connect, banner and greeting).
                        Default: 4
  --retry-enum int      Number of retries for user enumeration.
                        Default: 5
  --reconnect int       Number of reconnects during user enumeration after retries have exceeded.
                        Default: 3

😈 VRFY mode (default)

The SMTP "VRFY" command allows you to verify whether a the system can deliver mail to a particular user.

Source: https://www.rapid7.com/db/vulnerabilities/smtp-general-vrfy

How does VRFY work

The VRFY mode can easily be tested with nc or telnet as shown below:

$ nc mail.example.tld 25

220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Thu, 23 Jan 2020 16:03:22 +0200
HELO changeme
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
VRFY someuser
550 5.1.1 someuser... User unknown
VRFY bob
250 2.1.5 <[email protected]>

As can be seen VRFY someuser tells us it does not exist whereas VRFY bob yields a positive result.

Successful VRFY enumeration

$ smtp-user-enum -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
Start enumerating users with VRFY mode ...
[----] admin             550 5.1.1 admin... User unknown
[----] OutOfBox          550 5.1.1 OutOfBox... User unknown
[SUCC] root              250 2.1.5 root <[email protected]>
[SUCC] adm               250 2.1.5 <[email protected]>
[----] avahi-autoipd     550 5.1.1 avahi-autoipd... User unknown
[----] backup            550 5.1.1 backup... User unknown
[TEST] bin ...

Failed VRFY enumeration

In case the VRFY mode is not successful as shown below, you will need to try out a different mode.

$ smtp-user-enum -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
Start enumerating users with VRFY mode ...
[----] 4Dgifts           502 VRFY disallowed.
[----] EZsetup           502 VRFY disallowed.
[----] OutOfBox          502 VRFY disallowed.
[----] root              502 VRFY disallowed.
[----] adm               502 VRFY disallowed.
[----] admin             502 VRFY disallowed.
[----] administrator     502 VRFY disallowed.
[----] anon              502 VRFY disallowed.

😈 EXPN mode

The SMTP "EXPN" command allows you to expand a mailing list or alias, to see where mail addressed to the alias actually goes. For example, many organizations alias postmaster to root, so that mail addressed to postmaster will get delivered to the system administrator. Issuing "EXPN postmaster" via SMTP would reveal that postmaster is aliased to root.

The "EXPN" command can be used by attackers to learn about valid usernames on the target system. On some SMTP servers, EXPN can be used to show the subscribers of a mailing list -- subscription lists are generally considered to be sensitive information.

Source: https://www.rapid7.com/db/vulnerabilities/smtp-general-expn

How does EXPN work

The EXPN mode can easily be tested with nc or telnet as shown below:

$ nc mail.example.tld 25

220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Thu, 23 Jan 2020 16:03:22 +0200
HELO changeme
250 mail.example.tld [10.0.0.1], pleased to meet you
EXPN someuser
550 5.1.1 someuser... User unknown
EXPN bob
250 2.1.5 <[email protected]>
EXPN bin
250 2.1.5 root <[email protected]>

As can be seen EXPN someuser tells us it does not exist whereas EXPN bob and EXPN bin yield positive results. You can also see from the output that bob is a real user on the system, whereas bin is just an alias pointing to root.

Successful EXPN enumeration

$ smtp-user-enum -m EXPN -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
Start enumerating users with EXPN mode ...
[----] 4Dgifts           550 5.1.1 4Dgifts... User unknown
[----] EZsetup           550 5.1.1 EZsetup... User unknown
[----] OutOfBox          550 5.1.1 OutOfBox... User unknown
[SUCC] root              250 2.1.5 root <root@barry>
[SUCC] adm               250 2.1.5 root <root@barry>
[----] admin             550 5.1.1 admin... User unknown
[----] administrator     550 5.1.1 administrator... User unknown
[----] anon              550 5.1.1 anon... User unknown
[----] auditor           550 5.1.1 auditor... User unknown

Note: the right side shows to what mailbox the email will be forwarded for the alias.

Failed EXPN enumeration

In case the EXPN mode is not successful as shown below, you will need to try out a different mode.

$ smtp-user-enum -m EXPN -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
Start enumerating users with EXPN mode ...
[----] adm               502 Unimplemented command.
[----] admin             502 Unimplemented command.
[----] administrator     502 Unimplemented command.
[----] anon              502 Unimplemented command.
[----] auditor           502 Unimplemented command.
[----] avahi             502 Unimplemented command.
[----] avahi-autoipd     502 Unimplemented command.
[----] bbs               502 Unimplemented command.
[----] bin               502 Unimplemented command.

😈 RCPT mode

This is usually the most useful command to fish for usernames as VRFY and EXPN are often disabled.

How does RCPT work

The RCPT mode can easily be tested with nc or telnet as shown below:

$ nc mail.example.tld 25

220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Thu, 23 Jan 2020 16:03:22 +0200
HELO changeme
250 mail.example.tld [10.0.0.1], pleased to meet you
MAIL FROM:[email protected]
250 2.1.0 [email protected]... Sender ok
RCPT TO:someuser
550 5.1.1 someuser... User unknown
RCPT TO:bob
250 2.1.5 bob... Recipient ok

As can be seen RCPT TO: someuser tells us it does not exist whereas RCPT TO: bob yields a positive result.

Successful RCPT enumeration

$ smtp-user-enum -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 [email protected]... Sender ok
Start enumerating users with RCPT mode ...
[----] OutOfBox          550 5.1.1 OutOfBox... User unknown
[SUCC] root              250 2.1.5 root... Recipient ok
[SUCC] adm               250 2.1.5 adm... Recipient ok
[----] admin             550 5.1.1 admin... User unknown
[----] administrator     550 5.1.1 administrator... User unknown
[----] backup            550 5.1.1 backup... User unknown
[----] bbs               550 5.1.1 bbs... User unknown
[SUCC] bin               250 2.1.5 bin... Recipient ok
[----] checkfs           550 5.1.1 checkfs... User unknown
[----] checksys          550 5.1.1 checksys... User unknown

Troubleshooting EXPN enumeration

550 A valid address is required

$ smtp-user-enum -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 [email protected]... Sender ok
Start enumerating users with RCPT mode ...
[----] 4Dgifts           550 A valid address is required.
[----] EZsetup           550 A valid address is required.
[----] OutOfBox          550 A valid address is required.
[----] root              550 A valid address is required.
[----] adm               550 A valid address is required.

By the above output you can see that pure usernames are not allowed to be specified, this can be counteracted with the -d command, to append a domain to each username during enumeration:

450 Relaying temporarily denied

$ smtp-user-enum -m RCPT -d 'example.com' -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 [email protected]... Sender ok
Start enumerating users with RCPT mode ...
[----] 4Dgifts           450 4.7.1 [email protected]... Relaying temporarily denied. Cannot resolve PTR record for 10.0.0.1
[----] EZsetup           450 4.7.1 [email protected]... Relaying temporarily denied. Cannot resolve PTR record for 10.0.0.1
[----] OutOfBox          450 4.7.1 [email protected]... Relaying temporarily denied. Cannot resolve PTR record for 10.0.0.1
[----] root              450 4.7.1 [email protected]... Relaying temporarily denied. Cannot resolve PTR record for 10.0.0.1
[----] adm               450 4.7.1 [email protected]... Relaying temporarily denied. Cannot resolve PTR record for 10.0.0.1

Looks like the server is also hardened against relaying. To circumvent this, you could try to specify the server's hostname (cann be seen in the banner or greeting) or use 127.0.0.1 as the domain for users:

False positives

$ smtp-user-enum -m RCPT -d '127.0.0.1' -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 [email protected]... Sender ok
Start enumerating users with RCPT mode ...
[SUCC] 4Dgifts           250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] EZsetup           250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] OutOfBox          250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] root              250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] adm               250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] admin             250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] administrator     250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] anon              250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] auditor           250 2.1.5 [email protected]... Recipient ok (will queue)
[SUCC] backup            250 2.1.5 [email protected]... Recipient ok (will queue)

Looks like 127.0.0.1 as the user's domain leads to false positives, let's try the exact domain speified in the banner mail.example.tld:

$ smtp-user-enum -m RCPT -d '127.0.0.1' -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 [email protected]... Sender ok
Start enumerating users with RCPT mode ...
[----] 4Dgifts           550 5.1.1 [email protected]... User unknown
[----] EZsetup           550 5.1.1 [email protected]... User unknown
[----] OutOfBox          550 5.1.1 [email protected]... User unknown
[SUCC] ROOT              250 2.1.5 [email protected]... Recipient ok
[SUCC] adm               250 2.1.5 [email protected]... Recipient ok
[----] admin             550 5.1.1 [email protected]... User unknown
[----] administrator     550 5.1.1 [email protected]... User unknown
[----] anon              550 5.1.1 [email protected]... User unknown
[----] auditor           550 5.1.1 [email protected]... User unknown
[----] avahi             550 5.1.1 [email protected]... User unknown
[----] avahi-autoipd     550 5.1.1 [email protected]... User unknown
[----] backup            550 5.1.1 [email protected]... User unknown
[----] bbs               550 5.1.1 [email protected]... User unknown
[SUCC] bin               250 2.1.5 [email protected]... Recipient ok
[----] checkfs           550 5.1.1 [email protected]... User unknown

Investigating timeouts

$ smtp-user-enum -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
timed out

Let's add the -V to get some verbosity:

$ smtp-user-enum -V -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt -l mydomain.com mail.example.tld 25
Connecting to mail.example.tld 25 ...
[1/4] Connecting to mail.example.tld:25 ...
[1/4] Waiting for banner ...
220 beta SMTP Server (JAMES SMTP Server 2.3.2) ready Wed, 22 Jan 2020 16:10:10 -0500 (EST)
[1/4] Sending greeting: HELO mydomain.com
[1/4] Waiting for greeting reply ...
250 beta Hello test (10.0.0.1 [10.0.0.1])
[1/4] Sending: MAIL FROM: [email protected]
[1/4] Waiting for MAIL FROM reply ...
501 5.1.7 Syntax error in MAIL command
[2/4] Waiting for MAIL FROM reply ...
[3/4] Waiting for MAIL FROM reply ...
[4/4] Waiting for MAIL FROM reply ...
timed out

So apparently the mailserver does not like our command: MAIL FROM: [email protected]. To circumvent this, let's put the from email in brackets like so: MAIL FROM: <[email protected]> via the -f argument:

$ smtp-user-enum -f '<[email protected]>' -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 Sender <[email protected]> OK
Start enumerating users with RCPT mode ...
[----] 4Dgifts           501 5.5.2 Syntax error in parameters or arguments
[----] EZsetup           501 5.5.2 Syntax error in parameters or arguments
[----] OutOfBox          501 5.5.2 Syntax error in parameters or arguments
[----] root              501 5.5.2 Syntax error in parameters or arguments

Looks like the usernames also need to be wrapped in < and > to satisfy this specific mailserver. To do this, simply add the -w option:

$ smtp-user-enum -w -f '<[email protected]>' -m RCPT -U /usr/share/wordlists/metasploit/unix_users.txt mail.example.tld 25

Connecting to mail.example.tld 25 ...
220 mail.example.tld ESMTP Sendmail 8.12.8/8.12.8; Wed, 22 Jan 2020 19:33:07 +0200
250 mail.example.tld Hello [10.0.0.1], pleased to meet you
250 2.1.0 Sender <[email protected]> OK
Start enumerating users with RCPT mode ...
[SUCC] 4Dgifts           250 2.1.5 Recipient <4Dgifts@localhost> OK
[SUCC] EZsetup           250 2.1.5 Recipient <EZsetup@localhost> OK
[SUCC] OutOfBox          250 2.1.5 Recipient <OutOfBox@localhost> OK
[SUCC] root              250 2.1.5 Recipient <root@localhost> OK
[SUCC] adm               250 2.1.5 Recipient <adm@localhost> OK
[SUCC] admin             250 2.1.5 Recipient <admin@localhost> OK
[SUCC] administrator     250 2.1.5 Recipient <administrator@localhost> OK
[SUCC] anon              250 2.1.5 Recipient <anon@localhost> OK
[SUCC] auditor           250 2.1.5 Recipient <auditor@localhost> OK

Unfortunately this yields to false positives again as it seems to be an open relay. However, lessons learned from this is to use the -V option in case of issues to troubleshoot what is going on. Maybe the open relay is another vector to hunt down.

👮 Mitigation

Now that you've seen how easy it could be to enumerate usernames on systems, you should ensure that your servers are hardened against this technique.

VRFY and EXPN

Postfix

On Postfix VRFY seems to be not disabled by default as shown by their documentation. It also looks like Postfix did not implement the EXPN command, so only VRFY needs to be disabled.

main.cf:

disable_vrfy_command = yes

Sendmail

On Sendmail you will have to adjust the privacy settings and reload its configuration afterwards in order to disable VRFY and EXPN.

sendmail.cf:

- O PrivacyOptions=
+ O PrivacyOptions=noexpn novrfy

or

- O PrivacyOptions=
+ O PrivacyOptions=goaway

Exim

On Exim you should check if those values have already been disabled and then disable them accordingly. For the EXPN directive, ensure to either comment it out or set it to localhost only.

exim.conf:

- smtp_verify = true
+ smtp_verify = false

- smtp_expn_hosts = ...
+ smtp_expn_hosts = localhost

RCPT TO

The RCPT TO command cannot be disabled without breaking a mail server. What you should do instead is to require authentication:

🔒 cytopia sec tools

Below is a list of sec tools and docs I am maintaining.

Name	Category	Language	Description
offsec	Documentation	Markdown	Offsec checklist, tools and examples
header-fuzz	Enumeration	Bash	Fuzz HTTP headers
smtp-user-enum	Enumeration	Python 2+3	SMTP users enumerator
urlbuster	Enumeration	Python 2+3	Mutable web directory fuzzer
pwncat	Pivoting	Python 2+3	Cross-platform netcat on steroids
badchars	Reverse Engineering	Python 2+3	Badchar generator
fuzza	Reverse Engineering	Python 2+3	TCP fuzzing tool

Contributing

See Contributing guidelines to help to improve this project.

❗ Disclaimer

This tool may be used for legal purposes only. Users take full responsibility for any actions performed using this tool. The author accepts no liability for damage caused by this tool. If these terms are not acceptable to you, then do not use this tool.

📄 License

MIT License

Name		Name	Last commit message	Last commit date
Latest commit History 35 Commits
.github/workflows		.github/workflows
.gitignore		.gitignore
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE.txt		LICENSE.txt
Makefile		Makefile
README.md		README.md
setup.cfg		setup.cfg
setup.py		setup.py
smtp-user-enum		smtp-user-enum

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

smtp-user-enum

🎉 Installation

⭐ Features

💻 Usage

😈 VRFY mode (default)

How does VRFY work

Successful VRFY enumeration

Failed VRFY enumeration

😈 EXPN mode

How does EXPN work

Successful EXPN enumeration

Failed EXPN enumeration

😈 RCPT mode

How does RCPT work

Successful RCPT enumeration

Troubleshooting EXPN enumeration

550 A valid address is required

450 Relaying temporarily denied

False positives

Investigating timeouts

👮 Mitigation

VRFY and EXPN

Postfix

Sendmail

Exim

RCPT TO

🔒 cytopia sec tools

Contributing

❗ Disclaimer

📄 License

About

Releases 1

Packages

Contributors 2

Languages

License

cytopia/smtp-user-enum

Folders and files

Latest commit

History

Repository files navigation

smtp-user-enum

🎉 Installation

⭐ Features

💻 Usage

😈 VRFY mode (default)

How does VRFY work

Successful VRFY enumeration

Failed VRFY enumeration

😈 EXPN mode

How does EXPN work

Successful EXPN enumeration

Failed EXPN enumeration

😈 RCPT mode

How does RCPT work

Successful RCPT enumeration

Troubleshooting EXPN enumeration

550 A valid address is required

450 Relaying temporarily denied

False positives

Investigating timeouts

👮 Mitigation

VRFY and EXPN

Postfix

Sendmail

Exim

RCPT TO

🔒 cytopia sec tools

Contributing

❗ Disclaimer

📄 License

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 1

Packages 0

Contributors 2

Languages

Packages