⚠️ This is currently a work-in-progress and it is incomplete. ⚠️

This document is not a step-by-step guide. Rather, it augments Corpnewt’s Vanilla Desktop Guide with hardware-specific tweaks.

My goal was to have an unmolested, vanilla macOS install with SIP enabled -- and so far, I have succeeded.

I have voluntarily reinstalled my macOS install several times to get practiced and test and document things. I publish this document to help others in my shoes. Feel free to ask me questions on Twitter, but make sure you've read corpnewt's guide, have some clue, and have already diligently Googled.

If you spot any errors or typos, let me know.

You will run into roadblocks. And everyone will give you their own advice. Most of it is awful. The hackintosh world is full of people that don't know what they are doing, but are all-too-eager to dish out advice and even error-ridden corrections. Stay away from Unibeast, Multibeast, Tonymacx86.com, random people, etc.

Do keep things as vanilla as possible. Make minimal changes from the default installation. Do not put any kexts or files in /S/L/E, /L/E, etc. Everything can go into your EFI partition. Make sure you understand the changes you are making.

• Here is my exact build on PCPartPicker.

• Intel i7-8700K CPU

• Sapphire RX 580 Nitro+ SE GPU

• ASUS Z390-I Gaming motherboard

• Samsung 970 EVO Plus NVMe SSD

• Fractal Design Define Nano S mini-ITX case

• Dell DW1560 Wi-F/Bluetooth Card ()

• Load Optimized Defaults
• If you're going to do virtualization, turn on VT and VMX, otherwise you can leave it off. Ignore the instructions that tell you to turn it off. It installs and works fine with them on.
• Set your Q-Fan Controls to Silent for that quiet Mac-like sound. For a while, I had a 2018 Mac Mini and I couldn't tell which machine was quieter.
• Don't mess with the iGPU or iGPU Multi-Monitor settings as suggested in some tutorials, it's pretty flakey on this motherboard. Use the NoVPA/WhateverGreen flags mentioned below.

Your motherboard comes with a very small Wi-Fi/Bluetooth m.2 card. It's a great card that works wonderfully in Windows 10. However, there are currently no macOS drivers for it. Your best option is the Dell DW 1560 Wi-Fi/Bluetooth card. You do not need any sort of daughterboard or converter board. It's a "simple" swap-out.

Buy it off a reputable seller on eBay and expect to pay between $35-$60, depending on the day. I bought mine from honeybee_technologies on eBay. They shipped it fast and I got it a few days after ordering.

Again, don't mess around, just buy the DW1560. I learned this the hard way. There are many different Broadcom cards that are compatible with macOS, but you need one that is the same form factor as the Intel card the motherboard comes with, otherwise you cannot fit the integral heatsink back over the ports. You need this heatsink in place.

Most cards are too tall. The motherboard's antenna connectors will not reach and the integral heat sink port cover will not fit back into place. If Wi-Fi and Bluetooth are important to you, just buy the Dell DW 1560. It will fit right in.

Note: If you have a 970 EVO, or a 970 EVO Pro, you're already fine. The following information is strictly for the newer 970 EVO Plus model!

Out of the box, your 970 EVO Plus SSD is probably going to be incompatible with macOS. You must apply the May 2019 firmware update before you begin the macOS installation procedure.

You can find more info and the firmware download link here: 970 EVO Plus Firmware ISO. If you get an error about the download limit being exceed, try refreshing after a couple minutes. It usually allows you to download after the second or third refresh.

TL;DR: Write the firmware upgrade ISO image to a USB stick and boot off it and follow the simple instructions. It only takes a minute or two.

• Follow Corpnewt’s Vanilla Desktop Guide. Be sure to follow each step closely and do not forget about the Coffee Lake section.

• After that, follow thenGitHub - corpnewt/USBMap instructions to get your USB ports working right. I have made my USBMap file available here. It should work for you if you have the exact same motherboard as me. Download it and copy it to /Volumes/EFI/CLOVER/ACPI/patched/.

I currently use the iMac18,3 system identifier. As of 10.14.5, I should probably use iMac19,something but what I have now works really well.

You should not need any more, or any less than this. The Airport* and Brcm* kexts are for the Dell DW1560, so you can skip those if you do not have this card.

Coming soon.

For whatever reason, macOS has a 15 port limit on USB ports. Each USB port counts as two ports. You need to map them appropriately for your motherboard.

You can follow the instructions for corpnewt's USBMap to get things working. The instructions look daunting, but just follow it step by step, it's not actually that hard.

If you have the same ASUS Z390-I Gaming motherboard as me, you probably can just download my SSDT-UIAC.aml file and throw it in your EFI/CLOVER/ACPI/patched folder and reboot.

1. Open config.plist in Clover Configurator

2. Navigate to RT Variables > CsrActivateConfig

3. Change CsrActivateConfig to appropriate value:

• Disable SIP: 0x67
• Enable SIP: 0x00

4. Reboot your Hackintosh to apply these changes.

There are a couple ways to fix this:

1. Enable a few settings in your UEFI with regard to the iGPU and iGPU Multi-Monitor. This was unreliable and troublesome for me, especially when dual booting between macOS and Windows.

2. Add a couple of boot arguments to your config.plist. This option replaces the NoVPAJPEG kernel extension. NoVPAJPEG was recently deprecated and its functionality was moved into WhateverGreen.

Now, you simply add shikigva=32 and shiki-id=Mac-7BA5B2D9E42DDD94 to your boot arguments in config.plist.

So, what does this do? Well, it tells this part of the OS that it is an iMac Pro and that it does not have an iGPU, only a discrete GPU and the system should use that. This does not change your SMBIOS stuff (the Mac model your hackintosh identifies as).

• AirDrop
• AirPods
• Continuity
• Sleep/shutdown
• Preview/Quick Look
• Metal
• Etc.

• Unlock with Apple Watch.
• Wi-Fi/Bluetooth FIXED! Bluetooth, Wi-Fi, AirDrop, AirPods, Continuity work wonderfully!
• I need a webcam for FaceTime.
• I don't know of anything else that doesn't work at this point.
• FileVault 2 - It's supposed to work. I'm not brave enough, yet. Soon.

WIP. Feel free to ask me questions on Twitter.

If you have to ask, just buy a Mac instead. You'll spend much more money and have much less expandability, but the safety and support you get with a Mac probably makes the price premium worth it.

Even though the hackintosh process has been much-streamlined as of late, it still involves quite a bit of tinkering.

If you like to tinker, then you might want to give it a try. You can build a rocket of a machine, jammed full of cheap storage for a fraction of the cost of an equivalent Mac. Prices for good 1 TB NVMe SSDs are approaching the $100 price point.