Example C++ implementation of a local proxy for the AWS IoT Secure Tunneling service

This library is licensed under the Apache 2.0 License.

This code enables tunneling of a single threaded TCP client / server socket interaction through the IoT Secure Tunneling service. The code is targeted to run on Linux, Windows (7+), and macOS. If your device does not meet these requirements it is still possible to implement the underlying protocol documented in the protocol guide.

• Docker 18+

./docker-build.sh

After the Docker build completes, run ./docker-run.sh to open a shell inside the container created in the previous step, or you can run ./docker-run.sh -p <port_number> to expose a port from the docker container. Here you can find both the localproxy and localproxytest binaries. Note that when the localproxy runs in source mode, it binds by default to localhost, If you want to access the localproxy from outside the container, make sure to use the option -b 0.0.0.0 when you run the localproxy from the container so that it binds to 0.0.0.0 since localhost can not be access from outside the container.

• C++ 14 compiler
• CMake 3.6+
• Development libraries required:
  • Boost 1.76
  • Protobuf 3.17.x
  • zlib 1.12.13+
  • OpenSSL 1.0+
  • Catch2 test framework
• Stage a dependency build directory and change directory into it:
  • mkdir dependencies
  • cd dependencies
• The next steps should start from this directory, and return back to it

Note: This step may be simpler to complete via a native software application manager.

Ubuntu example: sudo apt install zlibc

Fedora example: dnf install zlib

wget https://www.zlib.net/zlib-1.2.13.tar.gz -O /tmp/zlib-1.2.13.tar.gz
tar xzvf /tmp/zlib-1.2.13.tar.gz
cd zlib-1.2.13
./configure
make
sudo make install

wget https://boostorg.jfrog.io/artifactory/main/release/1.76.0/source/boost_1_76_0.tar.gz -O /tmp/boost.tar.gz
tar xzvf /tmp/boost.tar.gz
cd boost_1_76_0
./bootstrap.sh
sudo ./b2 install link=static

wget https://github.com/protocolbuffers/protobuf/releases/download/v3.17.3/protobuf-all-3.17.3.tar.gz -O /tmp/protobuf-all-3.17.3.tar.gz
tar xzvf /tmp/protobuf-all-3.17.3.tar.gz
cd protobuf-3.17.3
mkdir build
cd build
cmake ../cmake
make
sudo make install

We strongly recommend installing OpenSSL development libraries using your native platform package manager so the local proxy's integration with OpenSSL can use the platform's globally configured root CAs.

Ubuntu example: sudo apt install libssl-dev

Fedora example: dnf install openssl-devel

Source install example:

git clone https://github.com/openssl/openssl.git
cd openssl
git checkout OpenSSL_1_1_1-stable
./Configure linux-generic64
make depend
make all

Run the ./Configure command without any arguments to check the available platform configuration options and the documentation here: https://wiki.openssl.org/index.php/Compilation_and_Installation

git clone --branch v2.13.6 https://github.com/catchorg/Catch2.git
cd Catch2
mkdir build
cd build
cmake ../
make
sudo make install

git clone https://github.com/aws-samples/aws-iot-securetunneling-localproxy
cd aws-iot-securetunneling-localproxy
mkdir build
cd build
cmake ../
make

On successful build, there will be two binary executables located at 'bin/localproxy' and 'bin/localproxytest'. You may choose to run localproxytest to ensure your platform is working properly. From here on, copy or distribute the localproxy binary as you please. The same source code is used for both source mode and destination mode. Different binaries may be built if the source and destinations are on different platforms and/or architectures.

We recommend configuring your compiler to enable all security features relevant to your platform and use cases. For additional information about security-relevant compiler flags, see: https://www.owasp.org/index.php/C-Based_Toolchain_Hardening

CMake cross-compilation can be accomplished using the following general steps:

1. Acquire cross-compiler toolchain for your target platform
2. Create and configure system root (sysroot) for your target platform
3. Build and install dependencies into the sysroot of the target platform
   1. Consult each dependency's documentation for guidance on how to cross compile
4. Build the local proxy
5. Run the test executable (also built for your platform)

CMake can perform cross-compilation builds when it is given a toolchain file. Here is an example filename: raspberry_pi_3_b_plus.cmake.tc

set(CMAKE_SYSTEM_NAME Linux)
set(CMAKE_SYSTEM_PROCESSOR arm)

set(CMAKE_SYSROOT /home/fedora/cross_builds/sysroots/arm-unknown-linux-gnueabihf)

set(tools /home/fedora/x-tools/arm-unknown-linux-gnueabihf)
set(CMAKE_C_COMPILER ${tools}/bin/arm-unknown-linux-gnueabihf-gcc)
set(CMAKE_CXX_COMPILER ${tools}/bin/arm-unknown-linux-gnueabihf-g++)

set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)

To perform the cross-compilation build files run cmake ../ -DCMAKE_TOOLCHAIN_FILE=raspberry_pi_3_b_plus.cmake.tc && make from a build directory.

Helpful links:

• https://crosstool-ng.github.io/ - crosstool-NG makes it convenient to build a toolchain, acquire and configure a system root
• https://wiki.osdev.org/Target_Triplet - Consult this to understand your platform triplet

The response of OpenTunnel via the AWS IoT Secure Tunneling management API is acquisition of a pair of client access tokens to use to connect two local proxy clients to the ends of the tunnel. One token is designated for the source local proxy, and the other is for the destination. They must be supplied with the matching local proxy run mode argument, otherwise connecting to the service will fail. Additionally, the region parameter supplied to the local proxy must match the AWS region the tunnel was opened in. In a production configuration, delivery of one or both tokens and launching the local proxy process may be automated. The following sections describe how to run the local proxy on both ends of a tunnel.

V1 local proxy: local proxy uses Sec-WebSocket-Protocol aws.iot.securetunneling-1.0 when communicates with AWS IoT Tunneling Service.

V2 local proxy: local proxy uses Sec-WebSocket-Protocol aws.iot.securetunneling-2.0 when communicates with AWS IoT Tunneling Service.

Source local proxy: local proxy that runs in source mode.

Destination local proxy: local proxy that runs in destination mode.

Multi-port tunneling feature allows more than one stream multiplexed on same tunnel. This feature is only supported with V2 local proxy. If you have some devices that on V1 local proxy, some on V2 local proxy, simply upgrade the local proxy on the source device to V2 local proxy. When V2 local proxy talks to V1 local proxy, the backward compatibility is maintained. For more details, please refer to section backward compatibility

If you need to use multi-port tunneling feature, service ID is needed to start local proxy. A service identifier will be used as the new format to specify the source listening port or destination service when start local proxy. The identifier is like an alias for the source listening port or destination service. For the format requirement of service ID, please refer to AWS public doc services in DestinationConfig . There is no restriction on how this service ID should be named, as long as it can help uniquely identifying a connection or stream.

Example 1: SSH1

You can use the following format: protocol name + connection number. For example, if two SSH connections needed to be multiplexed over a tunnel , you can choose SSH1 and SSH2 as the service IDs.

Example 2: ae5957ef-d6e3-42a5-ba0c-edc667d2b3fb

You can use a UUID to uniquely identify a connection/stream.

Example 3: ip-172-31-6-23.us-west-2.compute.internal

You can use remote host name to uniquely identify a stream.

Destination local proxy is responsible for forwarding application data received from tunnel to destination service. For V1 local proxy, only 1 stream is allowed over the tunnel. With V2 local proxy, more than one streams can be transferred at the same time. For more details, please read section Multi-port tunneling feature support.

Example 1:

./localproxy -r us-east-1 -d localhost:3389 -t <destination_client_access_token>

This is an example command to run the local proxy in destination mode, on a tunnel created in us-east-1, and forward data packets received from the tunnel to a locally running application/service on port 3389.

Example 2:

./localproxy -r us-east-1 -d HTTP1=80,SSH1=22 -t <destination_client_access_token>

This is an example command to run the local proxy in destination mode, on a tunnel created in us-east-1, and forward:

• data packets belongs to service ID HTTP1 to a locally running application/service on port 80.
• data packets belongs to service ID SSH1 to a locally running application/service on port 22.

We recommend starting the destination application or server before starting the destination local proxy to ensure that when the local proxy attempts to connect to the destination port, it will succeed. When the local proxy starts in destination mode, it will first connect to the service, and then begin listening for a new connection request over the tunnel. Upon receiving a request, it will attempt to connect to the configured destination address and port. If successful, it will transmit data between the TCP connection and tunnel bi-directionally.

For a multiplexed tunnel, one connection drop or connect will not affect the other connections that share the same tunnel. All connections/streams in a multiplexed tunnel is independent.

Source local proxy is responsible for relaying application data to the tunnel. For V1 local proxy, only 1 stream is allowed over the tunnel. With V2 local proxy, more than one streams can be transferred at the same time. For more details, please read section Multi-port tunneling feature support.

Example 1:

./localproxy -r us-east-1 -s 3389 -t <source_client_access_token>

This is an example command to run the local proxy in source mode, on a tunnel created in us-east-1, waiting for a connection on port 3389.

Example 2:

./localproxy -r us-east-1 -s HTTP1=5555,SSH1=3333 -t <source_client_access_token>

This is an example command to run the local proxy in source mode, on a tunnel created in us-east-1,

• waiting for a connection on port 5555, for service ID HTTP1.
• waiting for a connection on port 3333, for service ID SSH1.

When the local proxy starts in source mode, it will first connect to the service, and then begin listening for a new connection on the specified port and bind address. While the local proxy is running, use the client application (e.g. RemoteDesktopClient, ssh client) to connect to the source local proxy's listening port. After accepting the TCP connection, the local proxy will forward the connection request over the tunnel and immediately transmit data the TCP connection data through the tunnel bidirectionally. Source mode can manage more than one connection/stream at a time, if V2 local proxy is used. If the established TCP connection is terminated for any reason, it will send a disconnect message over the tunnel so the service or server running on the other side can react appropriately. Similarly, if a notification that a disconnect happened on the other side is received by the source local proxy it will close the local TCP connection. Regardless of a local I/O failures, or if a notification of a disconnect comes from the tunnel, after the local TCP connection closes, it will begin listening again on the specified listen port and bind address.

• If a new connection request sent over the tunnel results in the remote (destination) side being unable to connect to a destination service, it will send a disconnect message back through the tunnel. The exact timing behavior of this depends on the TCP retry settings of the destination local proxy.
• For a multiplexed tunnel, one connection drop or connect will not affect the other connections that share the same tunnel. All connections/streams in a multiplexed tunnel is independent.

The local proxy process can be stopped using various methods:

• Sending a SIGTERM signal to the process
• Closing a tunnel explicitly via CloseTunnel API. This will result in the local proxy dropping the connection to the service and existing the process successfully.
• A tunnel expires after its lifetime expiry. This will result in the local proxy dropping the connection to the service and exiting the process successfully.

V2 local proxy is able to communicate with V1 local proxy if only one connection needs to be established over the tunnel. This means when you open a tunnel, no more than one service should be passed in the services list.

Example 1:

 aws iotsecuretunneling open-tunnel --destination-config thingName=foo,services=SSH1,SSH2

In this example, two service IDs are used (SSH1 and SSH2). Backward compatibility is NOT supported.

Example 2:

aws iotsecuretunneling open-tunnel --destination-config thingName=foo,services=SSH2

In this example, one service ID is used (SSH2). Backward compatibility is supported.

Example 3:

aws iotsecuretunneling open-tunnel 

In this example, no service ID is used. Backward compatibility is supported.

The local proxy relies on the HTTP tunneling mechanism described by the HTTP/1.1 specification. To comply with the specifications, your web proxy must allow devices to use the CONNECT method. For more details on how that works and how configure it properly, Please refer to "Configure local proxy for devices that use web proxy"

A likely issue with the local proxy running on Windows or macOS systems is the lack of native OpenSSL support and default configuration. This will prevent the local proxy from being able to properly perform TLS/SSL host verification with the service. To fix this, set up a certificate authority (CA) directory and direct the local proxy to use it via the --capath <dir> CLI argument:

1. Create a new folder or directory to store the root certificates that the local proxy can access. For example: D:\certs on Windows
2. Download Amazon CA certificates for server authentication from here: https://docs.aws.amazon.com/iot/latest/developerguide/server-authentication.html#server-authentication-certs
3. Utilize the 'c_rehash' script for Windows or 'openssl rehash' command for macOS. This script is part of the OpenSSL development toolset

• macOS: openssl rehash ./certs
• Windows example:

D:\lib\openssl>set OPENSSL=D:\lib\openssl\apps\openssl.exe

D:\lib\openssl>tools\c_rehash.pl D:\certs
Doing D:\certs

Note: c_rehash.pl script on Windows does not seem to cooperate with spaces in the path for the openssl.exe executable

After preparing this directory, point to it when running the local proxy with the -c [arg] option. Examples: * MacOSX: ./localproxy -r us-east-1 -s 3389 -c ./certs * Windows: .\localproxy.exe -r us-east-1 -s 3389 -c D:\certs

• Avoid using the -t argument to pass in the access token. We recommend setting the AWSIOT_TUNNEL_ACCESS_TOKEN environment variable to specify the client access token with the least visibility
• Run the local proxy executable with the least privileges in the OS or environment *
  • If your client application normally connects to a port less than 1024, this would normally require running the local proxy with admin privileges to listen on the same port. This can be avoided if the client application allows you to override the port to connect to. Choose any available port greater than 1024 for the source local proxy to listen to without administrator access. Then you may direct the client application to connect to that port. e.g. For connecting to a source local proxy with an SSH client, the local proxy can be run with -s 5000 and the SSH client should be run with -p 5000
• On devices with multiple network interfaces, use the -b argument to bind the TCP socket to a specific network address restricting the local proxy to only proxy connections on an intended network
• Consider running the local proxy on separate hosts, containers, sandboxes, chroot jail, or a virtualized environment

• After localproxy uses an access token, it will no longer be valid without an accompanying Client Token.
• You can revoke an existing token and get a new valid token by calling RotateTunnelAccessToken.
• Refer to the Developer Guide for troubleshooting connectivity issues that can be due to an invalid token.

• The client token is an added security layer to protect the tunnel by ensuring that only the agent that generated the client token can use a particular access token to connect to a tunnel.
• Only one client token value may be present in the request. Supplying multiple values will cause the handshake to fail.
• The client token is optional.
• The client token must be unique across all the open tunnels per AWS account
• It's recommended to use a UUID to generate the client token.
• The client token can be any string that matches the regex ^[a-zA-Z0-9-]{32,128}$
• If a client token is provided, then local proxy needs to pass the same client token for subsequent retries (This is yet to be implemented in the current version of local proxy)
• If a client token is not provided, then the access token will become invalid after a successful handshake, and localproxy won't be able to reconnect using the same access token.
• The Client Token may be passed using the -i argument from the command line or setting the AWSIOT_TUNNEL_CLIENT_TOKEN environment variable.

The local proxy uses IPv4 and IPv6 dynamically based on how addresses are specified directly by the user, or how are they resolved on the system. For example, if 'localhost' resolves to '127.0.0.1' then IPv4 will is being used to connect or as the listening address. If localhost resolves to '::1' then IPv6 will be used.

Note: Specifying any argument that normally accepts address:port will not work correctly if address is specified using an IPv6 address.

Note: Systems that support both IPv4 and IPv6 may cause connectivity confusion if explicit address/port combinations are not used with the local proxy, client application, or destination service. Each component may behave differently with respect to support IP stack and default behaviors. Listening on the local IPv4 interface 127.0.0.1 will not accept connection attempts to IPv6 loopback address ::1. To add further complexity, hostname resolution may hide that this is happening, and different tools may prefer different IP stacks. To help with this from the local proxy, use verbose logging on the local proxy (-v 6 CLI argument) to inspect how hostname resolution is happening and examine the address format being output.

Most command line arguments have both a long form preceded by a double dash -- and a short form preceded by a single dash - character. Some commands only have a long form. Any options specified via command line arguments override values specified in both the config file specification, and environment variables.

-h/--help Will show a help message and a short guide to all of the available CLI arguments to the console and cause it to exit immediately

-t/--access-token [argvalue] Specifies the client access token to use when connecting to the service. We do not recommend using this option as the client access token will appear in shell history or in process listings that show full commands and arguments and may unintentionally expose access to the tunnel. Use the environment variable or set the option via config input file instead. An access token value must be found supplied via one of those three methods.

-e/--proxy-endpoint [argvalue] Specifies an explicit endpoint to use to connect to the tunneling service. For some customers this may point to unique domain. You cannot specify this option and -r/--region together. Either this or --region is required

-r/--region [argvalue] Endpoint region where tunnel exists. You cannot specify this option and -e/--process-endpoint together. Either this or --proxy-endpoint is required

-s/--source-listen-port [argvalue] Start local proxy in source mode and sets the mappings between service identifier and listening port. For example: SSH1=5555 or 5555.

• It follows format serviceId1=port1, serviceId2=port2, ...
• If only one port is needed to start local proxy, service identifier is not needed. You can simply pass the port to be used, for example, 5555.
• SSH1=5555 means that local proxy will start listening requests on port 5555 for service ID SSH1.
• The value of service ID and how many service IDs are used needs to match with services in open tunnel call. For example:

  aws iotsecuretunneling open-tunnel --destination-config thingName=foo,services=SSH1,SSH2

  Then to start local proxy in source mode, need to use: -s SSH1=$port1,SSH2=$port2

-d/--destination-app [argvalue] Start local proxy in destination mode and sets the mappings between port and service identifier. For example: SSH1=5555 or 5555.

• It follows format serviceId1=endpoint1, serviceId2=endpoint2, ...
• Endpoint can be IP address:port , port or hostname:port.
• If only one port is needed to start local proxy, service ID is not needed. You can simply pass the port used, for example, 5555.
• An item of the mapping SSH1=5555 means that local proxy will forward data received from the tunnel to TCP port 5555 for service ID SSH1.
• The value of service ID and how many service IDs are used needs to match with services in open tunnel call. For example:

  aws iotsecuretunneling open-tunnel --destination-config thingName=foo,services=SSH1,SSH2

  Then to start local proxy in destination mode, need to use: -d SSH1=$port1,SSH2=$port2

-b/--local-bind-address [argvalue] Specifies the local bind address (network interface) to use for listening for new connections when running the local proxy in source mode, or the local bind address to use when reaching out to the destination service when running in destination mode

-c/--capath [argvalue] Specifies an additional directory path that contains root CAs used for SSL certificate verification when connecting to the service

-k/--no-ssl-host-verify Directs the local proxy to disable host verification when connecting to the service. This option should not be used in production configurations.

--export-default-settings [argvalue] Specifies a file to write out all of the default fine-grained settings used by the local proxy and exits immediately. This file can be modified, and supplied as input to --settings-json to run the local proxy with non-default fine-grained settings.

--settings-json [argvalue] Specifies a file to read fine-grained settings for the local proxy to use to override hard coded defaults. All of the settings need not be present. Settings that do not exist are ignored passively.

--config [argvalue] Specifies a file to read command line arguments from. Actual command line arguments will overwrite contents of file if present in both.

-v/--verbose [argvalue] Specifies the verbosity of the output. Value must be between 0-255, however meaningful values are between 0-6 where 0 = output off, 1 = fatal, 2 = error, 3 = warning, 4 = info [default], 5 = debug, 6 = trace. Any values greater than 6 will be treated the same trace level output.

-m/--mode [argvalue] Specifies the mode local proxy will run. Accepted values are: src, source, dst, destination.

--config-dir [argvalue] Specifies the configuration directory where service identifier mappings are configured. If this parameter is not specified, local proxy will read configuration files from default directory ./config, under the file path where localproxy binary are located.

A configuration file can be used to specify any or all of the CLI arguments. If an option is set via a config file and CLI argument, the CLI argument value overrides. Here is an example file named config.ini:

region = us-east-1
access-token = foobar
source-listen-port = 5000

Local proxy run command using this configuration: ./localproxy --config config.ini is equivalent to running the local proxy command ./localproxy -r us-east-1 -t foobar -s 5000

To illustrate composition between using a configuration file and actual CLI arguments you could have a config.ini file with the following contents:

capath = /opt/rootca
region = us-west-2
local-bind-address = ::1
source-listen-port = 6000

and a local proxy launch command ./localproxy --config config.ini -t foobar is equivalent to running the local proxy command ./localproxy -c /opt/rootca -r us-west-2 -b ::1 -s 6000 -t foobar

NOTE: Service ID mappings should be configured by using parameter --config-dir, not --config.

If you want to start local proxy on fixed ports, you can configure these mappings using configuration files. By default, local proxy will read from directory ./config, under the file path where localproxy binary are located. If you need to direct local proxy reads from specific file path, use parameter --config-dir to specify the full path of the configuration directory. You can put multiple files in this directory or organize them into the sub folders. Local proxy will read all the files in this directory and search for the port mapping needed for a tunnel connection.

NOTE: The configuration files will be read once when local proxy starts and will not be read again unless it is restarted.

File name: SSHSource.ini

Content example:

SSH1=3333
SSH2=5555

This example means:

• Service ID SSH1 is mapped to port 3333.
• Service ID SSH2 is mapped to port 5555.

Example configuration file on destination device: File name: SSHDestination.ini

Content example:

SSH1=22
SSH2=10.0.0.1:80

This example means:

• Service ID SSH1 is mapped to port 22.
• Service ID SSH2 is mapped to host with IP address 10.0.0.1, port 80.

There are a few environment variables that can set configuration options used by the local proxy. Environment variables have lowest priority in specifying options. Config and CLI arguments will always override them

• AWSIOT_TUNNEL_ACCESS_TOKEN - if present, specifies the access token for the local proxy to use
• AWSIOT_TUNNEL_ENDPOINT - if present, specifies the AWS IoT Secured Tunneling proxy endpoint. Leave out -e or --proxy-endpoint from CLI arg. Still mutually exclusive with specifying -r/--region and below environment variable
• AWSIOT_TUNNEL_REGION - if present, specifies the region the tunnel exists in. Allowing leaving out the -r CLI arg

There are additional fine-grained settings to control the behavior of the local proxy. These settings are unlikely to need to be changed, and unless necessary should be kept at their default values.

Running ./localproxy --export-default-settings lpsettings.json will produce a file named lpsettings.json containing the default values for all settings. Example contents:

{
    "tunneling": {
        "proxy": {
            "default_bind_address": "localhost",
            "message": {
                "data_length_size": "2",
                "max_payload_size": "64512",
                "max_size": "65536"
            },
            "tcp": {
                "connection_retry_count": "5",
                "connection_retry_delay_ms": "1000",
                "read_buffer_size": "131076"
            },
            "websocket": {
                "ping_period_ms": "5000",
                "retry_delay_ms": "2500",
                "connect_retry_count": "-1",
                "reconnect_on_data_error": "true",
                "subprotocol": "aws.iot.securetunneling-1.0",
                "max_frame_size": "131076",
                "write_buffer_size": "131076",
                "read_buffer_size": "131076"
            }
        }
    }
}

After making edits to lpsettings.json and saving the changes, the following command will run the local proxy with the modified settings: ./localproxy -r us-east-1 -t foobar -d localhost:22 --settings-json lpsettings.json.

default_bind_address Defines the default bind address used when the -b bind address command line argument or option is not present. Address may be a hostname or IP address

tunneling.proxy.tcp.connection_retry_count When a failure occurs while trying to establish a TCP connection in destination mode this is the number of consecutive connection attempts to make before sending a notification over the tunnel that the connection is closed. When running in source mode, this will be the number of consecutive attempts made to bind and listen on on the TCP socket. A value of -1 results in infinite retry

tunneling.proxy.tcp.connection_retry_delay_ms Defines how long to wait before executing a retry for TCP connection failures (source or destination mode) in milliseconds.

tunneling.proxy.websocket.ping_period_ms Defines the period (in milliseconds) between websocket pings to the AWS IoT Tunneling Service. These pings may be necessary to keep the connection alive.

tunneling.proxy.websocket.connect_retry_count When a failure occurs while trying to connect to the service outside of an HTTP 4xx response on the handshake it may be retried based on the value of this property. This is the number of consecutive attempts to make before failing and closing the local proxy. Any HTTP 4xx response code on handshake does not retry. A value of -1 results in infinite retry

tunneling.proxy.websocket.retry_delay_ms Defines how long to wait before executing another retry to connect to the service in milliseconds.

tunneling.proxy.websocket.reconnect_on_data_error Flag indicating whether or not to try to restablish connection to the service if an I/O, protocol handling, or message parsing errors occur.

tunneling.proxy.message.may_payload_size Defines the maximum data size allowed to be carried via a single tunnel message. The current protocol has a maximum value of 63kb (64512 bytes). Any two active peers communicating over the same tunnel must set this to the same value.

Follow instructions in here to build a local proxy on a windows environment.

If the tunnel multi-port feature is enabled, multiplexed tunnels have the same bandwidth limit as non-multiplexed tunnels. This limit is mentioned in AWS public doc section AWS IoT Secure Tunneling, row Maximum bandwidth per tunnel. The bandwidth for a multiplexed tunnel is the bandwidth consumed by all active streams that transfer data over the tunnel connection. If you need this limit increased, please reach out to AWS support and ask for a limit increase.

There are limits on the maximum streams that can be multiplexed on a tunnel connection. This limit is mentioned in AWS public doc section AWS IoT Secure Tunneling, row Maximum services per tunnel. If you need this limit increased, please reach out to AWS support and ask for a limit increase.

If more than one stream is transferred at the same time, local proxy will not load balance between these streams. If you have one stream that is dominating the bandwidth, the other streams sharing the same tunnel connection may see latency of data packet delivery.