Skip to content

NicoChiGu/openwrt-nanopik2-latest

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

68 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

NanopiK2 S905 Openwrt固件【维护中】

Releases Downloads Releases Date

固件包 内核版本 固件下载 状态
haiibo_PLUS stable
haiibo_PLUS flippy+
haiibo_PLUS flippy+o
暴躁老哥_高大全 flippy+ 手动构建
use ophub/amlogic-s9xxx-openwrt repository OPHUB/openwrt REPO
Kernel use ophub/kernel repository OPHUB/kernel REPO
use haiibo/OpenWrt repository haiibo REPO
use breakings/OpenWrt repository breakings REPO
使用 ophub/amlogic-s9xxx-openwrt 库
使用 haiibo/OpenWrt 库编译的Plus版进行打包
使用 breakings/OpenWrt 库编译的高大全进行打包
amlogic S905的NanopiK2未在ophub/amlogic-s9xxx-openwrt项目中|armbian已不再为NanopiK2维护
已经从代码中做了部分修改以达到NanopiK2可以正确被引导

NanopiK2 固件每周五拉取打包 【此库为Action自动编译上传】

固件分为 stable 和 flippy 和 flippy(+O) 三个内核 自行测试.

指定版本可自行下载安装内核OPHUB/kernel REPO

目前测试较为稳定固件(内核6.0.7)【Github下载】 | 【Onedrives直链】

开发板参数

SoC: Amlogic S905, Quad-core ARM [email protected], DVFS
GPU: Penta-core ARM Mali™-450
RAM: 2GB DDR3
Network Connectivity: 10/100/1000M (RTL8211F)
Wireless:802.11 b/g/n
Bluetooth:4.0 dual mode
Antenna: One onboard porcelain antenna shared by both WiFi and Bluetooth. One individual IPX interface.
IR: Onboard IR receiver
Audio: Via HDMI/Bluetooth
eMMC interface: eMMC socket
I2S: 7-Pin, 2.54mm pitch pin-header
SD: 1 x MicroSD slot
USB Host: 4 x USB 2.0 Host, standard type A
Micro USB: 1 x USB 2.0, OTG, power input and data transmission
HDMI: HDMI 2.0, Type-A. It supports 4K video
GPIO: 40-Pin, 2.54mm pitch pin-header including I2C, ADC, GPIO, UART, PWM, SPDIF and CVBS
Serial debug port: 4-Pin, 2.54mm pitch single-row pin-header
User Key: 1 x power key
LED: 1 x power LED and 1 x status LED
Power Interface: DC jack, MicroUSB
Power Supply: DC 5V/2A
PCB dimension: 56 x 85mm,6-layer, ENIG


更新可使用晶晨宝盒(优先备份)
  • 不保证完全无 BUG!

  • 不对任何因使用本固件所遭受的任何损失承担责任!

  • 如需联系-请致Telegram / Discord-(JackeyTERA#0668)


一些问题

或将 Docker => 设置 => DockerMan设置 => 允许访问端口 【设置为eth0】 //因单臂路由器不进行桥接网口时没有brlan这个东西

单臂路由防火墙=>'iptables -t nat -I POSTROUTING -j FULLCONENAT' 或进行VLAN设置