Retsnoop is a BPF-based tool for non-intrusive mass-tracing of Linux kernel¹ internals.

Retsnoop's main goal is to provide a flexible and ergonomic way to extract the exact information from the kernel that is useful to the user. At any given moment, a running kernel is doing many different things, across many different subsystems, and on many different cores. Extracting and reviewing all of the various logs, callstacks, tracepoints, etc across the whole kernel can be a very time consuming and burdensome task. Similarly, iteratively adding printk() statements requires long iteration cycles of recompiling, rebooting, and rerunning testcases. Retsnoop, on the other hand, allows users to achieve a much higher signal-to-noise ratio by allowing them to specify both the specific subset of kernel functions that they would like to monitor, as well as the types of information to be collected from those functions, all without requiring any kernel changes.

Retsnoop achieves its goal by low-overhead non-intrusive tracing of a collection of kernel functions, intercepting their entries and exits. Retsnoop's central concept is a user-specified set of kernel functions of interest. This allows retsnoop to capture high-relevance data by letting the user flexibly control a relevant subset of kernel functions. All other kernel functions are ignored and don't pollute captured data with irrelevant information.

Retsnoop also supports a set of additional filters for further restricting the context and conditions under which tracing data is captured, allowing to filter based on PID or process name, choose a subset of admissible errors returned from functions, or gate on function latencies.

Retsnoop supports three different and complementary modes.

The default stack trace mode succinctly points to the deepest function call stack that satisfies user conditions (e.g., an error returned from the syscall). It shows a sequence of function calls, the corresponding source code locations at each level of the stack, and emits latencies and returned results:

$ sudo ./retsnoop -e '*sys_bpf' -a ':kernel/bpf/*.c'
Receiving data...
20:19:36.372607 -> 20:19:36.372682 TID/PID 8346/8346 (simfail/simfail):

                    entry_SYSCALL_64_after_hwframe+0x63  (arch/x86/entry/entry_64.S:120:0)
                    do_syscall_64+0x35                   (arch/x86/entry/common.c:80:7)
                    . do_syscall_x64                     (arch/x86/entry/common.c:50:12)
    73us [-ENOMEM]  __x64_sys_bpf+0x1a                   (kernel/bpf/syscall.c:5067:1)
    70us [-ENOMEM]  __sys_bpf+0x38b                      (kernel/bpf/syscall.c:4947:9)
                    . map_create                         (kernel/bpf/syscall.c:1106:8)
                    . find_and_alloc_map                 (kernel/bpf/syscall.c:132:5)
!   50us [-ENOMEM]  array_map_alloc
!*   2us [NULL]     bpf_map_alloc_percpu
^C
Detaching... DONE in 251 ms.

The function call trace mode (-T) additionally provides a detailed trace of control flow across the given set of functions, allowing to understand the kernel behavior more comprehensively:

FUNCTION CALL TRACE                               RESULT                 DURATION
-----------------------------------------------   --------------------  ---------
→ bpf_prog_load
    → bpf_prog_alloc
        ↔ bpf_prog_alloc_no_stats                 [0xffffc9000031e000]    5.539us
    ← bpf_prog_alloc                              [0xffffc9000031e000]   10.265us
    [...]
    → bpf_prog_kallsyms_add
        ↔ bpf_ksym_add                            [void]                  2.046us
    ← bpf_prog_kallsyms_add                       [void]                  6.104us
← bpf_prog_load                                   [5]                   374.697us

Last, but not least, LBR mode (Last Branch Records) allows the user to "look back" and peek deeper into individual function's internals, trace "invisible" inlined functions, and pinpoint the problem all the way down to the individual C statements. This mode is especially great when tracing unfamiliar parts of the kernel without having a good idea what to even look for. It enables iterative discovery process without having much of an idea where to look and what functions are relevant:

$ sudo ./retsnoop -e '*sys_bpf' -a 'array_map_alloc_check' --lbr=any
Receiving data...
20:29:17.844718 -> 20:29:17.844749 TID/PID 2385333/2385333 (simfail/simfail):
...
[#22] ftrace_trampoline+0x14c                                    ->  array_map_alloc_check+0x5   (kernel/bpf/arraymap.c:53:20)
[#21] array_map_alloc_check+0x13  (kernel/bpf/arraymap.c:54:18)  ->  array_map_alloc_check+0x75  (kernel/bpf/arraymap.c:54:18)
      . bpf_map_attr_numa_node    (include/linux/bpf.h:1735:19)      . bpf_map_attr_numa_node    (include/linux/bpf.h:1735:19)
[#20] array_map_alloc_check+0x7a  (kernel/bpf/arraymap.c:54:18)  ->  array_map_alloc_check+0x18  (kernel/bpf/arraymap.c:57:5)
      . bpf_map_attr_numa_node    (include/linux/bpf.h:1735:19)
[#19] array_map_alloc_check+0x1d  (kernel/bpf/arraymap.c:57:5)   ->  array_map_alloc_check+0x6f  (kernel/bpf/arraymap.c:62:10)
[#18] array_map_alloc_check+0x74  (kernel/bpf/arraymap.c:79:1)   ->  __kretprobe_trampoline+0x0
...

Please also check out the companion blog post, "Tracing Linux kernel with retsnoop", which goes into more details about each mode and demonstrates retsnoop usage on a few examples inspired by the actual real-world problems.

NOTE: Retsnoop is utilizing the power of BPF technology and so requires root permissions, or a sufficient level of capabilities (CAP_BPF and CAP_PERFMON). Also note that despite all the safety guarantees of BPF technology and careful implementation, kernel tracing is inherently tricky and potentially disruptive to production workloads, so it's always recommended to test whatever you are trying to do on a non-production system as much as possible. Typical user-context kernel code (which is a majority of Linux kernel code) won't cause any problems, but tracing very low-level internals running in special kernel context (e.g., hard IRQ, NMI, etc) might need some care. Linux kernel itself normally protects itself from tracing such dangerous and sensitive parts, but kernel bugs do slip in sometimes, so please use your best judgement (and test, if possible).

NOTE: Retsnoop relies on BPF CO-RE technology, so please make sure your Linux kernel is built with CONFIG_DEBUG_INFO_BTF=y kernel config. Without this retsnoop will refuse to start.

This section provides a reference-style description of various retsnoop concepts and features for those who want to use the full power of retsnoop to their advantage. If you are new to retsnoop, consider checking "Tracing Linux kernel with retsnoop" blog post to familiarize yourself with the output format and see how the tool can be utilized in practice.

Retsnoop's operation is centered around tracing multiple functions. Functions are split into two categories: entry and non-entry (auxiliary) functions. Entry functions define a set of functions that activate retsnoop's recording logic. When any entry function is called for the first time, retsnoop starts tracking and recording all subsequent functions calls, until the entry function that triggered recording returns. Once recording is activated, both entry and non-entry functions are recorded in exactly the same way and are not distinguished between each other. Function calls within each thread are traced completely independently, so there could be multiple recordings going on at the same time simultaneously on multi-CPU systems.

So, in short, entry functions are recording triggers, while non-entry functions are augmenting recorded data with additional internal function calls, but only if those are called from an activated entry functions. If some non-entry function is called before the entry function is called, such a call is ignored by retsnoop. Such a split avoids low-signal spam such as recordings of common helper functions that happen outside of an interesting context of entry functions.

A set of functions is specified through:

• -e (--entry) argument(s), to specify a set of entry functions.
• -a (--allow) argument(s), to specify a set of non-entry functions. If any of the function in the non-entry set overlaps with the entry set, the entry set takes precedence.
• -d (--deny) argument(s), to exclude specified functions from both entry and non-entry sets. Functions that are denied are filtered out from both entry and non-entry subsets. Denylist always take precedence.

Each of -e, -a, and -d expect a value which could be of two forms:

• function name glob, similar to shell's file globs. E.g., *bpf* will match any function that has the "bpf" substring in its name. Only * and ? wildcards are supported, and they can be specified multiple times. * wildcard matches any sequence of characters (or none), and ? matches exactly one character. So foo?? will match foo10, but not foo1. You can also optionally add kernel module glob, in the form of <func-glob> [<module-glob>], to narrow down function search to only kernel modules matching specified glob pattern. E.g., *_read_* [*kvm*] would match vmx_read_guest_seg_ar from kvm_intel module, or segmented_read_std from kvm module. So, specifying * [kvm] is probably the easiest way to discover all the traceable functions in kvm module.
• source code path glob, prefixed with ':' (e.g., :kernel/bpf/*.c). Any function that is defined in a source file that matches specified file path glob is added to the match. Source code location has to be relative to the kernel repo root. So, :kernel/bpf/*.c will match any function defined in *.c files under Linux's kernel/bpf directory. All this, of course, relies on the kernel image file (vmlinux) being available in one of the standard places and having DWARF debug information in it. Note that retsnoop doesn't analyze source code itself and doesn't expect it to be present anywhere. All this information is supposed to be recorded in DWARF debug information.

Any of -e, -a, and -d can be specified multiple times and matched functions are concatenated within their category. This allows full flexibility in matching disparate subsets of functions that can't be expressed through one simple glob. Mixing function name globs and source code path globs are also supported.

All matched functions are additionally checked against a list of traceable functions, which the kernel reports in the /sys/kernel/debug/tracing/available_filter_functions file. If you don't see the expected function there, then most probably it's due to one of a few common reasons:

• function is inlined and as such isn't traceable directly; try to instead trace a non-inlined function that calls into the desired function or is called from it;
• function is in some way special and is not allowed to be traceable by the kernel itself (usually some low-level functions executed in restricted kernel contexts);
• function could be compiled out due to kernel config or is in a kernel module which isn't loaded at the time of tracing;
• sometimes function got renamed due to some compiler optimization, getting additional suffix like .isra.0 and similar; in such a case append '*' at the end to match such suffixes.

If in doubt whether you've specified the correct set of functions, use the --dry-run -v argument to do a verbose dry-run, in which retsnoop will report all the functions it discovered and will attempt to attach, but will stop short of actually attaching them. This is the best way to validate everything without any risk of interfering with the system's workload.

As mentioned above, by default retsnoop is capturing a stack trace, with the deepest nested function calls that satisfy conditions. E.g., if no custom error filters are specified, retsnoop will try to capture stack trace of a deepest function call chain resulting in the error return. See the stack trace mode example in the companion blog post for more details.

Retsnoop always captures and emits stack trace. Other modes (function call trace and LBR, described below) are complementary to the default stack trace mode and each other.

Providing -T (--trace) flag enables function call trace mode. In this mode, retsnoop will keep track of a detailed sequence of calls between each entry and non-entry function. Just like stack trace mode, this recording is activated only upon hitting an entry function and also satisfying any of the additional filtering conditions.

As mentioned above, this mode is complementing default stack trace mode, and, if enabled, LBR mode. It provides a different view of a captured function call sequence. Given it might be quite verbose and expensive to record, depending on the specific workload and a set of functions of interest, it requires explicit opt-in with a -T argument.

This mode is perfect for understanding kernel behavior in details, especially unfamiliar parts of it. See the function call trace mode example in the companion blog post for more details.

LBR (Last Branch Records) is an Intel CPU feature that allows users to instruct the CPU to record the last N calls/returns/jumps (what exactly is captured is configurable) constantly with no overhead. The number of captured records depends on the generation of CPU and is typically in 8 to 32 range. In recent enough Linux kernel (v5.16+) it's possible to capture such LBRs from a BPF program in ad-hoc fashion, which is utilized by retsnoop in the LBR mode. Some non-Intel CPUs have a similar capabilities, which are abstracted away by the kernel's perf subsystem, so you don't necessarily need Intel CPUs to take advantage of it with retsnoop.

So when is LBR mode useful? There are a few typical scenarios.

One of them is when you are investigating some generic error being returned from the kernel. The kernel can return errors in various different cases and it's not clear which one it is. This is often the case with bpf() syscall, for example, where errors like -EINVAL can be returned due to dozens of various error conditions, and a bunch of such conditions could be checked within the same big function. Debugging exactly which error condition is hit can be maddening at times. LBR mode allows users to get insight into which exact if condition within the function returned an error.

Another common scenario is when you are trying to trace a completely unfamiliar part of Linux kernel code. You might know the entry function, but have no clue what other functions it calls and where in the source code they are defined. E.g., a common case would be an entry function that calls into generic callback and it's not clear where the callback function is actually defined. In such cases it's very hard to know which function name globs or source code path globs to specify, as there could be lots of possible implementations of such callbacks. LBR mode can help here because it doesn't require tracing relevant functions to discover them.

No matter what circumstances call for LBR mode, it can be activated by using -R (--lbr) argument. Similar to the function call trace mode, LBR mode is independent and complimentary to the default stack trace and function call trace modes. When the right conditions happen, retsnoop captures LBR data, in addition to stack trace and other information, and then outputs data in its own format.

See the LBR mode example in the companion blog post for more details.

Here we'll just note that LBR mode allows customizing what kind of records the CPU is instructed to record. It can be one of the following values: any, any_call, any_return (default), cond, call, ind_call, ind_jump, call_stack, abort_tx, in_tx, no_tx. See Linux's perf_event.h UAPI header and its enum perf_branch_sample_type_shift's comments for brief descriptions of each of those modes.

By default, retsnoop assumes any_return LBR configuration, which records the last N returns from functions. This is very useful for the second type of cases when we want to know which functions are being called without having to study code thoroughly. The LBR stack will point to functions called before the deepest explicitly traced by retsnoop function was called, even if they weren't part of entry/non-entry set of functions. So you can keep iterating with retsnoop and expanding entry/non-entry function sets this way.

For the first class of scenarios (complicated functions with multiple error conditions), LBR config any might be more appropriate. It records any function calls, returns, and jumps, both conditional and unconditional. It might help pinpoint the exact statement within a single big function that is returning an error, as it's not bound to function boundaries.

Note that LBR is a tricky business and it might not capture enough relevant details or sometimes it capture irrelevant details. If the latter is the case, you can trim it down with --lbr-max-count argument to emit specified number of most relevant entries.

By default, retsnoop records any function call traces (based on entry and non-entry function sets) that result in a triggered entry function returning an error. The "error return" is defined heuristically and is either NULL for pointer-returning functions or -Exxx small negative error for integer returning ones. This can be further adjusted, as you'll see below. But such function traces are collected globally across any process, which might be inconvenient and lead to irrelevant "spam" in output.

Fortunately, retsnoop allows the user to adjust conditions under which it captures traces.

-S (--success-stacks) forces retsnoop to capture any function trace, disabling the default logic of capturing only error-returning cases. If you don't see retsnoop capturing stack traces or recording function call traces that you are sure are happening inside the kernel, check if you need to enable the successful stack traces capture with -S.

retsnoop also allows the user to fine-tune which return results are considered to be erroneous with -x (--allow-errors) and -X (--deny-errors) arguments. They expect either Exxx/-Exxx symbolic error codes (you can find all errors recognized by retsnoop in this table) or NULL.

These arguments can be specified multiple times and all errors are concatenated into a single list. The error denylist (-X) takes precedence, so if there is an overlap between -x and -X, -X wins and the specified error will be ignored, even if it is allowed by -x argument.

If no -x is provided, all supported errors are assumed to be allowed, except those denied by -X.

retsnoop allows the user to narrow down a set of processes in the context of which data will be captured. These filters are invaluable on busy production hosts that have a lot of things going on at the same time, but you need to investigate something happening only within a small subset of processes.

-p (--pid) and -P (--no-pid) allows filtering based on process ID (PID). Just as with most other arguments like this, you can specify them multiple times to combine multiple PID filters.

-n (--comm) and -N (--no-comm) allows the user to filter by process/thread names, in addition to or instead of PID filtering. Can be specified multiple times as well.

-L (--longer) allows the user to specify the minimal duration of a triggering entry function execution that will be captured and reported, skipping everything that completed sooner. This argument should be a positive number in units of milliseconds.

If you need to investigate latency issues, this filter allows the user to ignore irrelevant fast-completing function calls and instead trace slow ones in a more focused way.

retsnoop supports various levels of "verboseness". By default it doesn't emit any extra information about what it's doing and which functions it's going to trace. The default verbose level (-v) provides a good list of high-signal verbose output to understand what's going on under the cover. With -v retsnoop will report a list of discovered functions, where the kernel image is located, etc. retsnoop also has more verbose levels (-vv and -vvv), but they most probably are only useful for developers of retsnoop and for debugging.

The default verbose output is extremely useful in combination with dry-run mode, activated with --dry-run argument. In this mode retsnoop will report all the actions it's going to perform (including listing which functions it discovered and is going to trace), but stops short of actually activating any of that. This way there is not even a chance to disturb production workload and it's a safe way to pre-check everything upfront.

-V (--version) will print retsnoop's version. If combined with -v, retsnoop will also output all the detected kernel features that it relies on. You'll need to run retsnoop under root or with CAP_BPF and CAP_PERFMON capabilities for feature detection to work. You should see something like below:

$ sudo ./retsnoop -Vv
retsnoop v0.9.1
Feature detection:
        BPF ringbuf map supported: yes
        bpf_get_func_ip() supported: yes
        bpf_get_branch_snapshot() supported: yes
        BPF cookie supported: yes
        multi-attach kprobe supported: no
Feature calibration:
        kretprobe IP offset: 8
        fexit sleep fix: yes
        fentry re-entry protection: yes

retsnoop tries to provide as accurate and full function and stack trace information as possible. If Linux kernel image can be found in the system in one of the standard locations and it contains DWARF type information, this will be used to augment captured stack traces with information about source code location and inline functions. Using DWARF information adds a bit of extra CPU overhead, so this behavior and related parameters can be tuned.

If retsnoop fails to find the kernel image in the standard location, it can be pointed to a custom location through the -k (--kernel) argument.

-s (--symbolize) allows the user to tune stack symbolization behavior. Specify -sn to disable extra DWARF-based symbolization. In such case retsnoop will stick to a basic symbolization based on /proc/kallsyms data. -s alone will try to get source code location information, but won't attempt to symbolize inline functions. -ss allows both inlined functions and source code information. This is a default mode, if kernel with DWARF information is found, due to its extreme usefulness in most of the cases.

Note, DWARF type information is also necessary for source code path globs to work.

Each release has a pre-built retsnoop binary for x86-64 (amd64) architecture ready to be downloaded and used. Go to "Releases" page to download latest binary.

It's also pretty straightforward to build retsnoop from the sources. Most of retsnoop's dependencies are already included:

• libbpf is checked out as a submodule, built and statically linked automatically by retsnoop's Makefile;
• the only runtime libraries (beyond libc) is libelf and zlib, you'll also need development versions of them (for API headers) to compile libbpf;
• retsnoop pre-packages x86-64 versions of necessary tooling (bpftool required during the build, but this can be improved if there is an interest in retsnoop on non-x86 architecture (please open an issue to request);
• the largest external depenency is Clang compiler with support for bpf target. Try to use at least Clang 11+, but the latest Clang version you can get, the better.

Once dependencies are satisfied, the rest is simple:

$ make -C src

You'll get retsnoop binary under src/ folder. You can copy it to a production server and run it. There are no extra files that need to be distributed besides the main retsnoop executable.

Retsnoop started to be packaged by distros. Table below will point out which distros package retsnoop and at which verison.