Internet Engineering Task Force (IETF) M. Nottingham Request for Comments: 8615 May 2019 Obsoletes: 5785 Updates: 7230, 7595 Category: Standards Track ISSN: 2070-1721 Well-Known Uniform Resource Identifiers (URIs) Abstract This memo defines a path prefix for "well-known locations", "/.well-known/", in selected Uniform Resource Identifier (URI) schemes. In doing so, it obsoletes RFC 5785 and updates the URI schemes defined in RFC 7230 to reserve that space. It also updates RFC 7595 to track URI schemes that support well-known URIs in their registry. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8615. Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Nottingham Standards Track [Page 1]
RFC 8615 Well-Known URIs May 2019 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Notational Conventions . . . . . . . . . . . . . . . . . . . 3 3. Well-Known URIs . . . . . . . . . . . . . . . . . . . . . . . 3 3.1. Registering Well-Known URIs . . . . . . . . . . . . . . . 4 4. Security Considerations . . . . . . . . . . . . . . . . . . . 5 4.1. Protecting Well-Known Resources . . . . . . . . . . . . . 6 4.2. Interaction with Web Browsing . . . . . . . . . . . . . . 6 4.3. Scoping Applications . . . . . . . . . . . . . . . . . . 7 4.4. Hidden Capabilities . . . . . . . . . . . . . . . . . . . 8 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8 5.1. The Well-Known URI Registry . . . . . . . . . . . . . . . 8 5.2. The Uniform Resource Identifier (URI) Schemes Registry . 9 6. References . . . . . . . . . . . . . . . . . . . . . . . . . 9 6.1. Normative References . . . . . . . . . . . . . . . . . . 9 6.2. Informative References . . . . . . . . . . . . . . . . . 10 Appendix A. Frequently Asked Questions . . . . . . . . . . . . . 12 Appendix B. Changes from RFC 5785 . . . . . . . . . . . . . . . 12 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 12 1. Introduction Some applications on the Web require the discovery of information about an origin [RFC6454] (sometimes called "site-wide metadata") before making a request. For example, the Robots Exclusion Protocol (http://www.robotstxt.org) specifies a way for automated processes to obtain permission to access resources; likewise, the Platform for Privacy Preferences [P3P] tells user agents how to discover privacy policy before interacting with an origin server. While there are several ways to access per-resource metadata (e.g., HTTP header fields, PROPFIND in Web Distributed Authoring and Versioning (WebDAV) [RFC4918]), the perceived overhead (either in terms of client-perceived latency and/or deployment difficulties) associated with them often precludes their use in these scenarios. At the same time, it has become more popular to use HTTP as a substrate for non-Web protocols. Sometimes, such protocols need a way to locate one or more resources on a given host. When this happens, one solution is to designate a "well-known location" for data or services related to the origin overall, so that it can be easily located. However, this approach has the drawback of risking collisions, both with other such designated "well-known locations" and with resources that the origin has created (or wishes to create). Furthermore, defining well-known locations usurps the origin's control over its own URI space [RFC7320]. Nottingham Standards Track [Page 2]
RFC 8615 Well-Known URIs May 2019 To address these uses, this memo reserves a path prefix in HTTP, HTTPS, WebSocket (WS), and Secure WebSocket (WSS) URIs for these "well-known locations", "/.well-known/". Future specifications that need to define a resource for such metadata can register their use to avoid collisions and minimise impingement upon origins' URI space. Well-known URIs can also be used with other URI schemes, but only when those schemes' definitions explicitly allow it. 2. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 3. Well-Known URIs A well-known URI is a URI [RFC3986] whose path component begins with the characters "/.well-known/", provided that the scheme is explicitly defined to support well-known URIs. For example, if an application registers the name 'example', the corresponding well-known URI on 'http://www.example.com/' would be 'http://www.example.com/.well-known/example'. This specification updates the "http" [RFC7230] and "https" [RFC7230] schemes to support well-known URIs. Other existing schemes can use the appropriate process for updating their definitions; for example, [RFC8307] does so for the "ws" and "wss" schemes. The "Uniform Resource Identifier (URI) Schemes" registry tracks which schemes support well-known URIs; see Section 5.2. Applications that wish to mint new well-known URIs MUST register them, following the procedures in Section 5.1, subject to the following requirements. Registered names MUST conform to the "segment-nz" production in [RFC3986]. This means they cannot contain the "/" character. Registered names for a specific application SHOULD be correspondingly precise; "squatting" on generic terms is not encouraged. For example, if the Example application wants a well-known location for metadata, an appropriate registered name might be "example-metadata" or even "example.com-metadata", not "metadata". Nottingham Standards Track [Page 3]
RFC 8615 Well-Known URIs May 2019 At a minimum, a registration will reference a specification that defines the format and associated media type(s) to be obtained by dereferencing the well-known URI, along with the URI scheme(s) that the well-known URI can be used with. If no URI schemes are explicitly specified, "http" and "https" are assumed. Typically, applications will use the default port for the given scheme; if an alternative port is used, it MUST be explicitly specified by the application in question. Registrations MAY also contain additional information, such as the syntax of additional path components, query strings, and/or fragment identifiers to be appended to the well-known URI, or protocol- specific details (e.g., HTTP [RFC7231] method handling). Note that this specification defines neither how to determine the hostname to use to find the well-known URI for a particular application, nor the scope of the metadata discovered by dereferencing the well-known URI; both should be defined by the application itself. Also, this specification does not define a format or media type for the resource located at "/.well-known/", and clients should not expect a resource to exist at that location. Well-known URIs are rooted in the top of the path's hierarchy; they are not well-known by definition in other parts of the path. For example, "/.well-known/example" is a well-known URI, whereas "/foo/.well-known/example" is not. See also Section 4 for Security Considerations regarding well-known locations. 3.1. Registering Well-Known URIs The "Well-Known URIs" registry is located at <https://www.iana.org/assignments/well-known-uris/>. Registration requests can be made by following the instructions located there or by sending an email to the <[email protected]> mailing list. Registration requests consist of at least the following information: URI suffix: The name requested for the well-known URI, relative to "/.well-known/"; e.g., "example". Nottingham Standards Track [Page 4]
RFC 8615 Well-Known URIs May 2019 Change controller: For Standards Track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., email address, home page URI) may also be included. Specification document(s): Reference to the document that specifies the field, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required. Status: One of "permanent" or "provisional". See guidance below. Related information: Optionally, citations to additional documents containing further relevant information. General requirements for registered values are described in Section 3. Values defined by Standards Track RFCs and other open standards (in the sense of [RFC2026], Section 7.1.1) have a status of "permanent". Other values can also be registered as permanent, if the experts find that they are in use, in consultation with the community. Other values should be registered as "provisional". Provisional entries can be removed by the experts if -- in consultation with the community -- the experts find that they are not in use. The experts can change a provisional entry's status to permanent; in doing so, the experts should consider how widely used a value is and consult the community beforehand. Note that "consult the community" above refers to those responsible for the URI scheme(s) in question. Generally, this would take place on the mailing list(s) of the appropriate Working Group(s) (possibly concluded), or on <[email protected]> if no such list exists. Well-known URIs can be registered by third parties (including the expert(s)), if the expert(s) determine that an unregistered well- known URI is widely deployed and not likely to be registered in a timely manner otherwise. Such registrations still are subject to the requirements defined, including the need to reference a specification. 4. Security Considerations Applications minting new well-known URIs, as well as administrators deploying them, will need to consider several security-related issues, including (but not limited to) exposure of sensitive data, denial-of-service attacks (in addition to normal load issues), server Nottingham Standards Track [Page 5]
RFC 8615 Well-Known URIs May 2019 and client authentication, vulnerability to DNS rebinding attacks, and attacks where limited access to a server grants the ability to affect how well-known URIs are served. [RFC3552] contains some examples of potential security considerations that may be relevant to application protocols and administrators deploying them. 4.1. Protecting Well-Known Resources Because well-known locations effectively represent the entire origin, server operators should appropriately control the ability to write to them. This is especially true when more than one entity is co-located on the same origin. Even for origins that are controlled by and represent a single entity, due care should be taken to assure that write access to well-known locations is not granted unwittingly, either externally through server configuration or locally through implementation permissions (e.g., on a filesystem). 4.2. Interaction with Web Browsing Applications using well-known URIs for "http" or "https" URLs need to be aware that well-known resources will be accessible to Web browsers, and therefore are able to be manipulated by content obtained from other parts of that origin. If an attacker is able to inject content (e.g., through a Cross-Site Scripting vulnerability), they will be able to make potentially arbitrary requests to the well- known resource. HTTP and HTTPS also use origins as a security boundary for many other mechanisms, including (but not limited to) cookies [RFC6265], Web Storage [WEBSTORAGE], and various capabilities. An application that defines well-known locations should not assume that it has sole access to these mechanisms or that it is the only application using the origin. Depending on the nature of the application, mitigations can include: o Encrypting sensitive information o Allowing flexibility in the use of identifiers (e.g., cookie names) to avoid collisions with other applications o Using the 'HttpOnly' flag on cookies to assure that cookies are not exposed to browser scripting languages [RFC6265] o Using the 'Path' parameter on cookies to assure that they are not available to other parts of the origin [RFC6265] Nottingham Standards Track [Page 6]
RFC 8615 Well-Known URIs May 2019 o Using X-Content-Type-Options: nosniff [FETCH] to assure that content under attacker control can't be coaxed into a form that is interpreted as active content by a Web browser Other good practices include: o Using an application-specific media type in the Content-Type header field, and requiring clients to fail if it is not used o Using Content-Security-Policy [CSP] to constrain the capabilities of active content (such as HTML [HTML5]), thereby mitigating Cross-Site Scripting attacks o Using Referrer-Policy [REFERRER-POLICY] to prevent sensitive data in URLs from being leaked in the Referer request header field o Avoiding use of compression on any sensitive information (e.g., authentication tokens, passwords), as the scripting environment offered by Web browsers allows an attacker to repeatedly probe the compression space; if the attacker has access to the path of the communication, they can use this capability to recover that information. 4.3. Scoping Applications This memo does not specify the scope of applicability for the information obtained from a well-known URI, and does not specify how to discover a well-known URI for a particular application. Individual applications using this mechanism must define both aspects; if this is not specified, security issues can arise from implementation deviations and confusion about boundaries between applications. Applying metadata discovered in a well-known URI to resources other than those co-located on the same origin risks administrative as well as security issues. For example, allowing "https://example.com/.well-known/example" to apply policy to "https://department.example.com", "https://www.example.com", or even "https://www.example.com:8000" assumes a relationship between hosts where there might be none, thereby giving control to a potential attacker. Likewise, specifying that a well-known URI on a particular hostname is to be used to bootstrap a protocol can cause a large number of undesired requests. For example, if a well-known HTTPS URI is used to find policy about a separate service such as email, it can result Nottingham Standards Track [Page 7]
RFC 8615 Well-Known URIs May 2019 in a flood of requests to Web servers, even if they don't implement the well-known URI. Such undesired requests can resemble a denial- of-service attack. 4.4. Hidden Capabilities Applications using well-known locations should consider that some server administrators might be unaware of their existence (especially on operating systems that hide directories whose names begin with "."). This means that if an attacker has write access to the .well-known directory, they would be able to control its contents, possibly without the administrator realising it. 5. IANA Considerations 5.1. The Well-Known URI Registry This specification updates the registration procedures for the "Well- Known URI" registry, first defined in [RFC5785]; see Section 3.1. Well-known URIs are registered on the advice of one or more experts, with a Specification Required (using terminology from [RFC8126]). The experts' primary considerations in evaluating registration requests are: o Conformance to the requirements in Section 3 o The availability and stability of the specifying document o The considerations outlined in Section 4 IANA will direct the senders of any incoming registry requests to this document and, if defined, the processes established by the expert(s); typically, this will mean referring them to the registry Web page. Per this document, IANA has: o Updated the registration procedure to Specification Required. o Added a "Status" column to the registry and marked all of the existing registrations as "permanent". Nottingham Standards Track [Page 8]
RFC 8615 Well-Known URIs May 2019 5.2. The Uniform Resource Identifier (URI) Schemes Registry This specification adds a field to the registration template of the "Uniform Resource Identifier (URI) Schemes" registry, with the name "Well-Known URI Support" and a default value of "-". If a URI scheme explicitly has been specified to use well-known URIs as per Section 3, the value changes to a reference to that specification. Initial values not equal to "-" are given in Table 1. +------------+------------------------+ | URI Scheme | Well-Known URI Support | +------------+------------------------+ | coap | [RFC7252] | | coap+tcp | [RFC8323] | | coap+ws | [RFC8323] | | coaps | [RFC7252] | | coaps+tcp | [RFC8323] | | coaps+ws | [RFC8323] | | http | [RFC8615] | | https | [RFC8615] | | ws | [RFC8307] | | wss | [RFC8307] | +------------+------------------------+ Table 1: Rows in URI Scheme Registry with Nonempty New Column 6. References 6.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, <https://www.rfc-editor.org/info/rfc3986>. [RFC6454] Barth, A., "The Web Origin Concept", RFC 6454, DOI 10.17487/RFC6454, December 2011, <https://www.rfc-editor.org/info/rfc6454>. Nottingham Standards Track [Page 9]
RFC 8615 Well-Known URIs May 2019 [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing", RFC 7230, DOI 10.17487/RFC7230, June 2014, <https://www.rfc-editor.org/info/rfc7230>. [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, <https://www.rfc-editor.org/info/rfc8126>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>. 6.2. Informative References [CSP] West, M., "Content Security Policy Level 3", World Wide Web Consortium WD WD-CSP3-20160913, September 2016, <https://www.w3.org/TR/2016/WD-CSP3-20160913>. [FETCH] WHATWG, "Fetch - Living Standard", <https://fetch.spec.whatwg.org>. [HTML5] WHATWG, "HTML - Living Standard", <https://html.spec.whatwg.org>. [P3P] Marchiori, M., "The Platform for Privacy Preferences 1.0 (P3P1.0) Specification", World Wide Web Consortium Recommendation REC-P3P-20020416, April 2002, <http://www.w3.org/TR/2002/REC-P3P-20020416>. [REFERRER-POLICY] Eisinger, J. and E. Stark, "Referrer Policy", World Wide Web Consortium CR CR-referrer-policy-20170126, January 2017, <https://www.w3.org/TR/2017/CR-referrer-policy-20170126>. [RFC2026] Bradner, S., "The Internet Standards Process -- Revision 3", BCP 9, RFC 2026, DOI 10.17487/RFC2026, October 1996, <https://www.rfc-editor.org/info/rfc2026>. [RFC3552] Rescorla, E. and B. Korver, "Guidelines for Writing RFC Text on Security Considerations", BCP 72, RFC 3552, DOI 10.17487/RFC3552, July 2003, <https://www.rfc-editor.org/info/rfc3552>. Nottingham Standards Track [Page 10]
RFC 8615 Well-Known URIs May 2019 [RFC4918] Dusseault, L., Ed., "HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)", RFC 4918, DOI 10.17487/RFC4918, June 2007, <https://www.rfc-editor.org/info/rfc4918>. [RFC5785] Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known Uniform Resource Identifiers (URIs)", RFC 5785, DOI 10.17487/RFC5785, April 2010, <https://www.rfc-editor.org/info/rfc5785>. [RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265, DOI 10.17487/RFC6265, April 2011, <https://www.rfc-editor.org/info/rfc6265>. [RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", RFC 7231, DOI 10.17487/RFC7231, June 2014, <https://www.rfc-editor.org/info/rfc7231>. [RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained Application Protocol (CoAP)", RFC 7252, DOI 10.17487/RFC7252, June 2014, <https://www.rfc-editor.org/info/rfc7252>. [RFC7320] Nottingham, M., "URI Design and Ownership", BCP 190, RFC 7320, DOI 10.17487/RFC7320, July 2014, <https://www.rfc-editor.org/info/rfc7320>. [RFC8307] Bormann, C., "Well-Known URIs for the WebSocket Protocol", RFC 8307, DOI 10.17487/RFC8307, January 2018, <https://www.rfc-editor.org/info/rfc8307>. [RFC8323] Bormann, C., Lemay, S., Tschofenig, H., Hartke, K., Silverajan, B., and B. Raymor, Ed., "CoAP (Constrained Application Protocol) over TCP, TLS, and WebSockets", RFC 8323, DOI 10.17487/RFC8323, February 2018, <https://www.rfc-editor.org/info/rfc8323>. [WEBSTORAGE] Hickson, I., "Web Storage (Second Edition)", World Wide Web Consortium Recommendation REC-webstorage-20160419, April 2016, <http://www.w3.org/TR/2016/REC-webstorage-20160419>. Nottingham Standards Track [Page 11]
RFC 8615 Well-Known URIs May 2019 Appendix A. Frequently Asked Questions Aren't well-known locations bad for the Web? They are, but for various reasons -- both technical and social -- they are sometimes necessary. This memo defines a "sandbox" for them, to reduce the risks of collision and to minimise the impact upon preexisting URIs on sites. Why "/.well-known?" It's short, descriptive, and according to search indices, not widely used. What impact does this have on existing mechanisms, such as P3P and robots.txt? None, until they choose to use this mechanism. Why aren't per-directory well-known locations defined? Allowing every URI path segment to have a well-known location (e.g., "/images/.well-known/") would increase the risks of colliding with a preexisting URI on a site, and generally these solutions are found not to scale well because they're too "chatty". Appendix B. Changes from RFC 5785 o Allowed non-Web well-known locations o Adjusted IANA instructions o Updated references o Made various other clarifications o Tracked supporting schemes in the "Uniform Resource Identifier (URI) Schemes" registry Author's Address Mark Nottingham Email: [email protected] URI: https://www.mnot.net/ Nottingham Standards Track [Page 12]
