REST Resource: projects.locations.jobs

string

Optionally caller-specified in jobs.create, after which it becomes output only.

The job name. For example: projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID.

• PROJECT_ID can contain letters ([A-Za-z]), numbers ([0-9]), hyphens (-), colons (:), or periods (.). For more information, see Identifying projects
• LOCATION_ID is the canonical ID for the job's location. The list of available locations can be obtained by calling locations.list. For more information, see https://cloud.google.com/about/locations/.
• JOB_ID can contain only letters ([A-Za-z]), numbers ([0-9]), hyphens (-), or underscores (_). The maximum length is 500 characters.

string

Optionally caller-specified in jobs.create or jobs.patch.

A human-readable description for the job. This string must not contain more than 500 characters.

string

Required, except when used with jobs.patch.

Describes the schedule on which the job will be executed.

The schedule can be either of the following types:

• Crontab
• English-like schedule

As a general rule, execution n + 1 of a job will not begin until execution n has finished. Cloud Scheduler will never allow two simultaneously outstanding executions. For example, this implies that if the n+1th execution is scheduled to run at 16:00 but the nth execution takes until 16:15, the n+1th execution will not start until 16:15. A scheduled start time will be delayed if the previous execution has not ended when its scheduled time occurs.

If retryCount > 0 and a job attempt fails, the job will be tried a total of retryCount times, with exponential backoff, until the next scheduled start time. If retryCount is 0, a job attempt will not be retried if it fails. Instead the Cloud Scheduler system will wait for the next scheduled execution time. Setting retryCount to 0 does not prevent failed jobs from running according to schedule after the failure.

string

Specifies the time zone to be used in interpreting schedule. The value of this field must be a time zone name from the tz database.

Note that some time zones include a provision for daylight savings time. The rules for daylight saving time are determined by the chosen tz. For UTC use the string "utc". If a time zone is not specified, the default will be in UTC (also known as GMT).

string (Timestamp format)

Output only. The creation time of the job.

A timestamp in RFC3339 UTC "Zulu" format, with nanosecond resolution and up to nine fractional digits. Examples: "2014-10-02T15:01:23Z" and "2014-10-02T15:01:23.045123456Z".

enum (State)

Output only. State of the job.

object (Status)

Output only. The response from the target for the last attempted execution.

string (Timestamp format)

Output only. The next time the job is scheduled. Note that this may be a retry of a previously failed attempt or the next execution time according to the schedule.

A timestamp in RFC3339 UTC "Zulu" format, with nanosecond resolution and up to nine fractional digits. Examples: "2014-10-02T15:01:23Z" and "2014-10-02T15:01:23.045123456Z".

string (Timestamp format)

Output only. The time the last job attempt started.

A timestamp in RFC3339 UTC "Zulu" format, with nanosecond resolution and up to nine fractional digits. Examples: "2014-10-02T15:01:23Z" and "2014-10-02T15:01:23.045123456Z".

object (RetryConfig)

Settings that determine the retry behavior.

string (Duration format)

The deadline for job attempts. If the request handler does not respond by this deadline then the request is cancelled and the attempt is marked as a DEADLINE_EXCEEDED failure. The failed attempt can be viewed in execution logs. Cloud Scheduler will retry the job according to the RetryConfig.

The default and the allowed values depend on the type of target:

• For HTTP targets, the default is 3 minutes. The deadline must be in the interval [15 seconds, 30 minutes].

• For App Engine HTTP targets, 0 indicates that the request has the default deadline. The default deadline depends on the scaling type of the service: 10 minutes for standard apps with automatic scaling, 24 hours for standard apps with manual and basic scaling, and 60 minutes for flex apps. If the request deadline is set, it must be in the interval [15 seconds, 24 hours 15 seconds].

• For Pub/Sub targets, this field is ignored.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

object (PubsubTarget)

Pub/Sub target.

object (AppEngineHttpTarget)

App Engine HTTP target.

object (HttpTarget)

HTTP target.

string

Required. The name of the Cloud Pub/Sub topic to which messages will be published when a job is delivered. The topic name must be in the same format as required by Pub/Sub's PublishRequest.name, for example projects/PROJECT_ID/topics/TOPIC_ID.

The topic must be in the same project as the Cloud Scheduler job.

string (bytes format)

The message payload for PubsubMessage.

Pubsub message must contain either non-empty data, or at least one attribute.

A base64-encoded string.

map (key: string, value: string)

Attributes for PubsubMessage.

Pubsub message must contain either non-empty data, or at least one attribute.

An object containing a list of "key": value pairs. Example: { "name": "wrench", "mass": "1.3kg", "count": "3" }.

enum (HttpMethod)

The HTTP method to use for the request. PATCH and OPTIONS are not permitted.

object (AppEngineRouting)

App Engine Routing setting for the job.

string

The relative URI.

The relative URL must begin with "/" and must be a valid HTTP relative URL. It can contain a path, query string arguments, and # fragments. If the relative URL is empty, then the root path "/" will be used. No spaces are allowed, and the maximum length allowed is 2083 characters.

map (key: string, value: string)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the job is created.

Cloud Scheduler sets some headers to default values:

• User-Agent: By default, this header is "AppEngine-Google; (+http://code.google.com/appengine)". This header can be modified, but Cloud Scheduler will append "AppEngine-Google; (+http://code.google.com/appengine)" to the modified User-Agent.
• X-CloudScheduler: This header will be set to true.
• X-CloudScheduler-JobName: This header will contain the job name.
• X-CloudScheduler-ScheduleTime: For Cloud Scheduler jobs specified in the unix-cron format, this header will contain the job schedule as an offset of UTC parsed according to RFC3339.

If the job has a body and the following headers are not set by the user, Cloud Scheduler sets default values:

• Content-Type: This will be set to "application/octet-stream". You can override this default by explicitly setting Content-Type to a particular media type when creating the job. For example, you can set Content-Type to "application/json".

The headers below are output only. They cannot be set or overridden:

• Content-Length: This is computed by Cloud Scheduler.
• X-Google-*: For Google internal use only.
• X-AppEngine-*: For Google internal use only.

In addition, some App Engine headers, which contain job-specific information, are also be sent to the job handler.

An object containing a list of "key": value pairs. Example: { "name": "wrench", "mass": "1.3kg", "count": "3" }.

string (bytes format)

Body.

HTTP request body. A request body is allowed only if the HTTP method is POST or PUT. It will result in invalid argument error to set a body on a job with an incompatible HttpMethod.

A base64-encoded string.

string

App service.

By default, the job is sent to the service which is the default service when the job is attempted.

string

App version.

By default, the job is sent to the version which is the default version when the job is attempted.

string

App instance.

By default, the job is sent to an instance which is available when the job is attempted.

Requests can only be sent to a specific instance if manual scaling is used in App Engine Standard. App Engine Flex does not support instances. For more information, see App Engine Standard request routing and App Engine Flex request routing.

string

Output only. The host that the job is sent to.

For more information about how App Engine requests are routed, see here.

The host is constructed as:

• host = [application_domain_name] | [service] + '.' + [application_domain_name] | [version] + '.' + [application_domain_name] | [version_dot_service]+ '.' + [application_domain_name] | [instance] + '.' + [application_domain_name] | [instance_dot_service] + '.' + [application_domain_name] | [instance_dot_version] + '.' + [application_domain_name] | [instance_dot_version_dot_service] + '.' + [application_domain_name]

• application_domain_name = The domain name of the app, for example .appspot.com, which is associated with the job's project ID.

• service = service

• version = version

• version_dot_service = version + '.' + service

• instance = instance

• instance_dot_service = instance + '.' + service

• instance_dot_version = instance + '.' + version

• instance_dot_version_dot_service = instance + '.' + version + '.' + service

If service is empty, then the job will be sent to the service which is the default service when the job is attempted.

If version is empty, then the job will be sent to the version which is the default version when the job is attempted.

If instance is empty, then the job will be sent to an instance which is available when the job is attempted.

If service, version, or instance is invalid, then the job will be sent to the default version of the default service when the job is attempted.

string

Required. The full URI path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples of valid values for uri are: http://acme.com and https://acme.com/sales:8080. Cloud Scheduler will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding.

enum (HttpMethod)

Which HTTP method to use for the request.

map (key: string, value: string)

HTTP request headers.

This map contains the header field names and values.

The user can specify HTTP request headers to send with the job's HTTP request. Repeated headers are not supported, but a header value can contain commas.

The following headers represent a subset of the headers that accompany the job's HTTP request. Some HTTP request headers are ignored or replaced. A partial list of headers that are ignored or replaced is below:

• Host: This will be computed by Cloud Scheduler and derived from uri.
• Content-Length: This will be computed by Cloud Scheduler.
• User-Agent: This will be set to "Google-Cloud-Scheduler".
• X-Google-*: Google internal use only.
• X-AppEngine-*: Google internal use only.
• X-CloudScheduler: This header will be set to true.
• X-CloudScheduler-JobName: This header will contain the job name.
• X-CloudScheduler-ScheduleTime: For Cloud Scheduler jobs specified in the unix-cron format, this header will contain the job schedule as an offset of UTC parsed according to RFC3339.

If the job has a body and the following headers are not set by the user, Cloud Scheduler sets default values:

• Content-Type: This will be set to "application/octet-stream". You can override this default by explicitly setting Content-Type to a particular media type when creating the job. For example, you can set Content-Type to "application/json".

The total size of headers must be less than 80KB.

An object containing a list of "key": value pairs. Example: { "name": "wrench", "mass": "1.3kg", "count": "3" }.

string (bytes format)

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a job with an incompatible HttpMethod.

A base64-encoded string.

object (OAuthToken)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

object (OidcToken)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

string

Service account email to be used for generating OAuth token. The service account must be within the same project as the job. The caller must have iam.serviceAccounts.actAs permission for the service account.

string

OAuth scope to be used for generating OAuth access token. If not specified, "https://www.googleapis.com/auth/cloud-platform" will be used.

string

Service account email to be used for generating OIDC token. The service account must be within the same project as the job. The caller must have iam.serviceAccounts.actAs permission for the service account.

string

Audience to be used when generating OIDC token. If not specified, the URI specified in target will be used.

integer

The number of attempts that the system will make to run a job using the exponential backoff procedure described by maxDoublings.

The default value of retryCount is zero.

If retryCount is 0, a job attempt will not be retried if it fails. Instead the Cloud Scheduler system will wait for the next scheduled execution time. Setting retryCount to 0 does not prevent failed jobs from running according to schedule after the failure.

If retryCount is set to a non-zero number then Cloud Scheduler will retry failed attempts, using exponential backoff, retryCount times, or until the next scheduled execution time, whichever comes first.

Values greater than 5 and negative values are not allowed.

string (Duration format)

The time limit for retrying a failed job, measured from time when an execution was first attempted. If specified with retryCount, the job will be retried until both limits are reached.

The default value for maxRetryDuration is zero, which means retry duration is unlimited.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

string (Duration format)

The minimum amount of time to wait before retrying a job after it fails.

The default value of this field is 5 seconds.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

string (Duration format)

The maximum amount of time to wait before retrying a job after it fails.

The default value of this field is 1 hour.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

integer

The time between retries will double maxDoublings times.

A job's retry interval starts at minBackoffDuration, then doubles maxDoublings times, then increases linearly, and finally retries at intervals of maxBackoffDuration up to retryCount times.

For example, if minBackoffDuration is 10s, maxBackoffDuration is 300s, and maxDoublings is 3, then the job will first be retried in 10s. The retry interval will double three times, and then increase linearly by 2^3 * 10s. Finally, the job will retry at intervals of maxBackoffDuration until the job has been attempted retryCount times. Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s, 300s, ....

The default value of this field is 5.