Receive Pub/Sub events at an internal HTTP endpoint in a VPC network

Create a custom mode VPC network

A VPC network is a virtual version of a physical network that is implemented inside of Google's production network. It provides connectivity for your Compute Engine VM instances.

When a custom mode VPC network is created, no subnets are automatically created. This type of network provides you with complete control over its subnets and IP ranges.

gcloud compute networks create NETWORK_NAME \
    --subnet-mode=custom \
    --bgp-routing-mode=regional \
    --mtu=1460

Replace NETWORK_NAME with a name for the VPC network.

Note the following:

• Each new network that you create must have a unique name within the same project.
• The Border Gateway Protocol (BGP) routing mode controls the behavior of Cloud Routers in the network and can be either global or regional. The default is regional.
• The maximum transmission unit (MTU) is the largest packet size of the network. MTU can be set to any value from 1300 to 8896. The default is 1460. Before setting the MTU to a value higher than 1460, review Maximum transmission unit.

For more information, see Create and manage VPC networks.

Create an IPv4-only subnet

A network must have at least one subnet before you can use it.

When you create a subnet, you set a name, a region, and at least a primary IPv4 address range according to the subnet rules. Note that you can't create instances in a region that has no subnet defined.

gcloud compute networks subnets create SUBNET_NAME \
    --region=$REGION \
    --network=NETWORK_NAME \
    --range=10.10.10.0/24

Replace SUBNET_NAME with a name for the new subnet.

For more information, see Subnets.

Create VPC firewall rules

VPC firewall rules let you allow or deny traffic between resources in a VPC network based on port number, tag, or protocol.

VPC firewall rules are defined at the network level, and only apply to the network where they are created; however, the name you choose for a rule must be unique to the project.

1. Create a firewall rule for your VPC network that allows ingress traffic from any IPv4 address (0.0.0.0/0) to any instance on the network using port 22. This rule is not required for event delivery. However, for the purposes of this tutorial, create the rule so that you can connect to the VM using SSH and confirm the delivery of the event:

   gcloud compute firewall-rules create RULE_NAME_ONE \
       --network=projects/PROJECT_ID/global/networks/NETWORK_NAME \
       --direction=INGRESS \
       --priority=65534 \
       --action=ALLOW \
       --source-ranges=0.0.0.0/0 \
       --rules=tcp:22

2. Create a firewall rule for your VPC network that allows ingress traffic from a specific IP address range to any instance on the network using port 80 (as you will be deploying a web server on your VM that listens on port 80):

   gcloud compute firewall-rules create RULE_NAME_TWO \
       --network=projects/PROJECT_ID/global/networks/NETWORK_NAME \
       --direction=INGRESS \
       --priority=1000 \
       --action=ALLOW \
       --source-ranges=10.10.10.0/24 \
       --rules=tcp:80

   Replace RULE_NAME_ONE and RULE_NAME_TWO with unique names for your firewall rules.

   Note that using --source-ranges is optional and indicates a list of IP address blocks that are allowed to make inbound connections that match the firewall rule to the instances on the network. In this case, the range matches the range used in the subnet you previously created.

   We recommend that you use the flag to apply your firewall rule specifically to Eventarc traffic. If neither --source-ranges nor --source-tags are specified, --source-ranges defaults to 0.0.0.0/0, which means that the rule applies to all incoming IPv4 connections from inside or outside the network.

For more information, see Use VPC firewall rules.

Create a network attachment

A network attachment is a resource that lets a producer VPC network initiate connections to a consumer VPC network through a Private Service Connect interface.

To publish events, Eventarc uses the network attachment to establish a connection to the internal HTTP endpoint hosted in a VPC network.

You can create a network attachment that automatically accepts connections from any Private Service Connect interface that refers to the network attachment. Create the network attachment in the same network and region containing the HTTP destination service.

gcloud compute network-attachments create ATTACHMENT_NAME \
    --region=$REGION \
    --subnets=SUBNET_NAME \
    --connection-preference=ACCEPT_AUTOMATIC

Replace ATTACHMENT_NAME with a name for the network attachment.

For more information, see About network attachments.

Create a VM instance in a specified subnet

A Compute Engine VM instance is a virtual machine that is hosted on Google's infrastructure. The terms Compute Engine instance, VM instance, and VM are synonymous and are used interchangeably. VM instances include Google Kubernetes Engine (GKE) clusters, App Engine flexible environment instances, and other Google Cloud products built on Compute Engine VMs.

Create a Compute Engine VM instance in the VPC network to which you can deploy an event receiver service.

gcloud compute instances create INSTANCE_NAME \
      --zone=$ZONE \
      --machine-type=e2-medium \
      --subnet=SUBNET_NAME

Replace INSTANCE_NAME with a name for the VM.

For more information, see Create and start a VM instance.

Deploy an event receiver on the VM

Deploy a web server on your VM that listens on port 80, and receives and logs events.

1. Establish an SSH connection to your VM instance by using the SSH button in the Google Cloud console to connect to your VM.

   After a connection to the SSH server is established, use the SSH-in-browser terminal to run commands on your VM instance.

2. In the SSH-in-browser terminal, create a text file with the filename server.py that contains the following Python code:

   #!/usr/bin/env python3
   from http.server import BaseHTTPRequestHandler, HTTPServer
   import logging
   
   class S(BaseHTTPRequestHandler):
       def _set_response(self):
           self.send_response(200)
           self.send_header('Content-type', 'text/html')
           self.end_headers()
   
       def do_GET(self):
           logging.info("GET request,\nPath: %s\nHeaders:\n%s\n", str(self.path), str(self.headers))
           self._set_response()
           self.wfile.write("GET request for {}".format(self.path).encode('utf-8'))
   
       def do_POST(self):
           content_length = int(self.headers['Content-Length'])
           post_data = self.rfile.read(content_length)
           logging.info("POST request,\nPath: %s\nHeaders:\n%s\n\nBody:\n%s\n",
                   str(self.path), str(self.headers), post_data.decode('utf-8'))
   
           self._set_response()
           self.wfile.write("POST request for {}".format(self.path).encode('utf-8'))
   
   def run(server_class=HTTPServer, handler_class=S, port=80):
       logging.basicConfig(level=logging.INFO)
       server_address = ('', port)
       http_server = server_class(server_address, handler_class)
       logging.info('Starting HTTP Server at port %d...\n', port)
       try:
           http_server.serve_forever()
       except KeyboardInterrupt:
           pass
       http_server.server_close()
       logging.info('Stopping HTTP Server...\n')
   
   if __name__ == '__main__':
       from sys import argv
   
       if len(argv) == 2:
           run(port=int(argv[1]))
       else:
           run()

3. Start the server and keep the server running for the remaining steps in this tutorial:

   sudo python3 server.py
   

Create an Eventarc trigger

Create an Eventarc trigger that creates a new Pub/Sub topic and routes events to the event receiver deployed on the VM when a message is published to the Pub/Sub topic.

After you enabled the Compute Engine API, the default service account is the Compute Engine default service account (PROJECT_NUMBER[email protected]). For testing purposes, the trigger uses this default service account for its identity.

gcloud eventarc triggers create TRIGGER_NAME \
    --location=$REGION \
    --destination-http-endpoint-uri=http://INSTANCE_NAME.$ZONE.c.PROJECT_ID.internal \
    --network-attachment="projects/PROJECT_ID/regions/$REGION/networkAttachments/ATTACHMENT_NAME" \
    --event-filters="type=google.cloud.pubsub.topic.v1.messagePublished" \
    --service-account=PROJECT_NUMBER[email protected]

Replace PROJECT_NUMBER with your Google Cloud project number. You can find your project number on the Welcome page of the Google Cloud console or by running the following command:

gcloud projects describe PROJECT_ID --format='value(projectNumber)'

For more information about configuring your trigger, see Route events to an internal HTTP endpoint in a VPC network.

Generate and view a Pub/Sub topic event

You can generate an event by publishing a message to a Pub/Sub topic.

1. Find and set the Pub/Sub topic as an environment variable:

   export MY_TOPIC=$(gcloud eventarc triggers describe TRIGGER_NAME \
       --location=$REGION \
       --format='value(transport.pubsub.topic)')

2. Publish a message to the Pub/Sub topic to generate an event:

   gcloud pubsub topics publish $MY_TOPIC --message "Hello World"

   The Eventarc trigger routes the event to the internal HTTP endpoint in your VPC network. In the SSH-in-browser terminal, the body of the event is output. It should be similar to the following:

   Body:
   {
       "message": {
           "data": "SGVsbG8gV29ybGQ=",
           "messageId": "8795720366614192",
           "publishTime": "2023-08-26T13:09:48Z"
       }
   }
   
   10.10.10.3 - - [26/Aug/2023 13:09:49] "POST / HTTP/1.1" 200 -
   

   Note that if you decode the data value of SGVsbG8gV29ybGQ= from its Base64 format, "Hello World" is returned.

You have successfully deployed an event receiver service to an internal HTTP endpoint in a VPC network, created an Eventarc trigger, generated an event from Pub/Sub, and confirmed that the event was routed as expected by the trigger to the target endpoint.