Method: organizationSecurityPolicies.addRule

{
  "kind": string,
  "description": string,
  "priority": integer,
  "match": {
    "expr": {
      "expression": string,
      "title": string,
      "description": string,
      "location": string
    },
    "exprOptions": {
      "recaptchaOptions": {
        "actionTokenSiteKeys": [
          string
        ],
        "sessionTokenSiteKeys": [
          string
        ]
      }
    },
    "versionedExpr": enum,
    "config": {
      "srcIpRanges": [
        string
      ],
      "destIpRanges": [
        string
      ],
      "layer4Configs": [
        {
          "ipProtocol": string,
          "ports": [
            string
          ]
        }
      ]
    }
  },
  "networkMatch": {
    "userDefinedFields": [
      {
        "name": string,
        "values": [
          string
        ]
      }
    ],
    "srcIpRanges": [
      string
    ],
    "destIpRanges": [
      string
    ],
    "ipProtocols": [
      string
    ],
    "srcPorts": [
      string
    ],
    "destPorts": [
      string
    ],
    "srcRegionCodes": [
      string
    ],
    "srcAsns": [
      integer
    ]
  },
  "action": string,
  "preview": boolean,
  "direction": enum,
  "targetResources": [
    string
  ],
  "enableLogging": boolean,
  "ruleTupleCount": integer,
  "rateLimitOptions": {
    "rateLimitThreshold": {
      "count": integer,
      "intervalSec": integer
    },
    "conformAction": string,
    "exceedAction": string,
    "exceedRedirectOptions": {
      "type": enum,
      "target": string
    },
    "enforceOnKey": enum,
    "enforceOnKeyName": string,
    "enforceOnKeyConfigs": [
      {
        "enforceOnKeyType": enum,
        "enforceOnKeyName": string
      }
    ],
    "banThreshold": {
      "count": integer,
      "intervalSec": integer
    },
    "banDurationSec": integer
  },
  "targetServiceAccounts": [
    string
  ],
  "ruleNumber": string,
  "headerAction": {
    "requestHeadersToAdds": [
      {
        "headerName": string,
        "headerValue": string
      }
    ]
  },
  "redirectOptions": {
    "type": enum,
    "target": string
  },
  "preconfiguredWafConfig": {
    "exclusions": [
      {
        "targetRuleSet": string,
        "targetRuleIds": [
          string
        ],
        "requestHeadersToExclude": [
          {
            "val": string,
            "op": enum
          }
        ],
        "requestCookiesToExclude": [
          {
            "val": string,
            "op": enum
          }
        ],
        "requestQueryParamsToExclude": [
          {
            "val": string,
            "op": enum
          }
        ],
        "requestUrisToExclude": [
          {
            "val": string,
            "op": enum
          }
        ]
      }
    ]
  }
}

string

[Output only] Type of the resource. Always compute#securityPolicyRule for security policy rules

string

An optional description of this resource. Provide this property when you create the resource.

integer

An integer indicating the priority of a rule in the list. The priority must be a positive value between 0 and 2147483647. Rules are evaluated from highest to lowest priority where 0 is the highest priority and 2147483647 is the lowest priority.

object

A match condition that incoming traffic is evaluated against. If it evaluates to true, the corresponding 'action' is enforced.

object

User defined CEVAL expression. A CEVAL expression is used to specify match criteria such as origin.ip, source.region_code and contents in the request header. Expressions containing evaluateThreatIntelligence require Cloud Armor Managed Protection Plus tier and are not supported in Edge Policies nor in Regional Policies. Expressions containing evaluatePreconfiguredExpr('sourceiplist-*') require Cloud Armor Managed Protection Plus tier and are only supported in Global Security Policies.

string

Textual representation of an expression in Common Expression Language syntax.

string

Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.

string

Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.

string

Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.

object

The configuration options available when specifying a user defined CEVAL expression (i.e., 'expr').

object

reCAPTCHA configuration options to be applied for the rule. If the rule does not evaluate reCAPTCHA tokens, this field has no effect.

string

A list of site keys to be used during the validation of reCAPTCHA action-tokens. The provided site keys need to be created from reCAPTCHA API under the same project where the security policy is created.

string

A list of site keys to be used during the validation of reCAPTCHA session-tokens. The provided site keys need to be created from reCAPTCHA API under the same project where the security policy is created.

enum

Preconfigured versioned expression. If this field is specified, config must also be specified. Available preconfigured expressions along with their requirements are: SRC_IPS_V1 - must specify the corresponding srcIpRange field in config.

object

The configuration options available when specifying versionedExpr. This field must be specified if versionedExpr is specified and cannot be specified if versionedExpr is not specified.

string

CIDR IP address range. Maximum number of srcIpRanges allowed is 10.

string

CIDR IP address range.

This field may only be specified when versionedExpr is set to FIREWALL.

object

Pairs of IP protocols and ports that the rule should match.

This field may only be specified when versionedExpr is set to FIREWALL.

string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp), or the IP protocol number.

string

An optional list of ports to which this rule applies. This field is only applicable for UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port.

Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

This field may only be specified when versionedExpr is set to FIREWALL.

object

A match condition that incoming packets are evaluated against for CLOUD_ARMOR_NETWORK security policies. If it matches, the corresponding 'action' is enforced.

The match criteria for a rule consists of built-in match fields (like 'srcIpRanges') and potentially multiple user-defined match fields ('userDefinedFields').

Field values may be extracted directly from the packet or derived from it (e.g. 'srcRegionCodes'). Some fields may not be present in every packet (e.g. 'srcPorts'). A user-defined field is only present if the base header is found in the packet and the entire field is in bounds.

Each match field may specify which values can match it, listing one or more ranges, prefixes, or exact values that are considered a match for the field. A field value must be present in order to match a specified match field. If no match values are specified for a match field, then any field value is considered to match it, and it's not required to be present. For strings specifying '*' is also equivalent to match all.

For a packet to match a rule, all specified match fields must match the corresponding field values derived from the packet.

Example:

networkMatch: srcIpRanges: - "192.0.2.0/24" - "198.51.100.0/24" userDefinedFields: - name: "ipv4_fragment_offset" values: - "1-0x1fff"

The above match condition matches packets with a source IP in 192.0.2.0/24 or 198.51.100.0/24 and a user-defined field named "ipv4_fragment_offset" with a value between 1 and 0x1fff inclusive.

object

User-defined fields. Each element names a defined field and lists the matching values for that field.

string

Name of the user-defined field, as given in the definition.

string

Matching values of the field. Each element can be a 32-bit unsigned decimal or hexadecimal (starting with "0x") number (e.g. "64") or range (e.g. "0x400-0x7ff").

string

Source IPv4/IPv6 addresses or CIDR prefixes, in standard text format.

string

Destination IPv4/IPv6 addresses or CIDR prefixes, in standard text format.

string

IPv4 protocol / IPv6 next header (after extension headers). Each element can be an 8-bit unsigned decimal number (e.g. "6"), range (e.g. "253-254"), or one of the following protocol names: "tcp", "udp", "icmp", "esp", "ah", "ipip", or "sctp".

string

Source port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").

string

Destination port numbers for TCP/UDP/SCTP. Each element can be a 16-bit unsigned decimal number (e.g. "80") or range (e.g. "0-1023").

string

Two-letter ISO 3166-1 alpha-2 country code associated with the source IP address.

integer (uint32 format)

BGP Autonomous System Number associated with the source IP address.

string

The Action to perform when the rule is matched. The following are the valid actions:

• allow: allow access to target.
• deny(STATUS): deny access to target, returns the HTTP response code specified. Valid values for STATUS are 403, 404, and 502.
• rate_based_ban: limit client traffic to the configured threshold and ban the client if the traffic exceeds the threshold. Configure parameters for this action in RateLimitOptions. Requires rateLimitOptions to be set.
• redirect: redirect to a different target. This can either be an internal reCAPTCHA redirect, or an external URL-based redirect via a 302 response. Parameters for this action can be configured via redirectOptions. This action is only supported in Global Security Policies of type CLOUD_ARMOR.
• throttle: limit client traffic to the configured threshold. Configure parameters for this action in rateLimitOptions. Requires rateLimitOptions to be set for this.

boolean

If set to true, the specified action is not enforced.

enum

The direction in which this rule applies. This field may only be specified when versionedExpr is set to FIREWALL.

string

A list of network resource URLs to which this rule applies. This field allows you to control which network's VMs get this rule. If this field is left blank, all VMs within the organization will receive the rule.

This field may only be specified when versionedExpr is set to FIREWALL.

boolean

Denotes whether to enable logging for a particular rule. If logging is enabled, logs will be exported to the configured export destination in Stackdriver. Logs may be exported to BigQuery or Pub/Sub. Note: you cannot enable logging on "goto_next" rules.

This field may only be specified when the versionedExpr is set to FIREWALL.

integer

[Output Only] Calculation of the complexity of a single firewall security policy rule.

object

Must be specified if the action is "rate_based_ban" or "throttle". Cannot be specified for any other actions.

object

Threshold at which to begin ratelimiting.

integer

Number of HTTP(S) requests for calculating the threshold.

integer

Interval over which the threshold is computed.

string

Action to take for requests that are under the configured rate limit threshold. Valid option is "allow" only.

string

Action to take for requests that are above the configured rate limit threshold, to either deny with a specified HTTP response code, or redirect to a different endpoint. Valid options are deny(STATUS), where valid values for STATUS are 403, 404, 429, and 502, and redirect, where the redirect parameters come from exceedRedirectOptions below. The redirect action is only supported in Global Security Policies of type CLOUD_ARMOR.

object

Parameters defining the redirect action that is used as the exceed action. Cannot be specified if the exceed action is not redirect. This field is only supported in Global Security Policies of type CLOUD_ARMOR.

enum

Type of the redirect action.

string

Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.

enum

Determines the key to enforce the rateLimitThreshold on. Possible values are:

• ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKey" is not configured.
• IP: The source IP address of the request is the key. Each IP has this limit enforced separately.
• HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL.
• XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP.
• HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
• HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes.
• SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session.
• REGION_CODE: The country/region from which the request originates.
• TLS_JA3_FINGERPRINT: JA3 TLS/SSL fingerprint if the client connects using HTTPS, HTTP/2 or HTTP/3. If not available, the key type defaults to ALL.
• USER_IP: The IP address of the originating client, which is resolved based on "userIpRequestHeaders" configured with the security policy. If there is no "userIpRequestHeaders" configuration or an IP address cannot be resolved from it, the key type defaults to IP.

string

Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.

object

If specified, any combination of values of enforceOnKeyType/enforceOnKeyName is treated as the key on which ratelimit threshold/action is enforced. You can specify up to 3 enforceOnKeyConfigs. If enforceOnKeyConfigs is specified, enforceOnKey must not be specified.

enum

Determines the key to enforce the rateLimitThreshold on. Possible values are:

• ALL: A single rate limit threshold is applied to all the requests matching this rule. This is the default value if "enforceOnKeyConfigs" is not configured.
• IP: The source IP address of the request is the key. Each IP has this limit enforced separately.
• HTTP_HEADER: The value of the HTTP header whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the header value. If no such header is present in the request, the key type defaults to ALL.
• XFF_IP: The first IP address (i.e. the originating client IP address) specified in the list of IPs under X-Forwarded-For HTTP header. If no such header is present or the value is not a valid IP, the key defaults to the source IP address of the request i.e. key type IP.
• HTTP_COOKIE: The value of the HTTP cookie whose name is configured under "enforceOnKeyName". The key value is truncated to the first 128 bytes of the cookie value. If no such cookie is present in the request, the key type defaults to ALL.
• HTTP_PATH: The URL path of the HTTP request. The key value is truncated to the first 128 bytes.
• SNI: Server name indication in the TLS session of the HTTPS request. The key value is truncated to the first 128 bytes. The key type defaults to ALL on a HTTP session.
• REGION_CODE: The country/region from which the request originates.
• TLS_JA3_FINGERPRINT: JA3 TLS/SSL fingerprint if the client connects using HTTPS, HTTP/2 or HTTP/3. If not available, the key type defaults to ALL.
• USER_IP: The IP address of the originating client, which is resolved based on "userIpRequestHeaders" configured with the security policy. If there is no "userIpRequestHeaders" configuration or an IP address cannot be resolved from it, the key type defaults to IP.

string

Rate limit key name applicable only for the following key types: HTTP_HEADER -- Name of the HTTP header whose value is taken as the key value. HTTP_COOKIE -- Name of the HTTP cookie whose value is taken as the key value.

object

Can only be specified if the action for the rule is "rate_based_ban". If specified, the key will be banned for the configured 'banDurationSec' when the number of requests that exceed the 'rateLimitThreshold' also exceed this 'banThreshold'.

integer

Number of HTTP(S) requests for calculating the threshold.

integer

Interval over which the threshold is computed.

integer

Can only be specified if the action for the rule is "rate_based_ban". If specified, determines the time (in seconds) the traffic will continue to be banned by the rate limit after the rate falls below the threshold.

string

A list of service accounts indicating the sets of instances that are applied with this rule.

string (int64 format)

Identifier for the rule. This is only unique within the given security policy. This can only be set during rule creation, if rule number is not specified it will be generated by the server.

object

Optional, additional actions that are performed on headers. This field is only supported in Global Security Policies of type CLOUD_ARMOR.

object

The list of request headers to add or overwrite if they're already present.

string

The name of the header to set.

string

The value to set the named header to.

object

Parameters defining the redirect action. Cannot be specified for any other actions. This field is only supported in Global Security Policies of type CLOUD_ARMOR.

enum

Type of the redirect action.

string

Target for the redirect action. This is required if the type is EXTERNAL_302 and cannot be specified for GOOGLE_RECAPTCHA.

object

Preconfigured WAF configuration to be applied for the rule. If the rule does not evaluate preconfigured WAF rules, i.e., if evaluatePreconfiguredWaf() is not used, this field will have no effect.

object

A list of exclusions to apply during preconfigured WAF evaluation.

string

Target WAF rule set to apply the preconfigured WAF exclusion.

string

A list of target rule IDs under the WAF rule set to apply the preconfigured WAF exclusion. If omitted, it refers to all the rule IDs under the WAF rule set.

object

A list of request header names whose value will be excluded from inspection during preconfigured WAF evaluation.

string

The value of the field.

enum

The match operator for the field.

object

A list of request cookie names whose value will be excluded from inspection during preconfigured WAF evaluation.

string

The value of the field.

enum

The match operator for the field.

object

A list of request query parameter names whose value will be excluded from inspection during preconfigured WAF evaluation. Note that the parameter can be in the query string or in the POST body.

string

The value of the field.

enum

The match operator for the field.

object

A list of request URIs from the request line to be excluded from inspection during preconfigured WAF evaluation. When specifying this field, the query or fragment part should be excluded.

string

The value of the field.

enum

The match operator for the field.