Untitled, Part 7

Untitled, Part 7

note: In case you are wondering, yes, I do have a couple of titles floating around for this project, I just haven't settled on the right one yet.

Meanwhile:

I was a bit concerned that all the tiny repetitive circular free motion quilting (from the last post) would cause injury to my rotator cuffs.  So instead of finishing the quilting on ALL these little pieces, I planned to start the next step at the same time. That way, I could alternate sewing jobs, utilizing different muscles, and hopefully not get a repetitive stress injury.  

The next step is satin stitching the blocks. And, I wanted to use as many different color combinations as possible. So, I got out my thread chart samples and I inventoried my supply. I opted to buy a lot of new thread to extend my stash of threads. It was so fun to have them come in!! This selection is mostly Magnifico from Superior Threads. 

Also, I knew the back sides of the blocks were going to show, so I wanted the thread color on the back to match the thread color on the front. This also meant I had to buy some more empty bobbins, and fill them as I went. I used some Bottom Line (also from Superior Threads) for the bobbins, mostly because I had such a big stash of Bottom Line and also, it works really great in the bobbins and has excellent color choices!

Here's the part where I tried to decide which thread colors to use for each quilted block, trying to maintain a variety of color combinations. I am also very aware that this many color choices will mean that I need to change the thread in my machine frequently. It can be frustrating to have such a demanding muse!

Let the stitching begin! Something about working with these shiny colorful threads paired with the matte finish of the batik blocks was visually satisfying to me. I enjoyed this phase immensely. It was a lot more fun that quilting in a matching thread color.

I also found it easier to turn the quilted pieces under the sewing machine if I trimmed the quilted pages to only 2 squares wide. This will also help out later, for the next round of stitching! Isn't it interesting how the different colors of satin stitching thread make the color of the batik look different? These are all pink batiked squares, but the pinks look different to me depending on the threads surrounding them.

Meanwhile, of note....the satin stitching, especially at the speed I was going, was loud. So, I wore hearing protectors while working.  And part way through the project, my sewing machine broke. I had that machine since about 2008, or maybe before then? It was a low end Pfaff, and I bought it just for satin stitching because of all the machines I tested, it performed the best.  Now, the presser foot was broken, and it just would not work. I opted to buy a new machine instead of waiting the 5-8 weeks turn-around time for a repair. I also did not know if they would be able to make a repair of this nature and had entered a bizarre world of sewing machine repairs previously with my Juki.  I didn't have the heart to go there again. However, I kept my trusty broken Pfaff, thinking I would get it repaired and have a back up, but I haven't done it yet....

The new Pfaff. They don't sell my favorite machine anymore. I was heartbroken. I don't like changes. So, I went on-line, directly to Pfaff, and bought the closest thing they had to my old machine. On the bright side, it came with a needle threader, which I absolutely adore, and it made the numerous thread changes bearable. The day after I bought the machine, it went on sale. Nuts! I called and asked if they would honor the sales price, and refund me the difference? They said YES! Very, very nice of them! Then they sent me a refund for the full price of the machine, and never billed me for the sale price. I tried calling, it took 4 attempts to get through their phone system, but I finally got to speak to a human. I told them what happened and that I still needed to pay for the machine. They thanked me for my honesty, and then, they still never billed me. ??? I really tried to make this right, but ultimately, it didn't happen. So, I got a new free machine, by accident. I would still pay for it, today, if they would give me a way to pay for it. 

Back to the project, I enjoyed working my way through the giant pile of quilting, because the satin stitching was my reward! I also require chocolate, from time to time, to help with the motivation for the huge work load. This was my favorite.

Untitled, Part 6

Untitled, Part 6

Let the sewing begin!

First up, layering all the fabric with a backing and batting. These pieces will be seen from the front and a little bit from the back (or so I thought), so I picked matching solid colored fabrics for the backing. I think I used up ALL my blues, and had to buy some more! 

This effectively tripled the bulk of the project. Fortunately, I opted not to baste the layers.  The pieces are small enough that the quilting will be manageable without it.  I do not use an adhesive to baste.  These fabrics are being held in place by the friction of the fabric with the batting, and it works well enough. Finally, a small time saver for this extensive project!

The quilting part is a bit dull, and repetitive, but the lighting from the outside makes the texture look amazing.  And, I had two goals with the quilting.  The first is to add some texture to enhance the batik motif.  I don't want to distract from it. So, I chose a matching thread color.   The second goal is to add strength and stability to the little pieces.  In general, the denser the quilting the stiffer the quilt. 

These quilting lines are spaced about 1/16th of an inch.  Very close.  Also, lots and lots
of bobbins...

This page, I couldn't help but channel IKEA while quilting.  Hmmm....

The back of one of the pieces.

Thanks for following along! Progress is being made!

Untitled, Part 5

Untitled, Part 5

the dyeing and wax removal

One of the most rewarding parts of batik is applying the dye, and it was finally time! 

First was deciding how many of each little square I would need in each color.  For the yellow, I only needed 6, but I made a few extra.  And, for my special 6, I wanted them to each have different colors for the motifs.  And, for the motif to show, I would not select any of the same color as the dye used at this point. So, I selected anything but yellow.  Since I needed so few pieces, I cut off the 6 individual squares from the pages, which left me with quite small pieces to work with. Here they are after boiling out the wax, rinsing, and hanging on the line outside.

The greens were slightly bigger.  I was able to cut off strips from the pages.  I would need a little over 100 for the project, so I was able to sample most of the colors.  

The aqua colors were even bigger pieces because I needed over 300 of those.  The cut out shapes are getting bigger and odder.  However, when I finally got to the quilting stage of this project, it would become so much easier with larger pieces and less edges.  The tiny yellows would be the hardest to quilt, and the biggest pieces became the easiest ones to quilt.  So, I was trying to optimize area, and minimize the size of the edges. 

Last will be the bright blue dyes. I needed over 700 of these little square motifs. And these were the biggest part of the pages that I prepared. They also took up the most room on my dyeing surface, a reclaimed sliding glass door. This took many days because there was a lot of work, and relatively little surface area to do the dyeing. I arranged the pieces flat on the glass surface and applied the dye with a big paint brush. The brushing of the dye also allowed me to brush out air bubbles that invariably arise. The wax on the fabric puffs up a bit thicker than the surrounding fabric. Those air bubbles can cause some interesting texture when dyeing, but that is not the look I was looking for here. 

The dyeing surface, with wax and dye still on the pages.

Note the difference between the above photo and the one below it.  The lower photo has the wax boiled out and the fabric has been rinsed and is drying on the line.  All the colors finally pop!

After all the dyes had been applied, each page is left to process overnight, and then rinsed with water multiple times.  Next is the wax removal. That part is done in a giant pot of boiling water on my stove in my kitchen.  This was a really big project and it took many days to boil out all the wax. Each piece is slowly lowered into the giant pot of boiling water and swished around with tongs.  Then it is slowly lifted out of the water in an attempt to avoid the wax floating on the surface.  I have a few tricks to help with that!  

I was able to boil out 4 or 5 pages of work before the water became too concentrated with excess dye.  Then each fabric page was taken outside and dried on the line and rinsed again with water from a hose.  This is the stage where you can feel and see any clumps of residue wax and it just rolls off the surface when brushed with your hand.  Next they were washed with soap and hot water in my washing machine, and then dried again.  I also let my big pots of boiling water cool before disposal, because then I can skim the wax off the surface of the water before tossing the water down the drain.  I didn't want the wax clogging up my drains! ps. It takes a long time for a giant pot of water to cool...

Finally my stack of fabrics to make the project!

Untitled, Part 4

Untitled, Part 4

Dyeing Experiments and the Project Interruption by the Decaying Deck...sigh....

Summer 2022

Except for the size of this project and the vast amounts of repetition, the dyeing is reasonably straightforward.  I only have 4 colors to overdye.  The exception is that I am not sure which blue dye I want to use. And, I have had some not so pleasant results in the past....and, so, I will experiment!

I cut off 2 samples of each edge of every 'page' that has been bleach discharged. Then I tried out 2 different blue dyes on all of them. It seemed simple enough, to compare the colors afterwards and pick one.  However, these tiny samples were somehow harder to dye, and rinse and process, because they were so tiny. 

Blue dye 1

Blue dye 2

Dyeing blue on top of barely faded oranges, does not look as blue as I wanted. And, the orange pages were the hardest to bleach discharge. I also did not keep track of which dyes I used to make these blends, but I suspect the bottom one had more Navy dye in it. I opted for the top, brighter blues.

Meanwhile, my deck was in a very sad and rotted state. I had been replacing rotted and decayed boards for years. It was originally a redwood deck.  And it had become increasingly difficult to find a source for redwood planks. I decided to make the overall deck smaller, so I started 'borrowing' planks from the decks I would eventually get rid of, to use on the deck sections I was keeping. This worked for a while, but it turns out that the supports for the decks were also rotting, and that was too big a job for me to handle by myself.  

I hired someone to replace the entire deck, but they do not finish the wood with staining.  I also noticed while I was ripping up planks that the edges of the boards rot first.  So, I wanted to stain all sides of the new planks before they were installed. The boards were delivered and then it was up to me to stain them. It was June, and so very hot.  I used the old deck as my work surface, but it was really cramped and crowded and still had missing planks for me to carefully maneuver around.  I wanted to paint each board on all the sides, and put 2 coats on.  It was a lot of work, and did I mention hot? Wah..........  Driven by economics, I kept trying to convince myself that it would be worth it because the new boards would last longer if protected with the stain.

When I was finished staining the boards, I stacked them with spacers (so that they wouldn't stick together) and waited for the demolition to begin. 

They worked quickly and efficiently, and within a week I had a new, and safe deck!

It is so nice to have the deck sections a little more streamlined and to have less deck to take care of in the future.  I also added a little landscaping where there are no longer deck sections.  Next up is planting, but it will have to wait because our summers are too hot for new plants.