Scanner WiFi avec écran OLED I2C (SSD1306) sur un ESP-01 (ESP8266)

diy development board for the ESP-01 MCU

Runs WS2812 light strip using ESP8266 (ESP-01) indicating some status info

A mesh network to analyse a Arduino Weather Station data

Camera shutter with an ESP8266 Wi-Fi module.

upgraded watering system

The board that simplify the flash write of the ESP-01

MQTT_Thermometer which runs on ESP-01

ESP8266 Thermo+Humi Sensor for RapidScada installation

Initialization for ESP8266, ESP32 - user can setup WiFi and MQTT connection

Door Bell Switch with ESP-01 and MQTT for OpenHab

A place to organize all my thoughts and experimation on the WowWee MiP robot.

A simple pcb on which you can connect 4 sensors to the 4 gpio pins, also it has a voltage stabilizer which can take up to 30V (so you can safely power it up from 5,12,24V source)

esp-01 extension board, with 4 mosfet transistors independently controlled, also has 1 power led and 4 status leds, and 3.3v stabilizations (can be powered up to 30V)

PCB design and firmware for Wi-Fi controlled LED dimmer

Programmer Board for ESP-01

This is a fork of ESP8266 nonOS SDK v2.1 that I used for my ESP-01 (with 4Mbits flash). Expressif seems no long keeping any version older than 2.1 in its github, this fork is kept in case Expressif purged the version in near future.

WLAN Router based on ESP8266 / ESP-01

开源的esp8266开关，基于esp8266的实现，w600实现：https://github.com/iotdevice/w600-switch

A simple breakout board for an ESP-01 that has a protoboard area. Provides 5v and 3v3 rails.