FYI, we have decided to switch our contributions to the new repository https://github.com/mage2click/docker-magento-mutagen

Originally, our custom branches in the forked repo were based on Mark’s repo, but we have done a lot of changes which makes it not backward compatible.

Mark Shust's Docker Configuration for Magento

• Free Course
• Docker Hub
• Usage
• Prerequisites
• Quick Setup
• Custom CLI Commands
• Misc Info
• Credits
• License

I created a free course which details the basic usage of this project:

Setup a Magento 2 Development Environment with Docker

View Dockerfiles:

• markoshust/magento-nginx (Docker Hub)
  • 1.13
    • latest, 1.13, 1.13-7
    • 1.13-6
    • 1.13-5
    • 1.13-4
    • 1.13-3
    • 1.13-2
    • 1.13-1
    • 1.13-0
• markoshust/magento-php (Docker Hub)
  • 7.2
    • latest, 7.2-fpm, 7.2-fpm-0
  • 7.1
    • 7.1-fpm, 7.1-fpm-9
    • 7.1-fpm-8
    • 7.1-fpm-7
    • 7.1-fpm-6
    • 7.1-fpm-5
    • 7.1-fpm-4
    • 7.1-fpm-3
    • 7.1-fpm-2
    • 7.1-fpm-1
    • 7.1-fpm-0

This configuration is intended to be used as a Docker-based development environment for Magento 2.

Folders:

• images: Docker images for nginx and php
• compose: sample setups with Docker Compose

The Magento 1 version of this development environment has been deprecated and is no longer supported. PHP 5 was used as it's base, and that version has reached end-of-life. If you still wish to use this setup, please reference compose/magento-1 on tag 20.1.1, but please be aware these images are no longer maintained.

This setup assumes you are running Docker on a computer with at least 4GB of allocated RAM, a dual-core, and an SSD hard drive. Download & Install Docker Community Edition.

This configuration has been tested on Mac & Linux.

Windows Configurations: The Windows configuration does not currently work and is in need of a contributor to get functional once again. Please see issue 100 to contribute.

macOS & Linux Only

Run this automated one-liner from the directory you want to install your project to:

curl -s https://raw.githubusercontent.com/markshust/docker-magento/master/lib/onelinesetup | bash -s -- magento2.test 2.3.1

curl -s https://raw.githubusercontent.com/mage2click/docker-magento/develop/lib/onelinesetup | bash -s -- mage2click.test 2.3.1

or use the following command to install from the zip file downloaded from magento.com :

curl -s https://raw.githubusercontent.com/mage2click/docker-magento/develop/lib/onelinesetup | bash -s -- mage2click.test /path/to/magento.zip lite

The magento2.test above defines the hostname to use, and the /path/to/magento.zip defines the local path to Magento zip archive. The lite param at the end means that we do not need to execute composer install during the setup because zip version of magento already have all needed files in the vendor folder

Note that since we need a write to /etc/hosts for DNS resolution, you will be prompted for your system password during setup.

After the one-liner above completes running, you should be able to access your site at https://magento2.test.

Same result as the one-liner above. Just replace magento2.test references with the hostname that you wish to use.

# Download the Docker Compose template:
curl -s https://raw.githubusercontent.com/markshust/docker-magento/master/lib/template | bash -s -- magento-2

## for the latest (UNSTABLE) features use mage2click develop branch 
curl -s https://raw.githubusercontent.com/mage2click/docker-magento/develop/lib/template | bash -s -- magento-2

# Download the version of Magento you want to use with:
bin/download 2.3.1

# or if you'd rather install with Composer, run:
#
# OPEN SOURCE:
#
# rm -rf src
# composer create-project --repository=https://repo.magento.com/ --ignore-platform-reqs magento/project-community-edition=2.3.1 src
#
# COMMERCE:
#
# rm -rf src
# composer create-project --repository=https://repo.magento.com/ --ignore-platform-reqs magento/project-enterprise-edition=2.3.1 src

# Create a DNS host entry for the site:
echo "127.0.0.1 magento2.test" | sudo tee -a /etc/hosts

# Run the setup installer for Magento:
bin/setup magento2.test

open https://magento2.test

# Download the Docker Compose template:
curl -s https://raw.githubusercontent.com/markshust/docker-magento/master/lib/template | bash -s -- magento-2

## for the latest (UNSTABLE) features use mage2click develop branch
curl -s https://raw.githubusercontent.com/mage2click/docker-magento/develp/lib/template | bash -s -- magento-2

# Remove existing src directory:
rm -rf src

# Replace with existing source code of your existing Magento instance:
cp ~/Sites/existing src
# or: git clone [email protected]:myrepo.git src

# Create a DNS host entry for the site:
echo "127.0.0.1 magento2.test" | sudo tee -a /etc/hosts

# Copy some files to the containers and install dependencies, then restart the containers:
docker-compose up -d
bin/copytocontainer --all

# Install composer dependencies, then copy artifacts back to the host:
bin/composer install
bin/copyfromcontainer vendor

# Import existing database:
bin/clinotty mysql -hdb -umagento -pmagento magento < existing/magento.sql

# Update database connection details:
# vi src/app/etc/env.php

# Set base URLs to local environment URL:
bin/magento config:set web/secure/base_url https://magento2.test/
bin/magento config:set web/unsecure/base_url https://magento2.test/

bin/restart

open https://magento2.test

For more details on how everything works, see the extended setup readme.

• bin/bash: Drop into the bash prompt of your Docker container. The phpfpm container should be mainly used to access the filesystem within Docker.
• bin/dev-urn-catalog-generate: Generate URN's for PHPStorm and remap paths to local host. Restart PHPStorm after running this command.
• bin/cli: Run any CLI command without going into the bash prompt. Ex. bin/cli ls
• bin/clinotty: Run any CLI command with no TTY. Ex. bin/clinotty chmod u+x bin/magento
• bin/composer: Run the composer binary. Ex. bin/composer install
• bin/copyfromcontainer: Copy folders or files from container to host. Ex. bin/copyfromcontainer vendor
• bin/copytocontainer: Copy folders or files from host to container. Ex. bin/copytocontainer --all
• bin/download: Download & extract specific Magento version to the src directory. Ex. bin/download 2.3.1
• bin/fixowns: This will fix filesystem ownerships within the container.
• bin/fixperms: This will fix filesystem permissions within the container.
• bin/grunt: Run the grunt binary. Note that this runs the version from the node_modules directory for project version parity. Ex. bin/grunt exec
• bin/magento: Run the Magento CLI. Ex: bin/magento cache:flush
• bin/node: Run the node binary. Ex. bin/node --version
• bin/npm: Run the npm binary. Ex. bin/npm install
• bin/redis: Run a command from the redis container. Ex bin/redis redis-cli monitor
• bin/remove: Remove all containers.
• bin/removevolumes: Remove all volumes.
• bin/restart: Stop and then start all containers.
• bin/root: Run any CLI command as root without going into the bash prompt. Ex bin/root apt-get install nano
• bin/rootnotty: Run any CLI command as root with no TTY. Ex bin/rootnotty chown -R app:app /var/www/html
• bin/setup: Run the Magento setup process to install Magento from the source code, with optional domain name. Defaults to magento2.test. Ex. bin/setup magento2.test
• bin/start: Start all containers, good practice to use this instead of docker-compose up -d, as it may contain additional helpers.
• bin/status: Check the container status.
• bin/stop: Stop all containers.
• bin/varnish: Run commands in the Varnish container. Ex bin/varnish varnishlog -q 'ReqURL ~ "^/$"' to monitor requests to homepage, or bin/vanirsh varnishlog -g request -q 'ReqMethod eq "PURGE"' to monitor PURGE requests
• bin/xdebug: Disable or enable Xdebug. Accepts params disable (default) or enable. Ex. bin/xdebug enable

The hostname of each service is the name of the service within the docker-compose.yml file. So for example, MySQL's hostname is db (not localhost) when accessing it from within a Docker container. Elasticsearch's hostname is elasticsearch.

Here's an example of how to connect to the MySQL cli tool of the Docker instance:

bin/cli mysql -h db -umagento -pmagento magento

You can use the bin/clinotty helper script to import a database. This example uses the root MySQL user, and looks for the dbdump.sql file in your local host directory:

bin/clinotty mysql -h db -u root -pmagento magento < dbdump.sql

First setup Magento Marketplace authentication (details in the DevDocs).

Copy src/auth.json.sample to src/auth.json. Then, update the username and password values with your Magento public and private keys, respectively. Finally, copy the file to the container by running bin/copytocontainer auth.json.

Redis is now the default cache and session storage engine, and is automatically configured & enabled when running bin/setup on new installs.

Use the following lines to enable Redis on existing installs:

Enable for Cache:

bin/magento setup:config:set --cache-backend=redis --cache-backend-redis-server=redis --cache-backend-redis-db=0

Enable for Session:

bin/magento setup:config:set --session-save=redis --session-save-redis-host=redis --session-save-redis-log-level=4 --session-save-redis-db=1

You may also monitor Redis by running: bin/redis redis-cli monitor

For more information about Redis usage with Magento, see the DevDocs.

Install and enable the PHP Debug extension from the Visual Studio Marketplace.

Otherwise, this project now automatically sets up Xdebug support with VS Code. If you wish to set this up manually, please see the .vscode/launch.json file.

1. First, install the Chrome Xdebug helper. After installed, right click on the Chrome icon for it and go to Options. Under IDE Key, select PHPStorm from the list and click Save.

2. Next, enable Xdebug in the PHP-FPM container by running: bin/xdebug enable, the restart the docker containers (CTRL+C then bin/start).

3. Then, open PHPStorm > Preferences > Languages & Frameworks > PHP and configure:

   • CLI Interpreter

     • Create a new interpreter and specify From Docker, and name it markoshust/magento-php:7-2-fpm.
     • Choose Docker, then select the markoshust/magento-php:7-2-fpm image name, and set the PHP Executable to php.

   • Path mappings

     • Don't do anything here as the next Docker container step will automatically setup a path mapping from /var/www/html to ./src.

   • Docker container

     • Remove any pre-existing volume bindings.
     • Ensure a volume binding has been setup for Container path of /var/www/html mapped to the Host path of ./src.

4. Open PHPStorm > Preferences > Languages & Frameworks > PHP > Debug and set Debug Port to 9001.

5. Open PHPStorm > Preferences > Languages & Frameworks > PHP > DBGp Proxy and set Port to 9001.

6. Open PHPStorm > Preferences > Languages & Frameworks > PHP > Servers and create a new server:

   • Set Name and Host to your domain name (ex. magento2.test)
   • Keep port set to 80
   • Check the Path Mappings box and map src to the absolute path of /var/www/html

7. Go to Run > Edit Configurations and create a new PHP Remote Debug configuration by clicking the plus sign and selecting it. Set the Name to your domain (ex. magento2.test). Check the Filter debug connection by IDE key checkbox, select the server you just setup, and under IDE Key enter PHPSTORM. This IDE Key should match the IDE Key set by the Chrome Xdebug Helper. Then click OK to finish setting up the remote debugger in PHPStorm.

8. Open up src/pub/index.php, and set a breakpoint near the end of the file. Go to Run > Debug 'magento2.test', and open up a web browser. Ensure the Chrome Xdebug helper is enabled by clicking on it > Debug. Navigate to your Magento store URL, and Xdebug within PHPStorm should now trigger the debugger and pause at the toggled breakpoint.

I'm a Certified Magento Developer & Architect and Zend Certified Engineer, and available for consulting & development of your next project 🤓. You can read technical articles on my blog at markshust.com or contact me directly at [email protected].

A special thanks goes out to Nexcess for hosting public archives of every version of Magento 💙. I've used their Magento hosting services in the past also (both shared and enteprise offerings) and they're great, ...highly recommended!

Implemented Varnish support with https proxy Willem Wigman

MIT