Ubuntu 19.10 Server for NanoPi R2S
Ubuntu 20.04 LTS for NanoPi R2S Mainline Kernel 5.7.y
This is the base Image for a small router, based on Kernel 5.4.25 and up for the NanoPi R2S
Release with Kernel version:
-
v0.2 - Kernel 5.4.27
-
v0.3 - Kernel 5.4.28
-
v0.4 - Kernel 5.6.2
-
v0.5f - fix root owner (/) on Ubuntu 20.04 LTS
-
v0.6k - Kernel 5.6.7
-
v0.7k - Kernel 5.7.0-rc3
-
v0.93 - Kernel 5.8.0-rc1 - Testing - Ext4 BUG fix
- i2c0
-
Interfaces
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.254.21 netmask 255.255.0.0 broadcast 192.168.255.255 ether 2a:5e:77:5a:8f:4f txqueuelen 1000 (Ethernet) RX packets 209 bytes 20463 (20.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 148 bytes 19872 (19.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 28 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.254.22 netmask 255.255.0.0 broadcast 192.168.255.255 inet6 2804:7f4:3081:9558:8470:9c35:984c:e8fe prefixlen 64 scopeid 0x0<global> inet6 fe80::fc67:30ff:fe6c:b94b prefixlen 64 scopeid 0x20<link> inet6 2804:7f4:3081:9558:fc67:30ff:fe6c:b94b prefixlen 64 scopeid 0x0<global> ether fe:67:30:6c:b9:4b txqueuelen 1000 (Ethernet) RX packets 1638 bytes 106543 (106.5 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1225 bytes 174911 (174.9 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 54 bytes 4832 (4.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 54 bytes 4832 (4.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.1
The "perfect" mini router with Ubuntu 19.10 for the NanoPi R2S. This mini router will isolate your local network from outside (internet / web).
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.2
NanoPi R2S Mini router configuration
rtl8821cu usb wlan
rtl8xxxu should be enough, added rtl8821cu for the sake of compatibility.
[48272.791672] usb 2-1: new high-speed USB device number 2 using ehci-platform
[48272.822407] usb 2-1: New USB device found, idVendor=0bda, idProduct=8176, bcdDevice= 2.00
[48272.822436] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[48272.822461] usb 2-1: Product: 802.11n WLAN Adapter
[48272.822477] usb 2-1: Manufacturer: Realtek
[48272.822492] usb 2-1: SerialNumber: 00e04c000001
[48273.267456] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[48273.290433] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[48274.431150] rtl8192cu: Chip version 0x10
[48274.532280] rtl8192cu: Board Type 0
[48274.532601] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[48274.532781] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[48274.534434] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[48274.537632] usbcore: registered new interface driver rtl8192cu
[48274.625790] usbcore: registered new interface driver rtl8xxxu
[48274.654369] rtl8192cu 2-1:1.0 wlx7cdd902fdefa: renamed from wlan0
-
Modules
Module Size Used by iptable_nat 16384 1 xt_MASQUERADE 20480 1 nf_nat 65536 2 iptable_nat,xt_MASQUERADE xt_conntrack 16384 2 nf_conntrack 151552 3 xt_conntrack,nf_nat,xt_MASQUERADE nf_defrag_ipv6 24576 1 nf_conntrack nf_defrag_ipv4 16384 1 nf_conntrack iptable_filter 16384 1 zram 40960 4 zsmalloc 28672 1 zram r8152 77824 0 crct10dif_ce 16384 1 uio_pdrv_genirq 16384 0 uio 24576 1 uio_pdrv_genirq sch_fq_codel 20480 3 ip_tables 32768 2 iptable_filter,iptable_nat x_tables 40960 4 xt_conntrack,iptable_filter,ip_tables,xt_MASQUERADE
filemanager-http
If you are not concerned about security you could run a file manager using a web browser, and configure nanopi-r2s as a gateway.
just run :
ubuntu@nanopi-r2s:~$ sudo /usr/local/bin/filemanager-httpd
ubuntu@nanopi-r2s:~$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.254.21 netmask 255.255.0.0 broadcast 192.168.255.255
inet6 fe80::285e:77ff:fe5a:8f4f prefixlen 64 scopeid 0x20<link>
inet6 2804:7f4:358b:2710:285e:77ff:fe5a:8f4f prefixlen 64 scopeid 0x0<global>
ether 2a:5e:77:5a:8f:4f txqueuelen 1000 (Ethernet)
RX packets 8636 bytes 11687238 (11.6 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5043 bytes 508024 (508.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 28
eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 255.255.1.255
ether 3e:1b:ee:4b:8e:11 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Configuring WAN (eth0)
You can configure your WAN interface as a DHCP, fixed IP or according to your service provider. Edit the file /etc/network/interfaces and change the eth0 configuration as desired, in my case i have DHCP (default):
-
Edit the file:
sudo jed /etc/network/interfaces -
File content
# interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 #allow-hotplug eth0 iface eth0 inet dhcp #allow-hotplug eth1 #iface eth1 inet dhcp auto eth1 iface eth1 inet static address 192.168.1.1 netmask 255.255.255.0 broadcast 255.255.1.255 #gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 #allow-hotplug wlan0 #iface wlan0 inet dhcp # wpa-ssid "foxy" # wpa-psk "1234567890" #address 192.168.254.55 #netmask 255.255.0.0 #gateway 192.168.254.254 #dns-nameservers 8.8.8.8 8.8.4.4 ####wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf # Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi) #wireless-mode Managed #wireless-power off
Client connection (DHCP)
A Linux desktop connected to the LAN interface of our mini router to surf the internet.
Kernel updated to 5.4.28 with eth-monitor to display the eth status for the WAN and LAN interface. When the WAN is up, the WAN led will be ON, when down, WAN led will be OFF.
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.3
Kernel updated to 5.6.2 with eth-monitor to display the eth status for the WAN and LAN interface. If WAN is up, the WAN led is ON, if down, WAN led is OFF. Same for the LAN interface.
eth-monitor runs as service. You can stop, start or see the status of the service.
sudo systemctl status eth-monitor.service
sudo systemctl stop eth-monitor.service
sudo systemctl start eth-monitor.service
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.4
Our mini router is kind of slow on the iptable NAT routing/fowarding and i can't find a way to optimize it or don't know how to do it. For this reason we will try the Ubuntu Beta version and see what we can get, all from scratch. In my experiments, the routing and forwarding is 8x slower than using the Gigabit port directly, maybe the NAT rules are overkill somewhere.
Add Initial support for rtl8822bu with Ubuntu Focal, the smallest Image size i could get, just for evaluation on RK3328 boards.
Ubuntu Focal 20.04 LTS Server
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.5
Fix DTB file name after install Kernel 5.6.5 before you reboot
Fix root owner:
sudo chown root:root /
Ubuntu 20.04 LTS Server with kernel update and minor fix.
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.7k
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.7i
-
Burn SD Card with etcher or Win32DiskImager
-
Use 7z to unzip
-
boot with this Img and login with: ubuntu / ubuntu
-
resize rootfs manually or try resize_rootfs.sh to reclaim all space in the sd card after login, issue the command in the shell:
sudo chmod +x resize_rootfs.sh sudo ./resize_rootfs.sh
It is safe to boost the NanoPi R2S to 1.5 GHz.
Instructions: https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.7s
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.8
-
Update to Mainline Kernel 5.7.0 Instructions
alex@svn:~/Downloads/arm/temp/linux-image-r2s$ssh [email protected] [email protected]'s password: Welcome to Ubuntu 20.04 LTS (GNU/Linux 5.7.0-rc3 aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage Last login: Mon Jun 1 21:27:16 2020 from 192.168.254.253 ubuntu@nanopi-r2s:~$ uname -ra Linux nanopi-r2s 5.7.0-rc3 #1 SMP PREEMPT Fri May 1 19:05:56 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux ubuntu@nanopi-r2s:~$ sudo dpkg -i linux-image-5.7.0_1.0-4.deb [sudo] password for ubuntu: Selecting previously unselected package linux-image-5.7.0. (Reading database ... 27521 files and directories currently installed.) Preparing to unpack linux-image-5.7.0_1.0-4.deb ... INFO: Updating Kernel 5.7.0-rc3 to 5.7.0 INFO: Updating... Unpacking linux-image-5.7.0 (1.0-4) ... Setting up linux-image-5.7.0 (1.0-4) ... OK: Kernel update success! Please reboot with: sync && sudo reboot ubuntu@nanopi-r2s:~$ sync && sudo reboot alex@svn:~/Downloads/arm/temp/linux-image-r2s$ ssh [email protected] ssh: connect to host 192.168.254.28 port 22: Connection refused alex@svn:~/Downloads/arm/temp/linux-image-r2s$ ssh [email protected] [email protected]'s password: Welcome to Ubuntu 20.04 LTS (GNU/Linux 5.7.0 aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage Last login: Mon Jun 1 21:51:41 2020 from 192.168.254.253 ubuntu@nanopi-r2s:~$ uname -ra Linux nanopi-r2s 5.7.0 #1 SMP PREEMPT Mon Jun 1 18:36:08 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux ubuntu@nanopi-r2s:~$ ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.254.28 netmask 255.255.0.0 broadcast 192.168.255.255 inet6 2804:7f4:3582:7134:48c0:a9ff:fe05:7e21 prefixlen 64 scopeid 0x0<global> inet6 fe80::48c0:a9ff:fe05:7e21 prefixlen 64 scopeid 0x20<link> ether 4a:c0:a9:05:7e:21 txqueuelen 1000 (Ethernet) RX packets 113 bytes 13611 (13.6 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 80 bytes 10844 (10.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 28 eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 ether 36:74:22:27:e5:47 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 80 bytes 5920 (5.9 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 80 bytes 5920 (5.9 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ubuntu@nanopi-r2s:~$ lsmod Module Size Used by r8152 86016 0 crct10dif_ce 20480 1 uio_pdrv_genirq 16384 0 uio 24576 1 uio_pdrv_genirq sch_fq_codel 20480 3 ip_tables 32768 0 x_tables 36864 1 ip_tables -
Benchmarking NanoPi R2S (Ubuntu 20.04 LTS)
ubuntu@nanopi-r2s:~$ 7z b 7-Zip [64] 16.02 : Copyright (c) 1999-2016 Igor Pavlov : 2016-05-21 p7zip Version 16.02 (locale=C.UTF-8,Utf16=on,HugeFiles=on,64 bits,4 CPUs LE) LE CPU Freq: - - - - - - - - - RAM size: 981 MB, # CPU hardware threads: 4 RAM usage: 882 MB, # Benchmark threads: 4 Compressing | Decompressing Dict Speed Usage R/U Rating | Speed Usage R/U Rating KiB/s % MIPS MIPS | KiB/s % MIPS MIPS 22: 1756 335 511 1708 | 52699 399 1126 4496 23: 1704 346 503 1736 | 50621 399 1098 4380 24: 1681 357 506 1808 | 48775 398 1075 4282 25: 1554 357 497 1775 | 46682 398 1043 4155 ---------------------------------- | ------------------------------ Avr: 349 504 1757 | 399 1086 4328 Tot: 374 795 3043 ubuntu@nanopi-r2s:~$ openssl speed -elapsed -evp aes-128-gcm aes-128-cbc sha256 You have chosen to measure elapsed time instead of user CPU time. Doing sha256 for 3s on 16 size blocks: 9157906 sha256's in 3.00s Doing sha256 for 3s on 64 size blocks: 7005608 sha256's in 3.00s Doing sha256 for 3s on 256 size blocks: 4197370 sha256's in 3.00s Doing sha256 for 3s on 1024 size blocks: 1604346 sha256's in 3.00s Doing sha256 for 3s on 8192 size blocks: 238620 sha256's in 3.00s Doing sha256 for 3s on 16384 size blocks: 120819 sha256's in 3.00s Doing aes-128 cbc for 3s on 16 size blocks: 10272884 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 64 size blocks: 2789016 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 256 size blocks: 717614 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 1024 size blocks: 180497 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 8192 size blocks: 22631 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 16384 size blocks: 11311 aes-128 cbc's in 3.00s Doing aes-128-gcm for 3s on 16 size blocks: 15047618 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 64 size blocks: 10948206 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 256 size blocks: 5234187 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 1024 size blocks: 1714462 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 8192 size blocks: 233941 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 16384 size blocks: 117441 aes-128-gcm's in 3.00s OpenSSL 1.1.1f 31 Mar 2020 built on: Mon Apr 20 11:53:50 2020 UTC options:bn(64,64) rc4(char) des(int) aes(partial) blowfish(ptr) compiler: gcc -fPIC -pthread -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -fdebug-prefix-map=/build/openssl-9j6sUa/openssl-1.1.1f=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_TLS_SECURITY_LEVEL=2 -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DVPAES_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2 The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes aes-128 cbc 54788.71k 59499.01k 61236.39k 61609.64k 61797.72k 61773.14k aes-128-gcm 80253.96k 233561.73k 446650.62k 585203.03k 638814.89k 641384.45k sha256 48842.17k 149452.97k 358175.57k 547616.77k 651591.68k 659832.83k ubuntu@nanopi-r2s:~$
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.9
Bump to 5.7.2
-
Update to Mainline Kernel 5.7.1 Instructions
ubuntu@nanopi-r2s:~$ uname -ra Linux nanopi-r2s 5.7.0 #1 SMP PREEMPT Mon Jun 1 18:36:08 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux ubuntu@nanopi-r2s:~$ sudo dpkg -i linux-image-5.7.1_1.0-5.deb [sudo] password for ubuntu: Selecting previously unselected package linux-image-5.7.1. (Reading database ... 30596 files and directories currently installed.) Preparing to unpack linux-image-5.7.1_1.0-5.deb ... INFO: Updating Kernel 5.7.0 to 5.7.1 INFO: Updating... Unpacking linux-image-5.7.1 (1.0-5) ... Setting up linux-image-5.7.1 (1.0-5) ... OK: Kernel update success! Please reboot with: sync && sudo reboot ubuntu@nanopi-r2s:~$ sync && sudo reboot Connection to 192.168.254.28 closed by remote host. Connection to 192.168.254.28 closed. alex@svn:~$ ssh [email protected] [email protected]'s password: Welcome to Ubuntu 20.04 LTS (GNU/Linux 5.7.1 aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage Last login: Wed Jun 10 23:16:02 2020 from 192.168.254.253 ubuntu@nanopi-r2s:~$ uname -ra Linux nanopi-r2s 5.7.1 #1 SMP PREEMPT Wed Jun 10 16:33:02 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.92
-
Update with:
ubuntu@nanopi-r2s:~$ sudo dpkg -i linux-image-5.7.2_1.0-6.deb [sudo] password for ubuntu: Selecting previously unselected package linux-image-5.7.2. (Reading database ... 32256 files and directories currently installed.) Preparing to unpack linux-image-5.7.2_1.0-6.deb ... INFO: Updating Kernel 5.7.1 to 5.7.2 INFO: Updating... Unpacking linux-image-5.7.2 (1.0-6) ... Setting up linux-image-5.7.2 (1.0-6) ... OK: Kernel update success! Please reboot with: sync && sudo reboot ubuntu@nanopi-r2s:~$ sync && sudo reboot Connection to 192.168.254.28 closed by remote host. Connection to 192.168.254.28 closed. alex@svn:~/Downloads/arm/temp/linux-image-r2s$ ssh [email protected] [email protected]'s password: Welcome to Ubuntu 20.04 LTS (GNU/Linux 5.7.2 aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage Last login: Thu Jun 11 22:29:48 2020 from 192.168.254.253 ubuntu@nanopi-r2s:~$ uname -ra Linux nanopi-r2s 5.7.2 #1 SMP PREEMPT Thu Jun 11 16:07:17 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux ubuntu@nanopi-r2s:~$ -
Benchmark
openssl speed -elapsed -evp aes-128-gcm aes-128-cbc sha256 rsa2048 You have chosen to measure elapsed time instead of user CPU time. Doing sha256 for 3s on 16 size blocks: 9122873 sha256's in 3.00s Doing sha256 for 3s on 64 size blocks: 7017831 sha256's in 3.00s Doing sha256 for 3s on 256 size blocks: 4204660 sha256's in 3.00s Doing sha256 for 3s on 1024 size blocks: 1606222 sha256's in 3.00s Doing sha256 for 3s on 8192 size blocks: 238559 sha256's in 3.00s Doing sha256 for 3s on 16384 size blocks: 120868 sha256's in 3.00s Doing aes-128 cbc for 3s on 16 size blocks: 10255999 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 64 size blocks: 2788401 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 256 size blocks: 717431 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 1024 size blocks: 180434 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 8192 size blocks: 22623 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 16384 size blocks: 11311 aes-128 cbc's in 3.00s Doing aes-128-gcm for 3s on 16 size blocks: 15163053 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 64 size blocks: 10972686 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 256 size blocks: 5234202 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 1024 size blocks: 1715158 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 8192 size blocks: 233819 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 16384 size blocks: 117411 aes-128-gcm's in 3.00s Doing 2048 bits private rsa's for 10s: 1385 2048 bits private RSA's in 10.00s Doing 2048 bits public rsa's for 10s: 51916 2048 bits public RSA's in 10.00s OpenSSL 1.1.1f 31 Mar 2020 built on: Mon Apr 20 11:53:50 2020 UTC options:bn(64,64) rc4(char) des(int) aes(partial) blowfish(ptr) compiler: gcc -fPIC -pthread -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -fdebug-prefix-map=/build/openssl-9j6sUa/openssl-1.1.1f=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_TLS_SECURITY_LEVEL=2 -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DVPAES_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2 The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes aes-128 cbc 54698.66k 59485.89k 61220.78k 61588.14k 61775.87k 61773.14k aes-128-gcm 80869.62k 234083.97k 446651.90k 585440.60k 638481.75k 641220.61k sha256 48655.32k 149713.73k 358797.65k 548257.11k 651425.11k 660100.44k sign verify sign/s verify/s rsa 2048 bits 0.007220s 0.000193s 138.5 5191.6
Initial support for kernel 5.8.0 , problems ahead...
Bootlog: https://gist.github.com/avafinger/5d4a65f27f856b479c5283854a556754
BUG fix: https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.93
Patch
https://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git/commit/?h=ext4-for-linus-5.8-rc1-2&id=7b97d868b7ab2448859668de9222b8af43f76e78
https://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git/diff/fs/ext4/mballoc.c?h=dev&id=811985365378df01386c3cfb7ff716e74ca376d5
-
Benchmark:
openssl speed -elapsed -evp aes-128-gcm aes-128-cbc sha256 rsa2048 You have chosen to measure elapsed time instead of user CPU time. Doing sha256 for 3s on 16 size blocks: 9173284 sha256's in 3.00s Doing sha256 for 3s on 64 size blocks: 7022912 sha256's in 3.00s Doing sha256 for 3s on 256 size blocks: 4207141 sha256's in 3.00s Doing sha256 for 3s on 1024 size blocks: 1606144 sha256's in 3.00s Doing sha256 for 3s on 8192 size blocks: 238573 sha256's in 3.00s Doing sha256 for 3s on 16384 size blocks: 119780 sha256's in 3.00s Doing aes-128 cbc for 3s on 16 size blocks: 10257397 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 64 size blocks: 2788000 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 256 size blocks: 717399 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 1024 size blocks: 180442 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 8192 size blocks: 22625 aes-128 cbc's in 3.00s Doing aes-128 cbc for 3s on 16384 size blocks: 11281 aes-128 cbc's in 3.00s Doing aes-128-gcm for 3s on 16 size blocks: 15111849 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 64 size blocks: 10972668 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 256 size blocks: 5235309 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 1024 size blocks: 1714633 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 8192 size blocks: 233792 aes-128-gcm's in 3.00s Doing aes-128-gcm for 3s on 16384 size blocks: 116256 aes-128-gcm's in 3.00s Doing 2048 bits private rsa's for 10s: 1386 2048 bits private RSA's in 10.01s Doing 2048 bits public rsa's for 10s: 51920 2048 bits public RSA's in 10.00s OpenSSL 1.1.1f 31 Mar 2020 built on: Mon Apr 20 11:53:50 2020 UTC options:bn(64,64) rc4(char) des(int) aes(partial) blowfish(ptr) compiler: gcc -fPIC -pthread -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -fdebug-prefix-map=/build/openssl-9j6sUa/openssl-1.1.1f=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_TLS_SECURITY_LEVEL=2 -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DVPAES_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2 The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes aes-128 cbc 54706.12k 59477.33k 61218.05k 61590.87k 61781.33k 61609.30k aes-128-gcm 80596.53k 234083.58k 446746.37k 585261.40k 638408.02k 634912.77k sha256 48924.18k 149822.12k 359009.37k 548230.49k 651463.34k 654158.51k sign verify sign/s verify/s rsa 2048 bits 0.007222s 0.000193s 138.5 5192.0
-
Remove unwanted services running on background
sudo apt-get remove whoopsie sudo apt autoremove --purge snapd sudo systemctl stop apt-daily.service sudo systemctl stop apt-daily-upgrade.service sudo systemctl mask apt-daily.service apt-daily-upgrade.service
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.94
Mainline Kernel 5.8.0 built on-board with gcc 9.3 to ensure it is really stable. Build was done with the yellow case. Thermal throttling has been adjusted to hit at 80ºC , so if you plan to use intensive cpu applications the board can reach 80ºC and scale down to 1.3 GHz, can also reach 85ºC really easy but will scale down to 1.2 GHz or even 1 GHz. During the kernel build with 4 cores 100% the board was running with 1.3 GHz most of the time.
Download linux-image 5.8.0 from here: https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.95
Welcome to Ubuntu 20.04 LTS (GNU/Linux 5.8.0+ aarch64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
Last login: Tue Aug 4 21:48:01 2020 from 192.168.254.103
- Installation
Before you upgrade kernel, make sure you have 26 MB free in /boot partition. Remove old kernels like this:
ubuntu@nanopi-r2s:~$ dpkg -l|grep linux-image
ii linux-image-5.6.7 1.0-2 arm64 Linux kernel 5.6.7
ii linux-image-5.7.0 1.0-4 arm64 Linux kernel 5.7.0
ii linux-image-5.7.0-rc3 1.0-3 arm64 Linux kernel 5.7.0-rc3
ii linux-image-5.7.1 1.0-5 arm64 Linux kernel 5.7.1
ii linux-image-5.7.2 1.0-6 arm64 Linux kernel 5.7.2
ii linux-image-5.8.0+ 1.0-9 arm64 Linux kernel 5.8.0+
ii linux-image-5.8.0-rc1 1.0-6 arm64 Linux kernel 5.8.0-rc1
ii linux-image-5.8.0-rc3 1.0-8 arm64 Linux kernel 5.8.0-rc3
ubuntu@nanopi-r2s:~$ sudo dpkg -r linux-image-5.8.0-rc1
[sudo] password for ubuntu:
(Reading database ... 43043 files and directories currently installed.)
Removing linux-image-5.8.0-rc1 (1.0-6) ...
ubuntu@nanopi-r2s:~$ sudo dpkg -r linux-image-5.8.0-rc3
(Reading database ... 40306 files and directories currently installed.)
Removing linux-image-5.8.0-rc3 (1.0-8) ...
ubuntu@nanopi-r2s:~$ sudo dpkg -r linux-image-5.7.1
(Reading database ... 37571 files and directories currently installed.)
Removing linux-image-5.7.1 (1.0-5) ...
ubuntu@nanopi-r2s:~$ sudo dpkg -r linux-image-5.6.7
(Reading database ... 35941 files and directories currently installed.)
Removing linux-image-5.6.7 (1.0-2) ...
ubuntu@nanopi-r2s:~$ sudo dpkg -r linux-image-5.7.0-rc3
(Reading database ... 33374 files and directories currently installed.)
Removing linux-image-5.7.0-rc3 (1.0-3) ...
ubuntu@nanopi-r2s:~$ dpkg -l|grep linux-image
ii linux-image-5.7.0 1.0-4 arm64 Linux kernel 5.7.0
ii linux-image-5.7.2 1.0-6 arm64 Linux kernel 5.7.2
ii linux-image-5.8.0+ 1.0-9 arm64 Linux kernel 5.8.0+
ubuntu@nanopi-r2s:~$
ubuntu@nanopi-r2s:~$ df -lh
Filesystem Size Used Avail Use% Mounted on
/dev/mmcblk0p2 15G 14G 652M 96% /
devtmpfs 478M 0 478M 0% /dev
tmpfs 489M 0 489M 0% /dev/shm
tmpfs 98M 3.1M 95M 4% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 489M 0 489M 0% /sys/fs/cgroup
/dev/mmcblk0p1 113M 52M 53M 50% /boot
tmpfs 98M 0 98M 0% /run/user/1000
ubuntu@nanopi-r2s:~$
Kernel 5.8.1 (mainline stable) for NanoPi R2S, Ubuntu 20.04 LTS
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.96
First impression with Kernel 5.9.0-rc1 (mainline RC) for NanoPi R2S, Ubuntu 20.04 LTS. Currently working:
- eth0
- eth1
- DVFS
issues
- no led on Eth1 interface (Link or Activities), but it's working.
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.97
First impression with Kernel 5.9.0-rc8 (mainline RC) for NanoPi R2S, Ubuntu 20.04 LTS. Currently working:
- eth0
- eth1
- DVFS
- pwm0 (fan)
- shutdown && reboot (fix)
Boot log
https://gist.github.com/avafinger/7f9b6ae613a2549fc834034dd4d81fd4
We are going to build a service to control the fan speed according to the cpu temperature. Mainline kernel has exposed the pwm0 where we can output voltage from 2.6v to 5.0v and control the fan speed.
Enabling the pwm0
sudo su
echo -n 0 > /sys/class/pwm/pwmchip0/export
pwm0 is now exposed as /sys/class/pwm/pwmchip0/pwm0
** Temp: 50000, duty: 999991, 0%
** Temp: 49545, duty: 999991, 0%
** Temp: 50000, duty: 999991, 0%
** Temp: 48636, duty: 999991, 0%
** Temp: 49545, duty: 999991, 0%
** Temp: 50416, duty: 999991, 0%
** Temp: 50416, duty: 999991, 0%
** Temp: 63750, duty: 491901, 75%
** Temp: 66923, duty: 491901, 75%
** Temp: 64583, duty: 491901, 75%
** Temp: 53750, duty: 891901, 25%
** Temp: 51250, duty: 991901, 5%
** Temp: 51666, duty: 991901, 5%
** Temp: 50416, duty: 999991, 0%
** Temp: 51250, duty: 991901, 5%
** Temp: 50416, duty: 999991, 0%
** Temp: 49090, duty: 999991, 0%
** Temp: 50833, duty: 999991, 0%
** Temp: 51250, duty: 991901, 5%
** Temp: 49545, duty: 999991, 0%
Source code for the tiny systemd service is available here: https://github.com/avafinger/fan-speed-control
At startup, the pwm0 pin drives 5v and make Fan full speed. The service will check the CPU Temp and try to drive the speed of the Fan, so the noise is minimum, or should be.
The service has been tested with good results with the snowfan that comes with NanoPi M3.
Testing the Kernel 5.10.0-rc1 (confirmed LTS ?) for NanoPi R2S. Currently working:
- eth0
- eth1
- DVFS
- pwm0 (fan)
- halt && reboot (halt )
After some testing, the shutdown command still not working and you need to use:
sudo halt
download linux-image 5.10.0-rc2
https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/releases/tag/v0.99
issues
-
eth0 bug (using the previous RTL driver)
Nov 1 13:22:00 nanopi-r2s kernel: [ 15.906125] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Nov 1 13:22:00 nanopi-r2s kernel: [ 15.906234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Nov 1 13:22:00 nanopi-r2s kernel: [ 15.924903] BUG: spinlock bad magic on CPU#3, swapper/3/0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.925429] lock: 0xffffff8001aa1690, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.926163] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.0-rc1 #1 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.926722] Hardware name: FriendlyElec NanoPi R2S (DT) Nov 1 13:22:00 nanopi-r2s kernel: [ 15.927191] Call trace: Nov 1 13:22:00 nanopi-r2s kernel: [ 15.927430] dump_backtrace+0x0/0x1e8 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.927767] show_stack+0x2c/0x80 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.928075] dump_stack+0xc8/0x11c Nov 1 13:22:00 nanopi-r2s kernel: [ 15.928386] spin_dump+0x80/0xa0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.928680] do_raw_spin_lock+0xf4/0x118 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.929039] _raw_spin_lock_irqsave+0x60/0xc0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.929438] stmmac_tx_timer+0x5c/0xc0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.929788] call_timer_fn+0x3c/0x200 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.930126] run_timer_softirq+0x530/0x568 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.930498] __do_softirq+0x140/0x3fc Nov 1 13:22:00 nanopi-r2s kernel: [ 15.930841] irq_exit+0xd4/0xe0 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.931134] __handle_domain_irq+0x90/0xf8 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.931512] efi_header_end+0xb4/0xd8 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.931847] el1_irq+0xb8/0x180 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.932141] cpuidle_enter_state+0xbc/0x448 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.932522] cpuidle_enter+0x3c/0x50 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.932856] call_cpuidle+0x44/0x78 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.933183] do_idle+0x22c/0x290 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.933486] cpu_startup_entry+0x28/0x68 Nov 1 13:22:00 nanopi-r2s kernel: [ 15.933854] secondary_start_kernel+0x190/0x1e0 Nov 1 17:50:06 nanopi-r2s kernel: [15971.531102] rk_gmac-dwmac ff540000.ethernet eth0: Link is Down Nov 1 17:50:11 nanopi-r2s kernel: [15976.080915] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Nov 1 17:50:11 nanopi-r2s kernel: [15976.083507] r8152 5-1:1.0 eth1: carrier on
The problem seems to be the RTL eth0 driver, but the same driver works just fine on NanoPi M4.
Bootlog with eth0 and eth1 connected to the LAN
https://gist.github.com/avafinger/9e60f1d607e3ba66f06158334b3165a0
Bootlog with eth1 connected to the LAN https://gist.github.com/avafinger/80e4cbcefdc43a51c080ae1a8928498f
ubuntu@nanopi-r2s:~$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.254.28 netmask 255.255.0.0 broadcast 192.168.255.255
inet6 2804:7f4:3580:4e5c:387a:74ff:fe7a:4334 prefixlen 64 scopeid 0x0<global>
inet6 fe80::387a:74ff:fe7a:4334 prefixlen 64 scopeid 0x20<link>
ether 3a:7a:74:7a:43:34 txqueuelen 1000 (Ethernet)
RX packets 596 bytes 49830 (49.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 74 bytes 7504 (7.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 36
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.254.67 netmask 255.255.0.0 broadcast 192.168.255.255
inet6 2804:7f4:3580:4e5c:d0c2:994e:11fb:7959 prefixlen 64 scopeid 0x0<global>
inet6 2804:7f4:3580:4e5c:40f7:a7ff:fe28:de72 prefixlen 64 scopeid 0x0<global>
inet6 fe80::40f7:a7ff:fe28:de72 prefixlen 64 scopeid 0x20<link>
ether 42:f7:a7:28:de:72 txqueuelen 1000 (Ethernet)
RX packets 367 bytes 30985 (30.9 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 598 bytes 104090 (104.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
When you turn ON the board, the 3 leds will go ON for a few seconds and later WAN and LAN leds will show the status link.
Linux nanopi-r2s 5.6.1 #2 SMP PREEMPT Thu Apr 2 19:50:55 -03 2020 aarch64 aarch64 aarch64 GNU/Linux
- eth0 (ok)
- eth1 (ok)
- DVFS (ok)
- eth link status monitoring (ok)
Checking the board health (manually)
cat /sys/devices/virtual/thermal/thermal_zone0/temp
38181
cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq
408000
cat /sys/devices/platform/ff160000.i2c/i2c-1/1-0018/regulator/regulator.8/microvolts
950000
Kernel has support for leds so we can control the available leds on the board.
sudo su
cd /sys/class/leds/
root@nanopi-r2s:/sys/class/leds# ls
lan_led status_led wan_led
The available options are:
[none] rc-feedback rfkill-any rfkill-none kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock mmc0 timer oneshot heartbeat gpio cpu cpu0 cpu1 cpu2 cpu3 default-on panic
-
To turn on the wan_led
echo "default-on" > /sys/class/leds/wan_led/trigger
-
To turn off the wan_led
echo "none" > /sys/class/leds/wan_led/trigger
We can now move on and install a service to show the status of our WAN and LAN interfaces turning the wan_led and lan_led ON and OFF.
Monitor the health of NanoPi R2S with htop.
-
Install
wget https://github.com/avafinger/nanopi-r2s-ubuntu-server-minimal-image/raw/master/htop_2.2.2-1_arm64.deb sudo dpkg -i htop_2.2.2-1_arm64.deb
-
Source code (updated)
https://github.com/avafinger/htop_2.2.2
I did a simple test to check if the USB Realtek RTL8152-B is working at Gb speed and compared to my PCI Gb in my linux box. My internet connections is 25 Mb, so i download 1GB of data and compare both.
gigabit PCI (linux box X64)
[ 2.079301] r8169 0000:02:00.0 eth0: RTL8168c/8111c, e0:cb:4e:81:11:5a, XID 3c4, IRQ 17
alex@svn:~$ wget https://speed.hetzner.de/1GB.bin
--2020-04-04 15:43:25-- https://speed.hetzner.de/1GB.bin
Resolving speed.hetzner.de (speed.hetzner.de)... 2a01:4f8:0:59ed::2, 88.198.248.254
Connecting to speed.hetzner.de (speed.hetzner.de)|2a01:4f8:0:59ed::2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1048576000 (1000M) [application/octet-stream]
Saving to: ‘1GB.bin.1’
1GB.bin.1 5%[> ] 50,87M 2,71MB/s eta 8m 2s ^C
gigabit USB (NanoPi R2S eth1 = LAN)
[ 11.032460] r8152 5-1:1.0 (unnamed net_device) (uninitialized): Random ether addr 4e:86:d7:06:7f:9d
ubuntu@nanopi-r2s:~$ wget https://speed.hetzner.de/1GB.bin
--2020-04-04 18:44:02-- https://speed.hetzner.de/1GB.bin
Resolving speed.hetzner.de (speed.hetzner.de)... 2a01:4f8:0:59ed::2, 88.198.248.254
Connecting to speed.hetzner.de (speed.hetzner.de)|2a01:4f8:0:59ed::2|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1048576000 (1000M) [application/octet-stream]
Saving to: ‘1GB.bin.1’
1GB.bin.1 5%[> ] 50.91M 2.70MB/s eta 8m 11s ^C
There is a button available called reset button and can be red as an event with mainline kernel. You can check the status of the button like this:
ubuntu@nanopi-r2s:~$ sudo evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: rk805 pwrkey
/dev/input/event1: gpio-keys
Select the device event number [0-1]: 1
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "gpio-keys"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 257 (BTN_1)
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 250
Repeat code 1 (REP_PERIOD)
Value 33
Properties:
Testing ... (interrupt to exit)
Event: time 1587947451.537380, type 1 (EV_KEY), code 257 (BTN_1), value 1
Event: time 1587947451.537380, -------------- SYN_REPORT ------------
Event: time 1587947451.793277, type 1 (EV_KEY), code 257 (BTN_1), value 2
Event: time 1587947451.793277, -------------- SYN_REPORT ------------
Event: time 1587947451.793277, type 1 (EV_KEY), code 257 (BTN_1), value 0
Event: time 1587947451.793277, -------------- SYN_REPORT ------------
Event: time 1587947465.053375, type 1 (EV_KEY), code 257 (BTN_1), value 1
Event: time 1587947465.053375, -------------- SYN_REPORT ------------
Event: time 1587947465.309248, type 1 (EV_KEY), code 257 (BTN_1), value 2
Event: time 1587947465.309248, -------------- SYN_REPORT ------------
Event: time 1587947465.349248, type 1 (EV_KEY), code 257 (BTN_1), value 2
Event: time 1587947465.349248, -------------- SYN_REPORT ------------
Event: time 1587947465.389243, type 1 (EV_KEY), code 257 (BTN_1), value 2
Event: time 1587947465.389243, -------------- SYN_REPORT ------------
Event: time 1587947465.389243, type 1 (EV_KEY), code 257 (BTN_1), value 0
Event: time 1587947465.389243, -------------- SYN_REPORT ------------
Or check if it is working like this:
ubuntu@nanopi-r2s:~$ sudo cat /dev/input/event1|hexdump
0000000 2751 5ea6 0000 0000 f482 0007 0000 0000
0000010 0001 0101 0001 0000 2751 5ea6 0000 0000
0000020 f482 0007 0000 0000 0000 0000 0000 0000
0000030 2751 5ea6 0000 0000 bd51 000b 0000 0000
0000040 0001 0101 0000 0000 2751 5ea6 0000 0000
0000050 bd51 000b 0000 0000 0000 0000 0000 0000
0000060 2756 5ea6 0000 0000 8e6a 000b 0000 0000
0000070 0001 0101 0001 0000 2756 5ea6 0000 0000
0000080 8e6a 000b 0000 0000 0000 0000 0000 0000
0000090 2757 5ea6 0000 0000 33c5 0000 0000 0000
00000a0 0001 0101 0002 0000 2757 5ea6 0000 0000
00000b0 33c5 0000 0000 0000 0000 0000 0001 0000
00000c0 2757 5ea6 0000 0000 d000 0000 0000 0000
00000d0 0001 0101 0002 0000 2757 5ea6 0000 0000
00000e0 d000 0000 0000 0000 0000 0000 0001 0000
00000f0 2757 5ea6 0000 0000 6c3f 0001 0000 0000
0000100 0001 0101 0002 0000 2757 5ea6 0000 0000
0000110 6c3f 0001 0000 0000 0000 0000 0001 0000
0000120 2757 5ea6 0000 0000 6c3f 0001 0000 0000
0000130 0001 0101 0000 0000 2757 5ea6 0000 0000
0000140 6c3f 0001 0000 0000 0000 0000 0000 0000
0000150 2757 5ea6 0000 0000 e614 000c 0000 0000
0000160 0001 0101 0001 0000 2757 5ea6 0000 0000
0000170 e614 000c 0000 0000 0000 0000 0000 0000
0000180 2758 5ea6 0000 0000 ef85 0000 0000 0000
0000190 0001 0101 0000 0000 2758 5ea6 0000 0000
00001a0 ef85 0000 0000 0000 0000 0000 0000 0000
- add Kernel 5.4.25 (initial commit)
- add support for rtl8821cu usb (v0.2)
- add Kernel 5.4.27 (v0.2)
- add NanoPi R2S mini router (v0.2)
- add Kernel 5.4.28 (v0.3)
- add NanoPi R2S mini router with eth-monitor (v0.3)
- add Kernel 5.6.2 (v0.4)
- add Kernel 5.6.5 and rtl8822bu (v0.5)
- add Kernel 5.6.7 and some fix (v0.6k and v0.6)
- add Ubuntu 20.04 LTS Focal Fossa
- add Kernel 5.7.0-rc3
- add Kernel 5.7.0-rc3 (2GB Image)
- add Kernel 5.7.0 (mainline kernel)
- add Kernel 5.7.1 (stable kernel)
- add Kernel 5.7.2 (stable kernel)
- add Kernel 5.8.0-rc (mainline kernel rc)
- add Kernel 5.8.0 (linus mainline kernel)
- add Kernel 5.9.0 (mainline)
- add NAT rules
- reduce boot times
- remove unwanted services
- Create SD CARD Image
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.8.0 (ubuntu@nanopi-r2s) (gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Tue Aug 4 13:30:59 UTC 2020
[ 0.000000] Machine model: FriendlyElec NanoPi R2S
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] On node 0 totalpages: 261632
[ 0.000000] DMA zone: 4088 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 261632 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 32 pages/cpu s91112 r8192 d31768 u131072
[ 0.000000] pcpu-alloc: s91112 r8192 d31768 u131072 alloc=32*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 982048K/1046528K available (13436K kernel code, 1782K rwdata, 5164K rodata, 4992K init, 800K bss, 48096K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 44405 entries in 174 pages
[ 0.000000] ftrace: allocated 174 pages with 5 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x538 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000011] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000846] Console: colour dummy device 80x25
[ 0.001645] printk: console [tty0] enabled
[ 0.001726] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001769] pid_max: default: 32768 minimum: 301
[ 0.002016] LSM: Security Framework initializing
[ 0.002176] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002220] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.005517] rcu: Hierarchical SRCU implementation.
[ 0.009452] EFI services will not be available.
[ 0.010506] smp: Bringing up secondary CPUs ...
[ 0.011648] Detected VIPT I-cache on CPU1
[ 0.011754] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.013183] Detected VIPT I-cache on CPU2
[ 0.013277] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014586] Detected VIPT I-cache on CPU3
[ 0.014672] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.014896] smp: Brought up 1 node, 4 CPUs
[ 0.015045] SMP: Total of 4 processors activated.
[ 0.015077] CPU features: detected: 32-bit EL0 Support
[ 0.015112] CPU features: detected: CRC32 instructions
[ 0.041594] CPU: All CPU(s) started at EL2
[ 0.041709] alternatives: patching kernel code
[ 0.044090] devtmpfs: initialized
[ 0.062810] Registered cp15_barrier emulation handler
[ 0.062876] Registered setend emulation handler
[ 0.063793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.063867] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.065439] pinctrl core: initialized pinctrl subsystem
[ 0.066498] thermal_sys: Registered thermal governor 'fair_share'
[ 0.066504] thermal_sys: Registered thermal governor 'step_wise'
[ 0.067261] DMI not present or invalid.
[ 0.068350] NET: Registered protocol family 16
[ 0.069324] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.069420] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.069503] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.069661] audit: initializing netlink subsys (disabled)
[ 0.070033] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
[ 0.071433] cpuidle: using governor ladder
[ 0.071511] cpuidle: using governor menu
[ 0.071986] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.072230] ASID allocator initialised with 65536 entries
[ 0.140987] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.141040] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.141070] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.141099] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.144336] cryptd: max_cpu_qlen set to 1000
[ 0.158098] iommu: Default domain type: Translated
[ 0.160063] SCSI subsystem initialized
[ 0.160552] libata version 3.00 loaded.
[ 0.160936] usbcore: registered new interface driver usbfs
[ 0.161059] usbcore: registered new interface driver hub
[ 0.161257] usbcore: registered new device driver usb
[ 0.161415] mc: Linux media interface: v0.10
[ 0.161488] videodev: Linux video capture interface: v2.00
[ 0.161604] pps_core: LinuxPPS API ver. 1 registered
[ 0.161631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.161688] PTP clock support registered
[ 0.162688] Advanced Linux Sound Architecture Driver Initialized.
[ 0.163892] Bluetooth: Core ver 2.22
[ 0.164011] NET: Registered protocol family 31
[ 0.164037] Bluetooth: HCI device and connection manager initialized
[ 0.164083] Bluetooth: HCI socket layer initialized
[ 0.164128] Bluetooth: L2CAP socket layer initialized
[ 0.164189] Bluetooth: SCO socket layer initialized
[ 0.164249] NetLabel: Initializing
[ 0.164273] NetLabel: domain hash size = 128
[ 0.164295] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.164424] NetLabel: unlabeled traffic allowed by default
[ 0.165652] clocksource: Switched to clocksource arch_sys_counter
[ 1.824696] VFS: Disk quotas dquot_6.6.0
[ 1.824863] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.825198] FS-Cache: Loaded
[ 1.841298] NET: Registered protocol family 2
[ 1.842540] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear)
[ 1.842642] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.842803] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.843236] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.843530] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)
[ 1.843659] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)
[ 1.844402] NET: Registered protocol family 1
[ 1.845563] RPC: Registered named UNIX socket transport module.
[ 1.845608] RPC: Registered udp transport module.
[ 1.845708] RPC: Registered tcp transport module.
[ 1.845734] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.845780] PCI: CLS 0 bytes, default 64
[ 1.846191] Trying to unpack rootfs image as initramfs...
[ 1.926681] Freeing initrd memory: 1076K
[ 1.928480] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.938236] Initialise system trusted keyrings
[ 1.938700] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.954061] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.954701] FS-Cache: Netfs 'nfs' registered for caching
[ 1.955813] NFS: Registering the id_resolver key type
[ 1.955899] Key type id_resolver registered
[ 1.955926] Key type id_legacy registered
[ 1.955971] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.956466] fuse: init (API version 7.31)
[ 2.031094] Key type asymmetric registered
[ 2.031147] Asymmetric key parser 'x509' registered
[ 2.031263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.031633] io scheduler mq-deadline registered
[ 2.031669] io scheduler kyber registered
[ 2.039911] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[ 2.046699] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[ 2.046755] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 2.047765] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 2.051134] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
[ 2.127111] printk: console [ttyS2] enabled
[ 2.131621] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe] *ERROR* No available vop found for display-subsystem.
[ 2.146516] brd: module loaded
[ 2.168081] loop: module loaded
[ 2.171852] libphy: Fixed MDIO Bus: probed
[ 2.174003] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 2.174633] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 2.175432] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 2.176197] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 2.176848] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[ 2.177373] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[ 2.177962] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 2.178656] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[ 2.179291] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 2.184879] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 2.185872] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 2.186550] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
[ 2.187038] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
[ 2.187721] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
[ 2.188407] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[ 2.188889] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[ 2.189539] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[ 2.190221] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[ 2.190767] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[ 2.191303] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.253668] libphy: stmmac: probed
[ 2.258741] PPP generic driver version 2.4.2
[ 2.259592] usbcore: registered new interface driver asix
[ 2.260183] usbcore: registered new interface driver ax88179_178a
[ 2.260796] usbcore: registered new interface driver cdc_ether
[ 2.261396] usbcore: registered new interface driver qmi_wwan
[ 2.265861] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[ 2.266429] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[ 2.269563] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator
[ 2.270521] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator
[ 2.401767] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[ 2.402978] dwc2 ff580000.usb: DWC OTG Controller
[ 2.403466] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[ 2.404169] dwc2 ff580000.usb: irq 29, io mem 0xff580000
[ 2.405055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.405869] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.406536] usb usb1: Product: DWC OTG Controller
[ 2.406971] usb usb1: Manufacturer: Linux 5.8.0 dwc2_hsotg
[ 2.407479] usb usb1: SerialNumber: ff580000.usb
[ 2.409024] hub 1-0:1.0: USB hub found
[ 2.409443] hub 1-0:1.0: 1 port detected
[ 2.411564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.412216] ehci-pci: EHCI PCI platform driver
[ 2.412719] ehci-platform: EHCI generic platform driver
[ 2.415991] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 2.416576] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[ 2.417522] ehci-platform ff5c0000.usb: irq 30, io mem 0xff5c0000
[ 2.433686] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 2.434725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.435495] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436163] usb usb2: Product: EHCI Host Controller
[ 2.436612] usb usb2: Manufacturer: Linux 5.8.0 ehci_hcd
[ 2.437101] usb usb2: SerialNumber: ff5c0000.usb
[ 2.438633] hub 2-0:1.0: USB hub found
[ 2.439072] hub 2-0:1.0: 1 port detected
[ 2.440360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.440981] ohci-platform: OHCI generic platform driver
[ 2.442187] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 2.442855] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[ 2.443812] ohci-platform ff5d0000.usb: irq 31, io mem 0xff5d0000
[ 2.506059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 2.506828] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.507496] usb usb3: Product: Generic Platform OHCI controller
[ 2.508037] usb usb3: Manufacturer: Linux 5.8.0 ohci_hcd
[ 2.508532] usb usb3: SerialNumber: ff5d0000.usb
[ 2.510051] hub 3-0:1.0: USB hub found
[ 2.510478] hub 3-0:1.0: 1 port detected
[ 2.512742] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.513307] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[ 2.514406] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 2.515386] xhci-hcd xhci-hcd.0.auto: irq 166, io mem 0xff600000
[ 2.516767] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 2.517533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.518309] usb usb4: Product: xHCI Host Controller
[ 2.518765] usb usb4: Manufacturer: Linux 5.8.0 xhci-hcd
[ 2.519260] usb usb4: SerialNumber: xhci-hcd.0.auto
[ 2.520803] hub 4-0:1.0: USB hub found
[ 2.521235] hub 4-0:1.0: 1 port detected
[ 2.522378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.522925] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 2.523645] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.524397] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.525385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 2.526246] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.526908] usb usb5: Product: xHCI Host Controller
[ 2.527358] usb usb5: Manufacturer: Linux 5.8.0 xhci-hcd
[ 2.527846] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 2.529452] hub 5-0:1.0: USB hub found
[ 2.529917] hub 5-0:1.0: 1 port detected
[ 2.531243] usbcore: registered new interface driver cdc_acm
[ 2.531778] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.532585] usbcore: registered new interface driver cdc_wdm
[ 2.533684] usbcore: registered new interface driver uas
[ 2.534442] usbcore: registered new interface driver usb-storage
[ 2.535181] usbcore: registered new interface driver usbserial_generic
[ 2.535817] usbserial: USB Serial support registered for generic
[ 2.536470] usbcore: registered new interface driver ch341
[ 2.537007] usbserial: USB Serial support registered for ch341-uart
[ 2.537706] usbcore: registered new interface driver cp210x
[ 2.538249] usbserial: USB Serial support registered for cp210x
[ 2.538936] usbcore: registered new interface driver ftdi_sio
[ 2.539498] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.540535] usbcore: registered new interface driver option
[ 2.541083] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.542328] usbcore: registered new interface driver pl2303
[ 2.542901] usbserial: USB Serial support registered for pl2303
[ 2.543562] usbcore: registered new interface driver qcserial
[ 2.544129] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.545699] mousedev: PS/2 mouse device common for all mice
[ 2.547349] i2c /dev entries driver
[ 2.553317] rk808 1-0018: chip id: 0x8050
[ 2.561612] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.562315] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.563017] DCDC_REG1: supplied by vcc_sys
[ 2.566438] DCDC_REG2: supplied by vcc_sys
[ 2.568799] DCDC_REG3: supplied by vcc_sys
[ 2.569799] DCDC_REG4: supplied by vcc_sys
[ 2.571811] LDO_REG1: supplied by vcc_io
[ 2.575713] LDO_REG2: supplied by vcc_io
[ 2.579573] LDO_REG3: supplied by vcc_io
[ 2.593375] rk808-rtc rk808-rtc: registered as rtc0
[ 2.595731] rk808-rtc rk808-rtc: setting system clock to 2020-08-04T22:32:51 UTC (1596580371)
[ 2.598807] input: rk805 pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/rk805-pwrkey/input/input0
[ 2.600934] IR NEC protocol handler initialized
[ 2.606952] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
[ 2.607763] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
[ 2.611233] device-mapper: uevent: version 1.0.3
[ 2.612263] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: [email protected]
[ 2.619298] sdhci: Secure Digital Host Controller Interface driver
[ 2.619892] sdhci: Copyright(c) Pierre Ossman
[ 2.620293] Synopsys Designware Multimedia Card Interface Driver
[ 2.622225] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.622951] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
[ 2.623582] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
[ 2.624206] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 2.625199] vcc_sd: supplied by vcc_io
[ 2.644401] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.658649] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.661886] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.663276] hid: raw HID events driver (C) Jiri Kosina
[ 2.664618] usbcore: registered new interface driver usbhid
[ 2.665162] usbhid: USB HID core driver
[ 2.671805] drop_monitor: Initializing network drop monitor service
[ 2.672746] Initializing XFRM netlink socket
[ 2.674393] NET: Registered protocol family 10
[ 2.677442] Segment Routing with IPv6
[ 2.681704] bpfilter: Loaded bpfilter_umh pid 153
[ 2.682939] NET: Registered protocol family 17
[ 2.683921] Bluetooth: RFCOMM TTY layer initialized
[ 2.684423] Bluetooth: RFCOMM socket layer initialized
[ 2.684942] Bluetooth: RFCOMM ver 1.11
[ 2.685313] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.685937] Bluetooth: HIDP socket layer initialized
[ 2.686567] Key type dns_resolver registered
[ 2.688074] registered taskstats version 1
[ 2.688498] Loading compiled-in X.509 certificates
[ 2.689100] Key type ._fscrypt registered
[ 2.689479] Key type .fscrypt registered
[ 2.689900] Key type fscrypt-provisioning registered
[ 2.742535] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.745471] ALSA device list:
[ 2.745539] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 2.745832] No soundcards found.
[ 2.747444] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[ 2.747459] random: fast init done
[ 2.754856] Freeing unused kernel memory: 4992K
[ 2.755391] Run /init as init process
[ 2.755730] with arguments:
[ 2.755737] /init
[ 2.755741] earlyprintk
[ 2.755748] with environment:
[ 2.755754] HOME=/
[ 2.755759] TERM=linux
[ 4.241202] dwmmc_rockchip ff500000.dwmmc: Successfully tuned phase to 91
[ 4.241978] mmc0: new ultra high speed SDR50 SDHC card at address aaaa
[ 4.244739] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 4.254350] mmcblk0: p1 p2
[ 4.913985] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.936256] usb 5-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[ 4.937050] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.937774] usb 5-1: Product: USB 10/100/1000 LAN
[ 4.938225] usb 5-1: Manufacturer: Realtek
[ 4.938619] usb 5-1: SerialNumber: 000000000000
[ 7.903077] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 8.671037] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 8.675174] systemd[1]: Detected architecture arm64.
[ 8.736649] systemd[1]: Set hostname to <nanopi-r2s>.
[ 8.742876] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 9.253404] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 9.357084] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.358715] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.369929] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.370932] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.381898] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.383201] systemd[1]: Listening on udev Control Socket.
[ 9.385140] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.398697] systemd[1]: Listening on Journal Socket.
[ 9.625961] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
[ 10.646309] systemd-journald[224]: Received request to flush runtime journal from PID 1
[ 10.957517] usbcore: registered new interface driver r8152
[ 11.132697] usb 5-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 11.168807] r8152 5-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[ 11.169708] r8152 5-1:1.0 (unnamed net_device) (uninitialized): Random ether addr 9e:4b:18:5c:76:07
[ 11.190593] r8152 5-1:1.0: load rtl8153b-2 v1 10/23/19 successfully
[ 11.232519] r8152 5-1:1.0 eth1: v1.11.11
[ 11.406329] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.406389] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 11.697249] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
[ 11.717790] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[ 11.717817] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[ 11.717836] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode
[ 12.778878] zram: Added device: zram0
[ 12.782334] zram: Added device: zram1
[ 12.783518] zram: Added device: zram2
[ 12.784568] zram: Added device: zram3
[ 12.915028] zram0: detected capacity change from 0 to 128577536
[ 13.993737] Adding 125560k swap on /dev/zram0. Priority:5 extents:1 across:125560k SSFS
[ 14.006647] zram1: detected capacity change from 0 to 128577536
[ 15.073718] Adding 125560k swap on /dev/zram1. Priority:5 extents:1 across:125560k SSFS
[ 15.078087] zram2: detected capacity change from 0 to 128577536
[ 15.806907] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 15.807003] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.145716] Adding 125560k swap on /dev/zram2. Priority:5 extents:1 across:125560k SSFS
[ 16.149344] zram3: detected capacity change from 0 to 128577536
[ 16.477703] random: crng init done
[ 16.477722] random: 7 urandom warning(s) missed due to ratelimiting
[ 16.581862] Adding 125560k swap on /dev/zram3. Priority:5 extents:1 across:125560k SSFS
I would like to thank the Folks at FriendlyElec for the sample board and the work on the kernel side. The current Kernel version 5.7.0 release is the stable Linux Kernel with the FriendlyElec's work on USB3. The benchmark sample was taken with nanoPi R2S without case, your results may vary.