Heavily configurable CLI tool to add channels from M3U playlist into Cesbo Astra 5.

To simplify the process of adding new, updating and removing astra streams and it's inputs.

It connects to astra using API, reads its config (mostly streams), adds M3U channels into it from --m3uPath by rules defined in --programCfgPath and sends requests to astra to modify config.

Unless --programCfgPath is specified, on first run it creates default program config in current directory and terminates. Tweak it to suit your needs and start the program again.

See releases page

• --version and --help goes to stdout.
  Logs goes to stderr.

• It is possible to add streams from one instance of astra to another one, for example:

  m3u_merge_astra -m http://another_astra:8005/playlist.m3u8 -a 127.0.0.1:8002 -u admin -p admin

• It is possible to use dummy M3U file to run independent tasks such as uniting inputs, removing dead ones, filtering etc., for example:

  touch dummy.m3u
  m3u_merge_astra -m dummy.m3u -u admin -p admin

• When streams.remove_dead_inputs is enabled, progress of removing dead inputs from streams is printed every 30 seconds.

• general
  General settings of the program.

  • full_translit
    Use name transliteration to detect which M3U channel corresponds a stream?

  • full_translit_map
    Source to destination character mapping.
    All symbols are lowercase as comparsion function will convert every character in a name to lowercase.
    Key: From. Value: To.

  • similar_translit
    Use name transliteration between visually similar characters to detect which M3U channel corresponds a stream?

  • similar_translit_map
    Source to destination character mapping. All symbols are lowercase as comparsion function will convert every character in a name to lowercase.
    Key: From. Value: To.

  • name_aliases
    Use name aliases list to detect which M3U channel corresponds a stream?

  • name_alias_list
    List of lists. Names defined here will be considered identical to any other name in the same nested group. During comparsion, names will be simplified (lowercase, no special characters except the + sign), but not transliterated.

  • astra_api_resp_timeout
    Astra API response timeout.

  • merge_categories
    Should duplicated categories be removed with unique groups combined per category?

• m3u
  M3U related settings of the program.

  • resp_timeout
    M3U playlist URL response timeout in seconds.

  • chann_name_blacklist
    List of regular expressions.
    If any expression match name of a channel, this channel will be removed from M3U input before merging.

  • chann_group_blacklist
    List of regular expressions.
    If any expression match group of a channel, this channel will be removed from M3U input before merging.
    It runs after replacing groups by chann_group_map so enter the appropriate values.

  • chann_url_blacklist
    List of regular expressions.
    If any expression match URL of a channel, this channel will be removed from M3U input before merging.

  • chann_group_map
    Invalid to valid M3U channel group mapping.
    Key: From. Value: To.

• streams
  Astra streams related settings of the program.

  • added_prefix
    New stream name prefix.
    Safe to set to ''.

    Why does it exist?
    To distinguish between regular streams and streams added by this program.

  • add_new
    Add new astra streams if streams does not contain M3U channel name?

  • add_groups_to_new
    Add groups to new astra streams?

  • groups_category_for_new
    Category name to use for groups of new astra streams.

  • add_new_with_known_inputs
    Add new astra streams if streams contain M3U channel URL?

    Why does it exist?
    To prevent adding duplicate of existing channel under a different name.

  • make_new_enabled
    Make new streams enabled?

  • new_type
    New stream type, can be one of two types:
    spts - Single-Program Transport Stream. Streaming channels to the end users over IP network.
    mpts - Multi-Program Transport Stream. Preparing multiplexes to DVB modulators.

  • new_keep_active
    Delay before stop stream if no active connections for new streams.

  • disabled_prefix
    Disabled stream name prefix.
    Safe to set to ''.

    Why does it exist?
    To distinguish between streams manually disabled in dashboard and streams disabled by this program.

  • remove_without_inputs
    Remove streams without inputs?
    It has priority over disable_without_inputs.

  • disable_without_inputs
    Disable streams without inputs?

  • enable_on_input_update
    Enable streams if they got new inputs or inputs were updated (but not removed)?

  • rename
    Rename astra streams as M3U channels if their standartized names are equal?

    Why does it exist?
    To make astra streams named exactly as their counterparts in M3U playlist. For example, astra stream 'tv1000' could be renamed to 'TV 1000' if M3U contains the last one.

  • add_new_inputs
    Add new inputs to astra streams if such found in M3U channels?

    Why does it exist?
    To add new inputs to existing astra streams if M3U channel with matching name found but it's URL is not in stream inputs list.

  • unite_inputs
    Move inputs of astra streams with the same names to the first stream found?

    Why does it exist?
    To help in removal of duplicated streams. Works best with remove_without_inputs or disable_without_inputs.
    For example stream 'SPORTS (HD)' with input A and stream 'Sports HD' with input B will result in 'SPORTS (HD)' with inputs A and B, and 'Sports HD' with no inputs.

  • hash_check_on_add_new_inputs
    Add new inputs to astra streams even if M3U channel and stream input only differ by hash (everything after #)?

    Why does it exist?
    To prevent adding already exising URL's to inputs astra astreams.
    For example if it set to 'true', M3U channel URL 'http://channel' will be added to stream with input 'http://channel#no_sync', otherwise it won't.

  • sort_inputs
    Sort inputs of astra streams?

    Why does it exist?
    To structurize logs and produce astra config which is easier to navigate in.

  • input_weight_to_type_map
    Mapping of how high stream input should appear in the list after sorting.
    Any unspecified input will have weight of unknown_input_weight.

  • unknown_input_weight
    Default weight of unknown inputs.

  • input_blacklist
    List of regular expressions.
    If any expression match URL of a stream's input, this input will be removed from astra streams before adding new ones.

  • remove_duplicated_inputs
    Remove inputs of astra streams which already present in config?

  • remove_duplicated_inputs_by_rx_list
    List of regular expressions.
    If any first capture group (anything surrounded by the first ()) of regular expression match URL of input of a stream, any other inputs of that stream which first capture group is the same will be removed from stream.
    This setting is not controlled by remove_duplicated_inputs.

    Why does it exist?
    To be able to remove dulticated inputs per stream by specific conditions, for example by host name.

  • disable_all_but_one_input_by_rx_list
    List of regular expressions.
    If any expression match URL of a stream's input, only this input will be kept and all other will be disabled.
    If list has multiple entries, only input matching first found expression will be kept.

    Why does it exist?
    To give an option to leave only one input in stream, if specific inputs implies so.

    For example, input with #no_sync will periodically be unavailable, causing stream to switch to another input, causing unwanted interruptions.

  • remove_dead_inputs
    Remove inputs of astra streams which do not respond or give invalid response?
    Supports HTTP(S), enable use_analyzer option for more.
    It has priority over disable_dead_inputs.

  • disable_dead_inputs
    Disable inputs of astra streams which do not respond or give invalid response?
    Supports HTTP(S), enable use_analyzer option for more.

  • dead_inputs_check_blacklist
    List of regular expressions.
    If any expression match URL of a stream's input, this input will not be checked for availability.

  • input_max_conns
    Maximum amount of simultaneous connections to validate inputs of astra streams.
    Use more than 1 with caution. It may result in false positives if server consider frequent requests as spam.

  • input_resp_timeout
    Astra stream input response timeout.

  • use_analyzer
    Use astra analyzer (astra --analyze -p <port>) to check for dead inputs?
    Supports HTTP(S), UDP, RTP, RTSP.

    Why does it exist?
    To remove or disable dead inputs by advanced criteria such as bitrate or errors, check more protocols and use analyzer as a proxy if needed.

  • analyzer_addr
    Astra analyzer address in format of 'host:port'.

  • analyzer_watch_time
    Amount of time per attempt that astra analyzer should spend collecting results.

  • analyzer_max_attempts
    Maximum amount of attempts that astra analyzer should perform trying to get response from stream input.

    Why does it exist?
    On rare occasions, some streams may not respond after first request no matter how much time analyzer will spend trying to get info from it.

  • analyzer_bitrate_threshold
    Average bitrate threshold in kbit/s for stream inputs.
    If astra analyzer will return bitrate lower than specified threshold, input will be cosidered dead.

  • analyzer_video_only_bitrate_threshold
    Average bitrate threshold in kbit/s for stream inputs without audio.
    If astra analyzer will return bitrate lower than specified threshold, input will be cosidered dead.

  • analyzer_audio_only_bitrate_threshold
    Average bitrate threshold in kbit/s for stream inputs without video.
    If astra analyzer will return bitrate lower than specified threshold, input will be cosidered dead.

  • analyzer_cc_errors_threshold
    Average amount of CC errors for stream inputs.
    If astra analyzer will return amount of CC errors higher than specified threshold, input will be cosidered dead.
    Set to negative value to disable this check.

  • analyzer_pcr_errors_threshold
    Average amount of PCR errors for stream inputs.
    If astra analyzer will return amount of PCR errors higher than specified threshold, input will be cosidered dead.
    Set to negative value to disable this check.

  • analyzer_pes_errors_threshold
    Average amount of PES errors for stream inputs.
    If astra analyzer will return amount of PES errors higher than specified threshold, input will be cosidered dead.
    Set to negative value to disable this check.

  • input_update_map
    List of regular expression pairs.
    If any from expression match URL of astra stream's input, it will be replaced with URL from according M3U channel if it matches the to expression.
    Only first matching input will be updated per M3U channel.
    In most cases specified from and to should be identical.

    Why does it exist?
    To update (remove old, add new) inputs of astra streams if they were changed in M3U file, but preserve input's order, existing hashes (everything after #) and to produce readable report about which inputs were replaced.

    Why not to use input_blacklist to remove, add_new_inputs to add, *_to_input_hash_map to generate hashes and sort_inputs to sort them instead?
    Since old inputs will be removed beforehand, original hash will be lost and *_to_input_hash_map might not cover your usecase, the same with bulk sorting.
    Also update will be divided into 3 different parts, making it difficult to see actual changes.

  • update_inputs
    Update inputs of astra streams with M3U channels according to input_update_map?

  • keep_input_hash
    Keep old input hash on updating inputs of astra streams?

  • remove_inputs_by_update_map
    Remove inputs of astra streams which match at least one input_update_map.from expression but not in M3U channels?

    Why does it exist?
    To remove inputs of astra streams which are no longer valid (meant to be updated but not exist anymore).

  • name_to_input_hash_map
    Mapping of stream name regular expression to stream input hash which should be added.

    Why does it exist?
    To be able to add specific hashes per stream name, for example '#buffer_time=...' to HD streams.

  • group_to_input_hash_map
    Mapping of stream group regular expression to stream input hash which should be added.
    Stream groups should be defined to match expressions in the form of 'Category: Group'.

    Why does it exist?
    To be able to add specific hashes per stream group, for example '#no_sync' to radio streams.

  • input_to_input_hash_map
    Mapping of stream input regular expression to stream input hash which should be added.

    Why does it exist?
    To be able to add specific hashes per stream input, for example set User-Agent (#ua=...) to specific URL's.

  • name_to_keep_active_map
    Mapping of stream name regular expression to keep active setting of stream which should be set.
    Only first matching rule applies per stream in the priority: By inputs -> By name -> By group.

    Why does it exist?
    To be able to add keep active setting per stream name, for example 5 to frequently requested streams or 0 to disable it.

  • group_to_keep_active_map
    Mapping of stream group regular expression to keep active setting of stream which should be set.
    Only first matching rule applies per stream in the priority: By inputs -> By name -> By group.

    Why does it exist?
    To be able to add keep active setting per stream group, for example 5 to frequently requested streams or 0 to disable it.

  • input_to_keep_active_map
    Mapping of stream input regular expression to keep active setting of stream which should be set.
    Only first matching rule applies per stream in the priority: By inputs -> By name -> By group.
    Setting will be set if at least one input matches the by expression.

    Why does it exist?
    To be able to add keep active setting per stream input, for example 5 to frequently requested streams or 0 to disable it.

1. Install Golang 1.23 or newer.

2. Download the source code:

   git clone https://github.com/SCP002/m3u_merge_astra.git

3. Install dependencies:

   cd src
   go mod tidy

   Or

   cd src
   go get ./...

4. Update dependencies (optional):

   go get -u ./...

5. To build a binary for current OS / architecture into ../build/ folder:

   go build -o ../build/ m3u_merge_astra.go

   Or run /src/build.sh to build binaries for every OS / architecture pair.