This repository contains minimal packages to control the scout robot using ROS.

• scout_bringup: launch and configuration files to start ROS nodes
• scout_base: a ROS wrapper built around ugv_sdk developed by AgileX_Robotics (which is based on Weston_Robot) to monitor and control the scout robot
• scout_description: URDF model for the mobile base, a sample urdf is provided for customized robot with addtional sensors
• scout_msgs: scout related message definitions

1. Install dependent libraries

    sudo apt install -y libasio-dev
    sudo apt install -y ros-$ROS_DISTRO-teleop-twist-keyboard
   

2. Clone the packages into your catkin workspace and compile

   (the following instructions assume your catkin workspace is at: ~/scout_ws/src)

    mkdir -p ~/scout_ws/src
    cd ~/scout_ws/src
    git clone https://github.com/HKPolyU-UAV/scout_ros.git
    cd ..
    catkin_make
   

3. Setup CAN-To-USB adapter (for message exchange between machine and car)

• Enable gs_usb kernel module(If you have already added this module, you do not need to add it)

   sudo modprobe gs_usb
  

• Source the workspace

   source ~/scout_ws/devel/setup.bash
  

• first time use gh034-scout-ros package

   rosrun scout_bringup setup_can2usb.bash
  

• if not the first time use gh034-scout-ros package (Run this command every time you turn off the power)

   rosrun scout_bringup bringup_can2usb.bash
  

• Testing canbus command

  # receiving data from can0
   candump can0
  

4. Launch ROS nodes

• Start the base node for scout-mini

   roslaunch scout_bringup scout_robot_base.launch 
  

  The scout_bringup/scout_mini_robot_base.launch has 5 parameters:

  • port_name: specifies the port used to communicate with the robot, default = "can0"
  • simulated_robot: indicates if launching with a simulation, default = "false"
  • model_xacro: specifies the target ".xacro" file for the publishing of tf frames, default = scout_v2.xacro
  • odom_topic_name: sets the name of the topic which calculated odometry is published to, defaults = "odom"
  • is_scout_mini:Suitable for chassis of type scout_mini,defaults = "false"

• Start the keyboard tele-op node

   roslaunch scout_bringup scout_teleop_keyboard.launch
  

  SAFETY PRECAUSION:

  The default command values of the keyboard teleop node are high, make sure you decrease the speed commands before starting to control the robot with your keyboard! Have your remote controller ready to take over the control whenever necessary.

1. Install VRPN

    sudo apt install -y ros-$ROS_DISTRO-vrpn
    sudo apt install -y ros-$ROS_DISTRO-vrpn-client-ros
   

2. Launch the VRPN sample.launch node

    roslaunch vrpn_client_ros sample.launch
   

3. Check the position is correct from the VRPN node

    rostopic echo /vrpn_client_node/gh034_car/pose or ${your_topic}
   

4. Check the mission file

   The scout_base/src/utils/ugv_mission.hpp stores the mission waypoints of the FSM module.

5. Start the mission with scout_mini_vicon.launch

    roslaunch scout_base scout_mini_vicon.launch 
   

   The scout_base/scout_mini_vicon.launch has 4 parameters:

   • FSM_mission: determine using Finite state machine or not, default = "true"
   • External_pos_setpoint: retrieve position commands from "/scout_wp/pose" , default = "false"
   • MaxVelocity: Maximun forward velocity in meters per second, defult = "0.5"
   • MaxTurnrate: Maximun turning rate in radius per second, defult = "1"

to be continued...