�About |�APU2 |�Flash |�Tools |�Shop |�Support

apu6b4	System board
Status	active
Part numbers	apu6b4 = 1 i210IS SFP / 3 i211AT LAN / AMD GX-412TC CPU / 4 GB DRAM
Application	The SFP slot can be used for WAN connectivity, e.g. fiber optics.
Use with	case1d6u / case1d6blku enclosures ac12veur3 / ac12vus2 / ac12vuk AC adapter msata16g (and other sizes) mSATA SSD sd4b SD card wle200nx / wle600vx / wle900vx miniPCI express wireless modules spi1a flash recovery module
Specification	CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache. DRAM: 4 GB DDR3-1333 DRAM Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express. 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive Connectivity: 1 SFP port (Gigabit, Intel i210IS), 3 Gigabit Ethernet channels (Intel i211AT) I/O: microUSB serial port, 2 USB 3.0 external + 4 USB 2.0 internal, three front panel LEDs, pushbutton Expansion: 3 miniPCI express (J14: full miniPCI express, but no SIM, intended for wifi), J13 USB only, with SIM for modem, J16 USB or mSATA, optional SIM); GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD). Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e. Firmware: coreboot Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).
Documentation	TBD
Howto	HowTo collection
Cooling assembly	apu cooling assembly instructions
BIOS update	Please see Howto collection for instructions on BIOS upgrade.
Schematic	apu6b schematics
Manufacturer	PC Engines
Origin	Taiwan
� 2002-2022 PC Engines GmbH. All rights reserved .