�About |�APU2 |�Flash |�Tools |�Shop |�Support

wle900vx	802.11ac miniPCI express radio
Status	active
Part numbers	wle900vx = Compex WLE900VX 802.11ac / a/b/g/n miniPCI express radio card, 3 I-Pex connectors
Use with	All apu system boards pigsma pigtail (recommend two) antsma 2.4 GHz antenna or antsmadb dual band antenna (recommend two)
Data sheet	Compex WLE900VX
Chipset	Qualcomm Atheros QCA9880.
Connector	I-Pex / u.fl
Software support	Expect some pain, ath10k drivers required. Currently not supported by pfSense / OPNsense !
Note	Wireless radio cards are ESD sensitive, especially the RF switch and the power amplifier. To avoid damage by electrostatic discharge, the following installation procedure is recommended: Touch your hands and the bag containing the radio card to a ground point on the router board (for example one of the mounting holes). This will equalize the potential of radio card and router board. Install the radio card in the miniPCI express socket. Install the pigtail cable in the cutout of the enclosure. This will ground the pigtail to the enclosure. Touch the I-PEX connector of the pigtail to the mounting hole (discharge), then plug onto the radio card. Use external lightning protection for outdoor applications.
Compliance	FCC & CE. Intended for professional use.
Warranty	1 year.
Manufacturer	Compex
Origin	China
� 2002-2021 PC Engines GmbH. All rights reserved .