Description
Used by guitar makers for holding the edge-banding strips that surround the top and back of an instrument while the glue sets, this tape is convenient for a much wider range of tasks.
It is similar to conventional masking tape, but has slightly greater strength and stretchiness, and a natural rubber adhesive with better holding power. These properties make it a practical alternative when gluing small, delicate projects, or shapes that are tricky to clamp.
You can pull a joint tight, applying considerable tension before tacking the tape down; it holds the tension well, staying stuck tenaciously until you are ready to remove it. The tape peels off neatly without lifting finishes or leaving sticky residue behind.
Comes in a 19mm × 55m (3/4" × 180') roll.
Great stuff, made in Canada.
