Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI

Tiny Software Protocol for communication over UART, SPI, etc

A set of VHDL examples for DE0 Nano

23LC1024 are 1 Mbit Serial SRAM devices. The memory is accessed via a simple SPI compatible serial bus.

Implementation of a Serial Peripheral Interface(SPI) using Verilog and testing various modes of the SPI Device

Verification of spi protocol

spi driver for stm32 f4 family of microcontrollers . The library includes two flavor of apis which is blocking and non blocking ( interrupt based ) . library includes Apis to send and receive data .

A platform containing useful peripherals implemented in Chisel that can be attached together to complete the puzzle (SoC).

A very basic bus sniffer and communicator (UART, SPI, I2C)

C-libraries for SPI communication between two Arduino Nano.

🎮 PCB designed to interface with an PS2 Controller using SPI Protocol

This smart room project is designed to automate the control of devices in multiple rooms of a house. The project involves the use of two ATMEGA32 microcontrollers (Master and Slave) that communicate with each other to control different household appliances like lights, fans, air conditioning, a TV, and the home door.

Verilog implementations of different simple tasks

SPI is a synchronous, full duplex master-slave-based interface. The data from the master or the slave is synchronized on the rising or falling clock edge based on mode .Both master and slave can transmit data at the same time. The SPI interface got 4 wires.

SPI driver for AVR microcontroller

Simple program written in Assembly for software addressing, not hardware, to SPI protocol W25Q16JV flash memory

A digital design for the SPI protocol, delivered as a project for the logic design course

GPIO pins as a SPI interface to ADC module (MCP3202) to read analog voltage in channel 0 of MCP3202 and display analog voltage and percentage in LCD using 4 bit interface.

Arduino Driver for Microchip MCP23S17

Transferring data from SPI to UART using BMP280 sensor with Verilog