GEOS-Chem "Science Codebase" repository. Contains GEOS-Chem science routines, run directory generation scripts, and interface code. This repository is used as a submodule within the GCClassic and GCHP wrappers, as well as in other modeling contexts (external ESMs).

ESPHome configuration for a DIY indoor air quality monitor for CO₂ concentration, PM2.5 and PM10 concentrations, and temperature, humidity and pressure

Arduino library for PM sensors with serial interface

ESPHome configuration for M5Stack's PM2.5 Air Quality Kit with the PMSA003 particulate matter sensor and the SHT20 temperature and humidity sensor

Arduino library for Sensirion SPS30

Embedded i2c Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

Arduino library to work with Sensirion's SEN5x environmental sensor modules via I2C

Indoor use particulate matter sensor on USB or Bluetooth

C driver to work with Sensirion's SEN5x environmental sensor modules via I2C

Python-based driver for Sensirion SPS30 particulate matter sensor. Tested on Raspberry Pi Zero/Zero W/3B+/4B.

SPS30 PM Sensor I2C Driver for Python3

This repository contains the "superproject" wrapper for the "Classic" configuration of the GEOS-Chem model of atmospheric chemistry and composition.

Particulate Matter App - Be informed about the particulate matter situation and air quality!

Air-quality forecasting in Belgium using Deep Neural Networks, Neuroevolution and distributed Island T​ranspeciation

Generic embedded C driver to work with Sensirion's SEN5x environmental sensor modules via I2C

Particulate matter sensor using LoRaWAN as the transport mechanism

Arduino library for SDS011 dust sensor

Bridge software for receiving airborne particulate matter measurements from TheThingsNetwork and forwarding them to sensor.community and opensensemap

☁️ Check air quality near you quickly, using Airly API

BC ENV Air Quality Monitoring Data