This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
In accordance with this license, we have chosen to publish Pi VU Meter under GPL version 3.0.
Pi VU Meter is Derived from the SDL display version of the ameter ALSA level meter plugin.
Currently, you will need to compile the pivumeter lib from source.
You may use our automated setup to do so, specifying the output device the wish to use (see options below):
setup.sh blinkt
if you'd rather compile and set things up yourself, read on!
sudo apt-get install build-essential autoconf automake libtool libasound2-dev libfftw3-dev wiringpi
if you haven't done so already, git clone this repository and cd into it:
git clone https://github.com/pimoroni/pivumeter
cd pivumeter
from the top of the repository, run the following to generate the MakeFile:
aclocal && libtoolize
autoconf && automake --add-missing
then, to compile and install:
./configure && make
sudo make install
Pi VU Meter supports various options in your /etc/asound.conf, these include:
Specify which device to display the VU meter on.
Supported devices:
- blinkt - Simple amplitude meter through Green->Yellow->Red
- phat-beat - Simple stereo amplitude meter
- speaker-phat - Simple mono amplitude meter
- scroll-phat - displays 11-band FFT-based EQ
- scroll-phat-hd - displays 17-band FFT-based EQ
Specify the pixel brightness from 0 to 255
Mirror the bar direction.
pcm_scope.pivumeter {
type pivumeter
decay_ms 500
peak_ms 400
brightness 128
bar_reverse 0
output_device blinkt
}
a full example of a suitable asound.conf file can be found in the dependencies directory.