tunctl is an Erlang API for creating and using TUN/TAP interfaces.
For IPv4 addresses, beam needs to have privileges to configure interfaces.
To add cap_net_admin capabilities:
sudo setcap cap_net_admin=ep /path/to/bin/beam.smp
To check the privileges:
getcap /path/to/bin/beam.smp
To remove the privileges:
sudo setcap -r cap_net_admin=ep /path/to/bin/beam.smp
Currently, IPv6 addresses are configured by calling ifconfig using sudo (see below).
Requires the tun/tap driver from:
http://tuntaposx.sourceforge.net/
Allow the user running tunctl to call ifconfig using sudo:
sudo visudo
youruser ALL=NOPASSWD: /sbin/ifconfig tap*
youruser ALL=NOPASSWD: /sbin/ifconfig tun*
tunctl uses the FreeBSD tuntap legacy interface.
-
Ensure the tap device kernel module is loaded:
$ kldstat $ kldload if_tapIf you want the tap driver loaded on boot, add to /boot/loader.conf:
if_tap_load="YES" -
Check cloning is enabled:
$ sysctl net.link.tun.devfs_cloning net.link.tun.devfs_cloning: 1 $ sysctl net.link.tap.devfs_cloning net.link.tap.devfs_cloning: 1 -
Allow the user running tunctl to call ifconfig using sudo:
sudo visudo youruser ALL=NOPASSWD: /sbin/ifconfig tap* youruser ALL=NOPASSWD: /sbin/ifconfig tun*
Tuncer is a stand up guy and just like him, tuncer has your back.
create() -> {ok, PID}
create(Device) -> {ok, PID}
create(Device, Options) -> {ok, PID}
Types Device = [ string() | binary() ]
Options = [ Flag ]
Flag = [ tun | tap | no_pi | one_queue | multi_queue | vnet_hdr | tun_excl
| {active, false} | {active, true} | {namespace, NameSpace} ]
Device is the TUN/TAP interface name. If an interface name is not
specified, the TUN/TAP driver will choose one (for tap devices,
starting from "tap0"; for tun devices, beginning from "tun0").
When the device is in {active, true} mode, data is sent as
messages:
{tuntap, PID, binary()}
If an error is encountered:
{tuntap_error, PID, posix()}
Retrieving data from devices in {active, false} mode can be done
using recv/1,2 or read/1,2.
Options contains a list of flags.
tun: create a tun interface
tap: create a tap interface
no_pi: do not prepend the data with a 4 byte header describing
the physical interface
The options default to [tap, no_pi, {active, false}].
destroy(Ref) -> ok
Types Ref = pid()
Remove the TUN/TAP interface.
send(Ref, Data) -> ok | {error, posix()}
Types Ref = pid()
Data = binary()
Write data to the tun/tap device.
recv(Ref) -> {ok, Buf} | {error, posix()}
recv(Ref, Size) -> {ok, Buf} | {error, posix()}
Types Ref = pid()
Size = integer()
Buf = binary()
Read data from the tuntap interface.
If the device is in {active, true} mode, recv/1,2 will return
{error, einval}.
setopt(Ref, Option) -> ok | {error, posix()}
Types Ref = pid()
Option = {active, true} | {active, false}
Set an option. setopt/2 can be used for performing flow control
when active mode is enabled.
controlling_process(Ref, NewOwner) -> ok | {error, posix()}
Types Ref = NewOwner = pid()
Transfer ownership of the tuntap device to another process.
up(Ref, IP) -> ok | {error, posix()}
Types Ref = pid()
IP = IPv4 | IPv6
IPv4 = list() | tuple()
IPv6 = list() | tuple()
Configure a TUN/TAP interface using the default netmask and broadcast
for the network.
down(Ref) -> ok | {error, posix()}
Types Ref = pid()
Unconfigure a TUN/TAP interface.
dstaddr(Ref, IP) -> ok | {error, posix()}
Types Ref = pid()
IP = IPv4
IPv4 = list() | tuple()
Configure the remote address for a TUN/TAP interface in
point-to-point mode.
Currently only IPv4 addresses on Linux are supported.
broadcast(Ref, IP) -> ok | {error, posix()}
Types Ref = pid()
IP = IPv4
IPv4 = list() | tuple()
Configure the broadcast address for a TUN/TAP interface.
Currently only IPv4 addresses on Linux are supported.
persist(Ref, Boolean) -> ok | {error, posix()}
Types Ref = pid()
Boolean = [ true | false ]
(Linux only)
Set the interface to exist after the Erlang process exits.
owner(Ref, Owner) -> ok | {error, posix()}
Types Ref = pid()
Owner = integer()
(Linux only)
Set the uid owning the interface.
group(Ref, Group) -> ok | {error, posix()}
Types Ref = pid()
Group = integer()
(Linux only)
Set the gid owning the interface.
getfd(Ref) -> integer()
Types Ref = pid()
Get the file descriptor associated with the process. Use getfd/1
with read/1,2 and write/2 to interact directly with the tuntap device
(bypassing the gen_server).
read(Fd) -> {ok, Buf} | {error, posix()}
read(Fd, Size) -> {ok, Buf} | {error, posix()}
Types Fd = integer()
Size = integer()
Buf = binary()
Read data from the tuntap interface.
write(Fd, Buf) -> ok | {error, posix()}
Types Ref = integer()
Buf = binary()
Write _Buf_ to the interface.
devname(Ref) -> Devname
Types Devname = binary()
Returns the TUN/TAP device name.
flags(Ref) -> integer()
Returns an integer holding the interface creation flags.
tunctl does the actual tun/tap device manipulation. Some functions take a device name, others a file descriptor. It is up to the caller to make sure the file descriptors are closed (the device will disappear after the fd is closed if the device is not persistent).
create() -> {ok, FD, Device}
create(Ifname) -> {ok, FD, Device}
create(Ifname, Flags) -> {ok, FD, Device}
Types FD = integer()
Device = binary()
Flags = list()
persist(FD, Bool) -> ok | {error, posix()}
Types FD = integer()
Bool = true | false
owner(FD, UID) -> ok | {error, posix()}
Types FD = integer()
UID = integer()
group(FD, GID) -> ok | {error, posix()}
Types FD = integer()
UID = integer()
up(Device, IPv4Address) -> ok
Types Device = binary()
IPv4Address = tuple()
down(Device) -> ok
Types Device = binary()
-
"Passive" mode
1> {ok, Ref} = tuncer:create(). {ok,<0.34.0>} 2> tuncer:devname(Ref). <<"tap0">> 3> tuncer:up(Ref, "192.168.123.4"). ok 4> FD = tuncer:getfd(Ref). 9 5> {ok, Buf} = tuncer:read(FD, 1500). {ok,<<1,0,94,0,0,22,190,138,20,22,76,120,8,0,70,192,0,40, 0,0,64,0,1,2,200,76,192,...>>} 6> tuncer:destroy(Ref). ok -
Active mode
1> {ok, Ref} = tuncer:create(<<>>, [tap, no_pi, {active, true}]). {ok,<0.34.0>} 2> tuncer:devname(Ref). <<"tap0">> 3> tuncer:up(Ref, "192.168.123.4"). ok 4> flush(). Shell got {tuntap,<0.47.0>, <<51,51,0,0,0,22,250,6,27,10,131,177,134,221,96,0,0,0,0,36, 0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,2,0,0,0,0,0,0,0,0, 0,0,0,0,0,22,58,0,5,2,0,0,1,0,143,0,235,206,0,0,0,1,4,0,0, 0,255,2,0,0,0,0,0,0,0,0,0,1,255,10,131,177>>} Shell got {tuntap,<0.47.0>, <<51,51,255,10,131,177,250,6,27,10,131,177,134,221,96,0,0,0, 0,24,58,255,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,2,0,0,0,0, 0,0,0,0,0,1,255,10,131,177,135,0,98,169,0,0,0,0,254,128,0, 0,0,0,0,0,248,6,27,255,254,10,131,177>>} 5> tuncer:destroy(Ref). ok
vpwn will set up a point to point tunnel over the Erlang distribution protocol.
Compile vpwn on the source and destination nodes:
erlc -I deps -o ebin examples/*.erl
Run Erlang on the destination node:
erl -pa deps/*/ebin ebin -setcookie OMNOMNOM -name node
And on the source node:
erl -pa deps/*/ebin ebin -setcookie OMNOMNOM -name node
Then start up the tunnel (replace the host name):
vpwn:start('[email protected]', "10.10.10.1", "10.10.10.2").
Then connect over the tunnel to the second node:
ping 10.10.10.2
ssh 10.10.10.2
br is an example of a simple bridge that floods frames to all the switch
ports. br uses a tap device plugged into a Linux bridge as an
uplink port and 1 or more tap devices as the switch ports.
This example uses the tap devices as interfaces for Linux containers (LXC).
- Create a bridge and attach the physical ethernet interface
# /etc/network/interfaces
iface br0 inet dhcp
bridge_ports eth0
bridge_stp off
bridge_fd 0
bridge_maxwait 0
-
Start the bridge:
erlbr0is the name of the tap device connected to the bridgeerl0, erl1, erl2are the tap devices used by the containers
br:start(["erlbr0", "erl0", "erl1", "erl2"]).
- In another shell, as root, bring up the uplink and attach it to the bridge:
# ifconfig erlbr0 up
# brctl addif br0 erlbr0
# brctl show br0
bridge name bridge id STP enabled interfaces
br0 8000.4aec6d3a44d1 no erlbr0
- Move the switch port interface into the container. The interface name inside the container will be known as "erl0".
lxc.network.type=phys
lxc.network.link=erl0
lxc.network.flags=up
-
Linux:
-
the TUNSETIFF ioctl request to create the interface requires CAP_NET_ADMIN privileges. Look at moving the interface creation into the procket setuid binary for OSes that use the multiplexing dev.
-
add support for tun filtering
-
-
make sure tuncer can never leak file descriptors