Opensource development package for Allwinner F1C100s & F1C200s

Check this file to view current driver support progress for F1C100s/F1C200s: PROGRESS-SUNIV.md

Check this file to view current driver support progress for V3/V3s/S3/S3L: PROGRESS-V3.md

sudo apt install rsync wget unzip build-essential git bc swig libncurses-dev libpython3-dev libssl-dev
sudo apt install python3-distutils

Notice: Root permission is not necessery for download or extract.

git clone https://github.com/mangopi-sbc/buildroot-mangopi-r

Notice: Root permission is not necessery for build firmware.

Caution: Apply defconfig will reset all buildroot configurations to default values.

Generally, you only need to apply it once.

cd buildroot-mangopi-r
make widora_mangopi_r3_defconfig

make

./rebuild-kernel.sh

./rebuild-uboot.sh

Buildroot will download sourcecode when compiling the firmware. You can grab a TRUSTWORTHY archive of 'dl' folder for speed up. https://pan.baidu.com/s/1-5CiMwXMQWjZxsFhsyRC5Q?pwd=1111

.make source

If you have a multicore CPU, you can try

make -j8

or buy a powerful PC for yourself.

You can flash a board by Linux (Recommended) or Windows system.

• rebuild-uboot.sh: Recompile U-Boot when you direct edit U-Boot sourcecode.
• rebuild-kernel.sh: Recompile Kernel when you direct edit Kernel sourcecode.
• emulate-chroot.sh: Emulate target rootfs by chroot.