This project contains a functional module with a wizard component and some supportive components and directives for Angular version 9 or later.

Run npm run build to build the project. The build artifacts will be stored in the dist/ directory.

Run npm test to execute the unit tests via Karma.

Latest angular-archwizard is compatible with Angular 9+. Older versions of angular-archwizard can be used together with older versions of Angular. The following table shows which version of angular-archwizard has been built with which Angular version:

angular-archwizard can be developed with Gitpod, a free one-click online IDE for GitHub:

angular-archwizard is available as a NPM package. To install angular-archwizard in your project directory run:

$ npm install --save angular-archwizard

After installation you can import angular-archwizard into your Angular project by adding the ArchwizardModule to your module declaration as follows:

import { ArchwizardModule } from 'angular-archwizard';

@NgModule({
  imports: [
    ArchwizardModule
  ],
})
export class Module { }

To allow customization, angular-archwizard bundles CSS styles separately. If you are using Angular CLI, import them into your styles.css...

@import '../node_modules/angular-archwizard/styles/archwizard.css';

...or include them into angular.json:

{
  // ...
  "styles": [
    "node_modules/angular-archwizard/styles/archwizard.css",
    "src/styles.css"
  ]
  // ...
}

If you are using SCSS, you can include the styles in the form of a .scss file: node_modules/angular-archwizard/styles/archwizard.scss. This way you can easily customize wizard's appearance by tweaking SCSS variables as described in Styles Customization.

To use this wizard component in an angular project simply add a aw-wizard component to the html template of your component:

<aw-wizard>
  <aw-wizard-step stepTitle="Title of step 1">
    Content of Step 1
    <button type="button" awNextStep>Next Step</button>
    <button type="button" [awGoToStep]="{stepIndex: 2}">Go directly to third Step</button>
  </aw-wizard-step>
  <aw-wizard-step stepTitle="Title of step 2" awOptionalStep>
    Content of Step 2
    <button type="button" awPreviousStep>Go to previous step</button>
    <button type="button" awNextStep>Go to next step</button>
  </aw-wizard-step>
  <aw-wizard-step stepTitle="Title of step 3">
    Content of Step 3
    <button type="button" awPreviousStep>Previous Step</button>
    <button type="button" (click)="finishFunction()">Finish</button>
  </aw-wizard-step>
</aw-wizard>

The <aw-wizard> environment is the environment in which you define the steps belonging to your wizard. In addition to the contained wizard steps, angular-archwizard enables you to define the location and the layout of the navigation bar inside your wizard. To set the location, the layout of the navigation bar and many other settings, you can pass the following parameters to the aw-wizard component:

The location of the navigation bar, contained inside the wizard, can be specified through the navBarLocation input value. This value can be either top, bottom, left or right, where the values specify the position at which the navigation bar will be shown. In addition top and bottom will lead to a horizontal navigation bar, when left and right lead to a vertical navigation bar at the left or right side. If no navBarLocation is given the navigation bar will be shown at the top of the wizard.

Another option that can be changed is the design or layout of the navigation bar. Currently five different navigation bar layouts exist. These are small, large-filled, large-empty, large-filled-symbols and large-empty-symbols.

The first three layouts are showing circles with or without a background, for each step of your wizard, in the navigation bar. The second two layouts large-filled-symbols and large-empty-symbols optionally add a symbol in the center of the circle, for each step of your wizard, in the navigation bar, if such a symbol has been defined for the step.

Normally the steps in the navigation bar are layed out from left to right or from top to bottom. In some cases, like with languages that are written from right to left, it may be required to change this direction to layout the steps from right to left. To layout the steps from right to left you can pass right-to-left to the navBarDirection input of the wizard component.

Per default the wizard always starts with the first wizard step, after initialisation. The same applies for a reset, where the wizard normally resets to the first step. Sometimes this needs to be changed. If another default wizard step needs to be used, you can set it, by using the [defaultStepIndex] input of the wizard component. For example, to start the wizard in the second step, [defaultStepIndex]="2" needs to be set.

Please be aware, that angular will interpret the given input value as a string if it's not enclosed by []!

Sometimes it may be necessary to disable navigation via the navigation bar. In such a case you can disable navigation via the navigation bar by setting the input [disableNavigationBar] of the wizard component to true.

After disabling the navigation bar, the user can't use the navigation bar anymore to navigate between steps. Disabling the navigation bar doesn't restrict the use of elements (buttons or links) with an awNextStep, awPreviousStep or awGoToStep directive.

Possible <aw-wizard> parameters:

angular-archwizard contains two ways to define a wizard step. One of these two ways is by using the <aw-wizard-step> component.

A wizard step can have its own unique id. This id can then be used to navigate to the step. In addition the [stepId] of a wizard step is used as the id of the li element for the wizard step in the navigation bar.

A wizard step needs to contain a title, which is shown in the navigation bar of the wizard. To set the title of a step, add the stepTitle input attribute, with the choosen step title, to the definition of your wizard step.

Sometimes it's useful to add a symbol in the center of the circle in the navigation bar, which belongs to the step. angular-archwizard supports this through the [navigationSymbol] input attribute of the wizard step.

Be aware, that not all layouts display the symbols. Only the layouts large-filled-symbols and large-empty-symbols display the symbols!

If you want to add a 2 to the circle in the navigation bar belonging to the second step, you can do it like this:

<aw-wizard-step stepTitle="Second Step" [navigationSymbol]="{ symbol: '2' }">
  ...
</aw-wizard-step>

In addition to normal symbols it's also possible to use an icon from a font as a symbol. To use an icon from a font you need to first search for the unicode belonging to the icon you want to insert. Afterwards you can use the unicode in the numeric character reference format as the symbol for the step. In addition you need to specify the font family, to which the icon belongs, otherwise the symbol can't be displayed correctly.

The font family of the used symbol can be specified via the fontFamily field of the given [navigationSymbol] json input object. For example, if you want to show the icon with the unicode \f2dd of FontAwesome inside a step circle in the navigation bar, then you can do this via the following [navigationSymbol] input attribute:

<aw-wizard-step stepTitle="Second Step" [navigationSymbol]="{ symbol: '&#xf2dd;', fontFamily: 'FontAwesome' }">
  ...
</aw-wizard-step>

Sometimes it's required to only allow the user to enter a specific step if a certain validation method returns true. In such a case you can use the [canEnter] input of the targeted wizard step. This input can be either a boolean, which directly tells the wizard if the targeted step can be entered, or a lambda function, taking a MovingDirection and returning a boolean or a Promise<boolean>. This function will then be called, with the direction in which the targeted step will be entered, whenever an operation has been performed, that leads to a change of the current step. It then returns true, when the step change should succeed and false otherwise.

If you have an additional check or validation you need to perform to decide, if the step can be exited (both to the next step and to the previous step), you can either pass a boolean or a function, taking a MovingDirection enum and returning a boolean or a Promise<boolean>, to the [canExit] attribute of the wizard step. This boolean, or function, is taken into account, when an operation has been performed, which leads to a transition of the current step. If [canExit] has been bound to a boolean, it needs to be true to leave the step in either direction (foreward AND backward). If only exiting in one direction should be covered, you can pass a function, taking a MovingDirection and returning a boolean, to [canExit]. This function will then be called whenever an operation has been performed, that leads to a change of the current step.

If you need to call a function to do some initialisation work before entering a wizard step you can add a stepEnter attribute to the wizard step environment like this:

<aw-wizard-step stepTitle="Second Step" (stepEnter)="enterSecondStep($event)">
  ...
</aw-wizard-step>

This leads to the calling of the enterSecondStep function when the wizard moves to this step. When the first step of the wizard contains a stepEnter function, it not only gets called when the user moves back from a later step to the first step, but also after the wizard is initialized. The event emitter will call the given function with a parameter that contains the MovingDirection of the user. If the user went backwards, for example from the third step to the second or first step, then MovingDirection.Backwards will be passed to the function. If the user went forwards MovingDirection.Forwards will be passed to the function.

Similar to stepEnter you can add a stepExit attribute to the wizard step environment, if you want to call a function every time a wizard step is exited either by pressing on a component with an awNextStep or awPreviousStep directive, or by a click on the navigation bar. stepExit, like stepEnter can call the given function with an argument of type MovingDirection that signalises in which direction the step was exited.

Possible <aw-wizard-step> parameters:

In addition to the "normal" step component <aw-wizard-step> it's also possible to define an optional <aw-wizard-completion-step>. The aw-wizard-completion-step is meant as the final wizard step, which signalises the user, that he or she successfully completed the wizard. When an aw-wizard-completion-step has been entered by the user, all wizard steps, including the optional steps belonging to the wizard, are marked as completed. In addition the user is prevented from leaving the aw-wizard-completion-step to another step, once it has been entered.

The given parameters for the wizard completion step are identical to the normal wizard step. The only difference is, that it isn't possible to pass a (stepExit) and [canExit] parameter to the aw-wizard-completion-step, because it can't be exited.

Possible <aw-wizard-completion-step> parameters:

By default angular-archwizard operates in a "strict" navigation mode. It requires users to navigate through the wizard steps in a linear fashion, where they can only enter the next step if all previous steps have been completed and the exit condition of the current step have been fulfilled. The only exception to this rule are optional steps, which a user can skip. Using the navigation bar, the user can navigate back to steps they already visited.

You can alter this behavior by applying to the <aw-wizard> element an additional [awNavigationMode] directive, which can be used in two ways. The easiest option is to tweak the default navigation mode with [navigateBackward] and/or [navigateForward] inputs which control the navigation bar and have the following options:

Take notice that the 'allow' and 'visited' options still respect step exit conditions. Also, the completion step still only becomes enterable after all previous steps are completed. Example usage:

<aw-wizard [awNavigationMode] navigateBackward="allow" navigateForward="allow">
  ...
</aw-wizard>

If changes you need are more radical, you can define your own navigation mode. In order to do this, create a class implementing the NavigationMode interface and pass an instance of this class into the [awNavigationMode] directive. This takes priority over [navigateBackward] and [navigateForward] inputs. Example usage:

custom-navigation-mode.ts:

import { NavigationMode } from 'angular-archwizard'

class CustomNavigationMode implements NavigationMode {

  // ...
}

my.component.ts:

@Component({
  // ...
})
class MyComponent {

  navigationMode = new CustomNavigationMode();
}

my.component.html:

<aw-wizard [awNavigationMode]="navigationMode">
  ...
</aw-wizard>

Instead of implementing the NavigationMode interface from scratch, you can extend one of the classes provided by angular-archwizard:

• BaseNavigationMode: This class contains an abstract method called isNavigable, which you will have to override to define wizard's behavior towards navigation using the navigation bar.

• ConfigurableNavigationMode: This class defines the default navigation mode used by angular-archwizard. In some cases, it might be more convenient to base your custom implementation on it.

This way of customizing the wizard is advanced, so be prepared to refer to documentation comments and source code for help.

Possible awNavigationMode parameters:

In some cases it may be required that the user is allowed to leave an entered aw-wizard-completion-step. In such a case you can enable this by adding the directive [awEnableBackLinks] to the aw-wizard-completion-step.

<aw-wizard-completion-step awEnableBackLinks>
  Final wizard step
</aw-wizard-completion-step>

Possible awEnableBackLinks parameters:

Sometimes it's not enough to define a title with the stepTitle attribute in <aw-wizard-step> and <aw-wizard-completion-step>. One example for such a case is, if the title should be written in another font. Another example would be if it's desired that the title should be chosen depending on the available width of your screen or window. In such cases you may want to specify the html for the title of a wizard step yourself. This can be achieved by using the [awWizardStepTitle] directive inside a wizard step on a ng-template component.

<aw-wizard-step (stepEnter)="enterStep($event)">
  <ng-template awWizardStepTitle>
    <span class="hidden-sm-down">Delivery address</span>
    <span class="hidden-md-up">Address</span>
  </ng-template>
</aw-wizard-step>

Additionally it is possible to inject the corresponding WizardStep object into the ng-template environment. This for example allows customization of the step title depending on the state of the wizard step, like on the completion and selection state:

<aw-wizard-step (stepEnter)="enterStep($event)">
  <ng-template awWizardStepTitle let-wizardStep="wizardStep">
    {{ wizardStep.completed ? "Delivery address (✔)" : "Delivery address" }}
  </ng-template>
</aw-wizard-step>

In addition to the step title, the navigation symbol/step symbol can also be set via a directive. This is required, if the navigation step symbol is not a simple character or a symbol, but something more complex, like a html component. In such a case, the the navigation symbol can be specified using the [awWizardStepSymbol] directive, inside a wizard step on a ng-template component.

<aw-wizard-step (stepEnter)="enterStep($event)">
  <ng-template awWizardStepSymbol>
    <!-- use <i class="fa fa-file"></i> for fontawesome version 4 -->
    <i class="far fa-file"></i>
  </ng-template>
</aw-wizard-step>

Additionally it is possible to inject the corresponding WizardStep object into the ng-template environment. This for example allows customization of the navigation symbol depending on the state of the wizard step, like on the completion and selection state:

<aw-wizard-step (stepEnter)="enterStep($event)">
  <ng-template awWizardStepSymbol let-wizardStep="wizardStep">
    <!-- use <i *ngIf="!wizardStep.completed" class="fa fa-file"></i> for fontawesome version 4 -->
    <i *ngIf="!wizardStep.completed" class="far fa-file"></i>
    <!-- use <i *ngIf="wizardStep.completed" class="fa fa-check"></i> for fontawesome version 4 -->
    <i *ngIf="wizardStep.completed" class="far fa-check"></i>
  </ng-template>
</aw-wizard-step>

If you need to define an optional step, that doesn't need to be done to continue to the next steps, you can define an optional step by adding the awOptionalStep directive to the step you want to declare as optional:

<aw-wizard-step awOptionalStep>
  ...
</aw-wizard-step>

Sometimes a wizard step should only be marked as optional if some condition has been fulfilled. In such a case you can pass the condition to the awOptionalStep input parameter of the awOptionalStep directive to tell the wizard whether the step should be marked as optional:

<aw-wizard-step [awOptionalStep]="condition">
  ...
</aw-wizard-step>

It is important to note that the condition input value can not be changed after initialization.

In some cases it is required to specify a step as completed by default. This means that the step should be shown as completed directly after initialization. A step can be marked as completed by default by adding the awCompletedStep directive to the step you want to declare as completed:

<aw-wizard-step awCompletedStep>
  ...
</aw-wizard-step>

Sometimes a wizard step should only be marked as completed if some condition has been fulfilled. In such cases you can pass the condition to the awCompletedStep input parameter of the awCompletedStep directive to tell the wizard, whether the step should be marked as complete:

<aw-wizard-step [awCompletedStep]="condition">
  ...
</aw-wizard-step>

It is important to note that the condition input value can not be changed after initialization.

In some cases it may be a better choice to set the default wizard step not via a static number. Another way to set the default wizard step is by using the awSelectedStep directive. When attaching the awSelectedStep directive to an arbitrary wizard step, it will be marked as the default wizard step, which is shown directly after the wizard startup.

angular-archwizard has three directives, which allow moving between steps. These directives are the awPreviousStep, asNextStep and awGoToStep directives.

The awGoToStep directive needs to receive an input, which tells the wizard, to which step it should navigate, when the element with the awGoToStep directive has been clicked.

This input accepts different arguments:

• a destination step index: One possible argument for the input is a destination step index. A destination step index is always zero-based, i.e. the index of the first step inside the wizard is always zero.

  To pass a destination step index to an awGoToStep directive, you need to pass the following json object to the directive:

  <button [awGoToStep]="{ stepIndex: 2 }" (finalize)="finalizeStep()">Go directly to the third Step</button>

• a destination step id: Another possible argument for the input is a the unique step id of the destination step. This step id can be set for all wizard steps through their input [stepId].

  To pass a unique destination step id to an awGoToStep directive, you need to pass the following json object to the directive:

  <button [awGoToStep]="{ stepId: 'unique id of the third step' }" (finalize)="finalizeStep()">Go directly to the third Step</button>

• a step offset between the current step and the destination step: Alternatively to an absolute step index or an unique step id, it's also possible to set the destination wizard step as an offset to the source step:

  <button [awGoToStep]="{ stepOffset: 1 }" (finalize)="finalizeStep()">Go to the third Step</button>

In all above examples a click on the "Go to the third Step" button will move the user to the next step (the third step) compared to the step the button belongs to (the second step). If the button is part of the second step, a click on it will move the user to the third step.

In all above cases it's important to use [] around the awGoToStep directive to tell angular that the argument is to be interpreted as javascript.

In addition to a static value you can also pass a local variable from your component typescript class, that contains to which step a click on the element should change the current step of the wizard. This can be useful if your step transitions depend on some application dependent logic, that changes depending on the user input. Here again it's important to use [] around the awGoToStep directive to tell angular that the argument is to be interpreted as javascript.

Sometimes it's required to bind an event emitter to a specific element, which can perform a step transition. Such an event emitter can be bound to the (preFinalize) output of the element, which contains the awGoToStep directive. This event emitter is then called, directly before the wizard transitions to the given step.

Alternatively you can also bind an event emitter to (postFinalize), which is executed directly after the wizard transitions to the given step.

In case you don't really care when the finalization event emitter is called, you can also bind it simply to (finalize). finalize is a synonym for preFinalize.

Possible parameters:

By adding a awNextStep directive to a button or a link inside a step, you automatically add a onClick listener to the button or link, that leads to the next step. This listener will automatically change the currently selected wizard step to the next wizard step after a click on the component.

<button (finalize)="finalizeStep()" awNextStep>Next Step</button>

Like the awGoToStep directive the awNextStep directive provides a preFinalize, postFinalize and finalize output, which are called every time the current step is successfully exited, by clicking on the element containing the nextStep directive.

In the given code snipped above, a click on the button with the text Next Step leads to a call of the finalize function every time the button has been pressed.

Possible parameters:

By adding a awPreviousStep directive to a button or a link, you automatically add a onClick listener to the button or link, that changes your wizard to the previous step. This listener will automatically change the currently selected wizard step to the previous wizard step after a click on the component.

<button (finalize)="finalizeStep()" awPreviousStep>Previous Step</button>

Like both the awGoToStep and awNextStep directives the awPreviousStep directives provides a preFinalize, postFinalize and finalize output, which are called every time the current step is successfully exited, by clicking on the element containing the awPreviousStep directive.

Possible parameters:

In some cases it may be a good idea to move a wizard step to a custom component. This can be done by defining adding the awWizardStep directive to the component that contains the wizard step.

<aw-wizard>
  <aw-wizard-step stepTitle="Steptitle 1">
    Step 1
  </aw-wizard-step>
  <custom-step awWizardStep stepTitle="Steptitle 2">
    ...
  </custom-step>
  <aw-wizard-step stepTitle="Steptitle 3">
    Step 3
  </aw-wizard-step>
</aw-wizard>

Possible awWizardStep parameters:

In addition to the possibility of defining a normal wizard step in a custom component, it is also possible to define a wizard completion step in a custom component. To define a wizard completion step in a custom component you need to add the [awWizardCompletionStep] directive to the custom component that contains the wizard completion step.

<aw-wizard>
  <aw-wizard-step stepTitle="Steptitle 1">
    Step 1
  </aw-wizard-step>
  <custom-step awWizardCompletionStep stepTitle="Completion steptitle">
    ...
  </custom-step>
</aw-wizard>

Possible awWizardCompletionStep parameters:

Sometimes it's also required to reset the wizard to its initial state. In such a case you can use the awResetWizard directive. This directive can be added to a button or a link for example. When clicking on this element, the wizard will automatically reset to its defaultStepIndex.

In addition it's possible to define an EventEmitter, that is called when the wizard is being reset. This EventEmitter can be bound to the (finalize) input of the awResetWizard directive.

Possible awResetWizard parameters:

Sometimes it's required to access the wizard component directly. In such a case you can get the instance of the used wizard component in your own component via:

@ViewChild(WizardComponent)
public wizard: WizardComponent;

In addition to letting the user navigate the wizard with awNextStep, awPreviousStep and awGoToStep directives, you can trigger navigation programmatically. Use navigation methods exposed by the WizardComponent class:

wizard.goToNextStep();
wizard.goToPreviousStep();
wizard.goToStep(desinationIndex);

Sometimes you like to use your own custom CSS for some parts of the wizard like its navigation bar. This is quite easy to do. Different ways are possible:

1. Either use a wrapper around the wizard:

   <div class="my-custom-css-wrapper">
     <aw-wizard>
       ...
     </aw-wizard>
   </div>

2. Or add your css wrapper class directly to the wizard element:

   <aw-wizard class="my-custom-css-wrapper">
     ...
   </aw-wizard>

When overriding css properties already defined in the existing navigation bar layouts, it is required to use !important. In addition it is required to add encapsulation: ViewEncapsulation.None to the component, that defines the wizard and overrides its layout. For additional information about how to write your own navigation bar please take a look at the existing navigation bar layouts, which can be found in the archwizard.scss file.

In some cases it may be required to remove or insert one or multiple steps after the wizard initialization. For example after a user does some interaction with the wizard, it may be required to add or remove a later step. In such situations the wizard supports the removal and insertion of steps in the DOM.

If an earlier step, compared to the current step, has been removed or inserted, the wizard will adjust the current step to ensure that the changed state is valid again.

When removing a step be sure to not remove the step the wizard is currently displaying, because otherwise the wizard will be inside an invalid state, which may lead to strange and unexpected behavior.

If you are using SCSS, you can customize the wizard's global styles and color theme using SCSS variables:

1. Import node_modules/angular-archwizard/styles/archwizard.scss into your styles.scss file as described in the Installation section.

2. Re-define any of the variables you can find at the top of node_modules/angular-archwizard/styles/variables.scss.

In the following example, we configure a simple color theme which only defines styles for two step states: 'default' and 'current'.

// styles.scss

$aw-colors: (
  '_': (
    'default': (
      'border-color-default': #76b900,
      'background-color-default': null,
      'symbol-color-default': #68aa20,
      'border-color-hover': #569700,
      'background-color-hover': null,
      'symbol-color-hover': #569700,
    ),
    'current': (
      'border-color-default': #bbdc80,
      'background-color-default': #bbdc80,
      'symbol-color-default': #808080,
      'border-color-hover': #76b900,
      'background-color-hover': #76b900,
      'symbol-color-hover': #808080,
    )
  )
);

@import '../node_modules/angular-archwizard/styles/archwizard.scss';

Please don't hesitate to look inside node_modules/angular-archwizard/styles/variables.scss for documentation on the $aw-colors variable and other variables you can tweak to tune the wizard to your needs.

You can find an basic example project using angular-archwizard here. The sources for the example can be found in the angular-archwizard-demo repository. It illustrates how the wizard looks like and how the different settings can change its layout and behavior.