History (OE2DOR) 05/11/2018
- Board Layout changed to fit neatly inside FT-991A
- Connection to IF using existing U.FL jumper cable
- Connection to FT991A SCP-UNIT using additional short U.FL jumper cable
- Connection to SDR/SpectrumAnalyser using new U.FL to SMA cable
- Mounting using M3/10mm PCB Spacer soldered to head of existing PCB mounting screw (since PCB mounting screw has no metric thread)
- Fixation using M3 Plastic nut & screw sticking into tuning hole of shielding box
- All but one resitor (1206) changed to 0805 to allow for smaller PCB layout
History (G4HUP/W3AXL) Updated G4HUP / W3AXL panadapter tap Simple revision to the G4HUP high-impedance IF tap with specific components and updated filters.
12/14/2017
- Revised parts.md to add quantity of parts needed.
12/10/2017
- Up and running on a Yaesu FT-991A
12/10/2017
- Revised component values to values that you can actually obtain. Added digikey parts list.
10/22/2017
- Second revision testing complete and satisfactory. Up and running on a Yaesu FT-450D
08/30/2017
- Schematic revised to fix capacitor placement error in original schematic. New boards sent out for fabrication and testing will be done when they get back.