Jump to content

Hydroxylammonium sulfate

From Wikipedia, the free encyclopedia
Hydroxylammonium sulfate
Names
Other names
Hydroxylamine sulfate
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.030.095 Edit this at Wikidata
EC Number
  • 233-118-8
RTECS number
  • NC5425000
UNII
UN number 2865
  • InChI=1S/2H4NO.H2O4S/c2*1-2;1-5(2,3)4/h2*2H,1H3;(H2,1,2,3,4)/q2*+1;/p-2 checkY
    Key: VGYYSIDKAKXZEE-UHFFFAOYSA-L checkY
  • InChI=1/2H4NO.H2O4S/c2*1-2;1-5(2,3)4/h2*2H,1H3;(H2,1,2,3,4)/q2*+1;/p-2
    Key: VGYYSIDKAKXZEE-NUQVWONBAN
  • [O-]S([O-])(=O)=O.O[NH3+].O[NH3+]
Properties
H8N2O6S
Molar mass 164.14 g/mol
Appearance white crystalline to fine product, slightly hygroscopic
Density 1.88 g/cm3
Melting point 120 °C (248 °F; 393 K) decomposes
58.7 g/100 ml (20 °C)
Structure[1]
Monoclinic
P21/c
a = 7.932±0.002 Å, b = 7.321±0.002 Å, c = 10.403±0.003 Å
α = 90°, β = 106.93±0.03°, γ = 90°
4
Hazards
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation markGHS08: Health hazardGHS09: Environmental hazard
Warning
H290, H302, H312, H315, H317, H319, H351, H373, H400, H412
P201, P202, P234, P260, P261, P264, P270, P272, P273, P280, P281, P301+P312, P302+P352, P305+P351+P338, P308+P313, P312, P314, P321, P322, P330, P332+P313, P333+P313, P337+P313, P362, P363, P390, P391, P404, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
1
2
Safety data sheet (SDS) External MSDS
Related compounds
Other anions
Hydroxylammonium nitrate
Hydroxylammonium chloride
Other cations
Ammonium sulfate
Hydrazinium sulfate
Related compounds
Hydroxylamine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Hydroxylammonium sulfate is the inorganic compound with the formula [NH3OH]2SO4. A colorless solid, it is the sulfate salt of hydroxylamine. It is primarily used as an easily handled form of hydroxylamine, which is a volatile liquid.[2]

Production

[edit]

Hydroxylammonium sulfate is prepared industrially by protonation of hydroxylamine. The latter is produced by the hydrogenation of nitric oxide using a platinum catalyst:[2]

2 NO + 3 H2 + H2SO4 → [NH3OH]2[SO4]

Another route to NH2OH is the Raschig process: aqueous ammonium nitrite is reduced by HSO3 and SO2 at 0 °C to yield a hydroxylamido-N,N-disulfonate anion::[3]

[NH4]+[NO2] + 2 SO2 + NH3 + H2O → [NH4]2[HON(SO3)2]

This ammonium hydroxylamine disulfonate anion is then hydrolyzed to give hydroxylammonium sulfate:

[NH4]2[HON(SO3)2] + 2 H2O → [HONH3]2SO4

Applications

[edit]

Almost all hydroxylamine and its salts are used to make precursors to nylons via cyclohexanone oxime.[2] Many aldehydes and ketones undergo the same conversion to oximes. carboxylic acids and their derivatives (e.g. esters) convert to hydroxamic acids. Isocyanates to N-hydroxyureas. Nitriles react to give amidoximes. Hydroxylammonium sulfate is also used to generate hydroxylamine-O-sulfonic acid from oleum or from chlorosulfuric acid.

Hydroxylammonium sulfate is used in the production of anti-skinning agents, pharmaceuticals, rubber, textiles, plastics and detergents. It is a radical scavenger that terminates radical polymerization reactions and serves as an antioxidant in natural rubber. (NH3OH)2SO4 is a starting material for some insecticides, herbicides and growth regulators. It is used in photography as a stabiliser for colour developers and as an additive in photographic emulsions in colour film.

Structure

[edit]

Hydroxylammonium sulfate exists as tetrahedral NH3OH+ cations and sulfate anions.

Safety

[edit]

Hydroxylamine, which occurs widely in nature, has low toxicity. The compound is stable below 120 °C.[2]

References

[edit]
  1. ^ Mirceva, A.; Golic, L. (15 May 1995). "Hydroxylammonium Sulfate". Acta Crystallographica Section C Crystal Structure Communications. 51 (5): 798–800. Bibcode:1995AcCrC..51..798M. doi:10.1107/S0108270194013351.
  2. ^ a b c d Ritz, Josef; Fuchs, Hugo; Perryman, Howard G. (2000). "Hydroxylamine". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a13_527. ISBN 3527306730.
  3. ^ Oblath, S. B.; Markowitz, S. S.; Novakov, T.; Chang, S. G. (December 1982). "Kinetics of the initial reaction of nitrite ion in bisulfite solutions" (PDF). The Journal of Physical Chemistry. 86 (25): 4853–4857. doi:10.1021/j100222a005.
[edit]