This article needs additional citations for verification. (July 2017) |
A synthetic radioisotope is a radionuclide that is not found in nature: no natural process or mechanism exists which produces it, or it is so unstable that it decays away in a very short period of time.[1] Frédéric Joliot-Curie and Irène Joliot-Curie were the first to produce a synthetic radioisotope in the 20th century.[2] Examples include technetium-99 and promethium-146. Many of these are found in, and harvested from, spent nuclear fuel assemblies. Some must be manufactured in particle accelerators.[3]
Production
editSome synthetic radioisotopes are extracted from spent nuclear reactor fuel rods, which contain various fission products. For example, it is estimated that up to 1994, about 49,000 terabecquerels (78 metric tons) of technetium were produced in nuclear reactors; as such, anthropogenic technetium is far more abundant than technetium from natural radioactivity.[4]
Some synthetic isotopes are produced in significant quantities by fission but are not yet being reclaimed. Other isotopes are manufactured by neutron irradiation of parent isotopes in a nuclear reactor (for example, technetium-97 can be made by neutron irradiation of ruthenium-96) or by bombarding parent isotopes with high energy particles from a particle accelerator.[5][6]
Many isotopes, including radiopharmaceuticals, are produced in cyclotrons. For example, the synthetic fluorine-18 and oxygen-15 are widely used in positron emission tomography.[7]
Uses
editMost synthetic radioisotopes have a short half-life. Though a health hazard, radioactive materials have many medical and industrial uses.
Nuclear medicine
editThe field of nuclear medicine covers use of radioisotopes for diagnosis or treatment.
Diagnosis
editRadioactive tracer compounds, radiopharmaceuticals, are used to observe the function of various organs and body systems. These compounds use a chemical tracer which is attracted to or concentrated by the activity which is being studied. That chemical tracer incorporates a short lived radioactive isotope, usually one which emits a gamma ray which is energetic enough to travel through the body and be captured outside by a gamma camera to map the concentrations. Gamma cameras and other similar detectors are highly efficient, and the tracer compounds are generally very effective at concentrating at the areas of interest, so the total amounts of radioactive material needed are very small.
The metastable nuclear isomer technetium-99m is a gamma-ray emitter widely used for medical diagnostics because it has a short half-life of 6 hours, but can be easily made in the hospital using a technetium-99m generator. Weekly global demand for the parent isotope molybdenum-99 was 440 TBq (12,000 Ci) in 2010, overwhelmingly provided by fission of uranium-235.[8]
Treatment
editSeveral radioisotopes and compounds are used for medical treatment, usually by bringing the radioactive isotope to a high concentration in the body near a particular organ. For example, iodine-131 is used for treating some disorders and tumors of the thyroid gland.
Industrial radiation sources
editThis section needs expansion. You can help by adding to it. (July 2017) |
Alpha particle, beta particle, and gamma ray radioactive emissions are industrially useful. Most sources of these are synthetic radioisotopes. Areas of use include the petroleum industry, industrial radiography, homeland security, process control, food irradiation and underground detection.[9][10][11]
Footnotes
edit- ^ Libessart, Marion. "Artificial Radioisotope". RJH - Jules Horowitz Reactor. Retrieved 2024-09-05.
- ^ Libessart, Marion. "Artificial Radioisotope". RJH - Jules Horowitz Reactor. Retrieved 2024-09-05.
- ^ "Radioisotopes". www.iaea.org. 2016-07-15. Retrieved 2023-06-25.
- ^ Yoshihara, K (1996). "Technetium in the environment". In Yoshihara, K; Omori, T (eds.). Technetium and Rhenium Their Chemistry and Its Applications. Topics in Current Chemistry. Vol. 176. Springer. doi:10.1007/3-540-59469-8_2. ISBN 978-3-540-59469-7.
- ^ "Radioisotope Production". Brookhaven National Laboratory. 2009. Archived from the original on 6 January 2010.
{{cite web}}: CS1 maint: bot: original URL status unknown (link) - ^ Manual for reactor produced radioisotopes. Vienna: IAEA. 2003. ISBN 92-0-101103-2.
- ^ Cyclotron Produced Radionuclides: Physical Characteristics and Production Methods. Vienna: IAEA. 2009. ISBN 978-92-0-106908-5.
- ^ "Production and Supply of Molybdenum-99" (PDF). IAEA. 2010. Archived (PDF) from the original on 2022-10-09. Retrieved 4 March 2018.
- ^ Greenblatt, Jack A. (2009). "Stable and Radioactive Isotopes: Industry & Trade Summary" (PDF). Office of Industries. United States International Trade Commission. Archived (PDF) from the original on 2022-10-09.
- ^ Rivard, Mark J.; Bobek, Leo M.; Butler, Ralph A.; Garland, Marc A.; Hill, David J.; Krieger, Jeanne K.; Muckerheide, James B.; Patton, Brad D.; Silberstein, Edward B. (August 2005). "The US national isotope program: Current status and strategy for future success" (PDF). Applied Radiation and Isotopes. 63 (2): 157–178. doi:10.1016/j.apradiso.2005.03.004. Archived (PDF) from the original on 2022-10-09.
- ^ Branch, Doug (2012). "Radioactive Isotopes in Process Measurement" (PDF). VEGA Controls. Archived (PDF) from the original on 2022-10-09. Retrieved 4 March 2018.
External links
edit- Map of the Nuclides at LANL T-2 Website Archived 2004-04-04 at the Wayback Machine